Condition: new, pressure: 100 toStroke/min: 50table clamping area: 900 x 700tappet measurements: 500 x 350Stroke adjustment: 20 - 130Tappet adjustment: 100daylight: 400EEP-PK100 ECCENTRIC PRESS- Pneumatic coupling & brake combination - Hydraulic overload protection ( ¤2,800 due to the large working area, it is recommended )  - Capacity: 100 tons   - stroke/min. : 50 spm  - Table: 900 x 700 mm  - Pestle: 500 x 350 mm  - Stroke adjustment: 20 – 130 mm  - Plunger adjustment: 100 mm  - Installation height: 400 mm Accesories : - Stroke adjustment  - Min/stroke setting  - Automatic central lubrication  - Security PLC: PILZ or SIEMENS  - Two-channel fuse control cabinet  - Light barrier: SICK, PILZ or LEUZE,  - Cat 4. CE. system  Dkebvev Hin Ejm Ih Ejl - 2 pieces. Fracture plates  - Bottom support plate for transport  - Underreach protection

Year of construction: 1997, Condition: ready for operation (used), Ross force 63 ton press Dksbvm Ihjv Sc I No Esl

Year of construction: 1998, Condition: ready for operation (used), A Hymag hydraulic press is available. Pressing force: 15t, pressing pressure: 235bar, stroke: 250mm, drive: V30 D045, motor power: 7.5kW, oil requirement: 200l, run-on time: 40ms, safety distance: 80mm. The machine has a leak on the piston and the position measuring system is not working properly. Documentation available. On-site inspection is possible. Dsbvmov Scrnj Ih Eskl

Condition: new, Clutch-brake series УВ 31… for presses type КД2324, КД2124, КД2324К, КД2124К, КД2324Е, КД2124Е, КД2128, КД2328, КД2128К, КД2328К, КД2128Е, КД2328Е, КД2126, КД2326, КД2126К, КД2326К, КД2126Е, КД2326Е, H-3222A, HA-3223, HA-3225, H-475, H-481, H-483. Djbev Saxrjvm Ih Eekl The offered brake is new and has 100% confirmed correctness and efficiency of operation. It is also possible to purchase spare parts such as brake discs, friction linings, bushings, body pins, flywheel pins, springs and a set of seals. We offer clutch-brake type: YB3132, YB3135, YB3138, YB3141, YB3144, YB3146 for various guillotines and presses of former USSR origin. The weight of the complete clutch - depending on the specific type - ranges from 200-300 kg. Our offer also includes other parts and accessories for metalworking machines of Russian production (former USSR).

Condition: used, Year of construction: 1997, Press capacity: 315 ton Ram stroke adjustable: 30 - 100 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Table surface area : 1600 x 1100 mm Slide area: 1600 x 1100 mm Hole in table: 600 x 180 mm Number of strokes: 15 - 180 s.p.m. Table height over floor: 1200 mm Required power: 170 kW Height over floor approx.: 4900 mm Dimensions L x W x H: 4900 x 1900 x 4900 mm Weight of machine approx.: 55 ton Dksbsuqd Tmjvm Ih Ejl Standard configuration The press was converted to CE standard in press was converted to a SIEMENS S7 control conveyor system still has a SIEMENS S5 control system. Extended machine accessories Die lifters in the table Automation Feeding unit KEMMERICH consisting ofDecoiler levelling machine roll feeder Coil loading car

Condition: new, pressing force: 100 t, distance between stands: 1,500 mm, cylinder stroke: 400 mm, - Capacity 100 tons - Cylinder stroke 400 mm - Working width 1500 mm - Cylinder is movable Dkebvjru Dirom Ih Eol - pressure gauge - Emergency stop - 400V

Condition: refurbished (used), Year of construction: 1999, Functionality: fully functional, Equipment: second-hand vehicle warranty, TECHNICAL CHARACTERISTICS: Press Model: T40 CE Year of construction: 1999 Nominal force: kN 400 Nominal stroke: mm 2.6 Debjv R S Uvovm Ih Ejkl Adjustable stroke: mm 8÷78 Stop position: TDC Ram adjustment: mm 60 Stop time: ms 110 Safety distance (1.6 m/s): mm 177 Strokes per minute: N° 145 Max. insertions per minute: N° 55 Max. surface mould: mm 300x500 Max. Height of closed mould: mm 332 Min. Height of closed mould: mm 297 Upper mould mass: Kg. 40 Installed power: KW 3.05 Voltage: V 400 Auxiliary voltage: V 24 Operating air pressure: BAR 5.5÷6 Mass: Kg. 1,950 Complete with user manual and CE conformity Six (6) month warranty on mechanical parts Twelve (12) month warranty on the electrical panel NEW COMPONENTS INSTALLED: • Electrical panel; • Pedals; • Motor bearings; • Flywheel bearings; • Swivel joint bearings; • Motor pulley; • Air regulator; • Overload disk; • Reinforced surface on CNC machine

Condition: good (used), Year of construction: 2002, total height: 2,200 mm, overall weight: 2,000 kg, total width: 1,250 mm, working width: 165 mm, total length: 1,400 mm, pressing force: 25 t, cylinder stroke: 135 mm, piston rod diameter: 90 mm, pressure: 300 bar, piston diameter: 105 mm, inner dimension width: 145 mm, cylinder diameter: 105 mm, DR. Fritsch CSP 100 Compact Sintering Press Machine Type: Sintering Press Year: 2002 (Installed in 2004) Condition: Very Good (Decommissioned) Includes Dksbvm Isv R E N Hoh Esl Manual Description For pressure sintering of metal bonds, ceramic bonds and synthetic resins Main features: Entry-level sintering press Precise control of sintering parameters (temperature, pressure, time). Flexibility: Shortest cycle times due to direct heating of the mould (typical sintering time depending on product: 15 - 45 min). Can also be used for the smallest sintering surfaces. Low graphite costs: Closed inert gas device. Simple operation: Touch-screen control panel. Variable input of pressing parameters via hydraulic pressure (bar). Programmable control with the option of saving complete sintering programs Easy maintenance due to good accessibility of the main components. Technical Specification Pressing force - normal switching: 26– 255 kN Effective pressing area of cyl.: 86,6 cm² Oil pressure: 30 – 300 bar (3,0 – 30 MPa) Graphite electrodes dimensions (WxDxH): 165 x 145 x 40 mm Internal Dimensions: 390x370x360mm Max./min. opening height: 150 / 15 mm Cylinders: 1 Cylinder Diameter: 105mm Cylinder Stroke: 135mm Piston Rod Diameter: 90mm Specific resistance: 12 – 14 µΩm Temperature control (single-channel) thermocouple Ni-Cr-Ni: 0 – 1.200 °C Total electric power: approx. 81 kVA Max. heating power: 79 kVA Supply voltage: 3 x 400 V, 50/60 Hz Total electric load: 3 x 120 A Cooling water consumption: approx. 90 l/min (at 20 °C) Recommended water supply temperature: 15 – 25 °C Water pressure: 2 – 4 bar Differential pressure (supply – discharge): 1 – 2 bar Inert gas consumption: approx. 500 l/h Inert gas pressure: 1 bar Inert gas types: nitrogen, forming gas (max. 5 % H2), noble gas Dimensions: 1400x1250x2200mm Weight: 2000kg

Condition: good (used), Functionality: fully functional, total height: 2,650 mm, total width: 950 mm, total length: 1,900 mm, pressing force: 160 t, table width: 800 mm, table length: 700 mm, operating speed: 20 mm/s, overall weight: 6,900 kg, reverse speed: 63 mm/s, ram plate width: 400 mm, ram plate length: 400 mm, ram stroke: 500 mm, type of input current: three-phase, clearance between the columns: 630 mm, retraction force: 40 t, Hydraulic press PYE 160 x 355. Manufacturer VEB Wema Zeulenroda (Germany). Parameters: Maximum pressing force 160 tons. Return stroke force 40 tons. Working pressure 12.5 MPa. Upper table 400 x 400 mm. Lower table 800 x 700 mm. Clearance 630 mm. Cylinder stroke 500 mm. Down speed 20 mm/sec. Up speed 63 mm/sec. Dksbvmev Rx R Ds Ih Eel Power requirement 7.5 kW. Weight 7000 kg. Height 2650 mm, Length 1900 mm, Width 950 mm. The machine has a new piston sealing package. It is possible to inspect and check the machine in motion.

Year of construction: 2023, Condition: new, Electro-hydraulic press OMCN 100 Ton Mod. 164/R Made in Italy DOUBLE SPEED ELECTRO-HYDRAULIC PRESS AUTOMATIC, COMPLETE WITH MANOMETER Hydraulic press with rapid motor with pressure gauge and double hydraulic power pack speed obtained with vane pump for fast approach and return and Dkjbvm Ijfh R Nysh Eol with axial piston pump for the working phase. Equipped with calibration and three-position control valve (neutral return). The machine is complete with oil. Equipped with winch for lifting the worktop. The stem is made of special steel, treated and chromed. The machine is equipped with bimanual control and simultaneity as from regulations in force. Complete with protective panels, rear and side panels. CE approval complete with electromagnetic compatibility. Piston stroke : mm 310 Interior light : mm 1,010

Condition: good (used), Type BV 25/ P (with extendable lower table) Technical data: Closing force 18 tons Opening force 20 tons Lifting speed adjustable approx. 0 - 1 m/min . . Extendable table size 800 x 660 mm Dkebvm Iev Eybysh Ejl Upper part pivotable .

Condition: new, - Cylinder stroke 400 mm - Working width 1200 x 450 mm - Cylinder is movable - Pressure gauge Debvm Iegg Nygjh Eokl - With V-blocks - Emergency stop - Weight 2250 kg - Motor power 7.5 kVA - Documentation - 400 V

Condition: used, pressure 160 t throat 360 mm Dsbvm Iev Rgwxoh Ejkl stroke 500 mm feed down 200 mm/sec feed up 125 mm/sec max. distance table - ram 1000 mm total power requirement 17 kW weight of the machine ca. 7 t

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, total height: 2,300 mm, installation height: 400 mm, total width: 1,620 mm, total length: 2,240 mm, pressing force: 61 t, table width: 450 mm, table length: 450 mm, overall weight: 3,800 kg, ram plate width: 160 mm, ram plate length: 160 mm, ram stroke: 150 mm, type of input current: three-phase, stroke distance: 150 mm, input voltage: 400 V, Equipment: documentation/manual, DR. Fritsch DSP 515 Pressure Sintering Press Machine Type: Pressure Sintering Press Year: 2008 Condition: Very Good. Decommissioned Includes Manual Technical Specification Main Cylinders: 1 Cylinder Diameter: 160mm Cylinder Stroke: 150mm Piston Rod Diameter: 140mm Effective Pressing Surface: 201.1cm2 Auto Pressure Control: 60-603kN Internal Dimensions: 450 x 450 x 400mm Self Baking Electrodes Dimensions: 180 x 180 x 60mm Inner Width of Electrodes: 145mm Temperature Range: 0-1,100 Deg C Sintering Mould Height: 60-120mm Sintering Surface: 150cm2 Total Connected Load: 155kVA Total Supply Voltage: 3 x 400V 50/60cps Total Nominal Current: 3 x 224A Operating Voltage: 3 x 400V 50/60cps/ 1 x 230V 50/60cps Control Voltage: 24V DC Dkjbvm Iev Rz Ifeh Eol Cooling Water Consumption: 120-150L/min Water Quality: Drinking Water Recommended Water Supply Temp: 15 - 25 Deg C Water Pressure: 2-4 Bar Differential Pressure: 1-2 Bar Compressed Air Consumption: Approx. 20L/min Air Pressure: 4-6 Bar Protective Gas Consumption: Approx. 300-1000L/h Gas Pressure: 1-5 Bar Dimensions: 2240x1620x2300mm Weight: 3800kg

Condition: new, Year of construction: 2025, Functionality: fully functional, Machine Model:HMG-200JM1815 1:Servo hydraulic motor 2:Magnetic table Specification: Clamping force: 2000KN Table size:1800*1500mm Maximum mold weight:20000 Kg Debvmsug T Rxe Ih Eokl Machine weight:32000kg Machine size:6200*2750*5800mm

Year of construction: 2012, Condition: ready for operation (used), A Sahinler workshop press is available. Press pressure: 150t, max. pressure: 244bar, working width: 1520mm, piston stroke: 300mm, ram dimensions X/Y: 200mm/1520mm, through hole: 100mm, table dimensions X/Y: 600mm/1520mm, max. installation height: 610mm. Forward speed: 9mm/s, retraction speed: 10mm/s, working speed: 5mm/s, drive power: 11kW. Machine dimensions X/Y/Z: approx. 2500mm/1000mm/2400mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible. Dksbvm Ihov N I Agj Esl

Condition: ready for operation (used), Year of construction: 1958, Functionality: fully functional, machine/vehicle number: 52/58, ram adjustment: 140 mm, pressing force: 250 t, ram stroke: 190 mm, plate thickness: 24 mm, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Dkebvmev N Iqdo Ih Esl Press force: 250 t Max. sheet thickness: 24 mm Stroke rate: 30/min Ram stroke: 40 - 190 mm Ram adjustment: 140 - 65 mm Further information according to the manufacturer - without guarantee Table: 850 x 800 mm Ram: 600 x 520 mm Dimensions: 1,270 x 2,920 x 3,000 mm

Condition: new, overall weight: 1,000 kg, pressing force: 100 t, cylinder stroke: 400 mm, clearance between the columns: 1,010 mm, - Capacity 100 tons - Cylinder stroke 400 mm Dkobjr Ei Szovm Ih Esl - Working width 1010 mm - Electrically or manually operated - pressure gauge - Emergency stop - 400V

Condition: used, Year of construction: 1995, pressure 100 t throat 300 mm stroke 10 - 100 mm no. of strokes 100 Hub/min ram adjustment 60 mm daylight, max. stroke above - ram adjustment above 490 mm table surface area 900 x 600 mm hole in the table 300 x 200 mm T-slots 4 Dksbvm Ihjv Rgwre Esl T-slot - width 22 mm ram surface 440 x 235 mm tool shank hole (depth x diameter) 85 x 50 mm total power requirement 5,5 kW weight of the machine ca. 5,8 t dimensions of the machine ca. BxTxH 2,2 x 1,65 x 2,6 m - Fixed table - Breaking plate - Hand lever grease lubrication - Ratchet for ram adjustment - CE

Condition: new, Offered is a new ELBA hoist bucket, Dkebvm Iev N H I Ush Esl with rope and brake. 1 m³, track width 2.08 m.

Condition: new, Year of construction: 2025, Table size 1200x1000mm Pedal rotates up to 180 degrees Table extends up to 1000 mm Table can be rotated 180 degrees around its axis Djbvmev N D Ncs Ih Eokl Table can be raised up to 75 degrees Downward speed 1-10 mm sec. Upward speed 25 mm sec. Maximum open height 1300 mm Stroke 800 mm Table moves at 30 mm/second Weight 11.5 t Height 3000 mm Width 2900 mm SIEMENS S 7 1200 Complete hydraulics from BOSCH REXROTH Complete control cabinet technology from SIEMENS Manufactured under German supervision in Brazil, CE compliant

Year of construction: 1979, Condition: ready for operation (used), Pressing force: 110t, working length: 3000mm, stand distance: 2500mm, throat depth: 250mm, stroke: 100mm, installation height: 350mm, table height: 900mm, table width: 200mm, power: 11kW, weight: approx. 8500kg, operating hours: 89610h. On-site inspection is possible. Dkebov N I Aasvm Ih Eol

Condition: ready for operation (used), Year of construction: 1980, Functionality: fully functional, machine/vehicle number: 2637, pressing force: 160 t, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Pressing force: 1,600 kN Motor power: 4 kW Safety distance: 110 mm Overtravel: 13 mm Lubrication system: Available Manufacturer: Eckardt Operation: Two-hand operation Leveling machine Manufacturer: Kohler Type: HVZ3/350 Serial number: 100014 Year of manufacture: 1981 Roller conveyors Number: 2 Dimensions: 300 x 2,000 mm Further information according to the manufacturer - without guarantee Pressure capacity: approx. 160 t Column width: 850 mm Ram surface: 800 x 700 mm Stroke: 400 mm Ejector stroke: 300 mm Table surface: 800 x 700 mm Dkebov N Ifbovm Ih Ejl Dimensions W x D x H: 1,800 x 1,800 x 4,200 mm Weight: approx. 12 t

Condition: good (used), 4 x eccentric press Ebu / Weingarten consisting of the following types: 1 x Ebu 15 1 x Ebu 25 Djbvm Ieq Rdr Tjh Eokl 2 x Ebu 35 1 x Weingarten A 40 The machines can be inspected on site.

Condition: used, Technical details: pressure: 63 t throat: 315 mm ram adjustment: 60 mm adjustment of stroke: 70 mm ram stroke: 10 - 105 mm no. of strokes: 71 - 140 Hub/min strokes per minute: Einzelhub: 45 / 50 Hub/min. passage between the side columns: 355 mm dayligth: 335 mm table:: BxT: 800 x 630 mm passage opening in table: 400 x 130 mm Dksbvsvt Nvpsm Ih Eol clamping plate: BxT: 616 x 85 mm clamping surface ram: BxT: 450 x 280 mm mortise hole in ram: Ø 50 x 83mm mm total power requirement: 7,5 kW weight of the machine ca.: 5,9 t dimensions electric cabinet LxWxH: 0,86 x 0,30 x 1.3 m dimension machine xH: Presse: 1,42 x 1,8 x 2,6 m Press with roll feed/strip system and straightener High-performance press with roll feed/strip system and straightening machine Application: suitable for series production Equipped with servo roll feed MINI: refurbished until 01/2021 -manufacturer P/A GmbH, type SRF 220 -for strip width 220mm -feed rate 150m/min. -operation with hand tool straightening system: -manufacturer Wanzke, type KS 150 -insertion width max. 200mm -2 pieces driven inserting rolls -4 pieces driven straightening rolls (top), adjustable vertical approx. 30mm -5 pieces driven straightening rolls (bottom), fixed, not adjustable Coil = special design: -mechanical/manual -external take-up max. Ø 1.500mm -internal take-up max. Ø 300mm -width max. 200mm Roller deposit: -roller system with 9 pieces of roller bars with 53 rollers (Ø 25x25mm). *