Condition: used, Daveba multiple cross-cut saw for simultaneous cutting of long boards into several shorter ones (with variable length) with feeding mechanization and discharge conveyor belt. The exact scope of delivery of the mechanization is to be agreed. The system is still in operation and can be inspected. The dismantling must take place around the end of September 2025. cutting width: max. approx. 5,000 mm Dus Iaovwl Txo Up Thst cutting height: max. approx. 100 mm

Condition: new, Best price Due Iasdnxyds Up Thst 4499 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 700 kg * Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, machine/vehicle number: 10224936, cutting height (max.): 125 mm, overall weight: 1,500 kg, saw blade diameter: 380 mm, cutting width (max.): 750 mm, power of feed motor: 30 W, Paul multi-blade saw with fixed blades is in excellent working condition. Duj Iasv A Ukws Up Thjt Working width - 750mm; Maximum cutting height - 125mm; Compressed air - 6 bar; Blade diameter - 250/380mm; Installed electrical power - 30Kw; It was purchased new in 2010, and since 2016 it has been put into conservation. I only cut softwood lumber with it.

Condition: new, Year of construction: 2025, - Type ZS 200 N Saw blade diameter 520 mm, saw blade mounting hole 50 mm saw blade speed 2.800 rpm 400 Volt / 5 kW (S6/40%) Motor with brake and automat. Star delta motor control cutting width at 90°: 420 mm cutting width at 45° swivelled: 295 mm cutting height at 90°: 200 mm cutting height at 45° tilted: 140 mm Saw can be tilted on one side up to approx. 25° to acute angles and tilted flat to the left up to 30°. Machine weight approx. 250 kg Due Ia Upjbfxxce Thot -stable cast iron construction -precise ball-bearing guide of the tool slide on hardened and ground steel shafts -manual saw feed -quick miter adjustment up to 65 -adjustable fixed stops -lower saw blade guard can be connected to suction unit the machine can be moved with a lift truck - machine can be tilted on both sides from the front via hand crank - HM circular saw blade 520x4,0/2,8x50 mm 60 WZ geb. for wood

Condition: new, Year of construction: 2025, Zero mistakes, zero waste, and higher productivity! We thought SalvaStop_100 as a fundamental component to give your work an edge. Through numerical control, this electronic stop manages the push, stop and positioning of the profiles to be cut, regardless of the material. So you can reduce human errors, avoid waste and decrease labor costs. SalvaStop_100 is integrated with exclusive software that is easy to use thanks to an immediate, easily understandable and complete graphic Dj Ia Up Tjkzhb Ujhout interface. You can have the SalvaStop stop alone or combined with one of our Legend crosscutting saws to improve performance, work in complete safety and minimize human error.

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, motor voltage: 380 V, extraction connection diameter: 120 mm, saw blade bore: 30 mm, cutting depth: 110 mm, main saw diameter: 400 mm, extraction nozzle diameter: 120 mm, length stop: 3,200 mm, working width: 1,100 mm, Equipment: motor brake, Format 4 x motion in excellent condition, always worked on by 1 person Dus Ia Uov Aywpjp Thet

Condition: used, Daveba multiple cross-cut saw for simultaneous cutting of long boards into several shorter ones (with variable length) with feeding mechanization and discharge conveyor belt. The exact scope of delivery of the mechanization is to be agreed. The system is still in operation and can be inspected. The dismantling must take place around the end of September 2025. De Ia Uevwl Trsp Theut cutting width: max. approx. 5,000 mm cutting height: max. approx. 100 mm

Condition: new, Dimension of sliding table- 3800x375mm Gross cut capacity- 3800mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 125 mm Height of cut (45°) - 115mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Main motor - 5,5 Kw Saws lifting, up and down, electrical control. Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 3800x1000x1100mm Dj Ia Uedd Dzuep Theut Weight - 820 Kg (EXW Jonava, Lithuania)

Year of construction: 1978, Condition: good (used), Type - 35/4 Cutting height - up to 320 mm Cutting width - 60 - 360 m Feed - stepless, 7 - 35 m / min Do Ia Upsil H Svo Thsut Feeder

Condition: new, Year of construction: 2024, The SQUALO 522 Multiblade or Double Shaft Multiblade Circular Saw is a technological machine, essential in a modern sawmill to optimize the production of sawn timber. Ideal for the production of strips, squares, sawn timber, profiles, trimmed boards, prisms, tablets, elements for pallets. SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE Double shaft multi-blade: Squalo 525 motor powers from 55 to 132 Kw Description Details Conveyor belt width mm 520/620 Width Conveyor rollers at the entrance mm 510 Width Conveyor rollers at the exit mm 610 Max saw group width mm 500 Max cutting height mm 220 Min. Length of work mm 1000/1200 Max passage width mm 800 Blade shaft diameter mm 80 Duo Ia Up Telz S Rbshjt Max diameter circular blades mm 400 Blade hole diameter mm 100 Blade shaft speed rpm 3.800 Speed of advancement mt/min 3 – 60 Weight 9.500 – 10.500 Kg Overall dimensions mm 2720x2515x2105h

Condition: new, Year of construction: 2025, Functionality: fully functional, saw blade diameter: 600 mm, cutting height (max.): 160 mm, cutting width (max.): 610 mm, power: 0.01 kW (0.01 HP), Extreme robustness and maximum power! Ds Ia Upofcdnle Theut The Legend_600 has a completely painted, thick and reinforced steel structure. The blade with a diameter of 600 mm, the power of 9.2 kW and the rotation speed of 2750 rpm make it the ideal machine for those who work with wood up to a maximum of 150 mm thick and 610 mm wide.

Condition: reconditioned (used), Year of construction: 2002, Functionality: fully functional, saw blade diameter: 400 mm, motor voltage: 380 V, extraction connection diameter: 120 mm, saw blade bore: 30 mm, cutting depth: 110 mm, main saw diameter: 400 mm, extraction nozzle diameter: 120 mm, plate width: 1,100 mm, length stop: 3,200 mm, Format 4 X motion from 2002 in excellent condition, always worked on by 1 person as a side job De Iev Ayp Sja Up Theut

Condition: used, High-performance cutting and ripping machine or double cutting system Philipp for the re-cutting of unedged models. The system measures, cuts and trims models after a block band saw or similar. The exact scope of delivery of the mechanization is to be agreed. The system is still in operation and can be inspected. The dismantling must take place around the end of September 2025. workpiece length: 1,500 – 5,000 mm workpiece width: 200 – 1,000 mm Duj Ia Upevwl Tfo Thst workpiece height: 45 – 160 mm

Condition: new, Dimension of sliding table- 3200x375mm Gross cut capacity- 3200mm Width of cut between saw blade and rip fence - 1250mm Saw blade diameter - 400mm Height of cut (90°) - 125 mm Height of cut (45°) - 115 mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 Kw De Ia Usdd Dzdop Thsut Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 3200x1000x1100mm Weight - 850 Kg (EXW Jonava, Lithuania)

Condition: used, Year of construction: 2017, Osi Plus Numerical Control QUICK OPTI software for cutting pattern optimization directly on the machine Cutting optimization software OPTIPLANNING PROFESSIONAL version Barcode Label Printer - OS-Labelling Electrical cabinet air conditioner Cutting length mm 4400 Cutting width mm 4300 Blade projection 75 mm Manual front panel loading Lateral aligner integrated into the blade carriage No. 1 fixed front bakelite table with air curtain system for unloading the panels (mm 2050 x 850) No. 3 adjustable front bakelite tables with air curtain system for unloading the panels (mm 2050 x 650) Main blade group (max. blade diam. / power) 355 mm / 7.5 kW Engraving group (max blade diam. / power) 200 mm / Kw 2.2 Adjustable speed of the blade carriage Pusher wagon with 10 clamps Blade carriage speed 1-120 m/min Pusher speed 60 m/min Twin Pusher 1.2 system with 1 additional clamp on pusher carriage (position 570 mm) to perform different patterns cutting at the same time TECHNICAL DETAILS TO BE CHECKED Do Ia Ujv Amx Tjp Thout

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, cutting length (max.): 3,400 mm, cutting width (max.): 1,250 mm, cutting height (max.): 130 mm, cutting height with scoring (max.): 130 mm, saw blade diameter: 400 mm, table length: 3,200 mm, overall weight: 1,000 kg, rotational speed (min.): 3,000 rpm, rotational speed (max.): 5,000 rpm, Equipment: motor brake, scorer, Image 1+2: Used Hans-Schreiner HTS250-1 € 1,890.00 Image 3+4 Demonstration machine, slightly used with guarantee! € 3,300.00 Holzprofi Maker panel saw PS315F-2600 Smooth sliding panel carriage with large extension table, pivoting circular saw blade, parallel stop. Space-saving thanks to easily removable extension table. Scoring device, miter stop and eccentric clamp as standard. Technical data: Main motor power S1 3.8 kW Voltage 400 V Saw blade inclination 45° Format table size 2600 x 267mm Cutting length 2750 mm Blade size 315 mm Bo. 30 mm Scoring blade 100 mm Bo. 20 mm Cutting depth 90°/45° 100 mm / 80 mm Saw blade speed 4500 rpm Scoring blade speed 8500 rpm Extraction connection 100 mm Groove cutter thickness 6-22.5 mm Groove cutter bore 30 mm Weight 336 kg Image 5 Exhibition machine Holzprofi Maker PS315F-2000 for € 3,130.00 Image 6-11 Holzprofi KS400D-3200 € 7,120.00 Main motor power S1: 5.5 kW Groove cutter power S1: 0.75 kW Voltage: 400 V Saw blade inclination: 0-45° Format table size: 3200 x 432 mm Format table travel: approx. 3400 mm Blade size: 400 mm Cutting depth: 130 mm Scoring saw blade: 120/20 mm Saw blade speed: 3000/4000/5000 rpm Scoring saw blade speed: 8000 rpm Cutting width: 1250 mm Weight: 1000 kg Image 12: Holzprofi format circular saw KS315 including scoring unit, smooth-running format sliding carriage with large extension table, pivoting circular saw blade, finely adjustable parallel stop including miter stop and eccentric clamp. Very stable guide of the format table for precise work even with heavy workpieces. With its own motor for the scoring unit for easy switching off. Main motor power S1: 4 kW Pre-scoring motor power S1: 0.75 kW Voltage: 400 V Saw blade inclination: 0-45° Format table size: 3200 x 375 mm Format table travel: approx. 3400 mm Blade size: 315 mm Cutting depth: 100 mm Dj Ia Upsuf A Rxs Theut Pre-scoring saw blade: 120/20 mm Saw blade speed: 4500 rpm Pre-scoring saw blade speed: 8000 rpm Cutting width: 1250 mm Weight: 700 kg € 6590 incl. 20% VAT Image 13: Holzprofi FPL1600VR used machine Motor output 4.6 kW S6 (3.75 kW S1) Voltage 400 volts Max. saw blade diameter 305 mm Cutting height 0 to 90 mm Format table size 1600 mm x 316 mm Table movement 1800 mm Cutting width 835 mm Speed 4000 rpm Saw blade swivel 90-45° Weight approx. 360 kg €2990.00 Image 14: Holzmann TS250 table saw, good condition, 2 kW, approx. 85 kg €790.00

Year of construction: 2006, Condition: excellent (used), Fly wheel diameter : 800 mm Engine size : 4 Kw Tilt of table : 0 - 45 degree Dus Ia Uolk Ilyop Thet CoMaFer feeder with adjusteble speed, rubber feed wheel ( Year 2020 ) Maximum cutting hight : 680 mm Maximum cutting width : 750 mm Machine measures : L 1400 x W 1000 x H 2700 mm Request live video presentation on WHATSAPP

Condition: excellent (used), TECNI-ARMENTIA CH-70 edger - hydraulic control - the possibility of programming the width - saving up to 12 programs - centering table TECHNICAL PARAMETERS: cutting width max. 700 mm cutting height max. 130 mm main engine power 55 kW material width max. 830 mm length of the fixed sleeve 300 mm length of the movable sleeve 100 mm min. material length 700 mm spindle diameter 65 mm sleeve diameter 85 mm disc diameter 350 - 400 mm hydraulically smoothly adjustable feed feed speed up to 38 m / min feeding table 2700 mm roll width 700 mm roll diameter 140 mm centering feeding table Dj Iasidmpts Up Thjut two lasers pump motor power 4 kW row of anti-recoil pawls three upper pulling rollers three lower pull rollers hydraulic pressure hydraulic height adjustment dimensions (length / width / height) 480/200/230 cm weight 4000 kg

Condition: used, High-performance cutting and ripping machine or double cutting system Philipp for the re-cutting of unedged models. The system measures, cuts and trims models after a block band saw or similar. The exact scope of delivery of the mechanization is to be agreed. The system is still in operation and can be inspected. The dismantling must take place around the end of September 2025. workpiece length: 1,500 – 5,000 mm Do Ia Usvwl Tlsp Thjut workpiece width: 200 – 1,000 mm workpiece height: 45 – 160 mm

Condition: used, Technical data: Saw diameter: 500 mm Saw spindle diameter: 30 mm Saw feed manual Max cutting height: 150 mm Max cutting width: 500 mm Table width: 580 mm Table with 6 rollers in the table Diameter of rollers: 60 mm Extraction spigot diameter: 100 mm Duj Ia Uperi Skwj Thst Power supply: 400 V Motor power: 4 kW Overall dimensions: Length: 4000 mm Width: 1180 mm Height: 1700 mm

Condition: used, Year of construction: 2020, Numerically controlled squaring machine Main motor kW 5.5, rpm Table length mm 3200 Separate pre-cut motor 0.75 kW, 8000 rpm pre-cut shaft ⌀ 22 mm Saw blade diameter mm Main disc overlap 9 mm - 105 mm/70 mm Weight: 890 kg TECHNICAL DETAILS TO BE VERIFIED Dus Ia Up Tev Ak T Ujhet

Condition: good (used), Year of construction: 2021, Functionality: fully functional, saw band width: 35 mm, type of input current: three-phase, Dear interested party, the used and demonstration machines are located in A-3202 Hofstetten, if you are interested or have any questions, just call us or send us an email. In some cases no tax can be shown, estimate. Photo 1 CTR520 used, good condition € 3,990.00 Photo 2 HBB550 exhibition machine from € 3,300.00 Photo 3-5 Logosol B1001 built in 2021, little used (only 6 months) with chassis, computer, hydraulic trunk compensation, and much more. 18,900.- Photo 6+7 CTR750LX exhibition machine fully equipped, Incl. conversion trailer at a special price, available immediately Photo 8, Forestor-Pilous, CTR750EV with cutting thickness calculator, 5.7 m cutting length, BJ2022, 10,600.- Photo 9 CTR550 Bj 2023 4kW 5.7m cutting length € 5,490.- Photo 11 CTR550 exhibition machine from € 5,300.- Photo 12 CTR750EV exhibition machine from € 11,500.- Technical data CTR750EV: max. log diameter 750 mm Dj Iasufxl Se Up Thsut max. board width 620 mm Motor output S6 7 kW (5.5 kW S1) Motor output feed motor 0.37 kW max. Feed speed 17 m/min Cutting length 3.45 m (can be extended indefinitely) Min. cutting length without aids 0.75 m Saw band length 4140 mm Saw band width up to 35 mm Diameter of the band wheels 500 mm Dimensions W x H x L 1980 x 1670 (1910) x 5300 mm Belt speed 13 m/sec Weight 460 kg Technical data CTR800S: Max. log diameter 83 cm Motor output S1 7.5 kW Cutting length 1.8 m Weight 750 kg

Condition: like new (used), Socolest DAS 200 twin-shaft multiblade feeding and receiving table - Made in Italy - centering feeding table - discharge receiving table - top drawing rollers TECHNICAL PARAMETERS: - cutting height 200 mm - cutting width 400 mm - engine power 2 x 55 kW - track width 630 mm - disc diameter max 350 mm - feed speed 40 m / min - hydraulic roller height adjustment - hydraulic cutting height adjustment - hydraulic feed - four top pulling rollers - four rows of anti-rejection latches Duo Ia Upsqup Ans Thot - shaft diameter 70 mm - sleeve diameter 90 mm - pneumatic side pressure centering - diameter of ferrules 2 x 250 mm - minimum workpiece length 720 mm - laser - feeding table belt 5700 mm - width of table 600 mm - top roller pneumatic pressure roller - speed of table regulated on inverter - receiving table 9200 mm - width of rollers 800 mm - diameter of rollers 135 mm - four drop chains - distance between chains 1900 mm Transport dimensions 1300 cm x 240 cm x 200 cm weight 8 t

Condition: used, Paul K34 multi-blade saw for sawing, trimming, ripping or grooving boards. The system is still in operation and can be inspected. Dismantling must take place around the end of September 2025. cutting height: 105 mm passage width: 940 mm Due Iaevwlcye Up Thjt Driven rollers: 12 feed: 0 – 80 m/min

Year of construction: 2011, Condition: good (used), Saws sliding table saw WALTER FWR 500/2 - Polish production - DTR, CE - year of production 2011 TECHNICAL PARAMETERS: - the minimum length of the material after formatting is 800 mm - the maximum length of the material after formatting 1600 mm - maximum material width 480 mm - maximum material thickness 145 mm - disc diameter 500 mm - feed smoothly adjustable 0-20 m / min - main engine power 2 x 5.2 kW Do Ish Dwmlsa Up Thsut - 1.5 kW feed motor power Machine dimensions: 340x230x180 weight 2500 kg