Condition: excellent (used), Year of construction: 1977, Panel saw Scoring unit Year of manufacture 1977 1250 mm to the right of the blade Dolip Dewc Svpo Imscg 2800 mm cutting length 5.5 kW

Condition: excellent (used), Griggio SC1400 Sliding Table Saw Djliswc Ribop D Imscg Carriage length 1400mm Cutting angle adjustment 0-45 Manual cutting height adjustment Maximum saw size 300mm Cutting height 90mm Cutting width on the right side 1050mm 4kw engine Year of production 2006 Machine weight approx. 450kg

Condition: ready for operation (used), A vertical panel saw Holz-Her is available. Cutting length: 2200mm, cutting height: 30mm, number of saw blades: 3, saw blade diameter: 300mm, panel thickness: 0mm-30mm/30mm-70mm, clamping surface X/Y: 2200mm/5300mm, vertical stroke: 2200mm, horizontal stroke: 5300mm, speed: 4420rpm, machine dimensions X/Y: 6400mm/2900mm, weight: approx. 1000kg. Including 2x 3-part folding rails and 2x adjustable longitudinal stops with scales. Documentation available. On-site inspection is possible. Dolip D Ijwftb Somecg

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 12500 mm Dcelipjwc Eu Sj D Imeg Measurements depth 12500 mm Measurements height 2600 mm Machine weight 5500 kg Main Drive Spindle motor power 30 kW Additional Equipment Under-machine waste conveyor This Circular Wood Saw was manufactured in 2008. It features a cutting length of up to 8000 mm and can handle wood heights up to 300 mm. Equipped with four blades, two fixed and two moving, all 800 mm in diameter, it ensures efficient cutting. The machine also includes a feeding line speed of 50 pcs/min and an under-machine waste conveyor. Power is supplied at 30 Kw. Contact us for more information about this machine. Application Types Sawing (Wood)

Condition: new, Year of construction: 2020, Functionality: fully functional, machine/vehicle number: 221752, Compact HEMA Table Band Saw Enclosed, modern machine housing with a left-hand stand, safety door with limit switch. Pivoting gray cast iron table, cast aluminum wheels with vulcanized and ground rubber pads, dynamically balanced. Precision roller guide at the top, height adjustable, vibration-damping wheel suspension. Three-phase motor with safety brake, motor protection via thermal sensor, undervoltage release, 3 m connection cable with CEE plug. Flow-optimized extraction nozzle, 1 saw blade. Technical specifications: Roller diameter 315 mm Cutting height 190 mm Cutting width 295 mm Three-phase motor 1.1 kW Extraction nozzle diameter 100 mm Saw blade length 2,220 mm Table size 470 x 450 mm Weight: approx. 150 kg Various versions are available: Stepless drive Movimot 10-100% (100 - 1000 m/min) Stepless drive Movimot 10-100% (100 - 290 m/min) Please specify the model when ordering. Accessories (included): Sheet steel base frame Dcolip D Iet Sd A Demog Miter slider

Condition: new, Year of construction: 2025, Equipment: scorer, Altendorf F45 exhibition machine with many extras at a special price. Dsliowfqnpsp D Imjcg Does this F45 not meet your requirements? Then contact us and we will configure your dream machine. - F45 EvoDrive - €22,130 - Extended cutting height - €700 - 5.5 kW (7.5 HP) VARIO motor - €2,410 - 2-axis scoring unit, single tilt - €3,180 - RAPIDO scoring system, single tilt - €750 - LED lighting - €320 - On/off switch on the sliding table - €740 - Cross-cut miter stop - €1,230 - 1300 mm parallel stop - €630 - Front support roller - €700 - STEG - €380

Condition: ready for operation (used), -Cutting area approx. 300 x 120 mm -saw blade 350 mm -traverse path 370 mm Dcolsbubukeip D Imog -turning knob D= 1200 mm The round table with the saw unit can be turned very easily on both sides Locks for locking are currently mounted on one side. The same can of course also be mounted on the other side Weight 890 kg

Condition: used, Year of construction: 2009, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! HOU7.338 Holzma HPP/350 Dcolowcyzgsip D Imog - 3800x3800mm - Year 2009 - Saw Carriage with Integrated side aligner - Cadmatic 4 - Saw Blade Projection 80mm - Saw Carriage Speed 150m/min - Program fence Speed 90m/min - Automitic pressure beam height control - Automatic cutting height control - Adjustable contact pressure for pressure beam - Adjustable clamp pressure - Machine bed fully equipped with air jets  - Year: 2009 - Documentation available: No - CE mark available: Yes - Serial number: Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Year of construction: 1981, Condition: ready for operation (used), A Pfeiffer parallel pendulum saw for the woodworking industry is available. Cutting height: 150mm, cutting width: 675mm, saw blade diameter: 500mm, machine length including roller conveyor: approx. 6800mm, roller conveyor width: 600mm, roller conveyor length left/right: 3000mm/1500mm. Including roller conveyor. On-site inspection is possible. Dcslip Djwftb Eo Imjg

Condition: excellent (used), Year of construction: 1996, Feeder, circular saw feeder for sliding table saws For cutting moldings, window scantlings, trimming ABS edges, etc. Attaches to the circular saw stop Dcoliowcyvwsp D Imog Motor 0.14 kW, 380 volts Two feed speeds: 13 + 16 m/min Integrated electric safety magnet system secures the feeder to the saw table with an electromagnet Quick adjustment of the workpiece height via handwheel Rubberized feed rollers slightly sawn, but still usable Max. workpiece height approx. 80 mm Minimum workpiece length approx. 200 mm Extraction connection Original paint, only slightly touched up CE mark With mobile wooden transport box The mounting rail is 41 x 21 mm, internal dimensions 31 x 11 mm, groove width 13 mm Adaptable to many sliding table saw manufacturers, but other adapter rails are also available Panhans Weight approx. 30 kg The machine can be demonstrated on-site by appointment. We only offer machines that are in stock and ready for demonstration; see "Other offers from this supplier."

Condition: excellent (used), Year of construction: 2008, Description of the device cutting length 4300mm cutting width 4300mm Dcjlov Dtm Hsip D Imjg cutting height 75mm unit speed 30m/min 4 air tables year of production 2008 left-hand panel main engine power 11 kW total power 13 kW

Condition: new, Robland Z 500 M sliding table saw Dcslipewcxc Ae D Imog Sliding carriage 420 x 3200 mm Cutting length 3500 mm Cast iron saw unit Max. saw blade 500 mm, max. 350 mm with scoring saw blade Scoring unit 120 x 20 mm Cutting height 90° 175 mm, 45° 120 mm 3 speeds on saw blade 3000/4000/5000 mm Cutting width between saw blade and Z4 parallel stop 1350 mm Cross table 1505 x 760 mm with telescope with miter stop and 2 folding stops Comfort pack on cross table with extendable workpiece roller Frame table with extendable support and degree grid index system with length compensation Protruding saw guard Manual height adjustment and saw blade tilt LED bar for Scoring unit Prepared for grooving cutter (max. 16 mm) Automatic star-delta switch Weight 890-1080 kg Motor 400 V, 7 kW, 9.5 HP Equipped with: Motor 9.2 kW, 3 x 400 V

Condition: used, Year of construction: 2007, Functionality: fully functional, cutting height (max.): 75 mm, cutting length (max.): 3,200 mm, power: 11 kW (14.96 HP), saw blade diameter: 300 mm, overall weight: 3,300 kg, total height: 2,000 mm, main saw diameter: 350 mm, space requirement length: 6,000 mm, workpiece length (max.): 3,100 mm, working height: 950 mm, type of motor: three-phase motor, space requirement width: 7,000 mm, The machine is in operation until 04.07.2024 Djlstw Sy Njip D Imecg

Condition: used, Raimann Profirip KM310 multi-rip circular saw for ripping and trimming boards with multiple circular saw blades including a solid roller conveyor. cutting width: 310 mm chain width: 340 mm engine: 36 kW cutting height: 75 mm saw shaft ø: 65 mm Djlijwctbtjp D Imjcg saws ø: Max. 300 mm Clearance height: 100 mm

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, Brand new SCM M3 type single-axis serial cutting machine for sale. Motor power: 18.5 KW Cutting width: 300 mm Cutting height: 120 mm Dcslipswff Nno D Imsg Can also be equipped with a 37 KW motor on request.

Condition: repair required (used), Functionality: not functional, saw band length: 8,800 mm, total height: 3,150 mm, total length: 4,300 mm, total width: 2,100 mm, cutting width (max.): 680 mm, net weight: 8,000 kg, Selling a Behringer HBP 650 band saw. The motor and the gear box of the saw are defective. Further technical data: 2 column-guided Chip conveyor Cutting range at 90 degrees: round 550 mm Cutting range at 90 degrees: flat 680 x 550 mm Cutting speed: 1 - 115 m/min Band saw blades included: 8x HM-V- special Dcelip Dsvn Hh Sj Imsg Dimensions: 8800 x 54 x 1.30 mm Toothing: 1.4-2 ZpZ, T 10 x HSS M42 Dimensions: 8800 x 54 x 1.6 mm Toothing: 0.75/1.25 K-POS 2x HSS BH Dimensions: 8800 x 54 x 1.6 mm Toothing: 0.75/1.25 K

Condition: excellent (used), GRAULE ZS135N pull saw - used - automatic brake ----- Technical specifications ----- Cutting height: 135 mm, Cutting length: 420 mm, Dolswcq Rlsip D Imecg Pivoting angles: 45-90-45°, Tilt angles: 45°, Motor: 3 kW Quality information: - Guides checked/adjusted - Complete basic inspection - Complete basic cleaning - Electrical system checked - Ready for immediate use

Condition: new, Functionality: fully functional, power: 18.02 kW (24.50 HP), Maximum precision and large cutting heights combined with fast feed rates – this is only possible with an uncompromisingly stable frame construction. This uncompromising quality is achieved by using a support with a proven tubular construction. The thick-walled steel tubes are welded together by our experienced employees over many hours of painstaking work to form a complex frame. This creates the solid foundation for the high-precision guides, over which the saw carriage, weighing several hundred kilograms, will later move. At 3200 x 3200 millimeters, it's the perfect machine size for your workshop The machine can process workpieces up to 3200 millimeters long and wide. This means the saw carriage can make cuts up to 3200 millimeters long. The material pusher can also be adjusted to a dimension of up to 3200 millimeters from the cutting line. Automatically adjustable cutting height up to 118 millimeters The powerful motor drives the saw blade through the material at a cutting height of up to 118 millimeters. For ideal cutting geometry, the saw blade should protrude approximately 10 millimeters above the workpiece. This optimizes energy consumption, noise emissions, and the saw blade's service life. This is a significant advantage for our machine users, and every machine is equipped with automatic cutting height adjustment as standard. The machine senses the height of the material to be cut and automatically adjusts the saw blade to the correct cutting height. Even when cutting multiple panels in a stack, the saw blade drive must not show any weaknesses. That's why we equip our saw with a powerful 18 kW (24.5 HP) motor on the main saw unit. Motorized, stepless cutting height control including grooving function Using a positioning drive, the entire saw unit can automatically raise or lower itself to a set height. This expands production diversity and ensures precise grooves. The settings are made directly via the operator terminal. Motor: 18.0 kW (24.5 HP) 3x400 V / 50 Hz Additional Equipment 14 Continuously variable speed control 2000-5000 rpm 95 Performance pneumatic clamping device 50-2100 mm 24 Dust package on the saw carriage for processing gypsum- and cement-based materials Djliewfdiyep D Imscg 30 Air cushion table 2300 x 600 mm (2 pieces) 28 Movable machine tables via linear guides and rollers 40 Number of package clamps in double-finger design, opening height 105 mm 41 Additional double-finger package clamp, opening height 105 mm 38 Automatic trimming via laser measurement 45 Additional double roller conveyor for sagging materials 44 24" touchscreen control system 90 Network connection preparation 86 Control cabinet in special position 700 Ardis module 1 710 Ardis module 2 714 Postprocessor 720 Ardis module 3 400 Helical rack for smoother operation 401A Saw carriage feed 0.2 m/min–60 m/min, return 80 m/min 403 Cutting length preselection via switch 404 Double pressure beam SL 3200 437 Technology database including controlled pressure regulation for pressure beam and package clamp 92 Transport preparation for crane unloading

Condition: excellent (used), Year of construction: 2015, F45 2015 Sliding Table Saw F45 ElmoDrive Eye-level operation Template holder Max. blade diameter 450 mm Motor 5.5 kW (7.5 HP) VARIO 3-axis scoring unit with tilting Double-sliding table with a carriage length of 3000 mm TPL 840 mm CNC angle stop UNO 90 CNC parallel stop 1000 mm Dcsliewcpuvop D Imsg Collet set (2 pcs.)

Condition: used, knife: HW WZ Z144 flight circle (ø): 500 mm drilling: 30 mm width: 3.5/4.8 mm Djlipowcpnps D Imecg material: steel

Condition: excellent (used), Year of construction: 1985, Costa Leopard Dcoliel Tf N Hsp D Imeg Cutting height: 160 mm Cutting width: 350 mm Engine power: 2 x 37 kW Weight: 4200 kg

Condition: used, Year of construction: 1986, Functionality: fully functional, USED, WELL-PRESERVED MARTIN T71 SLIDING CIRCULAR SAW WITHOUT PROTECTIVE HOOD FOR SALE! Dolip D Iewfcx Tomscg

Condition: excellent (used), HOLZ-HER SECTOR 1255 pro panel saw - used - Welded frame with extremely high rigidity, pneumatically adjustable sliding grid, stable locking of the saw carriage at the top and bottom, electrically monitored locking for vertical cutting, foldable plunge lever on the saw unit, retractable riving knife for cutouts, control panel at eye level, digital display on the longitudinal stop, digital display for horizontal cutting, lifting roller transport system, TRK extraction system, dust-tested, year of manufacture 2023 ----- Technical specifications ----- Cutting length: 4,300 mm, Cutting height: 2,200 mm, Trimming height: 2,110 mm, Cutting depth: 60 mm, Saw blade diameter: 250 mm, Motor: 4 kW, Extraction nozzle diameter: 120/100 mm, Compressed air: 6 bar, Space requirement (LxDxH): 5,500x1,600x3,000 mm, Weight: approx. 950 kg Quality information: Dcolijv I Dqwop D Imsg - Complete basic inspection - Complete basic cleaning - Electrical system checked - Ready for immediate use

Condition: new, Type MJ1412-40 Feed speed (inverter) 9-35 m/min. Spindle diameter 70 mm Diameter of sawblades 355-405 mm Cutting width 400 mm Dcolip Deitvfpo Imsg Cutting height 100/115 mm Min. cutting length 290/480 mm Motor power 37 kW Total power 42,1 kW Transport dimensions 3000x1300x1500 mm Weight 2000 kg Price 22450 Eur (EXW Jonava, Lithuania)

Condition: new, Holzkraft L invincibile si 3 BLADE OFF sliding table saw BLADE OFF safety system - exhibition machine- ----- Technical specifications ----- Supply voltage: 400 V, Mains frequency: 50 Hz, Scoring motor power: 1.3 kW, Drive motor power: 9.0 kW, Format sliding table length: 3200 mm, Format sliding table width: 360 mm, Table length: 1040 mm, Table width: 630 mm, Cutting width with parallel stop: 1500 mm, Max. cutting width to the left of the sawblade: 3200 mm, Trimming length: 3200 mm, Sawblade inclination: 90 - 45°, Max. cutting height 90° with 400 mm sawblade: 120 mm, Max. cutting height 45° With 400 mm saw blade: 89 mm, Saw blade speed: 3000 - 5000 rpm, Scoring saw blade diameter: 120 mm, Scoring saw blade speed: 8500 rpm, Length approx.: 7250 mm, Width/Depth approx.: 4460 mm, Height approx.: 1770 mm, Net weight approx.: 1307 kg, Extraction nozzle diameter: 100 and 120 mm The BLADE OFF system detects potential hazardous situations early and prevents them by retracting the saw blade into the machine table in a fraction of a second. With the help of sensors, the system is able to distinguish between the workpiece and the operator. An LED light in the saw blade guard indicates with a green light whether the safety system is active. Controlled via the 15" eye-S control console. Connection to the SCM Thundercut (optimizer/sequence control app) is possible. Three longitudinal stops with integrated digital displays. Electrically adjustable parallel stop. Start/stop buttons for the main and scoring saw blades integrated in the sliding carriage. Special guides and an innovative curved grinding system enable the edger carriage to have a fourfold higher load capacity. Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminum sliding table On/off switch on the sliding table Dolipev Nhg Ss D Imocg for the main and scoring sawblade motors Trimming frame with angle-adjustable aluminum telescopic stop Material roll on the trimming frame Motorized saw parallel stop via control panel Three longitudinal stops with integrated digital displays Eccentric clamp Control of sawblade height, tilt, and parallel stop Pivoting control panel on top Table extension Table extension Sawblade pendulum protection - new exhibition machine -