Ott throughfeed press
Type Throughfeed press D 99
Cori83p
Manufacturer Ott, Lambach
machine-no. 13535
year of construction: 1983
technical data:
Press area 2800 x 1400 mm
With Mylar belt
pressure 4,7 kg/ cm²
Pressing pressure 280 t
Cylinder stroke 150 mm
8 cylinders each 90 mm diameter
With infeed and outfeed transport 3,200 mm + 2,800 mm
Total length 9.400 mm
For hot water 60.000 kcal
Connected load 10 kW
Press head 750mm x 430mm
Table length 8m [ extendable ]
Pressure 15 tons
Bn0cobjawx
Manual press head movement
2 button safety control for pressing
Serial nr - 19-2017-52562
Delivered - February 2018
Condition - Very Good
Complete line consists of:
1. Continuous press
Pressing area 3500 x 1900mm
Plate length 3500 mm
Plate width 1900 mm
D909ev
Pressing force 3kg /cm2
Number of cylinders 15
Diameter of the cylinder 85 mm
Medium the hot plates - hot water
Infeed conveyor belt
- width 3700 mm
- length 2450mm
Outlet conveyor belt
- width 3700 mm
- length 3200mm
2. Pillar jib crane with chain hoist and vacuum lifter
3. Column jib crane with chain hoist and gripping device
Machine was used to produce glued cover layers (2 bars or multiple bars).
Special feature: press can press veneers from 3,5mm and
Maximum length: 2,50m
Eycy8bkkg
Machine has few operating hours
press area 1800 x 900 mm
press force 450 kN
spec. pressure 28 N/ cm2
press cylinder DM 90 mm
revolving press belt
medium heating platen
electric connectivity 4,4 kW, 400 V, 50 Hz
overhead operating panel
control unit, SPS programmable
digital temperature adjustment 2 x
incl. infeed/ out feed transport belt approx. 2000 x 1000 mm
incl. light barrier sensor
Bcbldzs92z
Advise used machines:
• Technical data without obligation, mistake and intermediate sale reserve.
• Price is considered ex-lo...
Sample - production on customerdemand:
Press area: 3500 x 1350 mm
No. of cylilnders: 8 pcs.
Diameter of cylinders 85 mm
Specific pressure: 3,4 kg/cm² (with 350 bar), based on 80 % of the press area
Press force: 16 - 160 TO
Max. operating temperatur: 120°C
Heating power: 230/400 V, 12,7 kW / heating plate, separately adjustable
Stroke / opening: 400 mm
Closing / opening speed: approx. 20 mm/sec
Working height: ~900 mm
Belt speed: max. 15 m/min
Fnyexv9wy
Throughfeed press line Wild
type: Optima
year of manufacture: 1992
with infeed band and destacker
At the infeed side:
Veneer laying table with 3 shelfs for veneer
L 3600 mm x W 1350 mm
Infeed band type: PB/F II 3000
with lifting facility to feed the 2 floors of the press
type: PB/F II 3000
L 4000 mm x W1350 mm
2 transport bands each 650 mm wide each with drive and moveable to the side
to feed the press in 2 rows
Throughfeed press Wild
type: Optima 2 x 1
pressing plate size L 3600 mm x W 1400 ...
Throughfeed hot press - ITALPRESSE P25-21/7
year of manufacturing 1999
drilled solid steel platens dimension 2500x2100 mm
platens thickness 90 mm each
No. 12 vertical cylinders diameter 100 mm each
daylight approx 130 mm
2rtste
total vertical pressure 300 tons
pressure of 7 kg/cm2 (on 80% of total pressing area)
automatic loader with disc conveyor 3300x1300 mm and motorized belt 2500x3200 mm
automatic downloader with motorized belt 2500x3200 mm
accessories not included: general electric cabinet ...
Pressing surface: 3150 x 1600 mm
Total pressure surface: 150 to
specific pressure: 30 dAN/cm²
operating pressure 350 bar
Daylight height: 200 mm
Throughfeed belt speed: 22 m/min
Jgbp7oejb
Loading from the wide side
heating platens for heating with hot water maximum temperature 130°C
The increased income significantly shortened the planned amortisation time. According to our satisfied customer, this investment – a large one by its standards – was one of its very best decisions.
3-fold capacity increase as compared to conventional production methods with veneer presses
Adaptation of the plant to the customer specifications
Best ergonomic design
Pilot laser systems ease placing the boards
Goupbt7
Fully-automatic measuring of the components and cylinder shu...
Total press force: 120 to
Size: 3000 x 1350 mm
Spez. Pressure: 6 kg/cm²
Number/Diameter cylinders: 6 pcs. / 85 mm
Max. opening/stroke: 400 mm
Side pressing cylinder: 8 pcs.
Side pressure force: 24 tons
This two-in-one press finds application where solid wood is being worked and also allows the pressing of veneers. When pressing veneers using the Model MHP, the procedure is the same as by all standard models.
Vwallx9e
This machine has a special hydraulic cycle which is to activated when pressin...
Sample - production on customerdemand:
This heavy press series, constructed as a down-stroke machine, has been designed especially for high specific pressure. Due to the high specific pressure, this state-of-art model comes with drilled steel heating plates. The control unites are located in a central switch console. The design is corresponding to our newest developments in technology.
Vv9xk3ep
Press construction:
- Lengthwise feed gantry construction (gantries = solid steel frame)
- Cross ...
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.