Condition: good (used), Year of construction: 1986, well-preserved longitudinal saw, but without slat carrier max. cutting length 6.2 m Dcobvmk Hsvrqhwe Ueg max. cutting width 0.6 m max. cutting height max. cutting height 170 mm with number wheel display for width measurement with laser

Condition: used, Year of construction: 1982, Max. blade length: 4550 mm Motor power: 2.2 kW Roller diameter: 600 mm Max. cutting height: 395 mm Max. cutting width: 585 mm Table tiltable: Yes Stand side: Left Stop ruler: Can be used on both sides Saw blade guide position: Top and bottom Saw blade guide: Roller guide Design: Stationary Weight approx.: 300 kg Dimensions: 1115 x 670 x 2115 mm Dsbov Acchjvmk H Uecg Storage location: Nattheim

Condition: used, Year of construction: 2004, Length of sliding table: 3.000 mm Cutting width: 850 mm Cutting height max: 170 mm Saw blade diameter max: 500 mm Saw blade height adjustment: electro-motive Saw blade tiltable: electro-motive Main motor power: 5,5 kW Rotation speed steps: 3 Scoring aggregate: Yes Scoring saw height adjustment: electro-motive Scoring saw width adjustment: electro-motive Parallelanschlag, Digitalanzeige: Yes Djbvmkov I Axgj H Ujcg Winkelanschlag, Digitalanzeige: Yes

Condition: used, Year of construction: 2015, machine/vehicle number: 00, ACM Star 700 vertical sawing machine Year of construction 2015 Dsbvmkelp Irre H Uecg

Condition: ready for operation (used), Year of construction: 1994, Holzma HQP 11 Panel Saw The line is still connected and can be tested on site. Dcsbvmkewdrh Is H Ujg

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 53900 € 1083.39 € Doppelsäulenführung 7000x41x1,3 mm 15 - 120 m/min 560 mm 540 mm 810 x 530 mm rund 520 mm, quadrat 520 rund 520 mm, quadrat 520 rund 330 mm, quadrat 330 875 mm 1.1 kW Dcsbvmsvvngxek H Uog 4 kW 0.12 kW 3850 mm 1700 mm 2450 mm 3400 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller table see photo - optional available, additional price)

Year of construction: 1962, Condition: good (used), large band saw with 1250 mm roller diameter with center cutting device 45 kw motor roller width 120 mm with electr. saw blade tensioning the upper wheel has been removed for transport Dcobofnh T Iovmk H Ueg very good condition because little run was overhauled in 1997

Condition: good (used), Code: 0092 Brand: STROMAB Model: PS 45/F - CE Standard Pendulum saw for cutting wooden boards, packaging, sawmills, joinery, wood window frames and various - CE Standard Dcebvjwb Hrpemk H Ueg Technical data: Manual feed Blade diameter mm 450 F30 - Speed 2800 rpm Motor Hp 5,5 Cutting capacity mm 510 Cutting height mm 130 Infeed and outfeed roller table mm 3000 Suction port diameter mm 150 Wheels on the base Overall dimensions mm 3700 x 1500 x 1750 h Weight kg 380

Condition: new, Year of construction: 2021, New machine Year of construction: 2021 Equipment and technical data: HOLZKRAFT HBS S - Precision wood band saw in heavy professional design with saw band quick clamping system for the professional user Heavy-duty professional design with high dead weight for maximum running smoothness Smooth and precise running thanks to torsion-free machine housing Large, one-piece cast iron saw table with ground and polished surface The solid saw table is easily and conveniently adjusted via a handwheel rack and pinion guide Debekwhatevmk H Uecg the inclination is infinitely adjustable from 0° to 45° (patented) Fast and precise cutting height adjustment via handwheel and toothed rack with millimeter scale Large cast parallel fence With angle stop as standard Technical data: Work table dimensions 830 x 600 mm Cutting speeds 1615 m/min Flywheel Ø 630 mm max. cutting height 400 mm max. cutting width with/without fence 570/ 610 mm Saw blade length 4600 mm Precision guide top / bottom Saw table inclination 0 - 45° Motor power 400 V /50 Hz/P2 3.75 kW Suction nozzle diameter 2 x 120 mm Incl. saw blades: (Uni 4600x10x0.5 mm; Z4) (Uni 4600x20x0.5 mm; Z4) (Uni 4600x25x0.5 mm; Z4) Location: Hochheim Availability: Immediately

Condition: excellent (used), Year of construction: 1978, Vertical Wood Band Saw Pfaffenbach HBS 600 Manufacturer: Pfaffenbach Type: HBS 600 Vertical Wood Band Saw Year of Construction: Approx. 1978 Condition: Very Good Heavy Cast Iron Construction Thrust: 592 mm Max. Cutting Height: 240 mm Table: 750 x 640 mm, pivoting with stop Drive: 2.2 kW Weight: 500 kg Accessories: 2 Spare Saw Blades Djbvmowb Euvsk H Uscg The machine is in very good condition and can be inspected and demonstrated in our workshop. We would be pleased if you are interested in our offer. Errors, changes, and prior sale excepted.

Condition: like new (used), Year of construction: 1993, operating hours: 1,100 h, Functionality: fully functional, Still a very nice rip saw with only 1100 operating hours, almost like new. Make: Irion, Type: HFS 170, built in 1993. Dsbvmk Hjv T Rc Ds Ujcg Max. cutting length: 6200 mm. Max. cutting width: 600 mm. Max. cutting height: 170 mm. With digital width display. With laser.

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Equipment and technical data: - Wheel diameter: 600 mm - Belt speed: 1550 m/min - Cutting height: 400 mm - Cutting width: 580 mm - Blade length max.: 4735 mm - Saw blade width min. / max.: 15 mm / 30 mm - Optional with special coating Saw blade width min. / max.: 8 mm / 25 mm - Table size: 810 x 590 mm - Table height: 920 mm - Suction nozzle: 2 x Ø 100 mm - Motor power: 2.2 kW / 3 HP - Voltage: 400 V / 50 Hz - Color: RAL 7035 light grey and RAL 5000 violet blue - Net weight: approx. 275 kg TECHNICAL DESCRIPTION - Solid German mechanical engineering - Machine stand in elegant, modern, torsion-free double chamber welded steel construction Dobsudqluevmk H Uscg - Upper and lower door secured by limit switches - Upper and lower precision band saw blade guide APA 2, size 2 - Finely planed cast iron table - Swivel table top up to 45 - Dyn. balanced band saw wheels with vulcanized rubber bandages - Stop guide can be used to the left of the saw blade, stop profile can be folded down - Blade tension indicator - 1 saw blade 4735 x 25 x 0.6 mm, tooth width 9 mm, no. 3780.250D - Mechanical height adjustment of the saw blade guard by handwheel with locking pinion - From 2.2 kW - Rotary cam switch with direct start and emergency stop button - From 3.0 kW - Rotary cam switch with star-delta start and emergency stop button - Mechanical motor brake with main switch and motor protection relay - CE-compliant incl. transport pallet incl. pre-freight to 65239 Hochheim Availability: short term Storage location: Hochheim

Year of construction: 1992, Condition: good (used), fully automatic programmable capping with additional line detection for defect capping via LUT system infeed belt 6 m 6 ejection stations total length 12 m The infeed belt is not running at the moment, probably because of the frequency converter. Dcobvmksl H E Tae H Uog

Condition: new, Year of construction: 2022, New machine Year of construction 2022 large radial circular saw for cutting to length and trimming floorboards quick changeover between double miter cuts or cutting to length robust cast iron swivel arm with interchangeable hexagonal guides Dcobvoq Ilxwjmk H Ujg saw arm can be swiveled 45° on both sides Cutting height 90° max 640x20/610x60 mm Cutting height 45° max 380 x 100 mm Cutting height -45° max 330 x 100 mm Cutting depth with motor 0°/45° 100/50 mm Diameter of saw blade/bore 350/30 mm Saw blade speed 2800 rpm Table (LxW) 1675x1060 mm Motor 3 KW/400 V Weight 220 kg Availability: short term Storage location: Hochheim

Condition: excellent (used), Year of construction: 1999, beautiful veneer saw with planing unit Dcsbsq Rb Irovmk H Ujg cutting length 3100 mm with rear fence

Condition: used, Year of construction: 1983, Double mitre saw Year of construction 1983 for dimensionally accurate cutting of small cross sections of wood, plastic and aluminum e.g. for galley rails, picture frames, edgings etc. both saw units are infinitely adjustable for 90° to 45° cuts the length is set by hand according to the scale or, in the case of pre-cut lengths by scanning with a special pair of slotted fences, which are removed from the cutting area during sawing (optional) Cutting length max. 2200 mm min. 240 m Pneumatic saw feed with oil brake cylinder, infinitely variable Clamping device from the front and/or from above, pneumatically operated, from above up to max. 50 mm workpiece height Pneumatic control Safety two-hand control, individual switching for each saw unit Djbjt Haf Devmk H Uscg Compressed air connection 6-7 bar Air consumption/working clearance 3-4.5 NL Connection for suction 50 mm Saw blade drive 2 x 1.1 kW three-phase motors 2800 rpm Dimensions 2940 x 1100 x 1220 mm Weight approx. 360 kg Availability: short term Storage location: Flörsheim

Condition: good (used), Year of construction: 1979, Veneer saw w. planing unit cutting length 3100 mm with beautiful rear fence Dcebop T T Ukjvmk H Ueg

Condition: new, Year of construction: 2024, New machine Year of manufacture 2024 Equipment and technical data: · Wheel diameter: 600 mm · Belt speed: 1550 m/min · Cutting height: 400 mm · Cutting width: 580 mm · Blade length max.: 4735 mm · Saw blade width min. / max.: 15 mm / 30 mm · Optional with special covering saw blade width min. / max.: 8 mm / 25 mm · Table size: 810 x 590 mm · Table height: 920 mm · Extraction nozzle: 2 x Ø 100 mm · Motor power: 2.2 kW / 3 HP · Voltage: 400 V / 50 Hz · Color: RAL 7035 light gray and RAL 5000 violet blue · Net weight: approx. 275 kg TECHNICAL DESCRIPTION · Solid German mechanical engineering · Machine stand in an attractive, modern, torsion-free double-chamber welded steel construction · Upper and lower doors secured by limit switches · Upper and lower precision band saw blade guide APA 2, size. 2 · Finely planed gray cast iron table · Swiveling table top up to 45° · Dynamically balanced band saw wheels with vulcanized rubber bandages · Stop ruler can be used to the left of the saw blade, stop profile can be folded over · Blade tension indicator · 1 saw blade 4735 x 25 x 0.6 mm, tooth width 9 mm, No. 3780.250D · Mechanical height adjustment of the saw blade guard using a handwheel with locking pinion · From 2.2 kW - rotary cam switch with direct start and emergency stop button · From 3.0 kW - rotary cam switch with star-delta start and emergency stop button · Mechanical motor brake with main switch and motor protection relay · CE-compliant Incl. transport pallet Incl. pre-freight to 65239 Hochheim Dcebvmk Heudqlne Ueg Availability: short term Storage location: Flörsheim

Condition: good (used), Year of construction: 1991, rip saw with 6.2 m cutting length max. cutting height 170 mm max. cutting width 600 mm with laser electr. width adjustment immediately ready for use Dsbvsut Rbvemk H Uecg

Condition: new, Year of construction: 2022, New machine, year of manufacture 2022 For large cutting lengths e.g. in kitchen construction or for floorboards Small footprint and versatile Quick changeover between double miter cuts or cutting to length Robust swivel arm made of cast iron with exchangeable hexagonal guides Movable saw unit with return spring, eightfold bearing for precise cuts Saw unit can be swiveled 45 degrees on both sides Motor with mechanical brake Aluminium fence as standard Roller conveyors with one meter length for both sides available as accessories Dcebvmk Hjkwhm Rj Usg Technical data x Dimensions and weights length approx. 2110 mm width/depth approx. 1580 mm Height approx. 1500 mm Weight (net) approx. 300 kg Connection suction: Suction nozzle-Ø saw blade guard 60 mm Electrical data: Supply voltage 400 V Mains frequency 50 Hz Power drive motor 4 kW Sliding carriage and table: Table length 2060 mm Table width 1320 mm Noise emission Sound pressure level 84 dB(A) Sound power level 100 dB(A) Circular saw unit saw blade tilt -45° 45° Swivel angle saw arm -45° 45° Max. Cutting height 45° 570 x 120 mm Max. Cutting height -45° 470 x 120 mm Max. Cross section 900 x 20 / 855 x 80 mm Max. Cutting height 0°/45° 120 / 83 mm Diameter saw blade 400 mm Diameter saw blade bore 30 mm Speed saw blade 2800 min¯¹ Location: Solingen Availability: n. Absprache

Condition: good (used), Year of construction: 1993, Functionality: fully functional, Rip saw Max. cutting length 620 cm Max. cutting width 45 cm Dcjbvmk Hewc Uwce Ueg Max. cutting height 17 cm Saw motor 11 kW Electric width adjustment Only 126 Bh

Condition: used, Second hand machine Used standing panel saw from Holz-Her company type 1211 older model; only suitable for rough ripping MNr.: 360726 Technical data: Cutting length approx. 5300 mm cutting height approx. 2200 mm Dobvmk Hskwhc Dj Uocg cutting depth approx. 80 mm saw blade diameter max. 300 mm Motor power 4 kW availability: short term Location: Röllbach

Condition: new, Year of construction: 2024, New machine Year of construction 20204 TECHNICAL DATA General information Cutting height2200mm Cutting length5100mm Cutting depth60mm Saw blade diameter250mm Saw blade speed4800min¯¹ Scoring saw blade diameter80mm Scoring saw blade speed8500min¯¹ Stops2pcs Sound pressure level89.2dB(A) Dimensions and weights Height (product) max.3100mm Length (product) approx.6300mm Width/depth (product) approx.1800mm Height (product) approx.3000mm Weight (net) approx.800kg Suction connection Suction nozzle diameter1 x 100mm Air requirement suction min.1000m³/h Dobvmk Hjtpra Ne Uecg Air speed min.20m/s Electrical data Power drive motor3kW Supply voltage400V Mains frequency50Hz SCOPE OF DELIVERY Saw blade Ø 250 x 30 x 3.2 mm Z80 trapezoid Scoring saw blade Ø 80 x 2.8-3.6 mm Z20 EQUIPMENT Lower material support Metal rollers Automatic slatted frame deflection Digital vertical dimension display Horizontal digital dimension display Panel positioning Without lifting on movable rollers Availability: short term Storage location: Röllbach

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Equipment and technical data: Cutting length: 5300 mm Dcebvovymf Uomk H Ueg Cutting height: 2200 mm Cutting depth 80 mm Saw blade diameter 300 mm Motor 4 kW - 4420 rpm. Incl. middle workpiece support on 4 fields Incl. 2 length stops with manual scale Availability: short term Storage location: Röllbach

Condition: used, Year of construction: 2023, Used machine Year of manufacture 2023 Technical specifications: Roller carriage length 3200 mm Roller carriage cutting length 3200 mm Cutting height at 90° max. 155 mm at 46° max. 105 mm Cutting width at the width stop 1250 mm Length stop on the cross slide extendable up to 3500 mm Saw blade diameter max. 450 mm Saw blade diameter (retractable under table) ø 400 mm Table size cast iron table top 1200 x 655 mm Table extension plus 750 x 655 mm Table widening 1430 x 940 mm Table height / working height +/- 20 mm 900 mm Motor power 5.5 kW / 7.5 HP Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Voltage 400 V / 50 Hz Space requirement 7000 x 3500 mm Weight approx. 1150 kg Dcobvmk Houvab Rj Uog Options: 7.5 kW motor Tele-Digit length stop With central digital, wireless 0.1 mm readout in the low-power system for both stop flaps up to 3000 mm instead of the standard length stop Double-sided miter stop DSG A For angle cuts 0° - 90° on the aluminum sliding table, length and angle measurements adjustable via scale; For cutting to lengths up to 1375 mm with length compensation for preferred angles of 5°, 10°, 15°, 22.5°, 30°, 45°, 60°, and 67.5°. Includes splinter wood, wall mount, and an additional factor scale for easily calculating incorrect miters for different workpiece widths. Swivel device for the cross slide. Quick, ergonomic sliding into the parking position. 2 clamps for trolleys. Current list price: €46,254.- Availability: Short-term. Warehouse location: Hochheim.