Used Guillotines for sale (928)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, control type: manual, sheet thickness (max.): 6 mm, Equipment: emergency stop, finger protection, foot remote control, Techna – Fab Swing Beam Guillotine Model: QC12Y-6 x 3200mm Year: 2007 Nedpfx Aszv Tzkjhkeda Max. Cutting Length: 3200mm Max. Cutting thickness: 6mm Machine with: Power Back Gauge Squaring Arm Front Supports

Condition: ready for operation (used), functionality: fully functional, Equipment: finger protection, Edwards Pearson Guillotine Model: VS Capacity: 6.5 x 3070mm Control: Swissax 2000 Machine With: Power back gauge Rapid blade gap Front supports Squaring arm Ndsdpfx Ahszv Ty Tsksa Excellent condition

Condition: used, functionality: fully functional, 3-meter hydraulic plate shear from Jorg Type: 4865 Capacity: 3100 x 4 mm Electric back gauge Nsdpezvynwofx Ahkjda

Condition: good (used), functionality: fully functional, Year of construction: 2008, Used Baykal plate shear Type MGH 3100 16 Capacity 3100 x 16 mm Adjustable back gauge Adjustable cutting clearance Rear safety guard Nsdpezvqqisfx Ahksda

Condition: good (used), functionality: fully functional, Year of construction: 1993, Well-maintained, used plate shear from Amada. Type: GPX 1230 Capacity: 3050 x 12 mm Equipped with a high-precision table at the rear. Ndodpfx Aszvqprehksa

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, control type: CNC control, controller manufacturer: Robosoft, controller model: PC90, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, stroke rate (min.): 14 1/min, sheet thickness (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, back gauge: 1,000 mm, overall weight: 8,500 kg, total length: 4,100 mm, total width: 2,400 mm, total height: 2,300 mm, Maximum sheet thickness: 12 mm Max. cutting length: 3100 mm Stroke length at full length: 7 mm Stroke length at short length (1000 mm): 14 Ndodpfozvf Hrex Ahkja Cutting angle: 0.5 - 3° Length of back gauge: 0 - 1000 mm Number of lower clamps: 18 Operation: Mechanical or hydraulic (Hydraulic) Power: 24 kW Length: 4100 mm Width: 2400 mm Height: 2300 mm Weight: 8500 kg

Condition: used, Year of construction: 1995, Cutting line Polar 92ED Year: 1995 Consisting of Paper jogger Polar R2 Year: 2007 Guillotine Polar 92ED Year: 1995 Description - Colour monitor - Side table on the left - Side table on the right - Cutting table with air - Air blower - Photocell protection Ndjdpfx Ajzvd Nrshkja - Number of knives: 2

Condition: good (used), Year of construction: 2008, total length: 2,000 mm, total width: 1,600 mm, total height: 1,900 mm, overall weight: 800 kg, For Sale: Tromp Guillotine / Dough Divider For dividing/cutting dough pieces. This guillotine is suitable for croissants, ciabatta, etc., and can be used for all types of divided products. It can also be integrated into a lamination line. - Brand: Tromp - Type: Guillotine / Dough Divider - Blade is easy to replace Ndodpfozvdbnex Ahkea - Servo-controlled - Controller type: Lenze - Blade width: 780 mm Overall dimensions: 2000 mm x 1600 mm x 1900 mm It is possible to view this machine on-site. If you have any questions or comments, please do not hesitate to ask. Sincerely, Leo Holland

Condition: used, Year of construction: 2002, Hydraulic Guillotine Shear HACO TS 3006 Capacity: 3100 x 6,5 mm Back gear gauge travel: 1000 mm Ndodpfezwclusx Ahksa Year of construction: 2002 Motor power: 7,5 kW SP8 Command Blades with 4 cutting edges Voltage: 380 V Photocells at the back Length: 4000 mm Depth with photocells : 2800 mm Depth without photocells: 2200 mm Height: 1900 mm Weight: approx 5 T

Condition: good (used), functionality: fully functional, Year of construction: 1997, sheet thickness steel (max.): 12 mm, power: 22 kW (29.91 HP), input voltage: 380 V, input frequency: 50 Hz, overall weight: 8,000 kg, total length: 4,500 mm, total width: 2,600 mm, total height: 2,100 mm, tool weight: 31,500 g, working length: 3,000 mm, VOLZ EURO-CUT 12 x 3050 sheet metal shear Nodpszkhywofx Ahkoda - Rated performance, sheet metal thickness, steel: 450 N/mm² - Sheet metal thickness: 12 mm - Max. speed: 88 mm/s feed rate Please note: the item must be picked up on a date to be determined between September 15 and September 17, 2026. FCA D-76474 Au am Rhein – loaded onto a truck.

Condition: used, Year of construction: 1967, Veneer shears Manufacturer: Hymmen Type: AS Year of manufacture: 1967 Technical data - 1-blade veneer shears Ndjdpfszuzqwsx Ahksa - Working width: 2800 mm - Package height: 80 mm - Depth: 800 mm Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 2006, - Max. cutting length: 2600 mm - Cutting widths: 45 - 350 mm - Opening of the pressure bar: 100 mm - Width of the pressure bar: 350 mm - Parallel stop with digital display: 25 - 1000 mm - Cutting angle approx.: 45 Veneer shears Manufacturer: Monguzzi, Carugate Type: AFD-35/2600 Year of manufacture: 2006 For clean, perfectly parallel and right-angled joining of veneer bundles in a single operation. Thanks to its high productivity, gentle handling of the raw material (no manual turning) and its precisely parallel cut, this guillotine is the perfect machine for preparing veneer strips for splicing. Production Up to 3 bundles/min Technical data Max. cutting length: 2600 mm Cutting widths: 45 - 350 mm Opening of the pressure bar: 100 mm Width of the pressure bar: 350 mm Parallel stop with digital display: 25 - 1000 mm Cutting angle approx.: 45 Features - Solid, robust construction with generously sized pressure bar and cutting table to accommodate the high clamping and shearing forces - Unique system with a fixed, solid cutting table and a movable pressure bar - Laser lights for precise visual identification of the cutting lines - High-quality hydraulic system with a large oil tank - Electrically driven parallel stop with quick adjustment - Industrial computer based on Windows, widescreen monitor and keyboard - Various operating modes and storable program sequences - Extensive recording of production data - Central lubrication unit Movable laser lines Nodpfx Aezuzpmshkeda For optimizing veneer yield. The manually operated laser line for the position of the front knife can be quickly adjusted. The veneer width is transmitted to the computer at the touch of a button. The cutting process then starts automatically. Note: The technical data and descriptions are a transcript of the order confirmation from that time. Data is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 1988, 1 used hydraulic sheet metal shearing machine Manufacturer: LVD Type: HSL 31/6 Year of manufacture: 1988 Technical data: Max. cutting length: 3100 mm Max. sheet thickness in ST 45: 6 mm Adjustable cutting angle: 0.5 - 3 mm Motor power: 7.5 kW Supply voltage: 380 V Length: 3500 mm Depth: 2200 mm Nodpfxjzv D Eyo Ahksda Height: 2250 mm Weight: 4600 kg Equipped with: Rear stop, motor-adjustable up to 750 mm Angle stop Foot switch

Condition: like new (used), Year of construction: 2020, As good as new plate shear from Ermaksan. Type CNC HGS 3100 6 Cybelec CybTouch 8 control system Safety guard Njdpfx Ahozunrhoksda Rear support table

Condition: used, Sacma cutting and slitting line: •Manufacturer of the line: Sacma S.R.L., Italy, Vigevano (PV) •Year of manufacture: 1975 •Electrical power: Voltage 400 V ± 10% - 50 Hz frequency •Compressed air: Pressure min/max 4.5 - 6 bar •Cycle time: Maximum unwinding speed is 12 m/min •Dimensions of the line: Length 23.5 m; width 4.8 m •Width of the coil: Min 300 mm / max 1280 mm (maximum coil weight 12 tons) •Length of the sheet: Min 450 mm / max 3000 mm •Material thickness: 0.4 - 1.0 mm Nsdpjzumm Djfx Ahkjda

Condition: used, functionality: fully functional, Year of construction: 2005, control type: manual, degree of automation: manual, actuation type: mechanical, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness steel (max.): 5 mm, sheet thickness stainless steel (max.): 3 mm, overall weight: 13,200 kg, Equipment: emergency stop, finger protection, type plate available, - Model: CM 4005 - Year of manufacture: 2005 - Condition: used - Technical data: Weight 13,200 kg, Cutting length 4,050 mm, Blade length 4,200 mm, Working area 4,200 mm, Material thickness: Steel 5.0 mm, Aluminum 6.0 mm, Stainless steel 3.0 mm - Advantages: - High precision and reliability Nedpozik E Tofx Ahkeda - User-friendly operation - Low maintenance and durable We offer a Colgar CM 4005 mechanical plate shear from 2005 for sale. The machine is designed for precise cuts with a cutting length of 4,050 mm and a blade length of 4,200 mm, and it allows for a working area of up to 4,200 mm. With a weight of approximately 13,200 kg, the shear is characterized by its robust industrial design. The Colgar CM 4005 is suitable for cutting various materials, including steel up to 5.0 mm thick, aluminum up to 6.0 mm thick, and stainless steel up to 3.0 mm thick. Several yellow clamping fingers along the cutting edge secure the material during operation. The front of the machine features a metal table with attached metal bars. The user-friendly control panel is equipped with a digital display and several colored buttons, including an emergency stop switch. Currently, "MANUAL 9.18" is displayed, which indicates the manual operating mode. The shear is painted blue and clearly displays the COLGAR logo. Signs of use, such as paint chips and superficial dirt, are present and correspond to the usual condition. These do not appear to affect the structural components but should be considered when assessing the machine. Overall, the Colgar CM 4005 mechanical plate shear offers high precision and reliability in a robust design that is suitable for a variety of metalworking applications. It is a low-maintenance machine for industrial use that combines a solid construction with practical features to increase operational efficiency. The following description is for guidance only and may not reflect all specifications or conditions. Please contact us if you require accurate or confirmed details. “The machine is sold in accordance with Incoterms® 2020 EXW [Frankenweg 2, 9100 Völkermarkt]. Once the machine is made available at the designated location, the buyer bears all costs and risks, including loading, transport and customs formalities.”

Condition: ready for operation (used), Year of construction: 1982, Available immediately, ex works: Shearing machine, Schröder Capacity: 2500 x 4 mm Cutting length: 2550 mm Material thickness: up to 4 mm Electric back gauge: 1000 mm Drive power: 5.5 kW Nedpfxszvwb Io Ahkeda Weight: 3.5 tons Price: EUR 4,750.00 plus VAT, ex works

Condition: ready for operation (used), Year of construction: 1981, Immediately available ex works: Hydraulic guillotine shear Köllschen Model BSH 2000/12.5 Year of manufacture: 1981 Cutting length: 2050 mm Material thickness: up to 12.5 mm Motorized backgauge: 5 – 1000 mm Ndodpfezvwbnjx Ahkoa Drive power: 15 kW Weight: 11 t Price: EUR 3,000 plus VAT ex location

Condition: good (used), Year of construction: 1995, overall weight: 4,500 kg, High-quality veneer shears with 2 blades for optimal joint cutting. Maximum processing length: 2600 mm. CE marked. Ndedpfjzvvffex Ahkoa

Condition: good (used), functionality: fully functional, working width: 2,050 mm, sheet thickness (max.): 10 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 8 mm, back gauge adjustment: motor-driven, power: 9 kW (12.24 HP), input voltage: 380 V, input frequency: 50 Hz, overall weight: 8,500 kg, total length: 2,600 mm, Equipment: angle stop, emergency stop, foot remote control, Well-maintained Promecam GH1020 shear. Cutting length 2050 mm and 10 mm steel capacity! Can be inspected by prior arrangement. Njdpfxjzvhkto Ahkjda

Condition: good (used), functionality: fully functional, RAS: Cutting length 1040 mm Nedozvcbaepfx Ahkjda Sheet metal thickness in steel: 2.5 mm Sheet metal thickness in stainless steel (700 N): 1.5 mm Back gauge distance: up to 550 mm .....FASTI: Capacity 1020 x 2 mm with pneumatic weight compensation for the bending arms and with finger stop Package price: EUR 4,900.00 net

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Additional information - Specification - Back stop Nedpfjzvb Dtsx Ahksda - Roll shelf

Condition: good (used), Year of construction: 1983, Sheet metal width: 6200 mm Sheet metal thickness: 8 mm Overhang: 60 mm Stand spacing: 6400 mm Cutting angle adjustment: 0.5 to 2° Total power requirement: 13 kW Machine weight (approx.): 19 t Ndsdpfezvb A Aox Ahkja

Condition: not inspected (used), Hydraulic guillotine shear Ndsdoyv Dmyspfx Ahkja Cutting length: 3150 mm for steel ST 37 up to 8 mm thickness

Condition: good (used), Year of construction: 1995, For sale is a good used guillotine shear from LVD. This machine was produced in Germany in 1995. guillotine shear LVD HST - C 40/6 Manufacturer: LVD Type: HST - C 40/6 Cutting capacity in steel 6,35 mm Maximum length 4050 mm Cutting angle 0.5 to 2 ° Cadence 10 to 45 strokes / min 7.5 kW motor Nodozty E Depfx Ahksda Weight 9500 kg