Briquetting press Genius 1/40

Gross Apparatebau GmbH Brikettierpresse GP Genius 2/40

Condition: as good as new (ex-display), Year of construction: 2026, S&F drum chipper type ATH 220x530/3 Demonstration machine / trade fair machine / new machine Solid design with long service life Feed height: 200 mm Fpsdpfx Ajw I R Rnokvjk Feed width: 500 mm Number of chipper knives: 2 pieces Number of counter knives: 1 piece Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 pieces Throughput rate: up to approx. 20 rm/h * Chipping length: approx. 30 mm Chipper drive power: 45 kW or on request Feed roller drive power: 2 x 2.2 kW Operating/control voltage:400/220 V, 50 Hz Weight: 2,600 kg *depending on chipper length, kW main motor, number of knives, feed S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: ready for operation (used), Year of construction: 1981, WEINIG Hydromat H25R, S/N 2603-624, year of manufacture 1981, with walk-in acoustic enclosure KASCHWIG – ALMOST NEW from 2017 • Short infeed table with heavy-duty 6-roller infeed 1st spindle bottom 11.0 kW 2nd spindle right 11.0 kW 3rd spindle left 11.0 kW 4th spindle top 15.0 kW 5th spindle bottom 11.0 kW 6th spindle bottom 11.0 kW • Hydraulic feed 6-60 m/min. • Feed motor 22.0 kW • 4x powered table rollers • Spindle diameter 50 mm • Automatic table lubrication • Spindles 1 + 4 + 5 + 6 with counter-bearings • Spindles 1 + 4 with straight jointer • Feed rollers 170 mm • 4 pcs. hydro planer heads 150 mm Fsdpfjtkt Tpox Akvepk • 6 pcs. hydro planer heads 250 mm • Extraction hood above the machine

Condition: new, functionality: fully functional, Year of construction: 2025, container length: 20 ft, 🚢 20ft Storage Container – Like New (Year of Manufacture 2026) – Available Immediately! High-quality shipping container in near-new condition – perfect as storage space, workshop, construction site container, or for professional transport. ⭐ Your Advantages at a Glance 🆕 Year of Manufacture 2026 – like new 💪 Very stable steel construction (2 mm wall thickness) 🌧️ Wind- and waterproof 🔐 Securely lockable with a 4-point door locking system 🚚 With CSC plate – transportable worldwide 🌬️ With ventilation to prevent moisture 🪵 High-quality wooden floor 🛠️ Forklift pockets in the floor 📏 Dimensions & Technical Data 📐 External Dimensions: 6,058 × 2,438 × 2,591 mm 📦 Internal Dimensions: 5,898 × 2,350 × 2,390 mm 🚪 Door Opening: 2,343 mm 🧱 Volume: approx. 33 m³ ⚖️ Tare Weight: approx. 2.25 t 🏋️ Payload: up to 30 t These containers impress with their durability, safety, and versatility – ideal for businesses, construction sites, trades, or demanding private use. 📬 Request a quote now – we will create an individual offer for you! Fpjdowu Uy Ujpfx Akvsk 👀 Other container sizes & variants available. 🚛 Delivery possible throughout Germany (for an extra charge).

Condition: used, Year of construction: 1997, Line 3 Stenner MHS9 machines from 1997 Fsdpow Nrhkefx Akvepk

Condition: excellent (used), High speed moulder infeed comprising a freestanding flat magazine in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 5.5kW hydraulic unit (max 140m/min). A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814. Fodpfswgbxzsx Akvopk

Condition: good (used), Year of construction: 2020, operating hours: 590 h, functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-link Additional hydraulic connection 70 l/min Fpjdpfx Asvnq Rkjkvek 24 V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding hopper with position sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Rubber quick-change pad Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the machine Irrigation LED work lighting Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary Fpjdpsu R Sxxjfx Akvok - New exhibition machine -

Condition: ready for operation (used), functionality: fully functional, LINDNER wood chipper for sawmill offcuts, model T 400/140-2 – after technical inspection – in very good condition – suitable for producing technological wood chips TECHNICAL SPECIFICATIONS: infeed width: 400 mm infeed height: 140 mm rotor diameter: 450 mm Fpedpjr Ak Rgsfx Akvsk rotor length: 400 mm main motor power: 33 kW infeed motors power: 2 x 1.5 kW number of knives: 2 pieces screen dimensions: 60 mm x 90 mm infeed rollers in very good condition feeder motor power: 1.5 kW feeder length: 4,200 mm transport dimensions (L/W/H): 430 / 240 / 150 cm weight: approx. 2,000 kg

Condition: good (used), Year of construction: 1972, Scissor lift table, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table -Manufacturer: Lödige, scissor lift table -Load capacity: 1000 kg -Platform: 3000 x 2000 mm -Dimension retracted: height 390 mm -Dimension extended: height 2000 mm -Hydraulic unit: Bauknecht 3 kW / 150 bar Fodpemghawsfx Akvopk -Transport dimensions: 3000/2000/H390 mm -Own weight: 2100 kg

Year of construction: 2019, condition: as good as new (ex-display), Aluminum flat conveyor including 4 suspension points Dim: 3000 + 520 x 105mm Fpsdpfed Ra Ttex Akvok Conveyor belt width 400mm PVC conveyor belt incl. Studs and wave edge * optional with magnetic deflection roller at the end of the conveyor belt. * optionally with substructure * Special designs in all versions possible.