We are pleased to offer:
2000 NIKKO Arrowcut N 105 XR, Year 2000: Serial Number: 5673.
Equipped with:
Pre loader
Automatic stripping section
2 form holding chase
M0b8h
Center line with 1 mm plate system
Non stop delivery
In Production, good condition and available immediately. more
Automatic Diecutter Beiren 1050 Ref 1632
year: 2007
max size: 1050 x 750
min size: 450x400
max pressure: 300T
stock range: 0.1mm do 1.5mm
9r80vxm3a
weight: 16 000kg
stripping unit
counter: 27 000 working hrs more
Main technical characteristics:
Max. format of sheets is 800 x 1120 mm,
Min. format of sheets is 360 x 500 mm,
Max. punching force at the largest format is 240 tons,
Used paper 100-1000 g / m2
Max. thickness of cardboard is 3 mm,
Corrugated cardboard B,
The maximum speed is 4'000 cycles / hour.
Equipment:
Vacuum non-stop feeder Mabeg,
Feeding table with belts and side mark,
Punching section,
2 cleaning sections,
9auwjotiu
Non-stop delivery,
2 final frames,
2 cutting plates.
Machine in product... more
• Max Sheet Size: 750mm x 1050mm
• Max Caliper: 1.5mm carton board, 3mm corrugated
• Max speed: 8,500 sph
• Max platen pressure 300 tons
• Automatic die cutter with stripping and carton separation
complete
• Automatic feeder with steel sheet
• power hoist and non stop facility,
• Complement of infeed table furniture,
• Left hand side register lay,
• Inter lever sheet insertion system for carton delivery pile
82iqoegg3
stability,
• 1 chase, 2 sets of stripping frames, 2 sets of carton
separation... more
Automatic Die Cutter Bobst SP102E
8urrfo7zr
Year of man. 1988
Format max 720×1020
Format min 350x400mm
Stripping station
Cutting force up to 250T
Running speed up to 8500/h
Machine is overhauled, technicaly and electricaly checked, equipped with new chains, cleaned and repainted
Excelent running condition
more
Heidelberg Varimatrix 105 CS ref 1631
M2cpp
year 2006
max sheet size 74x105
Non Stop feeder
side lay - L and R
stripping unit
high pile delivery
machine still in production - available December more
Size max 590x820mm
Paper from 100g/m2 up to microflute
Stripping station
Myhe9
Speed up to 5000 sheets/h
We offer this machine "as is" cleaned and checked in very good running condition
Available end of July 2017
Tests possible more
Automatic diecutter TMZ 5002 ref 1627
year 1989
Max sheet size 650x920mm
Max pressure 150T
1 x cutting plate
1 x chasse
No stripping unit
9n9nxcjqq
condition - very good!
more
• Max paper size 1060 x 740mm
• Min paper size 400 x 330mm
• Max cutting size 1050 x 735mm
• Paper thickness 0.1mm to 1.5mm (up to B-Flute).
• Cutting strength 300 T
• Max speed 7000 sheets/hour
• Material thickness cardboard from 0.1 - 1.5mm and up to B
flute
Opyfkifd
• Non stop feeder.
• Stripping unit with tooling
• Non-stop delivery
• Vacuum pump and trafo more
Bobst SP 1080E Ref 1542
Bkw9ofx
year: 1955 - refurbished 2013
max size: 1080 x 780
min size: 350 x 295
max speed: up to 4500 sph
die-cutting unit
stripping unit
very good condition! more
• Size 102 x 142 cm
stripping (dismantled, was never used)
• frame and plates
• good condition
• in production
8n9z9q0n0
• available immediately
totally overhauled 1998 more
We have for sale as owners automatic die cutter
SANWA TRP 1060 SE
8l7tule9w
Year 2003
Max paper size 1060 x 740mm
Min paper size 400 x 330mm
Max cutting size 1050 x 735mm
Paper thickness 0.1mm to 1.5mm (up to B-Flute).
Cutting strength 300 T
Max speed 7000 sheets/hour
Material thickness cardboard from 0.1 - 1.5mm and up to B flute
Non stop feeder.
Stripping unit with tooling
Non-stop delivery
Vacuum pump and trafo more
Qzqp8pitax: 750 x 1050 mm
Min: 370 x 400 mm
Max Speed: 6000 B/h.
Maxi. Platen pressure: 300 To.
Non-stop suction feeder.
Left and right side lays.
Two sheet detector.
Front register lays.
2 cutting form chases.
1 mm cutting plate system.
1 standard cutting plate.
Stripper with 3 frames and equipment.
Setting and fault display computer.
Non-stop delivery curtain. more
• max size: 1650x1200mm
• min size: 650x520mm
• max speed: up to 5000 sph
• max pressure: 400T
• corrugated board: from 1mm to 8mm
Bwewd8ud8
• top feeder
• stripping unit
more
for the converting of carton, E- and B-flute
8cvuot2os
- max. sheet format 800 x 1,120 mm
- min. sheet format 360 x 500 mm
- max. dimensions of cutting die 790 x 1,110 mm
- max. mech. strokes per hour 6,000
- max. cutting pressure 3,2 MN (320 t)
consists of:
- machine with Mabeg Non-Stop feeder, incl. vacuum pump
- die cutting station
- stripping of the internal waste and the side and rear sheet edges^
- delivery station with manual Non-Stop-Rack
machine raised up by 600 mm
more
Chamfering cutters for CNC machines
Shank 25mm
Speed Max 18000 RPM
Suitable for indexable inserts of R2 and R5
Includes 48 inserts (34 units in R3 and 14 in R5)
Please the PDF file with our terms and conditions and order form.
Ssmh0c
The machine can be demonstrated like by appointment with us on-site. We offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider".
more
for the converting of carton, E- and B-flute
- max. sheet format 1,020 x 1,420 mm
- min. sheet format 590 x 700 mm
Czr0ttuwe
- max. dimensions of cutting die 1,010 x 1,410 mm
- max. mech. strokes per hour 5,000
- max. cutting pressure 6,0 MN (600 t)
consists of:
- machine with Mabeg Non-Stop feeder, incl. vacuum pump
- die cutting station
- stripping of the internal waste and the side and rear sheet edges^
- delivery station more
- max. sheet format 820 x 1,130 mm
- max. mech. strokes per hour 9,000
- max. cutting pressure 4,0 MN (400 t)
- machine with high-performance sheet feeder for manual Non-Stop operation
2qrdvm
- for fully automatic cutting, creasing and embossing, with or without gripper edge
- including stripping of the internal waste and the side and rear sheet edges
- including piling of the processed sheets with gripper edges still attached, or alternatively
- stripping the gripper edges and piling the remai... more
We are pleased to offer:
Gopfert Box Maker Machine Stand Alone Die Cutter, Year 2002
Serial Number 2936 02 09
Model PRS 17 TL 2000
Sheet Size Minimal 300 x 400 mm
Sheet Size Max 1400 x 4000 mm
Iei2k8j
Board Thickness 2 to 7 mm
Slot Width 8 mm
Diecut Surface Max 90 x 1400 mm
Good condition
Located in Belgium
Inspections welcomed
Available Immediately more
Mvh0l
Smart Feeder, Manual non-stop feeder, Easytransfer, Photocells for automatic cycle, Power Register II, Cam driven platen, Autoplatine, CUBE3-System, Additional CUBE Monitor, Centerline System, Chase Changer, Blanking Unit, Stripping Unit, Automatic device for opening the gripper in stripping unit, Bernoulli System at Stripping Station, Bernoulli System at delivery station, Anti-static device, Device for high-speed diecutting of Paper, Highway Vista, Highway Memory, Non-stop delivery, Si... more
Format printing substrate
min 350 x 400 mm
Max. 720 x 1020 mm
Diecutting area max: 690 x 1010 mm
Cfks0kvu
Cutting force up to 2,5 MN (250 t)
Material thickness max. 1,000 g / m2, 2 mm fine shaft
Running Speed max. 7500 Bg / hr
Codeleser camera
1 honeycomb foundation
5 Closing frame
7 Lower frame
1 working table more
Format 80 x 120 cm
Swivelable control panel, safety devices according to CE, double limit switch assembly,
automatic lubrication,
Operating options continuous, single stroke and time controlled
Quick-release frame with hand crank
Eh00ivhpq
Hardened punching plate
External control cabinet
Documentation if available
The machine is currently under construction at the plant (Spain).
The machine is completely cleaned, tested and tested, necessary repairs
carried out. Paint of the machine is renewed ... more
Size: 105 x 75 cm
Machine: Automatic punching and creasing machine with stripping station
Model: - Brausse 1050 SE
9nue0cmov
Control: - NON-STOP feeder with automatic stack plate lifting
- 4 Separating and towing suckers
- Side mark to BS and AS changeable to pulling and bump operation
- Sheet synchronizing device between feeder and machine
- Patented turbo blast system
- Exactly adjustable side air nozzle
- Electric double sheet control
- 4 electronic front lay controls
- Electronic si... more
WE ARE PLEASED TO OFFER
IIJIMA MJ 1040 E
Year 2009
Max. sheet size 730 x 1040 mm
Min. sheet size 350 x 400 mm
Max cutting area 720 x 1015 mm
Max speed 8000 sheets/ hour
Max pressur 300 tons
Feeder pile height : 1400 mm
Delivery pile height : 1100 mm (en Non-stop)
Press counterpart 4+1 mm
Auto stipping system with triple mouvement
Centerline
Micrométrique settings of 1mm steel plate
Machine weight 15T
Non Stop feeder & delivery
Kxnwv0gl
more
The digital display on the control panel Side and front register sheet by sheet Double sheet detector with device for emergency stop. Stripping station
9nxhoxsva more
- with stripper
maximum paper size: 740 x 1060 mm
min paper size: 330 x 400 mm
Punching force: 300 tons
Paper thickness: 0,1 mm-1,5 mm
max. speed: 7000 sheets /h
Efeawgvmi
more
Tosi 1200 x 1800 Ref 1546
year: 1989
electromagnetic clutch and brake
central lubrication
hard cutting plate
3 work modes
machine has been cleaned, repainted, serviced!
B0t2lxxg
very good condition! more
M0myp• Max 1000 x 1400 mm
• harded cutting plate
• pneumatic clucth
• pneumatic brake
• 3 working modes
• machine has been cleaned and checked
• Immediately available. more
Size: 64 x 91,5 cm
Video (deutsch): [...]
Video (english): [...]
Machine: montex rotary die-cutter DC
Type: - Rotary Sheet-fed Die Cutter
Model: - DC 915 (SORD-DC)
Feeder: - Stream feeder
Anti-static: - No
Format: - max. 640 x 915 mm
- min. 280 x 420 mm
Gripper margin: - 8 - 10 mm
Material thickness: - 40 - 450 g/qm
Control: - SPS programme control Siemens S7
Equipment: - Touch&work technology
- 2 high precise magnet-cylinder
- Shoot high-quality flexible dies to 1 mm cutting rule height
De... more
The Machineseeker trust seal gives buyers the ability to detect whether they have to do it with a trusted seller at a glance.
What do we check?
Check of the trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of the telephone accessibility the main phone number.
Credit report must not contains negative criteria.
Buyer complaints can lead to the withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course occur anyway during the purchase process differences of opinion. Machineseeker and Thorsten Muschler GmbH is not liable for violations of the active Maschinensucher or Machineseeker buyer or seller.
Try our Machineseeker app now! Machineseeker app for iPhone and Android.
+44 (0) 20 806 810 84
+49 (0) 201 857 86 10
+48 (0) 223 076 958
