Used Wood Press for sale (18,495)

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives Hedpfx Aaju R Sxxj Ejnp - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: used, Year of construction: 1995, Technical details: punching pressure: 25 (250kN) t pass through width: 1800 (1660 nutzbar) mm Hnjdpfx Aaou Szfue Eep daylight between the columns: max./min.: 155 / 25 mm stroke: Stanzhub: 130 mm total power requirement: 5,0 kW weight of the machine ca.: 2,0 t Dimensions (LxWxH): 2,3 x 1,0 x 2,2 m Hydraulic trolley beam punch hydrl. pressure 250 bar Punching table area = 1830 x 500 mm Punching trolley/plate = 500 x 500 mm; travel speed = 800 mm/sec.; punching stroke = 63 mm/s, forward/return 125/125 mm/sec. Operation via control panel and pressure switch/control lever Equipment: 2x feed rollersØ 120 x 1630mm pneumatic close/open *

Year of construction: 2018, condition: excellent (used), From 2018, 15 kW, with hopper and container PM 32-E (32 m3) and tipping device Hjdpfxsyti Ipj Aa Eenp

Condition: excellent (used), Year of construction: 1995, Rotary / carousel wood gluing press HESS, 6 meters Year of manufacture: 1995 The press is operational and in good technical condition. Press infeed • Glue application machine with 2 rollers Hnodpfxsy Rzk Sj Aa Eep Technical data of the HESS gluing rotor • 4 working areas, each 6,200 x 1,000 x 150 mm • 4 pressing sections • 8 sliding pressure beams • 2 pneumatic pressure cylinders per each pressure beam • 21 hydraulic rams from above • Pressure force per cylinder: 35,000 N / 3,500 kg • Maximum total pressure at 120 bar: max. 73.5 tons per pressing surface Machine dimensions • Total length: rotor 11,100 mm • Depth: 3,050 mm • Height: 3,350 mm • Weight: 13,500 kg

Year of construction: 2009, condition: excellent (used), I sell the press for glulam glued massive wood DRESOMET 4N, year 2009. Hsdpfx Aonxpabsa Eonp Material size 2800 X 800 x 60mm 4 working areas, manual rotation. 9 pcs pneumatic cross pressures per 1 area 9 pcs pneumatic pressures per 1 area Self weight 1300kg. Very good condition. Available immediately.

Year of construction: 2010, condition: excellent (used), I sell the complete line for production of solid wood panels. Product size max. 2600X2100mm Complete line consists of: 6-spindle Weinig Unimat fourside moulder Cross chain conveyor Hnjdeg D Uuqjpfx Aa Ejp Automatic Glue spreading unit with cycle programming Entry table before the press Italpresse GB/13 Super Press size 2600mm (Parallel dimension / element length) x 2100mm (Cross dimension / Working width) Output table with rollers and cross chain outfeed conveyor Available as a complete line or sellable also separately. Because of that, the price is on agreement. Available immediately. Possible to test. Suitable also for another jobs. Products like parquettes, floor inputs, etc.

Condition: used, Year of construction: 1998, Multi-level gluing press Used, good condition, little used Machine will be cleaned, partially overhauled Gas pressure dampers renewed Manufacturer: Beck Model: Kontra 8D Year of construction: 1998 Machine no. 405 CE type-tested Multi-level press with 5 levels Hold-down device per level: 2 with handwheel Counterbearing: 3 pcs per level – pendulum bearing for angled gluing Hjdpey H N Tyjfx Aa Eonp Press beam pneumatically operated Working length approx. 1500 mm Working height/depth: 1050 mm Max. material thickness approx. 60 mm Mobile Original price approx. 14,000 EUR Space requirement approx. 1700 x 1500 x 1600 mm Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery as-is, as inspected Without warranty or guarantee

Condition: excellent (used), Year of construction: 2006, I sell the complete line for production of solid wood panels. Manufacturer: KALLESOE MACHINERY AS Modell: LHF6114 + KL30 Maximum possible input length: 1800mm Press width maximum 525mm (useful between appr. 480-520mm) Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 135mm Glue: Danafix 446 Maximum possible output length: 1800 mm - 6000 mm Hjdoyw Aicepfx Aa Esnp Available immediately. Possible to test.

Condition: excellent (used), Year of construction: 2010, I sell the complete line for production of solid wood panels. Hsdpfjw Anc Esx Aa Eonp Manufacturer: KALLESOE MACHINERY AS Modell: LHF6114 + KL30 + STACKER Maximum possible input length: 1800mm Press width maximum 525mm (useful between appr. 480-520mm) Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 155mm Glue: Danafix 446 Maximum possible output length: 1800 mm - 6000 mm Available immediately. Possible to test.

Condition: excellent (used), Year of construction: 2012, I sell the complete line for production of solid wood panels. Manufacturer: KALLESOE MACHINERY AS Modell: LHF6114 + KL30 Hsdpfxevw Eh Nj Aa Ejnp Maximum possible input length: 1800mm Press width maximum 525mm (useful between appr. 480-520mm) Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 135mm Glue: Danafix 446 Maximum possible output length: 1800 mm - 6000 mm Available immediately. Possible to test.

Condition: excellent (used), Year of construction: 1990, I sell the press for glued massive solid wood panels Maweg Hildebrand Euro-Auto Material size 2800X2000 x 120mm 2pcs. vertical pistons hydraulic. Hnsdpfx Ajg Dvu Tea Eop 2pcs. horizontal pistons hydraulic. Very good condition. Avialable immediately.

Condition: like new (used), Year of construction: 2020, total length: 6,020 mm, Pneumatic automatic press for longitudinal wood gluing, 6 meters, for micro-joints, after complete overhaul Hnjdpfx Aasy E I D Io Eep

Condition: excellent (used), Year of construction: 2008, I sell the press for glulam glued massive wood LISY DVORAK TH6, year 2008. Material size 2600 X 1050 x 50mm 6 working areas, manual rotation. 6 pcs hydraulic cross pressures per 1 area / pomp 1,1 KW 6 pcs manual pressures per 1 area Self weight 1350kg. Very good condition. Available immediately. Hedoh Txl Iopfx Aa Eonp

Condition: excellent (used), Year of construction: 2008, I sell the press for glulam glued massive wood LISY DVORAK TH6, year 2008. Material size 3000 X 1250 x 50mm 6 working areas, manual rotation. 6 pcs hydraulic cross pressures per 1 area / pomp 1,1 KW 6 pcs manual pressures per 1 area Self weight 1200kg. Hnsdpfjkd Drhjx Aa Eop Glue spreading machine LISY DVORAK NL200 included in price. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Press type JJZ-CP is designed for the production of plywood, doors, MDF board. Feeding and receiving of glued elements from the press is done automatically by means of driven rollers. The press can cooperate with glue feeders. Technical data: -max.pressure 500T/ adjustable/ -max. batch height 1300mm -max. charge size 1300x2500 -press dimension 3600x1370x4500 mm -Press position ~500mm below floor level -feeding table 2000x1960 mm Hnjdpfx Aajtutwve Eep -receiving table 2350x2500 mm -max.power 13,2 kW -CE mark

Condition: excellent (used), Press for gluing wood with a feeder STETON PLA 2500x1300 - Italian production - CE and DTR - year of production 1998 TECHNICAL PARAMETERS: shelf dimensions 2500 x 1300 mm six hydraulic cylinders with a diameter of 85 mm automatic glue applicator with pneumatic feed a four-section feeding table with the possibility of setting each section individually the ability to set the number of elements fed for each section element dimension min. 300x30x25 (LxWxT) mm element dimension max. 2500x160x40 (LxWxT) mm shelf pressure 260 bar max pressure of side pressure 120 bar bumper max pressure 200 bar Hedjh Tm A Ejpfx Aa Eenp total power 11 kW temperature max 120 " roller feed speed from 5-60 m / min feeder speed 0 -40 m / min adjustable speeds on the inverter roller receiving table 1400 x 2500 mm seven side hydraulic cylinders 1800 mm feeding conveyor electric heating of shelves cross feeding table 2500 x 1400 mm total length 588 cm total width 497 cm Transport dimensions 1000x 230x 220 cm weight 11 t

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request Hodpfju Axfcox Aa Eenp -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: new, Year of construction: 2024, functionality: fully functional, The SLV and SLH hydraulic presses are designed for the thick-layer gluing of wood (window profiles, glued beams, etc.), with natural drying of the glued joints. The work surface is equipped with hydraulic compression units and hydraulic trolleys for aligning the elements. Adjustment is possible for each segment individually or collectively. Each cylinder can be closed independently. The surfaces that come into contact with the adhesive are protected with stainless steel tape. The press is designed in such a way that the segments can be upgraded later to the desired working length. Hodpfjgf A S Nox Aa Eenp

Condition: good (used), Year of construction: 1994, Max pressure space : L 1900 x H 1800 mm Incl. OBEL-P High Frequenz unit. Chair seat bending : 3-4 min. pr cycle. Hnsdpfszi Hpuex Aa Ejp Still connected to power. Can be examined in working condition. 1). 3D pressure can meet different shapes of plywood bending requirement and help customer develop more designs. 2). HF heating is dielectric heating. It heats products by friction of water melocules, fast, uniformly and effective 3). HF power is selective heating. It focus on glue heating but not heat the wood material, saving energy. 4). High quality. After pressing, plywood shape is steady and hard to change. 5). HF bending press can work with metal mold, plywood mold as well as MDF mold. There are more choice for end user. Customer can make mold themselves easily. 6). HF power needs only electricity, clean and dust free.

Condition: ready for operation (used), Veneer press with 30 floors Size of press plates 3000 x 1650 mm Hodpsyh A E Ujfx Aa Esnp Hydraulically operated. Hot water for heating In-feed system and out-feed system included

Condition: ready for operation (used), Sennerskov Hydraulic Plywood Press for Sale Heavy-Duty Oil-Heated Hydraulic Press – Fully Operational A robust and well-maintained Sennerskov hydraulic plywood press is offered for sale due to changes in production requirements. Originally manufactured around 1970, the press was extensively upgraded with a modern PLC control system in 2014 and has since been used successfully in plywood manufacturing. The machine is fully operational and can be inspected while running in production. Technical Specifications * Manufacturer: Sennerskov * Year of manufacture: Approx. 1970 * PLC control system installed: 2014 * Press format: 3,650 × 2,150 mm * Daylight opening: 270 mm * Hydraulic cylinders: 20 pcs. * Cylinder diameter: 110 mm * Maximum hydraulic pressure: 230 bar * Heating system: Thermal oil heated * Weight: Approx. 40 tonnes * Included equipment: * Mylar sheets * Feeding table Description This is an exceptionally heavy-duty industrial press designed for continuous plywood and laminated panel production. The machine features a highly rigid construction, ensuring uniform pressure distribution across the entire pressing surface. The press has been used for plywood production and is suitable for a wide range of applications, including: * Plywood manufacturing * Veneered panels * Laminated wood products * Furniture components * Specialty composite panels The press was modernized with a PLC control system in 2014, providing reliable and user-friendly operation compared to older relay-based systems. Condition * Fully operational * Can be inspected under power and in production * Press plates are in excellent condition * Press plates are flat and free from known damage or deformation * Well maintained throughout its service life Hnodozd Shrepfx Aa Esp

Condition: used, - 100 x 72 x 12 mm, - Available: 5, Hnjdpfx Aelkcguoa Eep Price per unit: €25.00 + VAT.

Condition: used, - 60 x 72 x 12 mm, - Available: 2, Hnjdpfx Ajlkcgxea Eep Price per piece: €20.00 + VAT.

Year of construction: 2016, condition: reconditioned (used), press aggregate with 2 hydraulic press arms around the glued board slats in the mechanical press offset free to press. (instead of using a big hammer or big weights on the crane hook) Hedpfxed Dcmqs Aa Ejnp

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, cutting length (max.): 3,600 mm, cutting width (max.): 400 mm, year of last overhaul: 2024, For sale is a complete stationary sawmill, including a dust extraction system and a log turner infeed! The new price for the sawing line alone was over €285,000! TECHNICAL DETAILS Cutting length (max.): 3,600 mm Cutting width (max.): 400 mm MACHINE DETAILS Type of input current: Three-phase Year of last overhaul: 2024 EQUIPMENT Woodmizer SLP line Hnsdpfx Aaszki Txs Eop Dust extraction system Log turner infeed