Briquetting press Höcker Polytechnik for metals, type BrikStar MD 15/55, constructed 2010
Technical data:
Manufacturer: Höcker Polytechnik
Type: BrikStar MD 15/55
Year of construction: 08/2010
Drive power: 15 kW
Throughput: approx. 350 kg/h
Briquet cross section: 55 mm
Weight: 3200 kg
the specific pressing pressure on the material has the following approx. value:
- 317 megapascals
- 3170 bar
- 31.70 kN/cm³
- 3232 kg/cm³
Please note:
All technical data refer to specifications of produce...
The briquetting press GP Genius series was developed for briquetting chips and dusts especially. These high-performance, robust and high-quality machines compress homogenous material to form compact briquettes.
Briquette Diameter: 50 mm
Bscm2negas
Power: 7,5kW
Press Output per hour: upto 80 kg/h
Hopper opening: 1,40 x 1,40 m
Controlled by PLC
Hydraulic tank: 160l
used filter with briquetting press
Year of construction: 2004
Condition: maintained/demounted
Hose length 1500 mm
hose diameter 220 mm
Filter area 53 m²
Filter material BIA - C
incl. motorized vibration
Vibration control
Brfw08xh3h
Extinguishing pipe silo and filter
1 attachment ring 1900 x 1900 x 800 mm
1 fan 5,5 kW 300 mm
1 start-up controller 5.5 kW up to 6 machines
1 Votecs briquetting press HP 555
Year of construction: 2008
5.5 kW
Availability: by arrangement
Location: Röllbach
MIDI briquettes press installation (2012) A briquette press installation for pressing metal chips. The press uses the unique, dynamic two-cylinder principle where the material is pressed from two sides. This results in a higher pressure on the material than with a fixed press part. The MIDI briquette press consists of: 1. Augerbox 3m3 for storage of the chips and for dosing the chips to the press. The auger base consists of 6 augers, a side auger and a lifting auger, all driven separately by a ...
For Sale : Stansz shredder + Augerbox + briquetting press Using shredder and briquetting press techniques, waste streams are created that are sustainable and also extremely suitable to be recycled. Due to the unique 2-cylinder principle, the briquettes are pressed from two sides, resulting in a significantly lower residual moisture content and a high density of the briquette. Briquette press model: Midi Briquette diameter: 125 mm Maximum briquette height: 80 mm Capacity aluminium: 125 / 225 / ...
Demonstration machine with 2 operating hours
Briquette Diameter: 50 mm
Power: 5,5 kW
Press Output per hour: 40 to 60 kg/h
I3ustqrtk
Hopper opening: 1,0 x 1,0 x 1,0 m
Controlled by PLC
Hydraulic tank: 100l
warranty 12 months
List price of a comparable new machine: 15.700,00 €
Exhibition machine with 2 operating hours
Briquette Diameter: 40 mm
Power: 3kW
Press Output per hour: 30 kg/h depending on material
Hopper opening: 0,90 x 0,90 m
Controlled by PLC
Wwgqjovx
Hydraulic tank: 50l
warranty 12 months
List price of a comparable new machine: 11.000,00 €
For the industrial production of rectangular briquettes
The ZBP 500 briquettes pressable materials into highly compressed briquettes. The briquettes can be easily stored and transported due to their stackability. In the pressing chamber of the hydraulic pressing unit the briquettes are formed by means of a pressure cylinder. Thus, up to nine briquettes per minute can be produced with a pressing force of 1,000 -1700 kg/cm².
Standard equipment:
Safety limit switch for oil temperature, level
Oi...
The briquetting press ready for immediate use
Ytgskk
The briquetting press is designed for pressing sawdust and wood chips of all kinds into briquettes. The design of the briquetting press is compact, handy and produced in Germany. The large oil tank ensures that the oil cannot overheat during continuous operation. The briquetting press is immediately ready for use and does not have to be installed first - so plug in and go.
The briquetting press ZBP 40 was developed especially for small and medium-sized companies and convinces by a sensational price/performance ratio.
The design is compact and handy. With a width of less than one meter, the press fits through almost any door.
Ebnl792se
The briquetting press is suitable for the briquetting of wood shavings, sawdust, wood dust, wood chips, paper and polystyrene.
Further features of the ZBP 40
Optionally available hopper attachment for manual feeding (can also be de...
AT A GLANCE:
Variable container dimensions (on customer request)
Left- or right-hand version
Hydraulics with separate oil tank
All series can also be equipped as "DUO" variants
Brqtq8nuoh
Wood chips, sawdust, sawdust etc. accumulate in all craft and industrial enterprises of the wood processing industry. Every day enormous storage and transport costs are claimed for this. Briquetting presses offer an ideal solution for this, as briquettes, on the other hand, are easy and space-sav...
The AMIS briquetting press type ZBP 30 produces 30 mm briquettes. These briquettes can be ideally used for combustion in wood gasifiers and in smaller wood chip boilers / heating systems. Any material from a wood processing plant (chips, dust etc.) can be briquetted.
Wood chips, sawdust, sawdust etc. accumulate in all craft and industrial enterprises of the wood-processing industry. Enormous storage and transport costs are claimed for this on a daily basis. Briquetting presses offer an ideal sol...
Spindle Press Krause KgS
Year - Serial-No. KgS
Jiciqnz
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
-On Stock Emskirchen / Nürnberg - Can be test-
Forging line INVER PRESS LECCO 100 T built in Italy. Brass forgings were made on the line from a solid rod fi 19. After swelling, we get a diameter of fi 24. Product lengths: from 25 to 50 mm.
The forging line consists of the following devices:
1. INVER PRESS LECCO 100 TON forging press, eccentric with pneumatic clutch, pressure: 100 tons
- dimensions of the eccentric press (width x length x height): 1750 x 1100 x 2100 mm
2. AMYSA WMU V-10x induction device made in Italy:
- induction heating ba...
50 mm
roll diameter 150 mm
revolutions per minute 10 U/min
Tlvmt3hi
voltage 400 V / 50 V
adjustment movement hydraulic up to 120 mm
motor speed 1400 U/min
total power requirement 1,5 kW
weight of the machine ca. 430 kg
dimensions of the machine ca. 1200 x 800 x 1750 mm
pressure 60 t
stroke 380 mm
table surface area 750 x 260 mm
press capacity 588 kN
Pressure power 259 bar
working width 750 mm
pressing speed 2,07 mm/sec
Fg9qx9eb3
feed speeds 8,69 mm/sec
return speed 10,79 mm/sec
Ø 210 mm
total power requirement 1,5 kW
weight of the machine ca. 0,6 t
dimensions of the machine ca. 1,3 x 0,8 x 2,1 m
This 60 ton motorized workshop press with sliding cylinder is very robustly
built and manufactured in the Netherlands. The hydraulics work extremely
precisely in...
pressure 150 t
Bhxpscvk
stroke 450 mm
throat 350 mm
work speed 2 m/min
ajustment speed 10 mm/sec
return speed 16 mm/sec
pressure 320 bar
diameter of piston 50 mm
opening stroke 700 mm
table-size hinten / back 2000 x 500 mm
Table dimensions Main500 x 500 mm
total power requirement 4 kW
weight of the machine ca. 6,7 t
dimensions of the machine ca. 2,95 x 2,0 x 850 m
Cold press for engineering parquet
250mm wide
2600mm long
2 pozition
Capacity up to 1000m2 per 8 hour
16 cilinder x 92mm diameter
150 ton total presure
Euubpdoau
5.5kw hydraulic pump
Spindel Press Krause
Year - Serial-No. 190675
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
Eoaxjnybs
-On Stock Emskirchen / Nürnberg - Can be test-
Table size 2500 x 1300 mm
Total thrust 70 Ton
Stroke – total opening 400 mm
N. 4 of cylinders
Pistons D 70 mm
Vqos9i
Approx. weight 2400 kg
Fabricated assembled steel platen max. temp up to 120 ° C max working pressure 3-5 kg/cm2
Heating medium pressure 2,5 bar, it is composed by:
G) ALUMINIUM COVERING FOR A BETTER SURFACE FINISHING AND A BETTER HEAT PROPAGATION
H) FLAT GAUGED STEEL SHEET
I) Coil of piping for hot water/oil circulation
J) Reinforcement piping
K) Flat gauged steel plate, only f...
In this offer you acquire a used 5-colour production system "Xerox 1000 Colour Press".
Item for sale:
1 x Xerox 1000 Colour Press with the following equipment:
incl. Stacker LCS-1
incl. Finisher Interface Module A-GW01
incl. Paperdeck JCF-1
incl. FreeFlow Controller
Counter readings:
Total: Approx. 5,265,956 pages
Colour: Approx. 4,754,305 pages
Black: Approx. 511,651 pages
Condition:
This is a used machine and may show signs of use (minor scratches or yellowing).
(min...
pressure:400 t
distance between columns:1060 mm
stroke:450 mm
no. of strokes:15 - 30 /min
distance table/ram, max. stroke up, adjustment up:1160 mm
table surface area:1000 x 700 mm
capacity of ejector in table:2 x 16 t
ejector stroke of ejector in table:125 mm
Die cushion pressure in table:120 t
Die cushion stroke in table:2 mm
capacity of ejector in ram:2 x 4 t
Fe7ib0b
stroke of ejector in ram:100 mm
ram surface:1000 x 700 mm
column travel -side:630 mm
power capacity:55,0 kW
weight:50,0 t
die c...
pressure 28 t
stroke 180 mm
table-size 300 x 550 mm
total power requirement 4 kW
weight of the machine ca. 0,650 t
diameter of piston 180 mm
working feed 2 mm/sec
return speed 20 mm/sec
pressure capacity max. 200 bar
Stddfg
toolpiece height min. 200 mm
dimensions of the machine ca. 1150 x 750 x 1103 mm
This horizontal straightening press is designed for a wide variety of bending, profiling and straightening operations. ?
?The application of this Profi Press horizontal bending / straightening...
⢠Minimal footprint
⢠Height continuously adjustable
⢠Suitable for 2- and 4-up
Low-cost shipping The Smart Stacker XXS has been developed in order to enable CtP users in the 2- and 4-page format a space-saving and cost-effective possibility of plate stacking. On a footprint of only 640 x 658 mm, up to 100 plates are automatically stacked by that stable âlightweightâ made in Germany. Low-cost shipping due to a package size of 118 x 78 x 17 cm (L x W + H) and weight of only 17 kilograms...
pressure 100 t
stroke 380 mm
table: 1740 x 996 mm m
daylight between the columns 1050 mm
daylight - vertical 600 mm
total power requirement 2,2 kW
weight of the machine ca. 1,6 t
dimensions of the machine ca. 1,7 x 1,7 x 2,2 m
Gvufe0
Unique Cold Hydraulic Press Specially Designed for Engineered Wood Flooring (Parquet) Production
Cold Press CP 250/3800
Technical parameters:
• Max gluing width - 250 mm
• Max gluing length - 3840 mm
• Max gluing height - 900 mm
• Working height (static) - 800 mm
• No of pressing cylinders (total) - 24 pcs
• No of pressing cylinders per cycle - 4 cycles x 4 cyl.; 4 cycles x 2 cyl.
• No of independent pressing cycles - 8
• Pitch between pressing cylinders - 320 mm
• Each cylinder has its own s...
In this offer you buy a used colour production system "Minolta Bizhub Press C1100
Object of sale:
1 x Minolta Bizhub Press C1100 with the following equipment:
incl. PB-503 adhesive binder
incl. PF-707 large capacity magazine with suction feeder for up to 3x 3,240 sheets up to A3 oversize (RRP 11,742.00€)
incl. RU-511 cooling/smoothing unit (RRP 6.901,00€)
incl. HM-101 remoistening unit (RRP 7.365,00€)
incl. IC-308 External EFI Fiery PRO80-25 print controller
counter rea...
pressure:400 t
distance between columns:1100 mm
stroke:250 mm
no. of strokes:25 - 75 /min
distance table/ram, max. stroke up, adjustment up:900 mm
table surface area:1100 x 965 mm
2wdpz2jj
capacity of ejector in table:30 t
ejector stroke of ejector in table:80 mm
capacity of ejector in ram:3 t
stroke of ejector in ram:60 / 70 mm
ram surface:980 x 800 mm
column travel -side:800 mm
ram adjustment:20 mm
power capacity:80,0 + 5,5 kW
weight:47,0 t
Dimensions (WxDxH):3,5 x 3,3 x 6,0 m
weight of switch...
pressure 400 t
stroke 450 mm
throat 450 mm
work speed 2,1 m/min
ajustment speed 9,5 mm/sec
return speed 12,5 mm/sec
pressure 320 bar
diameter of piston 60 mm
opening stroke 1100 mm
table-size hinten / back 2500 x 750 mm
Table dimensions Main 750 x 750 mm
total power requirement 11 kW
weight of the machine ca. ca. 20 t
dimensions of the machine ca. 3,75 x 2,5 x 0,95 m
The straightening and forming presses have been specially developed
for straightening and bending profiles, bars and beams. ...
Good working condition
Manufactured in Romania
YOM: 1986
Mechanical
Pressing nominal force: 10,0 MN
Number of strokes/min: 20
Brg0g2i9k7
Ram stroke: 310mm
Work surface: 2290mm x 1600mm
Total dimensions: 7880mm (6880 from the ground) x 4150mm x 2350mm
Total weight: 108009kg
pressure 50 t
stroke 250 mm
Beojfhitbb
throat 265 mm
table: 700 x 450
ram surface 550 x 300 mm
total power requirement 4 kW
weight of the machine ca. 1,7 t
Unique Cold Hydraulic Presses Specially Designed for Engineered Wood Flooring (Parquet) Production
Technical parameters of our standard models:
- Max gluing widths - From 200 to 320 mm (Up to 500 mm upon order)
- Max gluing length - 2560 mm to 3840 mm (Unlimited upon order)
- Max gluing height - 800 mm
- Working height - From 800 to 850 mm
- No of pressing cylinders (total) - From 16 to 24 pcs (Unlimited upon order)
- No of independent pressing cycles - From 4 to 12 cycles (unlimited upon orde...
In this offer you will purchase a used color production system "Xerox Versant 80 Press "
Item for sale:
1 x Xerox Versant 80 Press with the following equipment:
incl. Staple Finisher A-Fn07
incl. Paperdeck A-CF-1
incl. Fiery E200-08
Meter readings:
Total: Approx. 730,183 pages
Color: Approx. 263,720 pages
Black: Approx. 466,463 pages
Condition:
This is a used unit and may show signs of use (minor scratches or yellowing).
Stzc28
(minor scratches or yellowing) may show.
...
Cutting length: mm 3100
Cutting thickness: mm 4
Recess: mm 500
Steel basement supports sheet metal.
Motorized rear register.
NEW MAPER programmer for rear register stroke visualization.
Cutting angle adjustment.
Bmc9kvfx0x
Cutting blade stroke adjustment.
Sheet-metal support brackets supplied.
50 mm
roll diameter 150 mm
revolutions per minute 10 U/min
adjustments 120 mm
total power requirement 1,5 kW
weight of the machine ca. 430 kg
dimensions of the machine ca. 1,2 x 0,8 x 1,75 mm
The PB 50-3 H is a hydraulic profile bending machine: we produce
thisprofilebender in Europe and deliver it directly from our stock.
This hydraulic profile bending machine has a shaft diameter of 50 mm and 3
Benmpar7my
driven rolls. It is easy to switch between working with two or three driven
rolls ...
Good working condition
Manufactured in Romania
YOM: 1986
Hydraulic
Ram stroke: 700mm
Nominal working pressure: 320 bar
Working direction: Up to Down
Work surface: 2000mm x 2400mm
Fast approach speed: 200mm/sec
Working speed: max.50mm/sec
Return speed: 250mm/sec
Maximum height from the ground: 8000mm
Weight: 120000Kg
Brgz07z8jv
Strippit single station non cnc punch press
With plenty of tooling
TONNAGE …………….. 30 TON
THROAT DEPTH …………… 30″
MAXIMUM HOLE DIAMETER …………… 3.5″ DIA. IN 12 GA.
MAXIMUM MATERIAL THICKNESS …………. 1″ DIA. IN .250
TABLE SIZE …………….. 72″ W X 48″ D
SHEET SIZE …………….. 30″ X 30″
Ocs3x
STROKE LENGTH …………….. 5/8″
HITS PER MINUTE …………… 165
MOTOR ……………. 1 HP
WEIGHT …………… 3,000 KGS
Press-vite ironing / steam table 4 whirlpool hoods, 9000W BJ. 2002, Pr12LP +.
You buy a hanger system
Ironing / steam table press vite, with 4 adjustable hot tub covers, and 2 steam generator / en working width approx. 340 cm, 380VPr12LP - 9000W
Dv7r7m
BJ 23.10.2002
Control GE VAT20 U20NOK7S
BJ. 16.02.2002
Find more articles in our shop!
Article number 17746;
For inquiries please specify;
1 x Xerox 700 Digital Colour Press included
- Fiery Controller E10-02
- Booklet finisher JGW-1 + feeding unit
Betdf78fn2
Counter reading: Total approx. 2,017,686, thereof color 1,605,360, SW approx. 412,326
Features:
- 71 DIN A4 pages / minute B/W
- 71 DIN A4 pages / minute Colour
- Paper formats: DIN A5 - DIN A3
- Grammages: 64 - 300 g/m²
- Cassette: Max. 5,900 sheets
Manufacturer information:
The ideal solution for digital production printing
The Xerox 700 Digital Color Press opens up pr...
PRESS FARELL 150 TN FOR WOOL ... THIS PRESS MAKE SPECIAL MESURES BALES FOR EXPORT IN FCL... BALE MESURES 1170 X 720 X 1150MM WEIGHT BETWEEN 300/350 KG EACH IN CLEAN WOOL DEPENDS ON KIND OF WOL , HIGH PRODUCTION 900/1000 KG HOUR, WITH HIS OWN STORAGE FILTRED MATERIAL, FILTRET ACROSS A CONDENSER SPECIAL WHO DEDUST THE MATERIAL BEFORE GOES TO STAORAGE PRESS PLACE, AND WITH TRUTZSCHSLER AUTOMATIC FILTER FOR THE AIR ABSORBED BY THE CONDENSER.... REALLY GOOD AUTOMATIC INSTALLATION.
Bpoh98xw
pressure 200 t
stroke 400 mm
tank capacity 51 l
pressing speed 1,84 mm/sec
column daylight 1300 mm
Crplgbr
feed speeds 5,73 mm/sec
return speed 7,08 mm/sec
Pressure power 243 bar
engine output 3,0 kW
speeds: 2
325 mm
range L-W-H 1925 x 975 x 2270 mm
weight of the machine ca. 1690 kg
Dimensions:
2750x1700mm
L3bigh2g
T-nut plate: 2440x1520x230mm
frame hydraulic press WEGOMA
Workspace: width 3600 mm height 2500 mm
Dgjnj29
the amount of lateral hydraulic cylinders 3
pieces top two pieces beam mechanically Move
Mechanical compression setting
more photos an questions
Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014.
Lydy8clb
In this offer you acquire a used colour production system "Xerox 700 Digital Colour Press ".
Item for sale:
1 x Xerox 700 Digital Colour Press with the following equipment:
-incl. Fiery E10-02
Meter readings:
Total: Approx. 5,683,450 pages
Colour: Approx. 3,679,705 pages
Black: Approx. 2,003,745 pages
Consumables:
Nvvkl
Drum Unit BK: 85%
Drum Unit C: 99
Drum Unit M: 71%
Drum Unit Y: 71%
Condition:
This is a used unit and may show signs of use (minor scratches or yell...
Eccentric press Make V & O Press Type FO 43 built 1980
Serial number 25ST-593 Pressing force approx. 25 tons
Bkjhd8j3zf
50 mm
3ojke8o
roll diameter 148 mm
revolutions per minute 13,6/27,2 U/min
total power requirement 1/1,4 kW
weight of the machine ca. 420 kg
dimensions of the machine ca. 800x920x1450 mm
Laenge: About 2430 mm
Width: About 1520 mm
Hpxmute
Heithrange: About 540 mm
