Condition: good (used), Year of construction: 2006, functionality: fully functional, saw blade diameter: 550 mm, overall weight: 500 kg, Pressta Eisele Profilma 501 Circular saw machine for aluminum and plastic profiles – ideal for series production with high volumes and precision requirements. Designed for 550 mm saw blades. The powerful 7.5 kW motor, in combination with the hydropneumatic saw feed (cutting from below), ensures fast and clean cuts. The cutting height is adjustable. Six pneumatic clamps (horizontal and vertical) with individually adjustable clamping pressure guarantee secure hold for delicate profiles. The stationary base frame (working height 980 mm), the manually opening protective cover, and the saw blade housing integrated under the table provide a high level of operational safety. Credpfsz Hzagox Aiisi Minimum quantity lubrication system with a 1-liter lubricant tank including level control. Max. cutting range: – Profile height: up to 140 mm – Profile width: up to 270 mm – Round material: Ø 180 mm Technical data: – Weight: approx. 480 kg – Dimensions (W x D x H): approx. 170 x 148 x 155 (192) cm - Year of manufacture: 2006

Condition: good (used), Year of construction: 2006, functionality: fully functional, overall weight: 4,200 kg, Equipment: CE marking, documentation/manual, Kaltenbach bandsaw KBR 371 NA Chip conveyor Infeed side with roller conveyor, approx. 5 m Programmable material feed Saw band dimensions: 5920 mm x 41 mm Manual and CE marking available Cjdpfe Aavmzjx Aiieri Further technical data can be found in the photo documentation Last used in a metalworking shop, not for mass production.

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL INFORMATION Manufacturer: Eisele Type: LMS III-D Machine number: 3.028 Year of manufacture: 1975 Machine type: Metal circular saw ELECTRICAL DATA Operating voltage: 220–380 V DRIVE Speed: up to 2,800 rpm TOOL Crsds Aduyhopfx Aiiei Grinding wheel diameter: 250 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 700 mm Width: 500 mm Height: 1,000 mm Weight: 150 kg

Condition: like new (used), Year of construction: 2023, operating hours: 4,837 h, functionality: fully functional, total length: 17,400 mm, total width: 1,970 mm, total height: 1,870 mm, cutting range round steel at 90°: 200 mm, type of input current: three-phase, overall weight: 2,300 kg, input voltage: 380 V, cutting range square steel at 90°: 200 mm, length stop: 8,000 mm, Equipment: documentation/manual, We are offering this like-new Jih-I Machinery JIH-NC24L circular saw for non-ferrous metals and aluminum, manufactured in 2023. Model: JIH-NC24L Serial number: N24L022C056 Date of manufacture: 20220826 Voltage: 380 V Frequency: 50 Hz Number of phases: 3 Power: 15 HP 8-meter infeed table 6-meter outfeed table Crjdpfxozzp Epo Aiioi If you have any questions or would like more information, please feel free to send us a message.

Condition: used, Year of construction: 2009, Bandsaw machine used Manufacturer: MEBA Model: 335 DGA Year of manufacture: 2009 Serial No. 7548 Technical data Design: CNC Autocut 45° left Ø 305, 305x335 mm 90° Ø 335, 500x335 mm 45° right Ø 335, 3220x335 mm 30° right Ø 180, 170x335 mm Motor: 3.0 kW Crodpfo Ah Dt Tox Aiioi Saw band: 4400x34x1.1 mm Band speed: 15-150 m/min Smallest diameter: 5 mm Working height: 750 mm including new: Infeed roller conveyor, 6 m long Outfeed roller conveyor, 4 m long

Condition: used, Year of construction: 1990, Semi-automatic cold-cut circular saw Manufacturer: Eisele Model: VMS-III-S-PV Year of manufacture: 1990 Serial No. 2144 Used Technical data: Saw blade diameter: 350 mm max. Codj Ah Dqqjpfx Aiijri Miter cuts: 30-90° Cutting capacity, straight cuts: Pipes: 120 mm diameter Square tubes: 90 mm Solid material: 100 mm Cutting capacity, miter cuts: Flat material: 140x90 mm Pipes: 120 mm diameter Square tubes: 90 mm Solid material: 100 mm Rotational speeds: 34/68 rpm Weight: 450 kg.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total length: 12,000 mm, total width: 7,000 mm, Equipment: CE marking, documentation/manual, Complete tube processing system from 1999, consisting of the following components: Csdpfsz S U Uvex Aiiori 1. Automatic tube feeding system for tubes up to 7,000 mm in length. 2. BEWO ECH-110-M - Tube circular saw for sections with a diameter of 10 - 110 mm and a length of 250 to 3,000 mm. 3. BEWO DB-90 - Tube deburring machine. 4. ROWAMAT RL-3000 - Cleaning machine for tube sections up to 3,000 mm in length. The complete system can be inspected by appointment at ELIT INOX d.o.o. in 32000 Cacak, Serbia.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1424140083, Elumatec sawing machine SAS 142/141 with dust extraction system Year of manufacture: 2008 Cutting accuracy: 0.5-0.6 mm Dust extraction system: Year of manufacture: 2008 For sale only to dealers and commercial businesses. Crsdez Rpgwopfx Aiisi Due to the age and operating hours, no guarantee or warranty is provided.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Mössner REKORD SSF630 – heavy-duty 11 kW version with manual transmission Top-maintained industrial band saw including extensive equipment Mössner REKORD SSF630 in the heavy-duty 11 kW version, equipped with a 2-speed manual transmission. The machine comes from an industrial environment, is fully functional and ready for immediate use. Equipment & Features: 11 kW drive – heavy-duty version Manual transmission Crodpfx Ae Afuqpsiisi Cutting speeds: 27–142 m/min and 410–2200 m/min Roller guide completely including guide rollers Feed table with 4 T-slots Mushroom-head emergency stop button LED work light Extra protective cabin (ideal for series or precision cuts; can be removed for long workpieces) Machine mounted on a steel plate – immediately stable Spare saw blades included Main technical data: Saw band length: 5180 mm Maximum cutting height: 460 mm Maximum cutting width: 605 mm Table size: 740 × 785 mm Table load capacity: 250 kg Operating voltage: 400 V Loading onto a truck is free of charge.

Condition: used, Year of construction: 2011, We are offering this used Wegoma DS 130 BC miter saw, manufactured in 2011, for sale. The machine has been replaced in our facility with a new double miter saw with continuously adjustable swivel angles and has always functioned well up to now. Key specifications: • Type: DS 130 BC • Serial number: 09438 Csdpfx Aoz Ag Eceiiori • Year of manufacture: 09/11 • Swivel angle: 45° (inward) and 90° (left and right saw heads independently) • Saw blades: d 500x4x80mm, Z=126 • Clamps: 2 vertical clamps, 4 horizontal clamps • Current application: Cutting aluminum extrusions (insect screen mesh) • X-axis: both saw heads move outward from the center • Cutting length: Maximum: 3600mm, Minimum: 300mm (with center stop) If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Manufacturer: KASTO Maschinenbau GmbH & Co. KG Model: UNITOP 3.0 Year of manufacture: 2008 Machine number: 5051 Electrical number: 5586500 Connection voltage: 400 V Frequency: 50 Hz Type of current: Three-phase, 3~ Connection power: 32 kW Current rating: 100 A Maximum payload of operator unit: 3,000 kg Maximum payload per cassette: 3,000 kg Usable cassette width: 600 mm Usable cassette height: 255 mm Maximum material length: 6,800 mm Number of storage compartments: 100 CE marking: Present Equipment: Crsde Ahzpvspfx Aiisi * Automatic long material storage system with stacker crane * Multi-level storage structure with 100 storage compartments * Material infeed and outfeed station * Electronic storage control with touchscreen operation * Control cabinets and electrical control system * Protective fencing * Upper maintenance platforms with railings Condition: The system is fully functional. It is in used condition, with an appearance consistent with its age. Comprehensive photos of the storage structure, operating units, and control cabinets are available.

Condition: like new (used), Year of construction: 2025, machine/vehicle number: 5401511001, functionality: fully functional, operating hours: 25 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 540 mm, cutting width (max.): 800 mm, control type: CNC control, roller diameter: 540 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, PEGAS-GONDA 540 HORIZONT X-CNC-M | CNC | MIRROR VERSION | SAVE 44% EXCLUSIVE CNC DEMONSTRATION MACHINE – LEFT-HAND MATERIAL FEED – DIRECTLY FROM THE MANUFACTURER! We are selling a fully automatic two-column bandsaw, PEGAS-GONDA 540 HORIZONT X-CNC-M, directly from our showroom. M = MIRROR (MIRROR VERSION) This special version of the 540 HORIZONT X-CNC features a mirrored material feed: the material is fed from the LEFT instead of the usual right side. The perfect solution for production halls where the spatial conditions do not allow for material feed from the right! The machine offers complete CNC control for angular positioning, material feed, and sawing process. Demonstration machine, not used in regular production. Sale due to the renewal of our showroom equipment. SPECIAL PRICE – 44% SAVING! List price: 105,299 EUR Our price: 59,000 EUR plus VAT. You save 46,299 EUR! TECHNICAL DATA Csdpfx Aio Aa Dmvoisri Model: 540 HORIZONT X-CNC-M (MIRROR) Fully automatic CNC two-column bandsaw Material feed from the LEFT CNC-controlled angle adjustment: ±45° Round cut at 90°: 540 mm Rectangular cut at 90°: 750 × 490 mm Saw band: 6880 × 41 × 1.3 mm Band speed: 15–150 m/min Main motor: 5.5 kW Weight: approx. 3,875 kg SIEMENS SIMATIC S7-1500 PLC SIEMENS TP700 Comfort Touchscreen CNC-controlled material feed Feed stroke: 2,000 mm Multiple feed: up to 19,999 mm Servo-controlled saw feed Automatic cut adjustment (ASR) Up to 100 cut programs 6 MONTHS MANUFACTURER'S WARRANTY Warranty on spare parts and labor. In the event of a recognized warranty claim, the buyer only bears the travel and transportation costs. Service rates: Travel costs: 1 EUR/km (round trip) Travel time: 25 EUR/hour Technician work: 50 EUR/hour (outside the warranty) DELIVERY AND SERVICE Price: 59,000 EUR net, FCA Slavkov u Brna, Czech Republic (Incoterms 2020). Immediately available! We offer transport to the customer, commissioning, and operator training for an additional fee, according to our service rates. ORIGINAL ACCESSORIES A wide range of original accessories are available (see accessory price list). We recommend matching PEGAS-GONDA roller conveyors for the left-hand material feed. We will gladly prepare an offer for a complete sawing station. YOUR ADVANTAGES: Special MIRROR version with left-hand material feed Fully automatic CNC operation Directly from the manufacturer 46,299 EUR price advantage 6 months warranty Original manufacturer service Immediately available Contact us for a viewing or further information! PEGAS-GONDA – directly from the manufacturer.

Condition: used, cutting diameter 470 mm Crsdpfe Ah Idpex Aiisi saw band length 6.060 mm capacity 90 degrees: square 610 x 410 mm capacity 45 degrees: round 475 mm capacity 45 degrees: square 490 x 415 mm capacity 60 degrees: round 330 mm capacity 60 degrees: square 320 x 410 mm diameter min. 10.0 mm turning speed range: 20 - 100 m/min dimensions of saw-band 6060 x 34 x 1.1 mm height of material-table 810 mm total power requirement 5.5 kW weight 2080 kg range L-W-H 3280 x 1760 x 2010 mm Current new price ~ 55.000 euros Special price upon request Features: - Robust semi-automatic electro-hydraulic band saw - Miter cuts from -60° (left) to +60° (right) - Designed for industrial use - Ideally suited for cutting solid material - Extremely stable and robust construction - Cast-iron pulleys with a diameter of 500 mm - Equipped as standard with infinitely variable band speed adjustment - Microswitches control the highest and lowest positions of the saw arm - Includes a driven cleaning brush for optimal cleaning . and maintenance of the saw blade - Fully hydraulic system controls the machine's operating sequences - Cooling system provided at the saw blade guides - Blade guides equipped with adjustable carbide inserts - Machine drive features a low-maintenance, oil-lubricated worm gear - Powered by a robust three-phase motor - Motor equipped with overload protection - Machine frame consists of a highly solid steel construction - Features a solid, precise dual-column guide system - Linear guides on both columns ensure perfect cutting results - Includes cutting height limitation - Vise clamping jaw equipped with a long-stroke cylinder - Operating manual in German (PDF)

Condition: used, Year of construction: 1973, machine/vehicle number: 20591, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine Type: Bandsaw Design: Sturdy cast iron construction Machine Weight: approx. 1.5 t Working Area Roll Diameter: 500 mm Overhang: 1,050 mm Workpiece Height: 400 mm Work Table Table Size: 750 × 800 mm Table Tilt: ±40° Cutting Speed Cutting Speed Stage 1: 15–79 m/min Cutting Speed Stage 2: 67–305 m/min Cutting Speed Stage 3: 207–940 m/min Cutting Speed Stage 4: 2,350 m/min Drive Variator Drive: infinitely adjustable Gear Stages: 4 Electrical Data Operating Voltage: 400 V Total Power Requirement: 5.5 kW Dimensions Space Required: approx. 2.4 × 1.0 × 2.2 m EQUIPMENT Crodpfo Aaz Spsx Aiioi Band Tensioning Device Tiltable Work Table Rear Auxiliary Table Various Saw Band Guides Saw Band Grinding Device Work Light Foot Switch Accessories

Condition: good (used), Year of construction: 2010, Ref. -No.: 10602 Manufacturer: DANOBAT Type: CR 330 Year of construction: 2010 Type of control: Digital Control: Digital Storage location: Halberstadt Country of origin: Germany tape length: 2438 mm capacity: 330 mm Speeds: 14-105 m / min Vice opens: 345 m / min traverse: 500 mm engine: 3 kW Width: 1727 mm Cedo Ahmvbspfx Aiieri Height: 1878 mm Weight: 1750 kg Further information: The machine can be viewed while powered up.

Condition: used, Year of construction: 2008, machine/vehicle number: .080356001, with miter cut, roller feed, and pneumatic clamping. Crjdps Af Nk Nofx Aiiei

Condition: like new (used), Year of construction: 2015, functionality: fully functional, power: 5.5 kW (7.48 HP), type of input current: three-phase, cutting height (max.): 650 mm, cutting width (max.): 1,050 mm, overall weight: 4,300 kg, empty load weight: 4,300 kg, coolant pump power: 120 W, cutting range round steel at 90°: 650 mm, cutting range square steel at 90°: 650 mm, height adjustment type: hydraulic, roll diameter: 650 mm, saw blade length: 8,330 mm, saw drive: 5,500 W, Excellent working conditions Crsdjxwch Nspfx Aiiji

Condition: used, Year of construction: 2018, capacity 90 degrees: round 430 mm capacity 90 degrees: square 340x340 mm Crjdpfj Agpgqjx Aiiji capacity 90 degrees: flat 460x335 mm Cutting area at 45 degrees right: round 320 mm Cutting range at 45 degrees right: square 320x320 mm Cutting range at 45 degrees right: flat 320x320 mm capacity 60 degrees: round 240 mm capacity 60 degrees: square 220x220 mm capacity 60 degrees: flat 210x230 mm min. dia. Ø 6 mm table height 700 mm dimensions of saw-band 5090x34x1,1 mm cutting speed 32/64 m/min total power requirement 3,5 kW weight of the machine ca. 1.050 kg dimensions of the machine ca. 2700x1250x1400 mm

Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 6 h, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 460 mm, cutting width (max.): 600 mm, control type: PLC-controlled, roller diameter: 460 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 1,630 mm, total length: 3,200 mm, total width: 1,140 mm, overall weight: 1,200 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, motor brake, Semi-automatic hydraulic band saw Double-sided miter cuts: ±60° Round cuts at 90°: 460 mm Rectangular cuts at 90°: 600 × 460 mm Round cuts at ±45°: 460 mm Round cuts at ±60°: 320 mm Cedpfx Ae Aa Dtceiijri Saw band: 5380 × 41 × 1.3 mm Band speed: 20–100 m/min Main motor: 4.0 kW Weight: approx. 1,195 kg Power supply: 3 × 400 V MITSUBISHI PLC control with touch display Hydraulic material clamping Hydraulic saw feed Automatic feed monitoring PEGAS BRP Digital angle display Manual material feed MAIN ADVANTAGES Large cutting capacity up to 600 × 460 mm Double-sided miter cuts up to 60° Robust construction for demanding applications Hydraulic cutting cycle Stepless band speed Ideal for large steel profiles and structures 6-MONTH MANUFACTURER'S WARRANTY Warranty on spare parts and labor. In the event of a recognized warranty claim, the buyer bears the travel and transportation costs of the technician. Service rates: Travel costs: 1 EUR/km (round trip) Travel time: 25 EUR/hour Technician work: 50 EUR/hour (outside the warranty) DELIVERY AND SERVICE Price: 16,000 EUR net, FCA Slavkov u Brna, Czech Republic (Incoterms 2020). Immediately available! We offer transport, installation, and operator training for an additional charge, according to our service rates. ORIGINAL ACCESSORIES PEGAS-GONDA original accessories available (see accessory price list). We especially recommend matching roller conveyors for long and heavy workpieces. We will be happy to prepare an offer for a complete sawing station. YOUR ADVANTAGES: Large cutting capacity Double-sided miter cuts ±60° Directly from the manufacturer 9,133 EUR price advantage 6-month warranty Original manufacturer's service Immediately available Contact us for a visit or further information! PEGAS-GONDA – directly from the manufacturer.

Condition: used, Year of construction: 2015, machine/vehicle number: 319 C1000075, cutting length (max.): 6,600 mm, saw blade diameter: 600 mm, For sale is a Schüco double miter saw PDG e-Cut600L, manufactured in 2015. The machine is designed for the precise cutting to length and miter cutting of profiles and features a version with a cutting length of 6,600 mm. With its two saw blades, each with a diameter of 600 mm, it is particularly suitable for professional use in profile and window manufacturing. The Schüco PDG e-Cut600L enables the cutting of profiles to defined lengths and processing with different miter angles. Technical data: • Version: 6.6 m Cjdpsz Spn Rofx Aiieri • Motor: 230 / 400 V / 2 x 2.2 kW • Saw blade speed: 2800 rpm • Tilt angle: 20° (outward), 45° (inward) • Saw blade Ø: 2 x 600 mm • Cutting length (min.): 350 mm; 270 mm; (via software) • Cutting length (max.): 6600 mm

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex works: Hydraulic horizontal band saw automation machine, Jaespa Type W 320 AZ – 6 Year of manufacture 1995 Cutting capacity: 320 mm round / 90 degrees Cutting capacity: 320 x 320 mm rectangular / 90 degrees Band speed, infinitely variable: 15 – 110 m/min Drive power: 4.9 kW Cutting lengths: 5 – 9999 mm Complete as shown in the picture, including all powered roller conveyors Crjdpj Aa Iibefx Aiisi Weight: 2.2 tons Price: EUR 2,750.00 plus VAT, ex works

Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 30 h, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 550 mm, cutting width (max.): 620 mm, control type: CNC control, roller diameter: 550 mm, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 2,600 mm, total length: 3,940 mm, total width: 2,300 mm, overall weight: 7,700 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, PEGAS-GONDA THOR 5 | 2025 | TCT HIGH-PERFORMANCE SAW | 32% SAVING TOP MODEL FROM PEGAS-GONDA – CNC HIGH-PERFORMANCE BAND SAW FOR CARBIDE-TIPPED SAW BLADES! We offer a PEGAS-GONDA THOR 5, model year 2025, directly from our showroom. The THOR 5 belongs to the top class of our production range. It was specifically developed for highly productive sawing of solid materials with carbide-tipped saw blades (TCT technology). The extremely robust construction, the powerful 15 kW drive, and the intelligent cutting control enable high cutting performance, precision, and low vibration. SPECIAL PRICE – 32.3% SAVING! New price: 127,008 EUR Our price: 86,000 EUR plus VAT You save 41,008 EUR! TECHNICAL DATA Model year: 2025 – Demo machine Fully automatic CNC two-column band saw Cutting range, round: 550 mm Cutting range, rectangular: 620 × 550 mm Straight cuts 90° Saw blade: 7680 × 54 × 1.6 mm Band speed: 15–150 m/min Main motor: 15 kW Weight: approx. 7,735 kg SIEMENS SIMATIC S7-1200 PLC SIEMENS TP700 Comfort Touchscreen Servo-controlled saw feed with ball screw drive CNC material feed: 3–750 mm per stroke Multiple feed: up to 19,999 mm Hydraulic material clamping and band tensioning HIGHLIGHTS OF TCT TECHNOLOGY Optimized for carbide-tipped saw blades Highly productive cutting of solid materials Low-vibration, heavy-duty construction with polymer concrete filling Automatic cutting control ASR (ARP/RZP) Automatic cutting path control KKR Automatic material feed and programmable cutting cycles Integrated chip conveyor Ideal for industrial series production 6 MONTHS MANUFACTURER'S WARRANTY Warranty on spare parts and labor. In the event of recognized warranty claims, the buyer only bears the travel and mileage costs of the technician. Service rates: Travel costs: 1 EUR/km (round trip) Travel time: 25 EUR/hour Technician labor: 50 EUR/hour (outside the warranty) DELIVERY AND SERVICE Price: 86,000 EUR net, FCA Slavkov u Brna, Czech Republic (Incoterms 2020). Immediately available! We offer transport, installation, and operator training for an additional fee, according to our service rates. Crsdpfx As Aa Drfsiiji ORIGINAL ACCESSORIES Original PEGAS-GONDA accessories and roller conveyors available. We will gladly prepare an offer for a complete high-performance sawing station. YOUR ADVANTAGES: TCT high-performance technology 15 kW drive for demanding cuts Fully automatic CNC operation Directly from the manufacturer 41,008 EUR price advantage 6 months warranty Immediately available Contact us for more information or to arrange a viewing! PEGAS-GONDA – directly from the manufacturer.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Used BOMAR Ergonomic 290.250 GAC fully automatic bandsaw machine, manufactured in 2012. This professional horizontal bandsaw machine is suitable for the automatic cutting of various metal profiles, tubes, and solid materials. The machine features a fully automatic sawing cycle, a hydraulic saw arm, and a hydraulic material clamp. The cutting length and the number of parts to be cut can be set, making the machine very suitable for series production. The saw arm can be adjusted for miter cuts. Automatic cutting is possible up to 45°, while semi-automatic cutting is possible up to 60° under certain conditions. Specifications: Crsdpfo Afp T Ssx Aiioi Max. cutting diameter: Ø 250 mm Max. cutting capacity 0°: approx. 280 × 230 / 290 × 230 mm Max. square material 0°: 250 × 250 mm Saw blade: 2,910 × 27 × 0.9 mm Sawing speeds: 40 / 80 m/min Motor power: 1.1 / 1.5 kW Connection: 3 × 400 V Min. cutting diameter: Ø 5 mm Hydraulic up and down movement of the saw arm Hydraulic material clamp Dimensions: Length: 1,790 mm Width: 1,810 mm Height: 1,200 mm Weight: approx. 575 kg

Condition: used, Year of construction: 2020, Double-head PROFTEQ SA 22 welding machine, manufactured in 2010, designed for welding PVC profiles used in the production of windows, doors, frames and sashes. The machine is equipped with two welding heads, one fixed and one movable, allowing both right-angle and variable-angle welding operations. The fixed head performs welding at 90°, while the movable head allows variable-angle welding from 45° to 180°, providing greater versatility in window and door manufacturing. The welding cycle is automatic and includes the heating, melting, joining and cooling phases of the profiles. Technical Specifications Manufacturer: PROFTEQ Model: SA 22 Year of manufacture: 2010 Machine type: Double-head welding machine for PVC profiles Number of welding heads: 2 Crsdpfxjz Szgfo Aiiji Fixed head: 90° welding Movable head: Variable-angle welding from 45° to 180° Welding cycle: Automatic Minimum weldable profile height: 35 mm Maximum weldable profile height: 190 mm Maximum weldable profile width: 150 mm Power supply: 380 V Frequency: 50 Hz Installed power: 4 kW Pneumatic pressure: 8 bar Weight: 1,000 kg Overall Dimensions Length: 3,800 mm Depth: 1,100 mm Height: 1,900 mm Features and Equipment Two welding heads for processing PVC profiles. Movable welding head for variable-angle welding operations. Pneumatic profile clamping system. Heating plates for melting the surfaces to be welded. Welding bead limitation system. Dedicated control panels for each welding head. Adjustable welding parameters, including temperature and processing times. Automatic welding cycle

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, type of input current: three-phase, Equipment: CE marking, documentation/manual, FMB PEGASUS VHZ semi-automatic bandsaw Cedpfxs Af Nd Rj Aiiori Year 2017, CE certified Blade rotation via inverter Cutting angle from 0 to 60° to the right Round cutting capacity: 330 mm Square cutting capacity: 330 mm Rectangular cutting capacity: 330 x 510 mm Blade: 4210 x 34 x 1.1 mm Rotation speed: 16 - 120 mm/min Motor power: 0.3 kW Weight: 870 kg