Used carcase presses for sale (34)

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: Flexible, pneumatic press with very short setup times The press consists of a sturdy press frame, a smoothly movable press carriage, and horizontal and vertical press jaws. All controls are conveniently accessible. The MPH 100 achieves a clamping effect of the press carriage when pressing – similar to a screw clamp. - Equipped with 3 vertical press jaws - Equipped with 2 horizontal press jaws - Cabinet length: 380 - 2500 mm - Cabinet depth: max. 600 mm - Cabinet height: 350 - 1200 mm - Pressing force: 3.6 kN / press jaw - Working height: 600 mm - Weight: 1.1 t - Operating pressure: 6 bar Crjdpey Ih Ryofx Akceb Availability: short-term Storage location: 63934 Röllbach

Condition: excellent (used), Year of construction: 1991, machine/vehicle number: 211/91/1, functionality: fully functional, input current: 16 A, input frequency: 50 Hz, table width: 750 mm, table length: 2,700 mm, total length: 3,650 mm, total width: 850 mm, total height: 2,300 mm, overall weight: 2,200 kg, lifting height: 1,350 mm, working width: 750 mm, workpiece length (max.): 2,500 mm, workpiece width (max.): 750 mm, workpiece height (max.): 1,300 mm, height adjustment type: electric, space requirement height: 2,300 mm, space requirement length: 3,650 mm, space requirement width: 950 mm, working length: 2,500 mm, - Lamella - carcass press - Working area: - Width from 150 - 2,500 mm, height from 150 - 1,300 mm; depth 750 mm; - 2,200 daN (kg) - The pressing force is adjustable to 85% + 70%. - Very robust machine Cedpfxjyx Habo Akcsrb

Condition: used, Year of construction: 1992, Dimensions: 5700 x 1300 x 2400 mm Csdpjvvkl Dsfx Akcsrb Storage location: Nattheim

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Lamella – Carcase Press with Rapid Traverse Technical specifications: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm, depth 700 mm; - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with field-proven tolerance compensation for tightly pressed carcase joints - Counter-pressure surfaces are continuous, coated support plates, 40 mm thick - The pressing force of the pressing beams is infinitely variable via two potentiometers and set electronically via frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressing beams: min. 500 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Pressing force for vertical pressing beams: min. 300 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Including option: Codpfxey Egz Se Akcorb Rapid traverse speed for quick positioning of the pressing beams, controlled by automatic workpiece detection with sensors in the pressing beams; pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. Sensors can be deactivated for pressing special parts. - Jog mode for precise positioning of both pressing beams, e.g., for low pressing forces, drawers, and carcases at 45 degrees. Easy operation via six separate push buttons, freely adjustable pressing time preselection with automatic opening feature, loading height 300 mm. The machine is available from our showroom and can be delivered immediately. Location: ex-stock 54634 Bitburg - available immediately -

Condition: excellent (used), Through-feed System (of the furniture cabinets) Electro-mechanical pressing system Self-centering system Motorized conveyoring and carcasse-assembling Carpet (through-feed the Clamp) mm 4500 Adjustable feeding speed (m/min ) 10-40 Codpfoyzh I Ssx Akcjrb Total lenght of the Press Clamp (mm) 4400 approx Electronic programmer PLC «OMRON» Total installed power (Kw) 8,8 approx With in-feed conveyor (motorized belt) With out-feed conveyor (motorized belt) SIZE of FURNITURE CABINETS: Minimum lenght of the furniture cabinet (mm) 250 Maximum lenght of the furniture cabinet (mm) 2500 Minimum depth (Width) of the furniture cabinet (mm) 250 Maximum depth (Width) of the furniture cabinet (mm) 700 Minimun height of the furniture cabinet (mm) 250 Maximum height of the furniture cabinet (mm) 1200

Condition: good (used), Code: 0278 Brand: COMIL BIESSE Model: COSMO Self-adjusting clamp press for furniture, furnishings, kitchens, bathroom furniture and various Working length max mm 2500 Working height mm 1200 Codpfx Aksyyzvgjcsrb Working width mm 700 Positioning speed 3,5 mt/min Total power Kw 3,7 Overall dimensions: mm 3760 x 920 x 2280 h Weight kg 2200

Condition: excellent (used), Hess Corpus Press Type: Export, Pneumatic Manufacturer: Hess Type: Export Maximum workpiece size: 2,500 x 1,500 mm Press force: 1,400 kp pressing capacity per pressure unit at 15 bar Codpsxgvwpofx Akcsrb Vertical cylinders: 2 + 2 pressure cylinders Horizontal cylinders: 2 + 2 pressure cylinders Dimensions: 3,900 mm x 2,500 mm x 600 mm Weight: 1,060 kg Hess Corpus Press Export, pneumatic 2 vertical pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar 2 horizontal pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar; the upper unit is easily adjustable thanks to weight compensation Pressing operation is controlled via 2 rotary slide valves with positions Press – Stop – Release Maintenance unit consisting of pressure regulator (0–15 bar), pressure gauge, and oil mist lubricator Anodized measuring scales, detachable feet Location: Ex works customer site - Immediately available -

Condition: used, Year of construction: 1989, Working dimensions 3000 x 1250 x 650 mm Cjdpfxjxu Egvo Akcorb Cylinder stroke 110 mm Machine dimensions 3240 x 2120 x 770 mm Weight approx. 900 kg

Condition: excellent (used), functionality: fully functional, planing width: 630 mm, rotational speed (max.): 5,500 rpm, overall weight: 1,100 kg, working width: 630 mm, height adjustment type: mechanical, planing height: 200 mm, Thickness planer Dornburg, model DD 63. Robust thickness planer (cast iron), table length approx. 1050 mm. Planing width approx. 630 mm, maximum clearance height 200 mm. Cutterhead equipped with 4 strip knives. Motor 5.5 kW, speed 5500 rpm. Feed rate 18 m/min. Dimensions approx. 1100 x 1300 x 1600 mm (LxWxH). Weight approx. 1100 kg. Cjdpfswtqzrox Akcjrb

Condition: used, length 2.300 mm Csdpfx Akjt H Tuxocerb width 800 mm height 2.700 mm dimension of workpiece max. 1.300 x 700 x 1.450 mm Pneumatic body press or gluing press for pressing furniture bodies or similar items.

Condition: excellent (used), Year of construction: 1997, Clamping machine Italpresse model SP 30-8 Codpfx Aohwwnrokcsrb year 1997 S/N 978612997 working lenght approx. 3000mm working width 600mm working height min-max 450 - 1250mm 12 pcs supports 8 pcs pneumatic pressure cylinder Dimensions L x W x H = 3,5m x 0,8m x 2,24 m 1150 Kg technical information under subject of correction

Condition: excellent (used), Year of construction: 1998, I sell the corpus press for furniture boxes assembly RAMARCH PN31, year 1998. Material size 2500 x 1300 x 600mm Crodpsh Iahgefx Akcjb Electropneumatic operation. Producer: RAMARCH, Spain. (nowadays DYNMA) Very good condition. Avialable immediately.

Condition: excellent (used), Year of construction: 2002, I sell the corpus press for furniture boxes assembly RAMARCH PN31, year 2002. Cjdpoh Iahcsfx Akcjrb Material size 2500 x 1300 x 600mm Electropneumatic operation. Producer: RAMARCH, Spain. (nowadays DYNMA) Very good condition. Avialable immediately.

Condition: good (used), ZIM Hülsta cabinet press NOW Easy Make: ZIM Hülsta-Werke Type: NOW Easy Crsdpfxjvdbv Aj Akcjb Ser. no.: 380125028 Carcase max. 260 x 1100 mm 2 supports at the bottom, movable 2 press bars at top, movable Beckoff control panel Roller conveyor 4500 x 600 mm Roller width: 500 mm Overall dimensions: W x D x H 3300 x 1800 x 3600 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Year of construction: 1995, machine/vehicle number: 0243 / 25634, pressing force: 120 t, total length: 100,000 mm, total width: 1,000 mm, total height: 2,600 mm, Ocmac automatic throughfeed carcass press KOPR CC-EL Manufacturer OCMAC s.p.a. Italy ( acimall) S/N 0243 / 25634 year of construction 1995 Hydraulic self-adjusting electronic carcase press for the assembly of furniture. Automatic feeding of the workpieces Technical data: Max. usable mass: Cjdpoqai H Tsfx Akcsrb Length 2300mm width 600mm Height 1500mm Min usable dimensions: Length 500mm Width 300mm Height 200mm Feed rate of the conveyor belt: 2,4-12M/min Closing time of the press 20-40 seconds Installed power 11.5 kW Max pressure: 120 bar Voltage: 380 V , 50 hz Net weight 4500 kg

Condition: used, Year of construction: 1993, used, in excellent condition Brand: Hess Model: Express Year of manufacture: 1993 Machine no.: 100914/28 Cylinders per press element: 2 - 110 mm stroke Codpfxexuv N Uj Akcjrb Number of press elements horizontal: 3 Number of press elements vertical: 3 Working width: 2500 mm Working height: 1350 mm Press depth: 600 mm Pneumatic Height adjustment: electric Space requirement approx. 3600 x 800 x 2450 mm Weight approx. 1200 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current condition as inspected, without warranty or guarantee

Condition: as good as new (ex-display), Year of construction: 2024, Technical data: Slat carcass press from our showroom; Working range: width from 150 - 2.550mm, height from 150 - 1.400mm; depth from 150 - 700mm; Variable pressing force adjustment 300/700/1100/1400/1800/2200 dN(kg) of the lateral pressing beam; Variable pressing force adjustment 500/800/1200/1500/1900/2200 dN(kg) of the upper pressing bar Simple operation via 6 separate push buttons, Freely adjustable pressing time preselection with automatic opening, Charging height 300 mm Csdpfx Aob Eln Djkcerb Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams Codow Sgnkopfx Akcsrb - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Lamella - carcass press with rapid traverse Technical data: Lamella carcass press from our showroom; Working range: width from 150 - 2.500mm , height from 150 - 1.400mm; depth 700mm; - lamella press beam top with 6 elements, lamella press beam side with 5 elements - lamella press beam with practice-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressing bars is infinitely variable electronically controlled by 2 potentiometers and adjusted via frequency converter, therefore the torque transmission is absolutely wear-free. Codpfxoiidm Ns Akcsrb - Pressing force for horizontal press bars min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press bars min. 300 daN (kg) to stepless max. 2200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the press bars, controlled by automatic workpiece recognition with sensors in the press bars, press speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Jog mode for precise positioning of the two pressing beams e.g. for low pressing forces, drawers and carcasses 45 degrees. Simple operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available -

Condition: new, machine/vehicle number: 22069, input voltage: 400 V, input frequency: 50 Hz, total length: 36,600 mm, total width: 9,400 mm, total height: 23,000 mm, overall weight: 2,100 kg, working height: 420 mm, The electro-mechanic case clamp VK011 allows a fast assembly of cabinets without having to make pre-adjustments on the clamp. The strong clamping plates of the VK011 enable all-over clamping of the cases to achieve the highest quality results. A clamping power of up to 2.300 kg can be generated in the press. - Vertical press plate (150 x 50 mm) - Horizontal press plate (150 x 50 mm) - Preselection of pressing time - Max. pressing pressure 1,800 kg (horizontal), 2,300 kg (vertical) - Machine operation via joystick Codpfx Akogqfpfscorb - 2-hand operation Advantages: - High flexibility:Pressing pressure is variably adjustable. Great variety of different cabinet dimensions possible - Maximum output due to positioning speed of up to 54 mm/sec (ECO up to 29 mm/sec) - Intuitive operation via joystick - High safety standards due to CE-conformity e.g. 2-hand-operation, security fence etc. - Sturdy design, linear guides and ball screws lead to the highest precision - Plug & Play

Year of construction: 1995, condition: excellent (used), Blum Metapress ZMM 3320 Boxpress -Metabox year 1995 S/N AA77 Length of runner min 270 mm, max . 650 mm Carcase width min. 300 mm, max 1200 mm Thickness of bottom min.13mm, max. 16 mm Pneumatic press horizontal and vertical for BLUM Metabox Systems Credpefgrgrofx Akcsb Dimensions of machine LxBxH approx. 2000x1200x2000mm in very good condition Weight 700 kg

Condition: excellent (used), Through-feed System (of the furniture cabinets) Mechanical pressing system (with asynchronous motors + inverter) Self-centering system Motorized conveyoring and carcasse-assembling Carpet (through-feed the Clamp) mm 4500 Adjustable feeding speed (m/min ) 10-40 Total lenght of the Press Clamp (mm) 4500 Movable vertical pusher and Movable horizontal pusher Crjdpogz Acaefx Akceb SIZE of FURNITURE CABINETS: Minimum lenght of the furniture cabinet (mm) 250 Maximum lenght of the furniture cabinet (mm) 2500 Minimum depth (Width) of the furniture cabinet (mm) 200 Maximum depth (Width) of the furniture cabinet (mm) 700 Minimun height of the furniture cabinet (mm) 250 Maximum height of the furniture cabinet (mm) 1200 Motorized in-feed carpet to the Press Clamp Length of the carpet in feeding to the Press Clamp (mm) 2500 Electronic programmer PLC (Separate electric and command cabinet) Total installed power (Kw) 7 Stapling Gun E/S 250 (Automatic)

Condition: excellent (used), A) Furniture Carcasse (Case) Continous Press Clamp (with CNC) "LIGMATECH" Mod. MDE 110/28/08 - Motorized conveyoring and carcasse-assembling Carpet (through-feed the Clamp) - Adjustable feeding speed m/min 12-40 - CNC Power Control 22 T - Total installed power Kw 14 - Total length of the machine mm 6220 Machine ables to process furniture cabinets (corpus) with dimensions: - Min/Max Length (Min/Max): mm 250 /2800 - Min/Max Depth - Width (Min/Max): mm 120 /800 Codpfx Ajlkbn Ijkcjrb - Min/Max Height (Min/Max): mm 280 /1320 B) Motorized transport carpet Mod. MTB 200/20/08 (length mm 2000) C) Motorized transport carpet Mod. MTB 200/20/08 (length mm 2000)

Condition: excellent (used), Hydraulic assembly press Italprasse Program/30 for door and window joinery Cedpjwkf Stsfx Akcjrb The Italpresse Program/30 machine is a hydraulic vertical press designed for precise assembly and gluing of wooden elements, such as window and door frames and furniture bodies. Thanks to its design, it allows for precise fitting and permanent connection of components, which is crucial in the production of door and furniture joinery. Technical specifications •Maximum working dimensions: 3000 × 1700 mm •Stroke of vertical cylinders: 800 mm •Stroke of horizontal cylinders: 1200 mm •Adjustable lower beam: can be set in three positions •Hydraulic cylinders: •2 vertical (Ø 100/60 mm) •2 horizontal for setting frames (Ø 50/35 mm) •Power of hydraulic unit: 2.2 kW •Overall dimensions: 3600 × 1000 × 2650 mm •Weight: approx. 1200 kg Application Italpresse Program/30 is ideal for: •Gluing and assembling window and door frames •Assembling furniture bodies •Assembling wooden panels and other construction joinery elements

Condition: used, Year of construction: 2024, New display machine! List price: €32,665,- complete in standard configuration with: Sturdy, torsion-resistant steel frame constructed with welded and bolted assemblies. Louvered top press beam with 6 elements; louvered side press beam with 5 elements. Louvered press beams feature the proven Ganner system tolerance compensation for tightly pressed carcass joints. Counterpressure surfaces (side pressure wall and bottom) are 38 mm thick, coated, continuous support plates. Continuous pressing surface with a height of 95 mm at the lower vertical press beam. Electromotive adjustment of both press beams via precision trapezoidal threaded spindles (with increased pitch and running accuracy) and high-performance running nuts with grease reservoir. Pressing is performed electromechanically via two separate worm gear motors (2 x 0.75 kW). The pressing force of the press beams is continuously adjustable via 2 potentiometers and controlled electronically by frequency converters, ensuring absolutely wear-free force control. Pressing force for the horizontal press beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg). Pressing force for the vertical press beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg). Pressing and adjustment speed of the press beams with fine positioning, selectable via three-position rotary switch: 5 / 10 / 25 mm/second. Very simple operation using 6 separate push buttons; 8 movement sequences selectable via control system. Freely adjustable pressing time preselection with automatic opening from 0–30 min (switchable to seconds or hours). Working height/feed height: 300 mm. Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm. Weight: approx. 1800 kg net. Dimensions (Length x Width x Height): 3.45 m x 0.95 m x 2.30 m. Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A). Additional equipment: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams. Pressing speeds of 5 / 10 / 25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for pressing special components. 1 set of machine feet (working height 500 mm). Csdpfouf Hx Hjx Akcjrb Storage location: