Condition: good (used), Used machine, good condition. Delivery time appr. 16 weeks after ordering Basic machine starts at 139.700 € net *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Options at extra cost: Temperature control unit for the pressing tools to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - absolutely necessary for operation including the corresponding control + €7,850 net Godpsfmqq Eefx Ag Dsuk guillotine or pill crusher, for cutting the briquettes to length + €6,900 net Necessary for compressed air connection! Silo for MAP series + €19,940 net - Storage silo above the machine - Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator. Transport line / cooling section (nominal value: 4x2m) each 2 meters 990 euros net Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Condition: excellent (used), Year of construction: 2020, HPPA through-feed press manufactured by Famad Paczków, year of manufacture 2020. The press is designed for through-feed gluing of door packs, MDF boards, plywood, veneer, etc. It features a pneumatically lifted chain conveyor for loading and unloading, and can operate independently or as part of a production line. Gusdpevla A Dofx Ag Djk

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2101177, height adjustment type: electric, type of input current: three-phase, Pelletizing plant for wood / straw / hay / sheep’s wool / feed – currently still in operation – inspection possible - Raw material bunker with discharge to cutting mill, suitable for wood chips up to and including G30 size + conveyor belt - Cutting mill 22.5 kW with spare blades - Material bunker 4 m³ with discharge conveyor belt, LP series - Pellet mill LP22 (integrated central lubrication, water pump, and temperature monitoring ensure maximum user-friendliness) - Screening unit with conveyor belt for LP22 (incl. level sensor for BigBag and sensor cable for connection to pellet mill LP22) - 6x Vario BigBag rack, 1.5 m³ each - 20x production BigBags for pellets Guedpfx Aexwzkieg Dok - Dies for wood pellets available in sizes 6x19mm to 6x24mm - Dies for straw and hay pellets: 8x25mm For further information, please do not hesitate to contact us.

Condition: new, Year of construction: 2021, machine/vehicle number: MR004301, Manually operated glue presses with a maximum height of 1800 mm. The price is for a ready-to-use unit, ex Staphorst. On-site delivery is available at an additional cost. The press is equipped with the following options: Gsdsvcy Emepfx Ag Dsuk - Manual pressure unit at the front Technical specifications: - Clamp cylinder stroke: 60 mm - Wheel set: Yes - Maximum length: 2500 mm - Maximum height: 1800 mm - Number of vertical pressure bars: 4 - Maximum cylinder pressure weight: 450 kg - Serial number: 8877

Condition: excellent (used), functionality: fully functional, Electric water heater Gusdjvbfvhepfx Ag Dsk Maximum power - 18kW

Condition: excellent (used), Year of construction: 2010, working width: 550 mm, working length: 2,950 mm, working area 2950x550mm Guedpfxoqfacts Ag Dek 10 arms pneumatic clamps arms adjustable manually

Condition: new, Year of construction: 2026, Production time of the machine approx. 3.5 months Very robust machine with high pressing force - is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to faults + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + € 3,995 net, (can also be retrofitted later) * cools the press tongs (important from 3.5 hours) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compressor chamber + € 1,975 net recommended for light starting materials such as wood shavings Product code: 84793010 Briquette diameter: 65 mm Front bush: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Output (depending on material): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 qbm Pump: 37 liters Hydraulic pre-compressor Cooling press tongs option: yes, with special accessory Coolable press tongs Cooling of the pressing tongs via water tank (to be procured on site) Hydraulic oil cooling option: yes Fill level monitoring option: yes Briquette option: yes (depending on material) Gusdpfx Agoffh Ate Djk CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18 % - Chip length maximum 15 mm - Installation temperature: tempered room at a minimum of +5°C - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result

Condition: used, Year of construction: 2002, functionality: fully functional, Manufacturer: Orma Macchine (OleoSystem), Italy Guedpfxjxwwgge Ag Dok Model: LS-ECO 30/13 Year of manufacturer: 2002 Type: Panel press Working dimensions: 3000x1300 mm Thickness of the panels: min. 12 mm/ max. 50-60 mm Electric: 308 V, 50 Hz, 3 kW, 7A Machine dimensions: L 4000 x W 2100 x H 1900 Weight 3900 kg

Condition: used, Year of construction: 2019, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: BP 500 A, DESCRIPTION BRIQUETTING PRESS This press is intended for compressing secondary raw materials into briquettes (briquette shape: rectangular). Technical specifications of the press: Dimensions: Length: 1800 mm (2100 mm for transport) Width: 1800 mm (2000 mm for transport) Height: 1900 mm (2200 mm for transport) Net weight: 2945 kg Power supply: 380 V, 50 Hz, 33 kW, 70-100 A Output capacity: 450 kg/h (+/-50 kg depending on raw material type and fraction) Noise level: A-weighted sound pressure level at operator’s station: 77.8 dB +/-5 dB Compression pressure: Minimum: 1000 kg/cm² Maximum: 1700 kg/cm² Pressure: Max. 300 bar Raw material moisture content: No more than 14% Briquette dimensions: Width: 150 mm Gujdjxmav Njpfx Ag Djk Thickness: 60 mm Length: 40-105 mm Permissible ambient temperature for operation: -20°C to +35°C (up to +50°C with additional cooling system) The press consists of: Electrical system – controls the hydraulic press system. There are four electric motors: the first (30 kW) drives the main hydraulic pumps, the second (1.1 kW) powers the cooling hydraulic pump, the third (0.55 kW) drives the cooling fan of the oil system, and the fourth (1.5 kW) drives the sawdust feed screw. The operation of the motors and hydraulic valves is managed via contactors and intermediate solid-state relays by a microprocessor with expansion modules. For visualization and parameter adjustment, a liquid crystal display with buttons is provided. Hydraulic system – manages the operation of hydraulic cylinders using pumps, high- and low-pressure valves, solenoid valves, and hoses. There are three hydraulic cylinders: the first is the main cylinder for compressing sawdust, the second is a vertical cylinder for initial sawdust compaction, and the third is a forming cylinder for moving the briquette form. Also installed are an oil cooling system with a pump and air cooler. Oil filtration is performed by the main high-capacity filter, a filter for the cooling system, and a fine filtering unit. Feeding of raw material into the press is performed by an integrated loading hopper. The raw material in the hopper is mixed intermittently to prevent bridging. The mixer is driven by a chain from the auger gearmotor. The auger cyclically feeds the material to the shaft of the vertical cylinder. The hopper is equipped with two level sensors – lower and upper. When the hopper is enlarged, the sensors can be repositioned as needed. Control – dual-mode, manual and automatic, is provided. All control equipment is mounted in the electrical cabinet. Automatic control constitutes the normal press operation without operator intervention. Manual control is used for press setup, troubleshooting, returning the cylinders to their home positions, or in emergency situations. Operation is facilitated by a display located on the cabinet door. It allows for viewing and adjustment of input parameters, as well as real-time monitoring of press status and error messages.

Condition: excellent (used), Year of construction: 2018, operating hours: 872 h, functionality: fully functional, machine/vehicle number: 910-2265, total width: 1,350 mm, total height: 1,410 mm, total length: 1,900 mm, briquette diameter: 60 mm, overall weight: 750 kg, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, oil tank capacity: 100 l, pressure: 160 bar, power: 5.5 kW (7.48 HP), filling opening length: 1,044 mm, filling opening width: 1,044 mm, Briquette diameter (mm): 60 Guodpfx Aoxwm Utsg Dok Hydraulic motor (kW): 5.5 Permanent agitator (kW): 0.5 Screw conveyor motor (kW): 0.6 Oil capacity (approx. l): 100 Weight (approx. kg): 750 kg

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: LGMATECH KORPUSSPRESSE, Body press in immediately operational condition. The press can be inspected at any time by appointment. Guodpfx Asxf Dvwjg Dek

Condition: good (used), Year of construction: 2013, operating hours: 37,400 h, functionality: fully functional, machine/vehicle number: 2110, total width: 2,000 mm, total height: 2,100 mm, total length: 3,000 mm, overall weight: 5,500 kg, Hydraulic system: - Power-regulated axial piston double pump  Maximum operating pressure: 300 bar  Drive motor: 55 kW, 400 V, 50 Hz, 3-phase AC, 1,500 rpm  Motor designed as an energy-efficient motor, efficiency class EFF1 Gedexwiziopfx Ag Dsuk  Protection class: IP 54 - Valve voltage: 24 Volt DC - Hydraulic tank (950 liters) with additional cooling and fine filter circuit, 5µm filter unit, drive 2.2 kW - Large double return filter integrated in the tank, 10µm filter unit - Hydraulic tank integrated into the supporting frame Electrical configuration: - Machine control cabinet according to DIN EN60204-VDE 0113, protection class IP 54 - Input voltage: 400 Volt, 50 Hz - With lockable main switch inside the enclosure - Emergency stop button in the control cabinet - Control voltage: 24 Volt DC - Freely programmable control (PLC) SIEMENS S7-200 - with Siemens TP 177B operation and display panel  Display and modify operational states and values  Perform operations  Display error messages - Automatic start/stop via light barrier integrated in the feed hopper - All initiators with contactless switching - Gear motors and pump motor with thermal winding protection contacts Material feed: - Feed hopper with fill opening of 800 x 400 mm - Robust sheet steel construction with reinforcements - Hopper volume approx. 150 liters - Agitator to prevent bridging, powered by 0.55 kW drive - Feed screw with 1.5 kW drive - Feed time automatically controlled by PLC Pre-compactor: Vertically arranged, hydraulically operated. - Pre-compactor pressure adjustable via TP 177B - Dust-tight control enabled by the distance measurement system developed and patented by RUF Main compactor: Horizontally arranged, hydraulically operated. - Press pressure adjustable via TP 177B up to 300 bar - Hydraulic cylinder 350, with a pressing force up to 300 tons Press output: - Depending on settings and material, up to 600 pieces per hour (approx. 800 - 1,000 kg/h) Briquette dimensions: - 240 x 70 mm - Briquette length 70 - 110 mm; depending on settings and the type and bulk density of the material to be briquetted - Max. specific pressing pressure approx. 1,776 kg/cm²

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, Briquetting press for wood or wood-like materials Throughput: approx. 80 - 100 kg/h Briquette: 60 mm cylindrical Motor: 7.5 kW Oil heating 6,374 operating hours Dimensions: approx. 2150 x 1700 x 1400 mm Container size: 1400 x 1400 x 920 mm Optional: Extraction unit available as a hopper attachment. Requirements: Ideal input material: chip length less than 25 mm Moisture content: 6–12% ATRO Guedpfx Aew Hpizog Djk Machine is suitable for intermittent operation, e.g. up to 2 hours briquetting; 1 hour pause, etc. If the machine is to run continuously for more than 2 hours at a time, an optional cooling system must be connected.

Condition: reconditioned (used), functionality: fully functional, Veneering press line for wood, consisting of the following machines: - OSAMA S2R glue spreader - 1300 mm - NEW MACHINE - Loader from glue spreader onto conveyor - Infeed conveyor, length 6000 mm x width 950 mm, motorized - ORMA hydraulic flat press 5100x1400 mm – 12 cylinders, hot water heating plates, refurbished - Outfeed conveyor, length 6000 mm x width 950 mm, motorized This press requires medium to high pressure to ensure the panels are 100% flat. Panel size: 5100 x 1400 mm (solid drilled steel plates) Daylight opening: 180 mm Full surface pressure: up to 10 kg/cm² Number of hydraulic cylinders: 12 units – cylinder diameter 140 mm MYLAR Teflon film on the plates Preparation for hot water plate heating – boiler not included Machine dimensions: 2300 x 5100 mm x height 2500 mm The machine is fully refurbished, calibrated, and tested. Guodjvva Syspfx Ag Dek Price: €55,000 excl. VAT, without OSAMA glue spreader Price: €62,000 excl. VAT, including OSAMA glue spreader

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Gjdefh Tmmspfx Ag Djuk Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: like new (used), Year of construction: 2023, operating hours: 990 h, functionality: fully functional, type of input current: three-phase, total height: 3,900 mm, input current: 63 A, total length: 9,500 mm, total width: 4,500 mm, power: 15 kW (20.39 HP), Equipment: documentation/manual, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), as well as feedstuffs. This is a complete plant built on a base frame, consisting of the following components: - Raw material hopper 4 m³ incl. agitator. This was extended by approx. 3–4 m³ with wooden panels. - Intermediate screw conveyor to hammer mill - Hammer mill 11 kW for size reduction of wood chips or other materials - Inclined mixer for material homogenization, incl. moisture measurement, dosing, and level measurement - Dosing hopper for pressing aids feeds into the inclined mixer - Dosing screw conveyor for optimal material feed into the press (speed-controlled) - Press 15 kW including full indicator, temperature monitoring and discharge chute - Conveyor belt to dedusting screen - Dedusting screen with material discharge at 3 m height The plant is designed so it can be easily expanded with a second 15 kW press. The entire system is centrally operated via Siemens PLC with touch display. All parameters are monitored so that the press will be shut down automatically in the event of a fault. The press can also be operated and monitored remotely from any PC. The chip dryer shown in photo 2 on the wall, including discharge and control system, is also available for purchase. For details, please contact us. Gjdpexv Dkcjfx Ag Deuk

Condition: used, Membrane Press - ORMA PM, CE Working dimensions: 2400 x 1000 mm Pressing force: 200 t Heating plates: Yes Double membrane: 1 Principle: Overpressure system Total power: 52 kW Overall dimensions: 3800 x 2000 mm Gujdpfxoxvzahe Ag Dsk

Condition: new, Year of construction: 2025, Hydraulic briquetting press with 4 kW main motor. It produces 50mm diameter briquettes. Capacity of the machine is: 30-50 kg/hour. The raw material hopper is 1m3, and has an agitator on the bottom. The machine has an oil cooler for the continous work. Godpfx Aef Hmi Eeg Douk

Condition: like new (used), Year of construction: 2024, operating hours: 29 h, *one machine is ready for delivery and ready produced Press can only be supplied with a system component such as a chipper, cutting mill, hammer mill, screw conveyor, conveyor belt with overbelt magnet or suction RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette sellers. Classic type - throughput up to 425 kg / h * depending on the material Options for an extra charge: Plant construction / mütek system technology: - mütek shredder MRZ shredding technology - conveyor belts - Overbelt magnets - Extraction systems, optionally with rotary valve - screw conveyors - silos - Control links of all kinds - semi-automatic packaging technology Press: - Packing table with drawer - Top-mounted silo with discharge Your advantages: Most important point: + Very established, well-engineered die press thanks to 25 years of experience. The difficulty and the know-how lies in the detail. For example, valves and cylinder seals of the highest quality. + 24h operation possible + Longevity + Low maintenance costs + Compact structure + High energy efficiency thanks to innovative hydraulics Technical data briquetting press: Throughput: up to 425 kg / h * * depending on the bulk weight of your raw material * based on a bulk weight of 200 kg per cubic meter Detailed information after a successful test with your material. If no test material is made available to us, we cannot make any statements about the briquette quality and throughput. Gusdpfx Aefhql Tsg Dsk Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compressor Main hydraulic compressor Pressing pressure: up to approx. 1700 kg / cm² Hydraulic system with 260 liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 ph Manual operation of all cylinders "Dustproof" switch cabinet with PLC control and touch display Total power consumption of the briquette press: approx. 33 KW Muxzr8 Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 15% - Maximum chip length: 20 x 2 x 2 mm - temperature where machine is placed + 8 degrees - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear.

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, briquette diameter: 60 mm, Refurbished machine suitable for smaller, single-shift carpentry operations. It offers a robust construction while providing solid performance. Maximum briquette output: 70 kg/h. Year of manufacture: 2003. In very good and well-maintained condition. Original warranty and post-warranty service available directly from our company. Professional PRODECO hydraulic briquetting presses are ideal for small and medium-sized woodworking operations. They enable efficient processing of waste into environmentally clean, high-calorific fuel without the need for binders. These machines are characterized by compact space requirements, low energy consumption, and easy operation. Technical specifications: - Motor power: 5.5 kW - Briquette output: 35 to 70 kg/h (depending on material) - Briquette diameter: 60 mm - Briquette stroke length up to 60 mm (so-called endless briquette) - Hopper diameter: 1000 mm Gusdpfxsvva Rps Ag Dsk - Weight: 650 kg - Machine dimensions: 1170 x 1700 x 1510 mm Features: - Hydraulic unit with 7 pressing cycles/min - Dual manometer for improved pressure monitoring - Level sensor for the height of briquetted material - Oil level sensor - Inspection window - CE safety standard compliant - Moisture content of processed material must not exceed 18% The machine is refurbished, calibrated, and tested.

Year of construction: 2012, condition: excellent (used), COLUMBUS Vacuform Standard High-performance vacuum pump BECKER Vacuum tank 200 l Digital pressure regulation Digital vacuum gauge Highly elastic natural rubber membrane Sturdy worktable Swivel castors with brakes Godpfx Agjxgg Tbo Deuk Working dimensions approx. L x W 2900 x 1300 mm Pressing pressure max. 0.85 kg/cm2 = approx. 29 t Connected load 0.75 kW, 400 V 50 Hz Tank capacity 200 l CE Transport dimensions approx. L x W 3100 x 1550 mm Weight approx. 400 kg

Condition: new, Year of construction: 2025, Small hydraulic briquetting press. Main motor is 4 kW, briquette diameter is 50mm. Capacity of the press is 30-50 kg/hour. The machine is new, and has CE certificate. Customer can order it with oil cooler. For more information visit our YouTube channel, webpage or Facebook site. Guedpfx Aofk N Tpsg Dsk

Condition: good (used), Refurbished machine Basic machine starts at a price of 147.700 € net *Options at additional cost, see below with a full 1 year warranty Ready for delivery approx. 16 weeks after ordering Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Options: -Silo for MAP series Storage silo above the machine - Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator. 19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo if you need to place two machines MAP 1200 below one silo it needs to be build completely different. the price for this silo is 37.900 € net -Temperature control device for the pressing tools to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - must be left for operation including corresponding control € 7.850 net Oil heater 1.950 € net -Guillotine, to cut the briquettes to length Create a compressed air connection on site € 6,940 net plus VAT -Transport line / cooling section (nominal value: 4x2m) 990 euros net per 2 meters - Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) Gusds E Dquopfx Ag Dok based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: as good as new (ex-display), Year of construction: 2024, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Including 1 year warranty. Your advantages: + Very robust, simple technology Gujdpfxjd Nnwlj Ag Dok + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to a maximum of 20 kg/h. *depending on material Machine dimensions approx. 137 x 75 x 148 cm (length x width x height), Weight of the machine: approx. 250 kg, Capacity of the silo: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: -Wood chips and dust smaller than 15 mm in length -Moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear --- Options at extra charge: --Timer function + 490 € net Machine is started manually and switches off automatically after a set time X. -Level indicator for automatic operation + 1450 € net Press starts and then stops automatically * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + 890 € net (delivery time then approx. 8 weeks) - Special pressing units + 2.950 € net ---

Condition: good (used), Year of construction: 2001, Good, used condition. Few operating hours (1675 hrs). Motor: 11 kW. Throughput up to a maximum of 220 kg/h. Briquettes: 150x60 mm. Press dimensions: Gujdpfx Agswcc D Rj Dok approx. 2200x3000x1920 mm (LxWxH). Control cabinet dimensions: 500x1250x2120 mm (LxWxH). Weight approx. 3000 kg.