Used Briquette Press for sale (27,834)

Condition: used, Year of construction: 1996, Manufacturer: Bogma Model: M75 Cabxpdsmqo Year of manufacture: 1996 Capacity: 2700 - 3600 kg/h Complete briquette line. - Mooving flor - Screw conveyor - Screw conveyor - Screw conveyor - Feeding system for Bogama 2pc - Three Bogma (briquette press) - One Bogma for spereparts - Pipes for ready briquettes - All hydraulic - All electric, control - Walking platforms etc

Condition: as good as new (ex-display), Year of construction: 2023, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Including 1 year warranty. Your advantages: + Very robust, simple technology + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine C7M2Mgj Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to a maximum of 20 kg/h. *depending on material Machine dimensions approx. 137 x 75 x 148 cm (length x width x height), Weight of the machine: approx. 250 kg, Capacity of the silo: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: -Wood chips and dust smaller than 15 mm in length -Moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear --- Options at extra charge: --Timer function + 490 € net Machine is started manually and switches off automatically after a set time X. -Level indicator for automatic operation + 1450 € net Press starts and then stops automatically * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + 890 € net (delivery time then approx. 8 weeks) - Special pressing units + 2.950 € net ---

Condition: used, Year of construction: 2005, Briquette press POR A 100 N Year of construction 2005 Motor 7.5kW (10hp), 400V Diameter briquettes 65mm E2Popxe Max briquettes length 50/300mm Diameter inlet 1200mm Dimensions 1350*2115*H1700mm, weight 1000kg

Year of construction: 2008, Condition: good (used), Briquetting machine 18kw Bqgfpw0Tw8 Works very well

Condition: ready for operation (used), Technical characteristics Power consumption of hydraulic power pack : 5.5 kW Production capacity depending on material, e.g. for a bulk weight of approx. 250 kg/m3 : 30 to 50 kg/h Briquette diameter : 50 mm 100-liter oil tank built in boiler construction Main cylinder, feed cylinder, gripper cylinder Holding clamp Electrical panel with PLC Temperature and oil level monitoring device, E2Op2Uu Hardened steel compression cylinder, Automatic briquette length adjustment system Connection for briquette discharge pipe. Insalled options : Bottom plate, screw extraction, silo unloader Hopper 1040 x 1040 mm Paddle level sensor Oil preheating Power and Motors Voltage: 380 V Pluging: Three-phased Power: 5,5 Kw Motor: 7,5 CV Overall dimensions

Year of construction: 2009, Condition: used, Revolver briquetting press RUF type RBK 55/2500/120 S Hydraulic pellet press or briquette press for grinding sludge, metal chips, or the like make no. 70002 year of construction 2009 Briquette diameter 120 mm Briquette length in the pre-compressor approx. 120 mm Pressing force in the pre-compressor 30 tons at 260 bar Briquette length in the main compactor approx. 80 mm Pressing force of the main press cylinder 250 tons at 260 bar Stroke size of the main press cylinder 120 mm Pressing force of the counterpressure cylinder 250 tons at 260 bar Stroke size of the counterpressure cylinder 15 mm Piston diameter of the main press cylinder 350 mm Pressing stroke cycle time approx. 30 sec. for grinding sludge with low residual oil content Hopper size of the screw conveyor 1000 x 600 mm Motor power hydraulics 37 kW Mains connection 400 Volt, 50 Hz, 45 kW - Revolver with 5 stations for large material throughput - Precompressor stage for material pressing into the turret disc - 2 pcs. opposing main press cylinders with 120 mm and 15 mm stroke - ejection cylinder for ejecting the finished briquettes from the turret disc - stepless adjustment of hydraulic speed for each pressing stage - was used for grinding sludge from metal processing - material hopper as hopper with screw conveyor - in 2018 the machine was overhauled in the RUF factory - in 2020 a new SIEMENS Simatic touch panel was installed - only few operating hours after the overhaul very good condition grinding sludge recycling - big saving by the cooling lubricant recovery - large savings in disposal costs due to the reduction in volume and weight of the grinding sludge - Grinding sludge briquettes with low residual oil content can possibly be classified as ?non-hazardous waste? B2Afyzgv70

Condition: good (used), Briquetting press for aluminum chips / grinding sludge Motor: 4 kW Briquette diameter: 60 mm High pressing pressure: 2,500 kg / cm² Bu3Tqbhs8I Throughput up to a maximum of 60 kg / h * Details after test

Condition: used, Year of construction: 2009, Briquette press Udlm0Yyv2R H&ouml cker Polytechnik BrikStar C 4-12-R Serial no. 183406 Year of construction 2009 4.0kW, 400V50kg/h Briquette diameter 65mm Dimensions: 1640x1260xH3600mm, weight +/-950kg

Condition: new, Year of construction: 2024, Production time of the machine approx. 3.5 months Very robust machine with high pressing force - is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to faults + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + € 3,995 net, (can also be retrofitted later) * cools the press tongs (important from 3.5 hours) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compressor chamber + € 1,975 net recommended for light starting materials such as wood shavings Product code: 84793010 Briquette diameter: 65 mm Front bush: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Output (depending on material): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Bhm2D8Ztcp Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 qbm Pump: 37 liters Hydraulic pre-compressor Cooling press tongs option: yes, with special accessory Coolable press tongs Cooling of the pressing tongs via water tank (to be procured on site) Hydraulic oil cooling option: yes Fill level monitoring option: yes Briquette option: yes (depending on material) CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18 % - Chip length maximum 15 mm - Installation temperature: tempered room at a minimum of +5°C - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result

Year of construction: 2016, Condition: used, Briquette press Strautmann BrikPress 240 HP ES 30 Year of construction 2016 Surface load 700 kg/m&sup2 400V Motor power 30kW fused 100Amp category C Mzww3N8 Press force 380kN Briquette dimensions 240x240mm User manual available Dimensions 5460x2244x2654mm, weight 5000+1600kg

Condition: good (used), Year of construction: 2007, Functionality: fully functional, Drive motor: 4 kW Throughput capacity up to max.: 75 kg/h (depending on material) Press pressure: approx. 3,700 kg/cm² Dpsnhp Briquette size: 60 x 40 mm

Condition: used, Year of construction: 2004, Briquetting press + Extraction + material separator HOU.2466&nbsp Briquette press Bpv28Rayp8 H&ouml cker Polytechnik BrikStar C 3-12-L Serial no. 330227 Year of construction 2004 3.0kW, 400V 30 kg/h Briquette diameter 65mm Dimensions 1800x1700x1350 mm (LxBxH) HOU.2467 Extraction Herding HSL 1500-8-12/8 S Serial no. 9473 Year of construction 2001 Filter surface 26.4m&sup2 Capacity 2500m&sup3 /h Own weight 1050kg Dimensions 1000x1050x2850 mm (LxBxH) HOU.2467a&nbsp Material separator Kongskilde KS5

Condition: good (used), Year of construction: 2019, Used machine with 1,070 operating hours Dpp9Ab Your special price 39.750 € net Including cooling unit (used) Throughput capacity: up to a maximum of 350 kg/h (depending on material) *Depending on the bulk density *based on a bulk weight of 250 kg per cubic meter Briquette diameter: 70 mm Storage container approx. 1 m³ capacity Hydraulic pre-compressor Hydraulic unit with 600 liter oil tank Pump 1: 18.5 kw / 120 liters Pump 2: 7.5 kw / 60 liters Agitator discharge: 1.5 kw Dimensions: approx. 2500x1500x1730mm lxwxh Weight: approx. 2300 KG CE compliant Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6% and a maximum of 15% - Maximum chip length 15 mm - Installation temperature: tempered room at a minimum of +5°C - The customer must protect himself against loss of hydraulic oil - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result

Condition: used, Year of construction: 2007, Extraction system used for paper dust. Extraction H&ouml cker Polytechnik Serial no. 368601 Year of construction 2007 Return airFilter surface 147m&sup2 Filter category M Main fan 37kW Briquette press H&ouml cker Polytechnik BrikStar C 3-12-R Dpbr8T Serial no. 368601 Year of construction 2007 3.0kW, 400V 30 kg/h Briquette diameter 65mm Material separator H&ouml cker Polytechnik PMA-U 120/12/1.50 Capacity 25,000 m&sup3 /h Year of construction 2007 Dimensions: 1390*1390*1700mm, Weight 930kg

Condition: new, Year of construction: 2024, ready produced Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Bst09Lehrk Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: used, Year of construction: 2004, Operating hours: 9,684 h, Briquette press Weima TH 400 Year of construction 2004 Briquette diameter 60mm Capacity 100-120kg/h Machine No. 960-684 Main engine 7.5kW 190 Bar, 400V Dimensions 1700*2100*H11300mm, weight 1000kg Bk9Vdtnbdzd

Condition: new, Year of construction: 2024, Completion: approx. week 40 Very robust machine with high pressing force - is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to faults + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for demonstration cooling unit + 4,980 € net, (can also be retrofitted at a later date) * Cools the press tongs (important from 4 hours) and the hydraulic oil * Cooling unit recommended for regular operation of more than 4 hours at a time. Product code: 84793010, Briquette diameter: 70 mm, Front bush: 125 mm, Beyiwm8Wjh Briquette stroke max.: 100 mm, Briquette stroke opt.: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk weight, *based on a bulk weight of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 Volt / 50 Hz / 3-phase, Length: 2095 mm, width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil volume: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling press tongs option: yes, with optional cooling press tongs Hydraulic oil cooling option: yes Cooling of the press tongs and hydraulic oil with cooling unit (special accessory) Fill level monitoring option: yes Briquette option; yes (depending on material) Enlarged filling slide option: yes, with special accessory Enlarged filling slide CE compliant Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18 % - Maximum chip length 20 mm - Installation temperature: tempered room at a minimum of +5°C - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result

Condition: used, Year of construction: 1995, Briquette press RSN SP 90/12 Capacity 90 kg/h. Max pressing force 27T Briquette diameter of 60mm Pump motor power 7.5kW Wood moisture max 20% Bjyrwqfaaug Dimensions: 1910x1860x1300, weight 820kg

Condition: new, Year of construction: 2024, Delivery time approx. 4-5 months . Throughput capacity: up to a maximum of 90 kg/h (depending on material), Briquette diameter: Ø 50 mm, Motor: 5.5 KW, 400 Volt / 50 Hz / 3-phase, Bixvstdg Pump: 40 liters, . Briquette length max.: 50 mm, Briquette length opt.: 40 mm, Diameter silo: 1,000 mm, Oil tank 110 liters . Dimensions: 1750x1130x1100 mm lxwxh Weight: 680 kg. . Hydraulic pre-compression via slide valve Main press cylinder Vertical cylinder . Level indicator: yes . Requirements for the starting material - Max. chip length: 15 mm - Installation temperature: tempered room at a minimum of +5°C - Max. Weight on agitator: 200 kg. - The feed must be free of magnetic metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result

Condition: good (used), Technical data: Briquetting press RUF RB 440 Press capacity when pressing wood: up to a maximum of 440 kg/hour Material moisture: maximum 15 % Motor power: approx. 30 kW Briquette size; rectangular: 150 x 60 mm Length: 40 - 110 mm Dpfqav Dimensions approx. 1680 x 1800 x 2000 mm Weight: 3000 kg

Condition: good (used), Briquetting press for aluminum chips Includes: Dpfp8P + Emulsion pump and trough under the machine + 3-screw feeding system (minimizes bridging) + High pressing pressure + Oil cooler Motor: 4 kW Throughput up to a maximum of 150 kg / h *depending on material Details after test Press pressure 1,600 kg / cm² Briquette: Round; 80 mm diameter Year of construction 07/2018

Condition: good (used), Good, used condition Few operating hours Motor: 11 kW Dpflyd Throughput up to a maximum of 200 kg / h Briquette: 150x60 mm

Condition: new, Year of construction: 2024, Briquetting press NEM 900: production time appr. 5 months for briquetting aluminum chips Throughput: up to maximum 320 kg / h * more details after a free test with heard material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical specifications: Total connection: approx. 31 kW In continuous operation approx. 22 kW 400 volts / 50 Hz / 3 phases Pump: 120 + 60 liters per minute Silo: 1 m³ Silo rollers: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm lxwxh Weight: 2250 kg. Hydraulic pre-compression via slide Main press cylinder Bq9Ixnblmu Vertical cylinder Above for connecting a cooling unit . One and the source material - max.span: 18 mm - Excessive temperature: temperate room at at least + 5 ° C. - max.weight on agitator: 200kg. - The loading must be free of metals and mineral impurities such as sand, stones, etc. This on the pressing tools and / or responsible wear can result

Condition: as good as new (ex-display), Year of construction: 2023, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) Demonstration machine with approx. 10 operating hours Your advantages: + Very robust, simple technology + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Technical data: Briquette dimensions: approx. 35 x 35 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity up to 25 kg / h *depending on material Machine dimensions approx. 137 x 75 x 148 cm (length x width x height), Weight of the machine: approx. 250 kg, Capacity of the silo: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Cn7Ytuppw Raw material requirements: -Wood chips and dust smaller than 15 mm in length -Moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear --- Options at extra charge: -Timer function + 490 € net Machine is started manually and switches off automatically after a set time X. -Level indicator for automatic operation + 1450 € net Press starts and then stops automatically * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, C7m2mgj Surcharge + 690 € net (delivery time then approx. 8 weeks) ---

Condition: as good as new (ex-display), Year of construction: 2023, Delivery time *depends *Prior sale expressly reserved *Round silo at extra charge Press can only be supplied with a system component such as a chipper, cutting mill, hammer mill, screw conveyor, conveyor belt with overbelt magnet or suction Hydraulic briquetting press for rectangular briquettes Type R - throughput up to maximum 500 kg / h * depending on the specific weight of material. Based on a bulk weight of 220 kg / m³. + 24h operation possible + Longevity + Low maintenance costs Ct33Csvc8 + Compact structure + High energy efficiency thanks to innovative hydraulics + 25 years of experience . * depending on the bulk weight of your raw material * based on a bulk weight of 200 kg per cubic meter Detailed information after a successful test with your material . Drive motor: 22 kW - IE 3 400 V / 50 Hz / 3 phases Oil cooler: 2.2 kW Agitator: 0.55 kW Screw: 1.5 kW . Hopper: 400x800mm Capacity of approx. 150 liters . Soft start for hydraulic motor Siemens PLC S7-1200 . Auto start and stop via a light barrier integrated in the feed hopper Up to 560 briquettes per hour . Specific pressing pressure: 1,700 kg / cm² Up to 300 bar pressing pressure Briquette format 150x60 mm Briquette length: 40 to 110 mm (adjustable) Dimensions: 2.9 x 2.0 x 2.1 m Weight: 3,800 kg. 600 liter hydraulic oil tank The control is designed for operation from + 10 degrees to +35 degrees . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 15% - Maximum chip length: 20 x 2 x 2 mm - Installation temperature: temperature-controlled room at at least + 8 ° C Otherwise, we recommend heating for an extra charge - The loading must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear can be the result.