Used Inos for sale (134)

Year of construction: 2012, condition: good (used), Item: inos iSENS laser sensors with control unit, cable, and PC interface Condition: used Scope of delivery: (See image) Njdezdn T Rjpfx Alnjcu (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2017, functionality: fully functional, overall weight: 8,500 kg, fuel: diesel, feed length X-axis: 6,000 mm, cutting length (max.): 1,100 mm, Equipment: front-end loader, trailer coupling, Pinosa CPE 1200 Semi Automatic Firewood Processing Machine Machine Type: Firewood Processing Machine Year: 2017 Condition: Very Good, has had very little use. Powered By: 3 Phase, Diesel Generator or PTO. Includes FG Wilson P110 110kVA Diesel Generator Feeding Deck Extraction Conveyor with Sieve and Cyclone for Sawdust Machine Description This is a mobile, self-contained wood cutting and splitting machine. It allows you to saw and split sizes of wood from 50 to 480mm diameter, while being movable. The machine can thus be transported on a truck, then installed on demand autonomously using 4 jacks. It is therefore suitable for both the service provision market and for on-site production. Finally, note that it only requires a single operator to produce up to 16T of firewood per hour . Technical Specifications Blade Diameter: 1200mm Max Length of Tree Trunk: 6000mm Min Length of Tree Truck: 800mm Max Diameter of Tree Trunk: 480mm Min Diameter of Tree Trunk: 50mm Max Cut Off Length: 1100mm Min Cut Off Length: 200mm Splitting Possibilities: 2-4-6-8-10-12-14-16 Nsdjvbdyxspfx Alnscu Splitting Cylinder Power: 35T Max Hourly Throughput: 16T/H Power Connection Options: Electric Motor/Electric Generator/PTO Motor Power: 37kW Machine Weight: 8500kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2025, Horizontal thin-cut band saw 400 mm working width New 2024 model with bigger wheels and inverters on wheels. Touchscreen Schneider, PLC and Inverters Schneider Germany 22.0 KW saw motor Bigger wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm Ncedpfx Aloy Dpn Ejneu

Condition: like new (used), Year of construction: 2025, Horizontal thin-cut band saw with 3 heads 300 mm working width With 3 cutting heads, to make max 4 slats in one run New 2025 model with bigger wheels and inverters on wheels. Touchscreen Schneider, PLC and Inverters Schneider Germany 970mm wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm * same as new * Ncjdsvwbg Ujpfx Alnou

Condition: like new (used), Year of construction: 2025, Flexible horizontal band resaw with tiltable conveyor Modern resaw with impressive features : Cast iron dynamicly balanced wheels Hydraulic blade tension Inverter controlled feed system Automatic pressurised lubrication system with reservoir tank External control panel 22.0 KW motor - latest IE-3 energy efficient motor Tilting conveyor up to 45 degrees * very suitable for shiplap cladding, wall cladding * Maximum material size (W X H): 300mm x 300mm Ncedpfxsydk Hne Alneu Feed speed (variable): 0~18 m/min same as new

Condition: excellent (used), Year of construction: 2019, operating hours: 29,081 h, functionality: fully functional, CNC control HEIDENHAIN TNC 640, 15" Main computer MC Controller unit CC Keyboard TE 15" TFT color flat screen with softkeys RAM: 4 GB Hard disk: 32 GB, of which at least 21 GB program memory Input resolution / display increment linear axes: up to 0.1 µm Input resolution / display increment rotary axes: up to 0.0001° Input range: max. 99,999.9999 mm or 99,999.9999° Circular interpolation in 3 axes with tilted machining plane Helical interpolation Linear interpolation in 5 axes Block processing time: 0.5 ms Ethernet: 2 x 1000BaseT USB: 1 x front USB 2.0, 4 x rear USB 3.0 Handwheel HEIDENHAIN HR510 Axis selection via buttons / softkeys Buttons for continuous axis movement Emergency stop button Magnetic attachment Enable buttons / dead man's buttons according to CE Travel ranges X-axis / longitudinal axis: 4,000 mm Y-axis / transverse axis: 2,500 mm Z-axis / vertical axis: 1,300 mm Feed / connection / pneumatics Max. feed rate interpolating axes: 40 m/min Installed power: 60 kVA Max. power consumption: 150 A Air requirement pneumatics: 400 Nl/min Working pressure pneumatics: 6 bar Machine table / floor plate Machine table recessed, with leveling units Table size: 2,500 x 4,000 mm Table height: 300 mm Load capacity: 10 t/m² T-slot width: 28 H12 mm T-slot spacing: 250 mm Milling head / universal milling head Universal milling head with continuous movement in 2 axes 5-axis machining Direct drives for rotary axes Rotary axes as interpolated CNC axes Automatic tool clamping Undercut machining up to 10° possible Integrated cooling of the torque motors and spindle bearings C-axis swivel range: +/- 270° A-axis swivel range: +/- 185° Max. speed A/C axes: 30 rpm Working torque A/C axes: 450 Nm Clamping torque axes: 1,400 Nm Positioning accuracy A/C axes: 8 arcsec Positioning repeatability A/C axes: 4 arcsec Main spindle Spindle power S1 / S6: 22 / 33 kW Spindle torque S1 / S6: 84 / 128 Nm Max. spindle speed: 18,000 rpm Constant power: 2,500 - 18,000 rpm Constant torque: 10 - 2,500 rpm Tool holder: HSK-A63 DIN 69893 Rigid tapping for electric spindle Software / calibration Dynamic RTCP software AUTOCAL software for automatic calibration 3D Form Inspect M&H software Software for measuring 3D shapes, tools, molds and dies Measurement program creation directly via coordinate points / surface points Vibration / collision monitoring Sensor for detecting vibrations Detection of collisions and excessive vibrations on 3 axes Reaction time approx. 1 ms Electronic interface for functional testing Nedoyrndmepfx Alnocu Tool changer Tool changer with arm for tool changes Overlapped-wheel design Full enclosure for operator safety Tool positions: 80 Max. tool diameter: 75 mm Max. tool diameter with free adjacent positions: 125 mm Max. tool weight: 10 kg Max. tool length: 600 mm for 40 tools Max. tool length: 250 mm for 40 tools Tool type: HSK-A63 DIN 69893

Condition: used, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,550 mm, loading space height: 2,000 mm, loading space volume: 45 m³, suspension: air, tire size: 385/65 r22,5, color: light grey, NEW TECNOKAR DELFINO SL 9000 ALUMINUM DUMP TRAILER, AVAILABLE FOR IMMEDIATE DELIVERY; CARGO SPACE DIMENSIONS: L 9000 MM X W 2500 MM X H 2000 MM; WHEELBASE: 4650 MM; TIRES: 385/65 R22.5; DISC BRAKES; AIR SUSPENSION; FIRST AXLE LIFTABLE; Nedpfx Alehk Uzcjnecu THIRD AXLE STEERABLE; TANK CAPACITY: 45.5 CUBIC METERS; EBS; ELECTRIC TARPAULIN SYSTEM; JOST LANDING GEAR; HALDEX HYDRAULIC SYSTEM.

Condition: used, machine/vehicle number: 009203, empty load weight: 7,000 kg, overall weight: 31,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,500 mm, loading space height: 2,000 mm, loading space volume: 53 m³, suspension: air, tire size: 385/65 r22,5, color: light grey, Year of construction: 2021, TECNOKAR T3SP38 / DELFINO rear tipping semi-trailer, new and available for immediate delivery; Cargo space dimensions: L 10500 mm x W 2500 mm x H 2000 mm; Wheelbase: 5800 mm; Payload: 31000 kg; GVWR: 38000 kg; Tires: 385/65 R22.5; Disc brakes; Air suspension; Liftable first axle; Steering third axle; Tank capacity: 53 cubic meters; EBS; Electric tarpaulin; Njdpfx Alshc Sfronocu JOST landing gear.

Condition: good (used), “Rentec Dinosaurus 2600S” for Sale Nodovt Tptepfx Alnecu Manufacturer: Rentec Type: Dinosaurus 2600 S Included Hydraulic-unit and control-unit build in container. With overhauled rotors. Also outlet conveyor in stock which fits to the Rentec Dinosaurs 2600S. See PDF-file below for more detailed information.

Condition: used, Year of construction: 2016, Makino A51NX in very good condition, including a new ATC tool changer and Cubes. Approx. 11,000 hours of cutting time. Capacity & Travels: Pallet Size: 400 × 400 mm X-Axis Travel: 560 mm Y & Z-Axis Travel: 640 mm Max. Workpiece: ∅ 630 mm × 900 mm Max. Payload Capacity: 400 kg Spindle: Spindle Speed: 15,000 RPM Spindle Taper: HSK-A63 Motion & Feed Rates: Rapid Traverse Rate: 60,000 mm/min (1,968 ipm) Cutting Feedrate: 50,000 mm/min Axis Acceleration: 1G B-Axis Indexing: Full 4th axis, Direct Drive (0.001-degree increments) Tooling: Ncjdpfjzg N E Hjx Alneu ATC (Automatic Tool Changer) Capacity: 60 tools Tool-to-Tool Time: 0.9 seconds Max. Tool Diameter / Weight: 170 mm / 12 kg 04003 HSK-A63 Spindle – Replaces the standard ISO50 interface. Features a double taper, full face contact, and hollow shank interface. Tool clamping force is higher than 44kN; HSK tool holders are required. 14017 HSK holders for 60 Tool ATC 26001 Moire Scale Feedback X, Y, Z-Axis Increments 0.05µm, positioning tolerance Tp = 0.006mm (ISO 230-2). 29006 Through Spindle Coolant 3.0MPa – Provides TSC flow of 30 l/min at 3.0MPa, replacing the standard 1.5MPa. Air through the spindle is possible. The pressure data refers to the output flange of the pump. 29009 Flow Switch for Through Spindle Coolant – Monitors through-spindle coolant flow. The machine will feed hold if the flow is below a preset level. Note: Recommended option for filtration systems to prevent tool damage. 31002 Air curtain for splash guard window – Located in the middle of the operator-side window, this air curtain prevents chips and coolant from obstructing the view. 37000 Broken tool sensor outside machining area (BTS) – Tool breakage detection for centric tools (tool diameter 1-40mm, tool length 65 - 430mm). Length measurement is performed using a movable probe. The measurement takes place in the ready position for a tool change, outside the machining area. Accuracy ± 2mm. If there is a difference between the measurement before and after machining, an alarm is triggered automatically. 37101L Automatic Workpiece Measuring Device (RENISHAW OMP60) – Three-coordinate measuring probe from RENISHAW with automatic coordinate correction. The signal is transmitted via infrared. Tolerance approx. 0.005mm. 14 automatic measurement cycles are available as pre-programmed cycles in the program memory. Note: requires 13m. Control Options: 60001 Automatic Corner Override (G62) – Automatically decelerates the cutter at a corner depending on the corner angle, in order to maintain the cutting rate per unit time. 62007 Run hour and parts quantity display. 63034 DATA CENTER Storage Type B (total: 800MB) – Communication card with internal 800MB removable flash RAM card used for storing and executing NC data (of subprograms) for high-speed, high-definition finishing and supporting SGI capabilities. CNC programs can be transferred to and from a CAD/CAM system from the operator's pendant by FTP get and put commands over an Ethernet cable. 66003 Additional 48 Work Offsets (G54.1 P1-P48) – Allows for 48 work coordinate systems, simplifying multiple part fixtures. 68010 600 Macro Common Variables – Variable numbers 100-199 are reset and cleared when the power is turned off, while 500-999 are permanent. Pallet Size: 400 × 400 mm X-Axis Travel: 560 mm Y & Z-Axis Travel: 640 mm Max. Payload Capacity: 400 kg Spindle Speed: 15,000 RPM Spindle Taper: HSK-A63 Rapid Traverse Rate: 60,000 mm/min (1,968 ipm) Cut...

Condition: used, Used approximately 13,400 litre Inox-Maurer AG stainless steel reactor body. Unit has an approximately 770 litre external coil. Unit is rated 2.0 / -1bar internal operating at 200degC. External coil is rated 16.0bar operating at 200degC. Unit has an internal material of construction of 1.4435 and external coil of 1.4306. Ncodpfx Asy Ryrnolnou Specifications: Capacity: 13,400 L

Condition: used, Year of construction: 2010, Overview This wirehooder was manufactured in 2010 by Robino & Galandrino. The RECORD 14000 is designed for the application of wire hoods on bottles. The machine was in production until the end of March 2026 and is in working condition. The machine has been inspected, cleaned, and lubricated. Technical data  Capacity: up to 14,000 bottles/hour Application: Wire hood application Configuration: RECORD 14000 Utilities: 400 V / 3F / 50 Hz / ICC 20 A / IN 4.15 A Njdpjzdb Ensfx Alnscu

Condition: excellent (used), AISI 316 stainless steel tank for storing food products, cosmetics, or chemicals. Ncjdozc N Stjpfx Alnju Features: Capacity: 10,000 liters (10 m³) Material: AISI 316 stainless steel Vertical construction Top manway Bottom outlet Side level indicator Sloped bottom for emptying Overall condition: good Dimensions: Diameter: 2,100 mm Total height: 3,300 mm Equipment available for inspection. Loading possible at our facilities. 3 units available. Price per unit.

Condition: ready for operation (used), Year of construction: 2012, stroke length: 250 mm, Mechanical stamping press manufactured in 2012. This Colombo Agostino T231A315 features a nominal press capacity of 315 tons and a slide stroke of 250 mm. It includes a motorized slide adjustment of 315 mm and a bed dimension of 1120 mm x 960 mm. If you are looking to get high-quality stamping capabilities, consider the Colombo Agostino T231A315 machine we have for sale. Contact us for further details. • Main motor power: 32 kW • Stroke speed (min - max): 15 - 30 strokes/min • Slide stroke (working travel): 250 mm • Slide (ram) adjustment: 315 mm (motorized) • Shut height (max. closed die height): 650 mm • Shut height (min. closed die height): 335 mm (max. shut height minus slide adjustment) • Bed (bolster plate) dimensions: 1120 mm x 960 mm • Slide (ram) face dimensions: 1120 mm x 960 mm • Bottom cushion stroke (max): 160 mm (integrated) • Slide guidance: Precision guided ram system Njdpfx Aozcywajlnjcu • Bed configuration: Fully machined bolster plate • Lubrication: Centralized automatic lubrication system Additional equipment • Feeding system: Coil/feeding line included • Optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: like new (used), 3 units Length: 210 cm x 80 cm Height: 115 cm - 105 cm 3 units Length: 190 cm x 80 cm Nsdpfszd Sr Dox Alnocu Height: 115 cm x 105 cm The stated price is per unit. Please see my other listings.

Condition: used, Year of construction: 1994, machine/vehicle number: GA23, Used ROBINO & GALANDRINOwirehooder 6000 BPHTechnical Specifications & Performance DataThis automatic wirehooder is engineered for reliable wire cage application on bottles, ensuring consistent tightening and alignment at production speeds suitable for medium-scale beverage production. Manufactured by Robino & Galandrino, the REKORD 10/2 configuration combines a rotary handling system with a long-duration magazine and ground-level loading to minimize downtime during continuous operation. This second hand unit is a strong addition to any used bottling line focused on premium products and industrial packaging efficiency.Manufacturer: Robino & GalandrinoModel: REKORD 10/2Year: 1994Machine type: Automatic wirehooder (wire cage applicator)Production speed: up to 6,000 bphConfiguration: 10 platesWirehood application: Muselet/wire cage applicationMagazine: Long-duration, high-capacityLoading: Ground-level cage loading for uninterrupted replenishmentBottle format compatibility: 1.5LAdvanced Automation & Control SystemsThe REKORD 10/2 platform is designed for dependable, automated performance with straightforward operator controls. The long-duration magazine and ground-level loading streamline replenishment, reducing stops and improving overall equipment effectiveness. Typical safety interlocks and guarding protect operators while allowing efficient access for adjustments and cleaning.Automated wire cage feed and applicationOperator-friendly controls and status indicationSafety guarding with interlocked access pointsQuick replenishment via ground-level magazine loadingProduction Line Integration CapabilitiesThis wirehooder integrates seamlessly into existing bottling equipment layouts, positioned downstream of corking and upstream of labeling or inspection as required. It supports inline operation with synchronized conveyors or can function as a standalone station with appropriate infeed and outfeed controls.Inline or standalone operation modesCompatible with upstream corkers and downstream labeling/inspectionFormat handling for 1.5L bottles; additional formats can be engineeredSuitable for integration within broader beverage production and industrial packaging linesMachine Condition & Maintenance HistoryThis second hand wirehooder is presented in working condition and ready for operation, providing a practical solution for producers seeking reliable bottling equipment with controlled capital investment.Operational status: Ready for operationPre-owned equipment from established engineeringOperational Performance & VersatilityThe REKORD 10/2 is built to deliver consistent wire cage application at up to 3,000 bottles per hour, supported by a 10-plate rotary handling system. The long-duration magazine and ground-level loading reduce changeover interruptions, supporting steady throughput in used bottling... Nodpfxjzcf I Dj Alnjcu

Condition: used, Length: 400 cm Ncjdpfxozdvp Hj Alnsu Belt width: 60 cm Side guard height: 10 cm Overall height: 24 cm Drum diameter: 10 cm Belt for food processing Stainless steel Manufacturer: Haith We offer a wide selection of conveyors; inquire about the size you need. Please check out my other listings.

Condition: used, Length: 315 cm Belt width: 45 cm Side guard height: 8 cm Overall height: 38 cm Ncedpfx Aezdvptelnsu Drum diameter: 11 cm Belt suitable for food processing Acid-resistant steel Manufacturer: Haith We offer a wide selection; inquire about your desired size. Please see my other listings.

Condition: used, Length: 560 cm Belt width: 56 cm Distance between scrapers: 25 cm Height of scrapers: 5 cm Height of side rails: 10 cm Overall height: 28 cm Belt suitable for food products Stainless steel Manufacturer: Htech Nedjzdvpaspfx Alnscu We offer a wide selection of conveyors; please inquire about the required dimensions. Please see my other listings.

Condition: used, Length: 480 cm Belt width: 90 cm Distance between scrapers: 32 cm Ncjdpfxozdvnps Alnou Scraper height: 8 cm Side rail height: 23 cm Overall height: 47 cm Belt suitable for food processing Stainless steel Manufacturer: Haith We offer a wide selection of conveyors. If you need one with different dimensions, please inquire. Please check out my other listings.

Condition: used, The tank is insulated with 8 cm thick polystyrene, double-jacketed with a steel outer shell and acid-resistant sheet metal inside. Free loading. The tank has a manway, which is not visible in the photo. Njdpeywfb Uefx Alnscu

Condition: used, Length: 315 cm Belt width: 150 cm Distance between scrapers: 31 cm Scraper height: 5 cm Drive roller diameter: 11 cm Side rail height: 11 cm Overall height: 24 cm Belt for food processing Stainless steel Manufacturer: Haith Njdpjzdux Tefx Alnocu Please see my other listings.

Condition: used, Length: 1000 cm Belt width: 45 cm Working width: 62 cm – with side guards and splash guard Side guard height: 11 cm Overall height: 26 cm Belt suitable for food processing Nodpjzduwiofx Alnscu Stainless steel Manufacturer: Haith Please check out my other listings.

Condition: used, Tape dimensions: Length: 1600 mm Width: 1200 mm Drum diameter: 115 mm Nsdpezdrbxjfx Alnjcu External dimensions: Width: 1900 mm Length: 2750 mm Height: 580 mm Feeder displacement using a pneumatic actuator over a distance of approximately 1000 mm. The stated price applies to one unit. Please see my other listings.

Condition: new, Year of construction: 2025, Paint booth, TM1010 paint wall made of INOX stainless steel. Working dimensions (mm): 1000 (w) x 1000 (h) x 600 (d) Overall dimensions (mm): 1200 (w) x 2200 (h) Technical data: 1,1 kW fan power, Capacity 4500 m³/h, Compression 870 Pa, 3 stage air filtration, Nsdped S N Swofx Alnscu 96% filtration degree, Explosion proof Ex fan, Inverter to adjust the fan rotation speed, IP 66 control panel, Hermetic lighting IP 65. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.