Condition: reconditioned (used), Year of construction: 2007, Functionality: fully functional, cutting length (max.): 4,300 mm, cutting height (max.): 80 mm, cutting width (max.): 4,300 mm, main saw diameter: 350 mm, power: 15 kW (20.39 HP), Machine type: fh4 430 HT220 ERB / MCS-Evolution Cutting length: 4.300 mm Cutting width: 4.300 mm Year of construction: 2007 Cs Iaevw Tgaj R Dkiorb Saw blade projection max .: 95 mm Saw blade diameter max .: 350 mm Main saw motor: 15 kW Scorer aggregate Scorer saw blade diameter max .: 200 mm Automatic cutting length adjustment Scorer aggregate, motor-driven adjustable Package height max .: 80 mm Saw aggregate forward: 5 - 120 m / min Saw aggregate backward: up to 120 m / min Feeder: up to 80 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 2 pcs, dual clamp finger Number of clamps: 5 pcs, single clamp finger Clamp opening: 90 mm Strip aligner before and after the pressure beam Air cushion tables: 3 pc(s). 2100 x 600 mm Rollers at air flotation, 3 pcs This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos)

Condition: like new (used), Year of construction: 2016, cutting length (max.): 3,200 mm, cutting width (max.): 1,486 mm, cutting height (max.): 200 mm, saw blade diameter: 550 mm, table length: 3,200 mm, total length: 3,400 mm, type of motor: three-phase motor, power: 7 kW (9.52 HP), SCM LINVINCIBILE Panel Saw Model: SI5 Max saw diameter: 550mm Screw diameter: 120mm Screw diameter with scriber: 450x120 Saw tilt: 0/46 degrees Max saw cut at 90*: 200 Max saw cut at 46*: 130mm 3 saw speeds: 2500/3500/5000 Rpm Saw motor: 7 kw- electric lifting - lowering / saw tilt Screw motor: 1.3kw- electronic adjustment of the scriber Max cut on the parallel guide: 1600mm Two suction openings: lower 120mm - upper 100mm Cs Ia R Djwgag Dekierb Aluminum wagon: 3200mm- start -stop on the wagon Upper mobile control CompeX left guide with stops Additional guide for angles year: 2016 CE norm

Condition: excellent (used), Year of construction: 2003, Pressure beam for clamping workpieces up to approx. 80 mm thick. Cs Iou Ivynja R Dkiorb Particularly interesting for miter cuts and veneer trimming. For a secure hold of the workpiece on the sliding carriage. For 300cm long sliding table or longer. Maximum clamping length approx. 290cm The pressure beam can be mounted on the newer machines with steel guides, but also on machines with Pertinax guides. The pressure beam is divided into two parts and can be controlled separately. The saw in the photos is of course not for sale. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this vendor".

Condition: used, Functionality: fully functional, rotational speed (min.): 3,200 rpm, rotational speed (max.): 5,000 rpm, power: 6 kW (8.16 HP), Equipment: motor brake, Circular saw for edging with scoring CASOLIN ASTRA Blade diameter 400 mm 3 rotations: 3200 / 4200 / 5000 3000 mm movable table Main motor 5.5 kw Electro brake on the motor Ce Iaswf R I Ne R Dkierb In good working condition, ready for production

Condition: good (used), Year of construction: 2005, Thin cut Lamella band saw, Cj Iewf Rv Hsa R Dkisrb 310mm wide Good condition 80mm bandsaw wide 18.5 kw motor

Condition: new, Net price: €4,900 -Including table extension (folding) -Including parallel stop -Including crosscut stop The ZBV 500-S is a height- and angle-adjustable construction site table saw with a 500 mm saw blade. The ZBV 500-S also enables bevel cuts with high cutting heights on the construction site. This makes it ideal for processing the increasingly popular insulation material in conjunction with the AVOLA special HM/A/PH circular saw blade (see above). Motor power P1/P2*: 6.4 / 5.0 kW Power supply: 40 V Co Ijwf Nd Nja R Dkierb Frequency: 50 Hz Device plug: 532CEE Saw blade diameter/bore: 500/30 mm Cutting height 90° / 45°: 0-170 / 0-120 mm Incline adjustment: 90°-45° Table size length/width/height: 1223/850/850 mm Weight: 210 kg

Condition: not inspected (used), Year of construction: 1999, Functionality: unexamined, cutting length (max.): 4,230 mm, cutting height (max.): 76 mm, cutting width (max.): 3,100 mm, main saw diameter: 370 mm, power: 15 kW (20.39 HP), Machine type: FMH 430-310 / MCS-F Cutting length: 4.230 mm Cutting width: 3.100 mm Year of construction: 1999 Saw blade projection max .: 95 mm Saw blade diameter max .: 370 mm Main saw motor: 15 kW Scorer aggregate Scorer saw blade diameter max .: 200 mm Automatic cutting length adjustment Cj Ia Rjq Edcce Dkierb Package height max .: 76 mm Saw aggregate forward: up to 85 m / min Saw aggregate backward: up to 85 m / min Feeder: up to 80 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 9 pcs. grip push clamp Clamp opening: 93 mm Strip aligner before and behind the pressure beam Air cushion tables: 4 pcs. 2100 x 600 mm Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos)

Condition: used, Functionality: fully functional, Roller conveyors for the furniture industry Manufacturer: WTT Fördertechnik GmbH, Type 121 750 complete roller conveyors, each 3 m long Total: 2300 linear meters Roller conveyor length L = 3000 mm Installation length EL = 500 mm Support roller pitch T = 200 mm Roller conveyor height H = 280 mm, adjustable +/- 25 mm Number of FA feet = 1 per linear meter Consist of: 1. Side panels, each 3000 mm long, made of 20/80/40/3 mm profiles, with a 25 mm pitch, holes suitable for a 12 mm diameter axle, stove-enamelled in RAL 6011 green. Cre Ia R Djv I Rl Ujkisb Weight per piece (per side) - 8.15 kg 2. Insertable support rollers Series 4.5.80.1.12.1.5.00 Steel tube - 80 x 2.0 mm wall thickness, Axle - 12 mm spring axle, Bearing - steel insert with reinforced, pressed special ball bearings. Surface of the support rollers: bright steel. Installation length EL = 500 mm Weight - 2.40 kg / piece 3. Screw-on bridge support feet in a sturdy welded construction made of special profile with a crossbeam, height adjustable by +/- 25 mm via an M16 threaded spindle with a screw slot. With floor mounting plates and dowel hole. Stove-enamelled in RAL 3000 red. Weight - 2.5 kg. 23 transverse transfer carriages are also available: Support rollers 4.5.80.1.12.1.2.08.0 made of precision steel tubing Diameter 80 x 2.0 mm wall thickness, axle diameter 12 mm Wheel set consisting of 4 precision ball-bearing flanged rollers, diameter 125 mm Roller conveyor length L = 2,500 mm Track gauge SpW = 2,010 mm Installation length EL = 500 mm Support roller pitch T = 200 mm Roller conveyor height H = 280 mm (Subject to changes and errors in the technical data and subject to prior sale)

Condition: used, Year of construction: 2014, Cutting height max: 133 mm Saw blade diameter max: 400 mm Saw blade height adjustment: electro-motive Saw blade tiltable: electro-motive Main motor power: 5,5 kW Rotation speed steps: 3 Scoring aggregate: Yes Scoring saw height adjustment: Yes Controlled axes: Yes Cro Ia R Dkev R Ek Dsiob Number of controlled axes: 2 Conformity marking: CE mark Total connection: 5,5 kW

Condition: good (used), Functionality: fully functional, cutting height (max.): 120 mm, cutting width (max.): 500 mm, overall weight: 350 kg, Cross cut machine OMEC SP400 Saw diameter 400 mm Crs Ia Rsu U Arzj Dkisb 2 m left & 2 m right roller table 4 kW electrical engine

Condition: new, Year of construction: 2025, Functionality: fully functional, cutting length (max.): 5,000 mm, cutting width (max.): 1,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, type of input current: three-phase, Equipment: lighting, motor brake, rotational speed infinitely variable, scorer, You can get all common Altendorf models, including the F25, F35, WA80, and F45, as well as the Hand Guard machine in all variations. Basic Equipment Crj Ia Rjwf Hdgo Dkisb Electrically driven height and tilt adjustment 0-46° with automatic cutting height correction when tilting Controls at eye level, tiltable Double sliding table, table length 3,000 mm Parallel stop, manually adjustable via scale, including manual fine adjustment Cutting width 1,000 mm, larger available upon request. Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm Maximum sawblade projection: 150 mm Maximum sawblade diameter: 450 mm Drive power: 4 kW (5.5 HP) at 4,000 rpm AKE tool clamping system for the main sawblade Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Continuously variable speed control from 2,000 - 6,000 rpm - Precise speed adjustment to the material increases cutting quality and sawblade service life Extended cutting height for one-sided tilting This option is equipped with a large extraction hood for a maximum sawblade diameter of 550 mm and a maximum sawblade projection of 204 mm for one-sided tilting. In combination with a scoring unit, the maximum saw blade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP). 2-axis scoring unit, single-axis tilting With electric height and lateral adjustment, programmable scoring blade height with quick lowering and quick raising, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofitting only possible on machines prepared for a scoring unit. LED lighting With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked. The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in their respective hard-chrome-plated guide rods. This smooth running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-hollow chamber system. The table surface is precisely planed and anodized. A hard-chrome-plated round rod, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. On/Off Switch on the Sliding Table The on/off switch on the sliding table is always within easy reach. The four buttons turn both the main saw blade and the scoring unit on and off. This saves time and ensures greater safety. Angle and miter stop, cutting to lengths up to 3500 mm This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the tilt angle is continuously adjustable by 49° and is displayed on a scale. Ask us about your dream machine and we will be happy to advise you. We are happy to arrange viewings directly at the machine, in the factory, or with wood dust in the air.

Condition: new, power: 7.5 kW (10.20 HP), Equipment: scorer, Net price: €11,990 -Scoring unit -Saw blade tilt and height adjustment are manual -Cutting height 200mm -Scoring unit with separate drive motor -Main saw blade with belt drive and speeds of 2800/3665/4800 rpm -High weight ensures vibration-free operation -Large outrigger table with material roll, parallel stop with round bar guide -Extendable aluminum rip stop with two folding stops -7.5 kW main motor mounted on a robust cast iron frame -Four-bearing sliding table made of anodized aluminum with high torsional rigidity -Multi-position locking on the sliding table. Comes standard with table extension and table extension made of heavy-duty sheet metal -Large pendulum guard can be easily raised using a gas spring -Saw blade clamping via tool-free Rapid system +Connection Extraction Extraction nozzle diameter: 120 mm Extraction nozzle diameter of saw blade guard: 80 mm Cs Ijwf Ndcja R Dkisrb +Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Power input: 8.3 kW Power output: 7.5 kW +Sliding carriage and table Format sliding carriage length: 3200 mm Format sliding carriage height: 890 mm Table height: 890 mm +Circular saw unit Cutting width with parallel stop: 1450 mm Max. cutting width to the left of the saw blade: 3200 mm Saw blade inclination: 90 – 45° Max. cutting height 90°: 200 mm Max. cutting height 45°: 140 mm Saw blade diameter: 550 mm

Condition: used, Year of construction: 1993, Used, good condition Make: Altendorf Co Ia Rowf Ephj Dkierb Type F45 Year of manufacture: 1993 Machine no. 93-2-88 GS-tested GS-tested for wood dust Heavy-duty motor: 7.5 kW Carriage length: approx. 2800 mm Cutting width: approx. 1250 mm Max. blade diameter: 450 mm Pivoting angle: up to 45° Tabletop extension: approx. 840 mm Height adjustment: hydraulic Pivoting adjustment: hydraulic Miter stop Extraction connection: diameter 120 mm / 80 mm Space requirement: approx. 2800 mm x 1900 mm x 1400 mm Total connected load: approx. 7.5 kW Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 99950384, saw blade diameter: 300 mm, cutting length (max.): 4,300 mm, cutting depth: 80 mm, total height: 2,900 mm, total length: 6,400 mm, total width: 1,600 mm, input frequency: 50 Hz, saw blade bore: 30 mm, overall weight: 1,065 kg, power: 5.52 kW (7.51 HP), Further technical data: Motor voltage: 3x 400V (50Hz) Vertical cutting height: 2100 mm Ce Ievn Nl Tsa R Dkisrb Extraction nozzle: 100 mm

Condition: new, Catalogue number H0548 - new machine, in stock - CE certificate - cutting length 3200mm - cutting width 1150mm - cutting height 90°/45° - 80/55mm - max. blade diameter 305mm - blade adjustable up/down and at an angle of 45 degrees - scoring blade diameter 120 x 20 mm - main saw speed 4500,5500 rpm - scoring blade speed 8000 rpm - 5.5 kW / 400 V motor - scoring blade motor 1.1 kW kW - trolley guided on steel bars Overall dimensions: - length 3220mm - width 3150mm Cj Ia Rsdpdcvo Dkierb - height 900 mm - weight 700kg - mechanical height adjustment - mechanical tilt adjustment - table extension - table widening - angle cutting fence - main blade and scoring blade included Net price: PLN 20310 Net price: EUR 4950 Net price calculated according to the exchange rate 4.1 PLN/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: new, Net price: €3,990 Roll diameter D = 640 mm Saw blade length 4780 mm Work table 870 x 620 mm Max. cutting height 400 mm Max. cutting width 620 mm Saw table inclination 0 to 15° Motor 2.2 kW / 400 volts Crs Iaewf Nb Ie R Dkieb Weight approx. 320 kg

Condition: new, - Electric motor height and swivel adjustment 0 - 46° for the main saw blade - Digital swivel angle display - Saw blade projection max. 150 mm, saw blade diameter max. 450 mm - Double roller carriage, carriage length 3000 mm including stepless upper carriage lock - Parallel stop manual adjustment, adjustable via measuring scale, including fine adjustment, cutting width 1000 mm - Angle stop with fixed 90° position, manually adjustable via measuring scale up to 3200 mm - Drive motor 4 kW (5.5 HP) with 1 speed 4000 rpm - Tool clamping system AKE for the main saw blade Item no. M19308 - including surcharge for motor 5.5 kW (7.5 HP), 3 speeds Cre Isvyurisa R Dkiob

Condition: excellent (used), Catalog number 7280 TECHNICAL DATA - track width 340mm - shaft width 400mm Ce Ia R Derwl Egskiorb - max. disc diameter 350mm - disc hole diameter 80mm - max. cutting height 120mm - table top width with clearance 700mm - table top length 1720mm from above: - pawls - metal sliding pressure shaft - pawls - metal sliding pressure shaft - shaft with saws - metal sliding, pressure shaft 2pcs from below: - guide bar - metal sliding roller - pawls - caterpillar - electric body lifting 0.55kW - central lubrication - smooth feed speed regulation 1.5kW - main engine 37kW - diameter of the exhaust pipe 200mm - total dimensions length/width/height 1800x1670x1780mm - weight about 2500kg - German production - used multi-saw, very good condition Original photos Net price: PLN 86,900 Net price: EUR 20,450 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: good (used), Bäuerle PKS mobile pendulum circular saw with a braked 5.5 kW motor. Net price: €4,200 - Cutting height 125 mm Ce Ia R Dkowf I I Tjisrb - Rewound motor - 5.5 kW (braked) - Pivoting - On a mobile base You will receive an invoice with VAT shown. Shipping via freight forwarder is possible. Price is ex-works, Haldensleben.

Condition: new, - NEW -DESCRIPTION- Particularly smooth and precise running thanks to a torsion-free machine housing and a solid base made of sheet steel- Cast iron saw table with precisely ground and polished surface- Convenient laser device for cutting line marking- Quick saw blade tensioning via eccentric lever on the rear of the machine- Two speeds as standard- Precise 3-roller saw blade guides, as standard at the top and bottom- Quick cutting height adjustment via rotary knob and toothed rack with millimeter scale- Smooth-running aluminum parallel fence with quick eccentric clamping and magnifying glass- Angle fence as standard, adjustable by 60° on both sides- Safety switch for automatic switch-off when the door is openedTECHNICAL DATADimensions and weights- Length (product) approx.1020mm- Width/depth (product) approx.850mm- Height (product) approx.1982mmSuction connection- Suction nozzle diameter2 x 120mmWork table(s)- Work table length 535mm- Work table width 535mm- Work table height 945mm- Work table length max.685mm- Worktable extension length 535mm- Worktable extension width 150mm- Worktable inclination-10 - 45°- Explanation of worktable inclinationFor safety reasons, a holding device/stop must be fitted from 20° to prevent the wood from slipping!Electrical data- Supply voltage 400V- Mains frequency 50Hz- Output power 2.25kWCutting ranges- Cutting height max. 90°270mm- Cutting width max. with stop 474mm- Cutting width max. without stop 514mmSaw blade- Saw blade speed(s) 850 / 430m/min- Flywheel diameter 530mm- Saw blade length 3865mm- Saw blade length 3865mm- Saw blade length max.3872mm- Saw blade guidePrecision guide top and bottomSCOPE OF SUPPLY- Angle stop ±60°- Laser device for cutting line markingItem number: 5155303 Cre Iajvxr Nvo R Dkieb

Condition: new, CATALOGUE NUMBER RE022 – new machine, in stock – DTR + CE documentation – cutting width at the guide 1300mm – main engine 6kW TECHNICAL DATA - saw blade tilt 0-46˚ - main engine power 6kW - cutting length on the carriage 3000mm - main spindle speed 3500/4500rpm - spindle diameter 30mm - main blade diameter 300-400mm - max. scoring diameter 125mm - scoring engine power 0.75kW - scoring speed 8500rpm - spindle diameter 20mm - cutting width at the guide (standard 1050mm, option 1300mm) 1300mm - sawing width using bumpers on the auxiliary table 215-3200mm - cutting height for 300mm 90°/45° 90/60mm - cutting height for 350mm 90°/45° 5-115 / 3.5-80mm - cutting height for 400mm 90°/45° 25-140 / 15.5-95mm - diameter of the exhaust port 80mm, 125mm - dimensions length/width/height 3300/3460/1500mm - weight 750kg Optional equipment: - angle ruler - with aluminum strip - additional support table - additional start/stop in the formatting table - electronic cutting width reader on the longitudinal ruler - electronic cutting width reader on the auxiliary table - formatting table 3200mm, 3900mm, 2500mm Net price: PLN 41,550 Net price: EUR 9,890 Net price calculated according to the exchange rate of PLN 4.20/EUR Cs Iaed Sg Hxe R Dkisrb (with larger exchange rate fluctuations, the price may change) The prices given are net prices. Net price given for international transactions, customers from the EU with an EU tax identification number.

Condition: new, Altendorf F25 demonstration/exhibition machine at a special price of €11,250 net. BASIC EQUIPMENT: • Manual height and tilt adjustment 0–46° of the saw blade, with digital display • Double sliding table, carriage length 3,200 mm • Crosscut miter stop, cutting to lengths up to 3,450 mm • Saw blade diameter max. 315 mm, saw blade projection max. 104 mm • Cutting height 100 mm, 70 mm at 45° • Machine height 880 mm Cro Ia R Dkswf Iutsisb OPTIONAL EQUIPMENT: ▶ 5.5 kW (7.5 HP), 2 speeds ▶ DIGIT X parallel stop, 1,000 mm* ▶ Large extraction hood (PSV) ▶ Scoring unit with LED lighting ▶ Front support roller F25 ▶ Template holder F25 You will receive an invoice with VAT. Shipping via freight forwarder is possible. Price is ex warehouse Haldensleben.

Condition: new, Year of construction: 2023, Net price: €5,750 Cs Iaewf Itis R Dkijrb New HEMA Garant 600 ...fully equipped with special upper and lower roller guides, with mechanical height adjustment of the guide rod, pivoting table, vulcanized band saw wheels, motor protection switch, and dust extraction nozzle. Roller diameter, mm: 600 Motor power, kW (HP): 2.2 (3) Cutting speed, m/min: 1,550 Cutting height, mm: 355 Cutting width, mm: 565 Blade length, max. mm: 4,500 Weight, kg: 280 You will receive an invoice with VAT. Price is gross ex Haldensleben warehouse. Shipping by freight forwarder is possible.

Condition: good (used), Year of construction: 2007, Functionality: fully functional, Eumacop ER 600 band saw with APA precision guide. Technical details are shown in the last photo. Co Iowf Iq Ija R Dkisrb You will receive an invoice with VAT. Shipping via freight forwarder is possible. Price is ex-works, Haldensleben.

Condition: used, Year of construction: 1999, Functionality: fully functional, power: 5.5 kW (7.48 HP), Equipment: scorer, Net price: €3,300 Panel saw with various accessories from Robland. -Front support roller -Scoring unit -5.5 kW motor -Saw blade pivots up to 45°* -Large extraction hood Cj Ia Rowf Ip Rj Dkisrb -3200 mm carriage length -1400 mm cutting width -Year of manufacture: 1999 -Side trimming shoe -400 mm saw blade possible (500 mm without scoring unit) -Clamping lever for clamping the workpiece You will receive an invoice with VAT. Shipping via freight forwarder is possible. Price is ex-works in Haldensleben.