Condition: ready for operation (used), Year of construction: 1996, Used Comafer 50/40 briquetting press. The briquetting press has undergone a complete overhaul. Gujdpfx Agexzu Rds Dok

Condition: ready for operation (used), Offered is an ODMI molded part press, year approx. 1980. 4 hydraulic cylinders, 1-4 cylinders, hydraulic pressure max/min 250bar/30bar, pressing force up to 50t per cylinder, 2 pressing stations, automatic operation, opening height 1120mm, cylinder stroke approx. 800mm, piston diameter 160mm, piston area per cylinder 201cm². Table size X/Y 745mm/2140mm, known defects: pull cord not correctly wired according to press inspection, emergency stop not up to current standard. Right cylinder with slightly leaking piston seal. Dimensions X/Y approx. 3200mm/1300mm, weight approx. 8000kg. Inspection possible by arrangement. Gujdpfx Aexzt Dveg Djk

Condition: used, Technical data: Guodpfx Agjxzrt As Dok Number of pistons: 4 Piston diameter: 45 mm Connection to central heating: NO Shelf dimensions: 2500x1200 mm Clearance: 460 mm Hydraulic pressing Motor power: 2 kW Power supply: 380 V Overall dimensions: Length: 2900 mm Width: 1370 mm Height: 2150 mm

Year of construction: 2021, operating hours: 2,400 h, condition: used, functionality: fully functional, machine/vehicle number: LM68, For sale: Truss press for the production of lattice beams from the Belgian brand Stavelse Metaalbouw. Gujdpfx Agexzpn Rj Dek The package includes: - Press with up to 50 tons of pressure - Assembly tables for components, total dimensions 4.5x39 m - Two parking spaces - SL-LASER laser system - Truss stacker - Label printer The machine is from 2021, fully automated, and has been used very little.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Pellet plant – currently still in operation – inspection possible - Raw material bunker, 4 cubic meters, with discharge into a shredder, suitable for wood chips size ≤ G30 + conveyor belt Gusdpfxjw Hrg Nj Ag Djk - Shredder, 22.5 kW, with sound insulation cabin - Material bunker, 4 cubic meters, with LP series discharge conveyor belt - Pellet press LP22 (Integrated central lubrication, water pump, and temperature monitoring ensure maximum operator convenience) - Screening unit with conveyor for LP22 (including level sensor for BigBag with swiveling bracket and sensor cable for connection to pellet press LP22) - BigBag frame Vario 1.5 m³ - Bagging unit suitable for Vario BigBag system For further information, please feel free to contact us.

Condition: ready for operation (used), functionality: fully functional, pressing force: 400 t, stroke length: 150 mm, number of cylinders: 10, cylinder diameter: 120 mm, TECHNICAL DETAILS Maximum pressing dimensions: 1,500 x 4,400 mm Maximum stroke: 150 mm Pressing force: 400 t Number of cylinders: 10 Cylinder diameter: 120 mm Material of press plates: aluminium Plate thickness: 90 mm MACHINE DETAILS Electrical data Connected load: 7.5 kW Voltage: 380 V Type of heating: Oil Gjdjxw R N Iepfx Ag Deuk Dimensions & Weight Dimensions (L x W x H): 13,000 x 2,400 x 2,400 mm Weight: 25,000 kg EQUIPMENT With infeed and outfeed conveyor Heating boiler included

Condition: new, Year of construction: 2022, OMC 3000×1300 105T Oil Shelf Press Working surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Maximum heating temperature of 85 degrees Control system logic contorl Machine control from touch panel readouts Guedpfx Agjimwp Sj Dok Temperature, pressure force, shelf opening time, loading area calculator, glue process programming Power 21KW CE certificate Production 2022 Machine available on request New machine

Condition: good (used), Good condition. 3 t/h. 200 kW engine. Gusdpfx Agjxzi Ano Dok

Condition: used, Technical specifications: Briquette diameter: 60 mm Briquette length: 50 mm Hopper diameter: 1100 mm Hopper height: 910 mm Hopper capacity: 0.89 m³ Throughput: 60-80 kg/h Power supply: 400 V Motor power: 7.5 kW Safety switch Guedpfxoxzqmzj Ag Dok Overall dimensions: Length: 1670 mm Width: 1100 mm Height: 1500 mm

Condition: as good as new (ex-display), Year of construction: 2010, Capacity 180 - 300 kg/h Diameter of the briquets 50 mm 0,3 m³ lubrication pump 1,0 kW engine output 15 kW Guodpfjxy S E Njx Ag Dsk

Condition: excellent (used), Catalogue no.: 7815 TECHNICAL DATA Worktable dimensions (L/W): 2900x1200mm Overall table dimensions: 3000x1300mm Operating temperature: ±40-60°C Maximum temperature: ±60°C Total machine power: 5.25kW Vacuum pump power: 0.90kW Vacuum pump capacity: approx. 25/30m3/h Noise level: approx. 70dB Dimensions (L/W/H): 3060x1400x1400mm Godpfxjxwygce Ag Deuk Weight: 360kg – DTR Documentation – Unpainted – Very good condition – Used press Net price: 21,900 PLN Net price: 5,200 EUR depending on the exchange rate of 4.2 EUR (Prices may change with higher fluctuations)

Condition: used, Year of construction: 1990, No. 04502 Veneer press Ott JU 2511/70 Used, year of construction 1990 Godpfx Agsxwp S Is Douk Electro-hydraulic, approx. 15 kW Aluminum heating plates 2550 x 1100 mm LW Heating electric 4 hydraulic cylinders each 80 mm diameter Total pressing pressure 70 tons Specific pressing pressure 2.5 - 3.5 kg/cm2 Opening width 400 mm Button control for opening - closing - stop Pressure monitoring with automatic readjustment Adjustable limit switch for specific opening width HAWE pump Safety rip cord Incl. electric cable and plug 32 A Incl. electric plans, operating instructions as .pdf file Transport dimensions approx. 2900 x 1400 x 2000 mm LWH Weight approx. 3000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, Year of construction: 2023, OMC PL 105 LC 30/13 Water-based veneering press Working surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Maximum heating temperature of 85 degrees Guedpfx Asiypzleg Dek Control system logic contorl Machine control from touch panel readouts Temperature, pressure force, shelf opening time, loading area calculator, glue process programming Power 21KW CE certificate Production 2023 Machine available on request New machine

Condition: excellent (used), We offer for sale the following Gránit-Mill 90 wood pelletizing presses, in the condition shown in the pictures, after the pelletizing plant has ceased operation. The machine is made in Hungary, our company has an excellent relationship with the manufacturer, and we can help you purchase parts. Drive and sticker handling is similar to the old CPM machines. The presses (with pine) are capable of 1.2-1.5 t/h/pc. Price: €29 900/press Gusdpop T Twuofx Ag Dsk €49 900/ 2 presses Included in the price: pre-tank control cabinet dosing screw permanent magnet conditioner press motors pre-tank 1.1 kW feeder 1.5 kW conditioner 15 kW tablecloth 0.55 kW main engine 90 kW 3 stickers all three are made by La Meccanica barely used It has a 6 x 45 mm hole for pine 2 sets (total of 4) notched collars spare parts screws nuts breaker pin assembly aids Status: Engines and drives intact. Both machines tested. It is recommended to replace the neck bearing of the right machine. Smaller parts (such as the pellet cutter) must be replaced. There is no water supply, the place is prepared. The greasing method is manual, but central greasing can be easily installed. Summary: The machine on the left can be put into production immediately. It requires a minor service on the right side. If necessary, the machine can be tested at a pre-arranged time. Not in production, must be prepared. It is possible to check the mechanical durability and volume density of the produced pellets on site!

Condition: used, Technical data: Number of pistons: 8 Piston diameter: 90 mm Connection for central heating Shelf dimensions: 1300x3500 mm Clearance: 400 mm Hydraulic pressing Pneumatic side clamps Guodpfxexzdtnj Ag Dek Number of clamps: 9 Safety switch Motor power: 3 kW Power supply: 380 V Overall dimensions: Length: 4200 mm Width: 1700 mm Height: 2350 mm

Condition: good (used), I sell a pneumatic press. Gjdpfeun U Uijx Ag Dsuk

Condition: new, Year of construction: 2025, IDEAL FOR STAIRCASE CONSTRUCTION other variants on request - 5 tiers - clamping depth 1050 mm - 1 pressure beam -1500 mm long, 60 mm high, per tier - 3 infinitely adjustable pendulum counter bearings, 400 mm long, per tier - 2 hold-downs with handwheel, per tier - 5 support arms, per shelf - all support arms with plastic supports (glue-repellent) - maximum pressing length 1600 mm - powder coated (glue repellent): grey white RAL 9002, moving parts light blue RAL 5012 - the presses are delivered ready for operation with pressure regulating valve + air standard connection. Gusdpfx Agogu D Rmj Djk

Condition: excellent (used), functionality: fully functional, Brief description Table dimensions: 3000 mm x 1300 mm Number of cylinders: 6 Pressing force: 90 tons Table opening: 400 mm Guedexvx Ezopfx Ag Dok Heating with hot water Boiler: 20,000 kcal/h

Condition: like new (used), functionality: fully functional, power: 110 kW (149.56 HP), Complete Refurbished Amandus Kahl C35-780 Pellet Press. The C35-780 pellet press itself has been recently refurbished with a full documentation of the all the new parts available, with one of them included in the pictures. Gjdpexykzpofx Ag Deuk The pellet press has been refurbished in 2024. The production line includes: - Amandus Kahl C35-780 Pellet Press with hydraulic nut - The Pellet Press has a new 110 KW engine - Electrical cabinet with emergency stop including complete electrical documentation - 4 additional die's of 6 mm - 60 liters of extra synthetic oil List of refurbished parts: - 7 new bearings - 2 new wear rings - 1 new air filter - 2 new oil seals - 1 new oilfilter - 1 new oil pump - 20 liters of 800/460 Syntethic Oil - 1 New Pressure Piece Main Shaft

Year of construction: 1997, condition: ready for operation (used), functionality: fully functional, empty load weight: 13,200 kg, working width: 1,100 mm, workpiece height (max.): 35 mm, working length: 2,350 mm, machine/vehicle number: 8081.02, TECHNICAL DETAILS Working length: 2,350 mm Working width: 1,100 mm Max. machinable thickness: 35 mm Part dimensions max. Max. panel size: 1,100 mm × 2,350 mm Gujdsxyi Rpspfx Ag Djk Film width min. Min. film width: 1,300 mm MACHINE DETAILS Installed power: 38 kW Dimensions & weight Heating plate dimensions (W × L): 1,400 mm × 2,600 mm Usable surface (W × L): 1,180 mm × 2,430 mm Weight: 13,200 kg

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 109, briquette diameter: 80 mm, overall weight: 1,450 kg, TECHNICAL DETAILS Briquette type Briquette diameter: 80 mm Motor power: 11 kW Production output: 80 - 210 kg/h Machine performance Cycles per minute: 7 Gedpfxsxyi Ihs Ag Douk Number of cylinders: 3 Max. discharge length: 70 mm Container Ring diameter: 1,200 mm Container capacity: 1 m³ MACHINE DETAILS Dimensions and Weight Dimensions (L x W x H): 2,100 x 1,350 x 1,600 mm Weight: 1,450 kg Electrical Data Supply voltage: 400 V Frequency: 50 Hz Max. material moisture: 15 % EQUIPMENT Hydraulic oil machine Monoblock clamping system Capacitive sensor for automatic operation Viewing window End-of-cycle system Electronic pressure gauges for pump and clamping pressure Siemens touchscreen PLC Siemens display Operating hours counter Inductive limit switches LED machine position indicator Stamping unit Preheating system Oil level and temperature sensor Preparation for oil cooling in tank and material outlet Power stabilizer Service tools

Condition: like new (used), shelf length 3000 mm shelf width 1300 mm water heating 6 vertical hydraulic pressing pistons diameter of pistons 70 mm 3 hydraulic thrust pistons for stop movement diameter of pistons 80 mm 6 horizontal hydraulic cylinders Godexygcijpfx Ag Douk loading table 1800x3000 mm unloading table 1500x3000 mm

Condition: used, Technical specifications: Number of pistons: 4 Piston diameter: 60 mm Connection to central heating (CO) Shelf dimensions: 2300x1100 mm Clearance: 480 mm Hydraulic pressing Motor power: 3 kW Power supply: 380 V Godoxx Nv Aepfx Ag Douk Overall dimensions: Length: 3100 mm Width: 1500 mm Height: 1650 mm Net price: 17,500 PLN

Condition: ready for operation (used), functionality: fully functional, Good press for example high frequency use. I can sell also with one side High frequency wood bending generator. Plate is 1500*700mm. Gedpfxjxlr U Uo Ag Dsuk

Condition: refurbished (used), Year of construction: 2016, LAMELLA - CARCASE PRESS GANNOMAT « CONCEPT 70 ECO » Complete in standard configuration with: - Sturdy, torsion-resistant frame made of steel in welded and bolted construction - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with proven tolerance compensation system (Ganner system) for tightly pressed carcase joints - Counterpressure surfaces (side pressure wall, base) made from 38 mm thick, coated, continuous support panels - Continuous pressing surface with a height of 95 mm on the lower vertical pressing beam - Electromotorical adjustment of both pressing beams via precision trapezoidal-thread spindles (with increased pitch and concentricity accuracy) and high-performance traveling nuts with grease reservoir - Pressing is carried out electrically via 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the beams is infinitely electronically adjustable via 2 potentiometers and regulated by a frequency inverter, resulting in absolutely wear-free pressing force control - Pressing force for horizontal pressing beam: min. 500 daN (kg) up to steplessly max. 2200 daN (kg) Pressing force for vertical pressing beam: min. 300 daN (kg) up to steplessly max. 2200 daN (kg) Pressing and adjustment speed of the beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second Very easy operation - Working height/loading height: 300 mm - Working dimensions: length min: 150 mm, max: 2500 mm height min: 150 mm, max: 1400 mm depth: 700 mm Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Gujdpsxvitiofx Ag Dok Set of machine feet for 500 mm working height Operating manual in German language Completely overhauled by Ganner, 6 months parts warranty Location: Ex stock 54634 Bitburg - immediately available -