Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 3394, - 3700 mm cutting length - milling unit - rear support table - digital position display / adjustment via hand-wheel - gear rack balance on pressure beam - fence - pneumatically adjustable (autom. activated) - Touch panel - Front support table, pneum. adjustable Deb He Ic Rdjn Tppekl - Fence - pneumatically adjustable – 2 steps 600/900 mm

Condition: like new (used), Year of construction: 2021, Functionality: fully functional, saw blade diameter: 600 mm, cutting height (max.): 180 mm, feed length X-axis: 3,200 mm, The KP 900 EasyCut cut-off saw is a suitable solution for companies that process solid wood and place maximum emphasis on the quality and yield of their production. It is used to cut out defects and optimize lengths. On average, up to 900 bm/hour can be processed on this saw. (for material with a length of 4 m with 8 cuts). The saw can be operated by one or two workers, depending on the nature of the processed material. The optimization saw KP 900 EasyCut is suitable for production, which is focused on cutting accuracy, minimization of cargo waste, speed but also safety of work. The advantage of the machine is a high degree of flexibility in the input and output dimensions of the processed material. Controlling the saw is intuitive and special software facilitates programming and entering cutting parameters. KP 900 EasyCut has extended mechanization options at the output. Device functions Length optimization The function consists in minimizing waste and maximizing the yield of the assortment. The inserted material is optically scanned by the binder and automatically precisely laid out on the cross-section of the specified lengths of the selected program. The optimization system then always prioritizes the cut of the longest specified length that fits into the inserted material. The saw automatically measures the length of each inserted piece, so it is not necessary to sort the material in advance by size. In the case of marked defects, the material is optically divided into individual pieces by the binder (from defect to defect) and these pieces are again separately optimized for length. If the cut part does not meet the length of the smallest length in the program, it goes to waste. Automatic front and back cropping can be set in the selected program. Qualitative optimization - waste The essence of this function is that the operator performs a visual assessment of the cut piece and marks with two perpendicular lines the places with defects that must be cut out with special chalk. By moving the binder with special optics over the cut material, the current positions (chalk strokes) of the necessary cuts are recorded. The resulting parts in different lengths (from defect to defect) are automatically length-optimized and cut to the required lengths using the software according to the cutting program. If the cut part does not meet the length of the smallest length in the program, it goes to waste. Automatic front and back cropping can be set in the selected program. Solid and massive construction with a robust cover of the cutting area Dkjb Hev Iz Rnon Tppsl guarantees high work safety. Quality of individual components, material and processing ensures trouble-free operation of the equipment and a long service life in demanding working conditions. Material flow In the basic design, the saw is LEFT oriented, i.e. material flow is from right to left. Automatic loading system is a combination of sophisticated printing equipment and optics. The system is an integral part of the entrance table. It moves along a precise linear rail with bearings and ensures very precise positioning of the workpiece in the cut (up to ±0.1 mm). Thanks to the optical integrated system, the loader reads the length of the material, marked defects and quality. Clear touch 15" display

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Machinery Hydraulic Pumps Dkjb Hn Tjv Iy Ixoppsl 2 x 10 t each 2 x 5 t Used Payment before delivery

Condition: used, Panhans format saw 320cm carriage on bars Dkeb Hsv Iqp Hen Tppol up-down and angle saw adjustment hydraulically 5.5KW main engine undercutter on a separate engine 3 cutting speeds max. 400mm discs machine in good working order, ready for testing

Condition: used, Year of construction: 1998, SECOND-HAND CIRCULAR SAW CASADEI MOD. KS 3400 - CE RULES Dkebsrwxqye Hn Tppjl - Carriage mm. 3400 - KW 7.5 - SN 98-36-014 - Year 1998

Condition: excellent (used), Circular saw flat motor KATT 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second stub shaft for hydraulic pump drive with pulley 150 mm Ø, tested and with new bearings. Djb Hn Tpjh D Rt Aopjkl

Condition: new, Year of construction: 2025, + with automatic feeding + intuitive operation via Touchscreen + saw unit 2.2 kW (3 PS) - invinitely variable height-adjustable on two high precision ball-rail-systems + milling unit 1.1 kW (1.5 PS) - invinitely variable height-adjustable on two high precision ball-rail-systems + cutting and milling height 45 mm + saw- and milling unit can be lifted and lowered pneumatically + front support table pneumatically adjustable - width of support: 230 mm + guiding of the saw- and millingunit via of two high precision ball-rail-systems + central lubrication points for the simple and complete maintenance of the guiding carriage Djb Hn Tjbnu T Aoppekl + pneumatic axial saw blade adjustment, 0 – 2 mm infinitely variable + electromotoric feed of the saw- and millingunit, (2 – 20 m/min infinitely variable) in self-holding contact + swivel switch console with rotating operating console + transparent lamella cover protects the cutting area + area of the saw and milling unit is totally fenced in metal sheets in front and at the side + power supply in cable duct with plastic link track + chipping device up to 25 mm + safety equipment

Condition: used, 900mm steering wheels 18.5kw motor Dsb Hn Tpsv Aub Aepjkl Voltage 380V

Condition: used, Year of construction: 1998, machine/vehicle number: 5363, Nutzbare Schnittlänge : 4200 mm Schnitttiefe : 4200 mm Sägeblattüberstand : 105 mm Anzahl Spannzangen : 7 Stk Leistung Motor Hauptspindel : 9 kW Durchmesser Hauptsägeblatt : 355 mm Durchmesser Vorritzsägeblatt : 127 mm Dkjb Hn Tpeuf Hxyepel Vorschubgeschw. Sägewagen Vorlauf : 5-60 m/min Vorschubgeschw. Sägewagen Rücklauf : 80 m/min Seitenausrichter : ja Stk Vorschub Schieber : 25 m/min Rücklauf Schieber : 60 m/min Steuerung : Steuerungsrechner Anzahl Auflagetische : 4 Stk Ausführung Auflagetisch : Luftkissen

Condition: excellent (used), Socomec band saw Roll diameter 700 mm APA precision guide top and bottom Table size 700 x 930 mm pivoting Cutting height 430 mm Cutting width 670 mm Weight 420 kg Condition very good Dob Hn Tjuumydoppjkl Price 1800.-

Condition: excellent (used), Functionality: fully functional, saw blade diameter: 700 mm, saw drive: 7,500 W, operating pressure: 6 bar, disc diameter: 700 mm, Large size carpenter industrial cutting circular saw. Powerful engine: 7,5Kw. 380V. Forward and backward movement is pneumatic. Height adjustment is electric. Djb Hsv Ic Iujn Tppokl La diameter: 700mm.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 6 h, Functionality: fully functional, saw blade diameter: 350 mm, power: 0.003 kW (0.00 HP), with 2 1 m roller tables 1 HM circular saw blade Dobjtq Efhs Hn Tppokl with CE protective cover Technical data: TR 350 Motor power (kW): 3 Speed (rpm): 3000 Max. saw blade diameter (mm): 350 max. drill diameter (mm): 30 Maximum cutting capacity (mm): 160x80-220x30 Diameter of suction pipe (mm): 2x80 Net weight: 150 kg

Condition: good (used), Year of construction: 2007, WoodMizer Multihead MH3D Horizontal Trak Splitting Machine - manufactured in Poland - year of production 2007 - DTR and CE TECHNICAL PARAMETERS: - cutting width mini / max 20 - 300 mm - cutting height mini / max 6 - 300 mm - minimum element length 450 mm - motor power 3 x 11 kW - hydraulic feed - pump power 4 kW - width of cutting belt 190 mm - lubrication of cutting belts - length of cutting belts 5200 mm - hydraulic tension of cutting belts - width of cutting belts 30 mm Overall dimensions of the machine 570x240x205 cm Dksb Horwl Eyjn Tppol weight 1800 kg

Condition: refurbished (used), Year of construction: 2015, Functionality: fully functional, cutting height (max.): 215 mm, cutting width (max.): 1,520 mm, cutting length (max.): 7,200 mm, total length: 9,000 mm, overall weight: 2,800 kg, saw blade diameter: 550 mm, table height: 850 mm, power: 11 kW (14.96 HP), We sell: JRIMAC rip saw TOP - Used and refurbished in our workshop - - Cutting length: 7.200mm - cutting width: 1.520 mm - Engine power: 11 kW - Cutting height: 215 mm - Custom-made rear machine table: The 10 metal supports with ball rollers with a length of 1,200 mm ensure comfortable handling of the material. - 7 metal supports with ball rollers in the front machine table - 4 swivel support arms (length 300 mm) with Pertinax coating on the front machine table to extend the support depth. - Semi-automatic stepless saw blade height adjustment - Sliding control panel - Precise, clean cut - Cutting accuracy +/- 0.5 mm - Downholder with extremely strong blade guard and suction connection - SPS machine control Dsb Hn Totv Ddnoppskl - Stepless, frequency-controlled, powerful feed motor - Convenient semi-automatic saw blade height adjustment - Stepless width stop adjustment - JRIMAC" saw blade quick clamping system - Plastic front table support - Forced-guided riving knife - Lower standard extraction channel installed ready for connection - CE-compliant, dust-tested - Processing of more than 12 different materials possible - Reliable spare parts and customer service

Condition: used, Year of construction: 1991, machine/vehicle number: 20544, max. Schnittbreite : 5300 mm max. Schnitthöhe hor. : 2100 mm max. Schnitthöhe vert. : 2200 mm max. Bearbeitungsdicke : 80 mm Sägeblattdurchmesser : 300 mm Sägeblattbohrung : 30 mm Auflage unten : Rollen starr Materialauflage : Holzlattung ausweichend Kleinteilauflage : Nein Messsystem : Skala Schwenkung Sägekopf : manuell Sägevorschub : manuell Befestigung : freistehend Dob Hn Tpoucam Ejpokl Absaugung : externe Absaugung Motorleistung : 4 kW Absaugdurchmesser : 120 mm Digitale Maßanzeige in X und Y Richtung. Motorbremse neu nachgerüstet - BG freundlich.

Condition: good (used), Year of construction: 1984, STANDARD HJO Maximum width : 400 mm Maximum cutting hight : 105 mm Spindle diameter : 80 mm Infeed conveyer belt in very good condition Laser fence Engine size : 75 Kw / 100 Hp. Central lubrication Dksb Hn Tpsl U Algepel

Condition: excellent (used), Working width 75 - 300 mm Working height 10 - 400 mm Feed continuously adjustable electrically 0 - 30 m/min Min cutting height 4 mm Max cutting height 200 mm Deb Hsv H U Nhjn Tppskl

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.] Dkob Hn Tov Aalyoppjl

Condition: good (used), Gabbiani SA 300 multi-saw - Italian production Dkebohcwrko Hn Tppjl TECHNICAL SPECIFICATIONS: cutting width 300 mm engine power 40 kW cutting height 100 mm smoothly adjustable feed feed speed range 8-56 m / min blade diameter 300 mm spindle diameter 50 mm sleeve diameter 70 mm 3 upper pressure rollers minimum material length 700 mm table top dimensions 1750 x 700 mm three rows of pawls height from the base 740 mm stub diameter 2 x 150 mm dimensions (length / width / height) 270/170/160 cm

Condition: used, SECOND-HAND BAND SAW CENTAURO MOD. 800 Dkeb Hsr Ilxcjn Tppol

Condition: used, Year of construction: 2004, machine/vehicle number: 04140128, max. Schnittbreite : 4200 mm max. Schnitthöhe hor. : 2080 mm max. Schnitthöhe vert. : 2200 mm max. Bearbeitungsdicke : 60 mm Sägeblattdurchmesser : 250 mm Dkobovnw Nms Hn Tppel Sägeblattbohrung : 30 mm Auflage unten : fest, mit absenkbaren Rollen Materialauflage : Kunststofflattung ausweichend Kleinteilauflage : Ja Messsystem : Skala Schwenkung Sägekopf : manuell Befestigung : freistehend Gewicht ca. : 450 kg Motorleistung : 3 kW Absaugdurchmesser : 100 mm

Condition: ready for operation (used), Functionality: fully functional, cutting height (max.): 250 mm, overall weight: 7,500 kg, saw blade diameter: 400 mm, cutting width (max.): 450 mm, power: 0.004 kW (0.01 HP), Two-shaft multi-saw 2x110 kW TOS SVITAVY PWR 422 - Czech production - twin-shaft - DTR documentation TECHNICAL DATA: Dkjb Hjri Nvven Tppol - max cutting height: 250mm - track width: 450mm - shaft width: 450mm - disc bore diameter: 80mm - shaft diameter: 60mm - min disc diameter: 300mm - max disc diameter: 400mm - max width of input material: 860mm - min length of processed material: 1500mm * From above: - Rejectors: + - Drawing shaft, metal pneumatically pressed: + - rejects: + - drawing shaft, metal, pneumatically pressed: + - pressure: + - saw shaft: + - pressure: + - 2 pulling shafts, metal pneumatically pressed: + * Bottom: - metal roller, sliding: + - guide: + - rejects: + - track: + - saw shaft: + - track: + - infinitely adjustable feed speed on inverter: 4-40m/min - main motors: 2x110kW - feed motor: about 3kW - electric lifting of the body up/down: 0,55kW - electric adjustment of saw shafts: 2×0.18kW - central lubrication - diameter of the extraction stub: 2x300mm - dimensions L/W/H: 3400x2650x2200mm - weight approx: 7500kg

Year of construction: 2000, Condition: good (used), Multiblade tracked SCM M3 4 - Italian production - year of production 2000 - DTR TECHNICAL SPECIFICATIONS: track width 300 mm cutting height 120 mm engine power 25 kW max. blade diameter 350 mm max. workpiece width 1000 mm min. workpiece length 400 mm adjustable feed on the inverter pneumatically adjustable ruler on the right revolver ruler setting of 6 types Dksbsg Tdfdo Hn Tppjl three rows of anti-recoil pawls possibility of putting on a board - a shoe spindle diameter 50 mm sleeve diameter 70 mm sleeve equipped with spacers automatic central lubrication four upper pressure shafts spigot diameter 180 mm and 120 mm dimensions of the machine (length / width / height) 210/175/160 cm weight 1800 kg

Condition: like new (used), A. COSTA PUMA 2/50 350/160 twin-shaft multi-blade saw - made in Italy Dksb Hn Tpjqy E Rlopsl TECHNICAL PARAMETERS: cutting width 350 mm cutting height 160 mm 37 and 45 kW motors feed motor 3 kW adjustment of the width of the lower shaft blade diameter max 280 mm spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm width of track 350 mm total power 85 kW two feed speeds 15 and 22 m/min central lubrication minimum workpiece length 600 mm electrical height adjustment shaft height adjustment six top pressure rollers pressure rollers mechanical four anti ejection latches cast iron construction spigot diameter 2 x 220 mm rotation of spindles 4500 RPM overall dimensions of the machine (length / width / height) 250 / 235 / 210 cm weight ~ 5000 kg

Year of construction: 1993, Condition: good (used), COSMEC SM 400 multi-saw - after the technical review Dsb Hn Tpogyz Rvjpokl - very good condition - Italian production - year of production 1993 TECHNICAL PARAMETERS: cutting width 400 mm cutting height 160 mm engine power 37 kW smoothly adjustable feed speed spindle diameter 55 mm sleeve diameter 70 mm four rows of anti-recoil pawls the three upper pressure rollers table width 710 mm minimum element length 700 mm shaft height adjustment guide ruler laser central lubrication spigot diameter 200 mm dimensions of the machine (length / width / height) 220/190/180 cm weight 1800 kg