Double shaft multiblade mod. SQUALO 522

TRADEMAK SRL SQUALO 522

Condition: good (used), Year of construction: 2004, functionality: fully functional, feed rate X-axis: 160 m/min, controller manufacturer: Mircotec, workpiece length (max.): 5,500 mm, workpiece width (max.): 700 mm, workpiece height (max.): 100 mm, spindle motor power: 90,000 W, rotational speed (max.): 3,100 rpm, Automatic edging line BFB woodworking machines with Mircotec control. Year of manufacture 2004/2021. Maximum edging width 700mm, maximum edging thickness 100mm, 90kW drive motor. 4 adjustable saws. Included are cross conveyor in the basement, steep conveyor, cross-cut table, measuring/alignment, edger, splitter wedge, and board sorting. The line is fully functional and in good condition. Overhauled in 2021. Kodjxfb Ecepfx Ag Aodw

Year of construction: 2022, condition: as good as new (ex-display), Aluminum angled conveyor belt with substructure horizontal range: 3,000mm Rising range: 5,000mm Lead angle in the kink: 35, 40 or 45° Total conveyor length: - Drop height: - Kjdpsi Igzfofx Ag Aodw Height of horizontal: - Conveyor belt width 600mm (extendable) Drive roller + deflection roller Ø150x620mm S235 steel welded and machined Steel deflection roller stored in the kink and crowned overturned Aluminum profile construction 135x45mm reinforced PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge petrol matt Drive: Motor 1.1KW, speed 0.3m/sec Connection 230/400V, 50Hz protection class IP54 Drive etc. ready for connection, motor 2 pcs. corrugated edges 80x45mm 39 pcs. T60 studs, pitch 401mm 2-layer particularly laterally stable Usable width 470mm, results as follows: Transverse arrangement -70+45-50+470+50+45-70mm

Year of construction: 2005, condition: ready for operation (used), Wielopła Brodpol WP-165 2W - machine in stock - Polish production - Year of production 2005 TECHNICAL PARAMETERS: - cutting width 380 mm - cutting height 165 mm - diameter 300 mm - four upper pulling years - pneumatic roller pressure - four lower pulling rollers - two rows of pawls - diameter of spindles 70 mm - spindle speed 3640 rpm - main engine 2 x 55 kW - total power of 114 kW - 500 mm horizontal clearance Kdjdpfxefum U Es Ag Aew Machine dimensions: - length 220 cm - width 180 cm - height 220 cm - weight 2,940 kg

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: KME 2/750L, Tension carriage for saw frame Viewings are available by appointment. Kjdpfsv Umb Esx Ag Aedw

Condition: used, Year of construction: 1994, Double spindle multi rip saw - Manufacturer: A.Costa Ksdpfx Agotqld Us Aedw - Model: Jaguar - Max cutting height: 200 mm

Condition: ready for operation (used), functionality: fully functional, Wurster & Dietz Trimming and Re-Cutting Machine Type FR7 with in-machine adjustment Star-delta soft start Kedpfx Agsv I D Shj Ajdw Feed roller table Single-blade spiral roller chip separator Chips discharged into a trolley Main product on the feed roller table

Condition: used, Year of construction: 2008, Bioflamm SR-EB9 wood chip boiler, moving grate furnace, year of manufacture 2008, a new heat exchanger was installed in 2018, output 830 kW, hot water system max. temperature 120°C, incl. feed auger with backfire protection, incl. fuel chain conveyor, incl. 2 pcs push floor containers of 30m³ each, incl. automatic ash removal, incl. hydraulic unit, incl. control system, dismantling must be carried out by the buyer. Kdedpfx Ajvytfueg Ajw

Condition: new, functionality: fully functional, Year of construction: 2023, operating hours: 4 h, machine/vehicle number: 15582, VOLVO wheel loader L60H with high-tipping bucket (SW mount) • Tires 600/65R25 Michelin XLD (L3) Kdsdpfxsvmp Hns Ag Aew • Rims for 20.5-25 and 600/65-25, three-part • Full-cover fenders for wide tires 65 series • Mud flaps for wide tires 65 series • Mesh filter in the filler neck • Hand throttle • Automatic engine shutdown • Machine shutdown, delayed • Engine D6J, emission level V (EU) • Reversible fan • Speed limiter, 40 km/h • Traction roller • Premium comfort seat / 3-point belt (air-suspended, heated, horizontally suspended) • Air conditioning incl. automatic climate control ACC • Radio DAB + incl. USB and AUX connection / Bluetooth • DAB + radio preparation right, incl. loudspeaker • Steering wheel button • Sliding window in the driver's door • Sun blind, side window • Rear view camera incl. LCD monitor (color) • Emergency steering • S-cab air filter • CDC comfort driving and steering gear • Operating permit attached in the cabin (wire cable) • Electrically adjustable, heated rear view mirrors • Noise reduction kit, EU excl. sticker • License plate holder incl. lighting • Driving/main headlight LED asymmetrical right • LED power package • Rotating beacon, LED • Reversing warning device (acoustic) broadband sound • 4th hydraulic circuit (standard mast) b. Multi-lever operation • Separate device lock for quick coupler • Central lubrication system (Volvo) • Wheel wrench set • Tool set • Step, right side • BSS mast damping • Additional counterweight 500kg for wood and industrial applications • Trailer coupling • Reinforced protective grille for rear lights • Tooth guard for bucket • Protective plates for rear frame, right and left • Sound marking • CE marking • Kit German version • Caretrack GSM (hardware) • Caretrack GSM basic version (according to current VCE conditions) • Hydraulic quick coupler • VOLVO high-tipping bucket – SW mount, width: 3,000mm, capacity: 7m3

Condition: good (used), cutting height (max.): 200 mm, chain width: 400 mm, input voltage: 380 V, height adjustment type: electric, rotational speed (max.): 3,400 rpm, power: 37 kW (50.31 HP), MAX cutting depth: 200 mm Chain width: 400 mm MAX distance between exterior blades: 380 mm Blades diameter (min/max): 250 / 350 mm Adjustable feeding speed (inverter): 5 – 30 mt/min MIN workpieces lenght: 1000 mm Blade holder diameter: 70 mm Spindle shaft speed: 3.400 RPM Kodpfx Aetvpfmsg Aodw Main motors power: 2 x 37 kW

Condition: reconditioned (used), Year of construction: 2018, The SQUALO 420 multi-blade or multi-blade circular saw with double shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. Ideal for the production of strips, squares, sawn timber, profiles, edged boards, prisms, boards, elements for pallets. SPECIAL PRICE, Ksdpfxshrdxio Ag Aedw OFFER OF THE MONTH UNBEATABLE PRICE