Used Froriep for sale (16)

Condition: used, Year of construction: 1961, turning diameter Max. 4200 mm faceplate diameter 3700 mm turning height Max. 2600 mm workpiece weight Max. 35 t Power 80 PS DIGITAL CONTROL DISPLAY Ncodpfx Asuddnvod Nol Largest diameter with the crossbeam supports: 4200mm Largest turning diameter with side support: 3900mm Largest turning height above faceplate: 2500 Side support 1 vertical grinding ram: 1200mm stroke (out of operation) 1 turning ram: 1400mm stroke

Condition: used, Year of construction: 1977, faceplate diameter 2500 mm swing diameter 2700 mm turning height 2000 mm Nsdpeuddpgefx Ad Nocl cross rail - adjustment 1500 mm workpiece weight max. 20.000 kg total power requirement 71 kW Control Siemens Sinumerik 840 Single-column vertical lathe 2000 x 2000mm Retrofit: 1997 Gr. turning diameter: 2700mm Gr. distance f. face plate to bottom of toolholder: 2150mm chisel holder: 2150mm Support swivelling up to 30° Chisel cross-section: 240x240mm small plunging diameter: 300mm Special equipment: Re-moulding, taper turning, thread cutting, constant cutting speed

Condition: used, Year of construction: 1970, diameter / mm Cutting (quantity) / weight / kg This tailstock comes from the Froriep D1.050x10.000 crankshaft lathe. This is sold individually and can be used for various purposes Can be used, for example as a counter spindle or for other purposes. Ncodpfxotnmmbo Ad Nol Center height: 500 mm

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / Nsdpfx Adsxgu R Ij Necl Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces A specialised machine package is available for sale – two perfectly matched systems for the complete machining of long, heavy workpieces with the highest demands on precision and efficiency. MACHINE 1 Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, Ncsdpfx Adouddimj Njl steering ring MACHINE 2 Irle machine – high-precision finishing Power: 129 kW Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing diameter over bed: 1,250 mm Clamping range of steady rests: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outer diameter: 850 mm With up to 50,000 Nm torque, perfect for smooth drilling, honing and demanding finishing processes. Your advantages at a glance - Complete solution from a single source – from pre-drilling to finishing - Large workpieces up to 11 metres and 10 tonnes in weight - High process reliability thanks to perfect machine synchronisation - Ready for immediate use, well maintained and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics and large parts manufacturing

Condition: used, Year of construction: 1980, turning diameter 7000 mm faceplate diameter 3500 mm workpiece height 3000 mm 160 mm 1998 Nedpfouddlzsx Ad Necl Control Siemens 840 C max. table load 60000 kg electr. connected load 400 V Serial number 11 33 0051 total power requirement 71 kW weight of the machine ca. / t required space 13 x 6 m The SCHIESS-FRORIEP 40 DV is a vertical lathe built in 1980. The machine was modernized and improved in 1998. Among other things, a driven tool system (C-axis) was installed. In addition, the control system was modernized to SIEMENS 840 C. The large open-sided vertical boring mills with travelling column - type DV - are particularly suited to situations where likely workpieces frequently change in diameter but where maximum workpiece dimensions are rare. Decisions in favour of this type of machine are generally due to minimum floor space requirement, universal adaptability and economical advantages. The modern design of these machines is characterized by rigid all-steel construction optimized by computer - SCHIESS can claim to have done much valuable pioneering work in this area of heavy-duty machine tool building.

Condition: used, x-axis / mm y-axis / mm z-axis / mm The boring mill is sold without clamping plates – the price refers exclusively to the boring mill. Technical data Horizontal milling and drilling machine with support sleeve Working range Vertical adjustment of the headstock from the clamping surface: 0 - 3000 mm Horizontal adjustment of the column: 7000 mm Maximum drilling depth with drill spindle alone: 1200 mm Maximum drilling depth with drill spindle and support sleeve together: 1300 mm Drill spindle diameter: 150 mm Milling spindle diameter: 240 mm Support sleeve diameter: 390 mm Support sleeve extension: 700 mm Drill spindle tool holder: ISO 50 Maximum workpiece weight: 70,000 kg When placed in 4 prisms: 95,000 kg Main drive Total speed range, adjustable from 2 - 795 rpm Series 1 2 - 50.4 rpm Series 2 50.4 - 126 rpm Series 3 126 - 314 rpm Series 4 314 - 795 rpm Maximum drive power at rated speed 17.5 80 kW Quick adjustment speed of spindle box and column 1800 mm/min Rapid adjustment speed of drill spindle and support sleeve 1400 mm/min Fine adjustment speed of spindle box and column medium 75 mm/min Fine 3 mm/min Fine adjustment speed of drill spindle and support sleeve Medium 57.7 mm/min Fine 2.5 mm/min Feed of headstock and column for milling Row 1 3 - 75 mm/min Row 2 72 - 1800 mm/min Feed of drill spindle for drilling Row 1 0.19 - 4.7 mm/min Row 2 2.2 - 56 mm/min Row 3 56 - 1400 mm/min Special equipment Numerical length measuring device in horizontal and vertical directions Accuracy 0.01 mm Rotatable and movable clamping table, Collet & Engelhard, Offenbach Model Tdvmf 1.6 (for technical data, see ‘Clamping table’) Rotatable and movable clamping table from Scharmann, Rheydt Model DAV 1600 Rotatable and movable clamping table from Froriep, Rheydt Swivel crane for tool change, maximum load capacity 500 kg Special tools Carbide core drill bits for extracting core samples Universal facing and boring head from Wohlhaupter, Frickenhausen Model UPA7, with the following specifications: 1 division of the fine adjustment 0.01 mm in diameter 1 revolution of the fine adjustment 0.5 mm in diameter Facing and boring range 0 - 1250 mm Maximum slide adjustment 210 mm Automatic slide feed in mm/rev during facing 0.05 - 0.10 - 0.15 - 0.20 - 0.25 - 0.30 - 0.35 - 0.40 - 0.45 - 0.50 - 0.55 - Quick adjustment per revolution of the quick adjustment spindle 6 mm in diameter Ncedpexdnrajfx Ad Nsl Largest diameter of the slide at zero position corresponds to the smallest drilling diameter of 323 mm Head height without shaft 260 mm

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, Rotary and sliding table / Brand: FRORIEP / Type: 40 TDV Year of construction: 1962, Complete overhaul / Modernization: 2024 Scope of the complete overhaul in 2024: New control cabinet with new motors and components (Siemens). The table can be inspected under power by appointment. Condition: Fully operational (no defects). TECHNICAL DATA: - Control: Siemens - Table clamping surface: 3.200 x 3.200 mm - Table-moving device: 1.750 mm - Table load max.: 40 tons - Table rotation: 360° (endlessly), table slide movement - Drive power: 11 kW Detailed technical data sheet and information on equipment available on request. Nsdpsx Ncn Aofx Ad Njcl There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale.

Condition: like new (used), Year of construction: 2026, TECHNICAL DATA: Machining diameter 2000mm Max. workpiece height 1200mm Max. workpiece weight 8000kg Faceplate diameter 1800mm Faceplate speed range/4 automatic steps 0-210rpm Max. faceplate torque 31500Nm Main drive power 55kW EQUIPMENT: -4-station turret or quill support with 2 Capto clamping units -Central lubrication SKF/VOGEL -Commissioning including training -12-month warranty -Complete electrical equipment 230/400V, 50Hz, Made in Germany, CE standard OPTIONS: -Tool holders -Tool change system (10 stations) -Machine enclosure -Chip conveyor -Cooling water preparation -Side support -Machine version with quill and 2x Capto C6 -... CONTROL: CNC cycle control Fagor 8037TC/8055TC* or Siemens OTHER: CE Declaration of Conformity Geometry approval according to DIN 8609-2 Nodpfxof S Hcyj Ad Nocl

Year of construction: 1962, condition: ready for operation (used), A heavy-duty rotary table is offered that was completely overhauled in 2024. Control cabinet: new, motors/components: new, table size X/Y: 3200mm/3200mm, max. table load: 40000kg. Travel distance table slide: 1750mm. Control: Siemens, measuring systems: Heidenhain, control cabinet in transport fixture, regularly maintained, documentation: original plans, wiring diagrams 2024, terminal plan, operating manual, machine weight: approx. 30000kg. Inspection is possible by arrangement. Ncsdpfx Aex I Rraod Njl

Condition: used, Year of construction: 1970, functionality: fully functional, turning height: 4,000 mm, workpiece weight (max.): 100,000 kg, turning diameter: 17,000 mm, Universal 5-axis machine (turning & milling) Froriep 40KE 500/600-400 Spheromill Technical Data Year of manufacture: 1970 – modernised in 1984 and 2006 Control: Siemens 840D Nodpfoxbbfnjx Ad Nscl Milling length (X-axis): 8,500 mm Maximum working height (Z-axis): 4,000 mm Max. swing diameter: 17,000 mm Table diameter: 5,000 mm Ram adjustment: -15° to +90° Table speed: up to 40 rpm (100 kW drive) Maximum table load: 100 t Accessories & Equipment Milling head: 800 rpm / 60 kW Universal milling head: 630 rpm Facing slide up to Ø 1,000 mm Grinding attachment 90° angle head (630 rpm) Small 90° angle head (450 rpm)

Year of construction: 1987, condition: ready for operation (used), A CNC travelling column boring and milling machine Schiess is available. Travel X/Y/Z: 10500mm/5000mm/1200mm, quill stroke: 1250mm, quill diameter: 225mm, speed: 750rpm, spindle power: 100kW, spindle torque: 18000Nm, tool holder: SK50/SK60. Machine dimensions: approx. 17000mm/11000mm/8400mm, controls: Siemens 850M. Without platen field. Documentation available. An on-site inspection is possible. Ncedpfx Adoxrf Ibs Nol

Condition: good (used), Make: SCHIESS FRORIEP Type: DV 45 Year: 1980 Specifications Metric US Standard Table Length 3000 mm Table Width 3000 mm Table load 40000 Movement V-axis 1600 mm Nedpsku Aalefx Ad Necl Rotation B-Axis 360000 ° Rotation speed B-Axis 100 Grad/Min Omw/min. Movement speed V-axis 4500 mm/min. Dimensions (Estimate) Length 5320 mm Width 3000 mm Height 1080 mm Weight 24000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1976, functionality: fully functional, machine/vehicle number: 4218/ 12035, Axis height over bed: 1500 mm Speed: 0 - 315 rpm Range of diameters and length of drilling on one side:. D 35 – 45 mm L = 4000 mm D 46 – 65 mm L = 6000 mm D 66 – 85 mm L = 8000 mm Nedpowqk Umefx Ad Necl D 86 – 105 mm L = 12,000 mm D 106 – 125 mm L = 16,000 mm D 126 – 200 mm L = 24,500 mm D 201 – 250 mm L = 24,500 mm D 251 – 555 mm L = 18,000 mm

Condition: used, Year of construction: 1975, functionality: fully functional, machine/vehicle number: 4159, Maximum machining diameters: 4000 mm / 3500 mm (clamping plate) Clamping plate speed: max. 80 rpm Nsdpfx Aswqld Njd Nscl Maximum workpiece height: 2000 mm Main drive power: 55 Kw Note grinding equipment Maximum workpiece weight: 40t Regular service and maintenance

Year of construction: 1955, condition: ready for operation (used), A Froriep horizontal vertical lathe that was completely overhauled in 2009 is available. Faceplate diameter: 1250mm, turning height: 1100mm, circulation diameter over bed: 1400mm, power: 38kW, container volume: 1000l, control: Siemens S7. The machine has undergone extensive mechanical and electrical overhauls, including a new lubrication and cooling system and a new paint job. Documentation available. On-site inspection is possible. Ncsdpfxsu S I E Ie Ad Nel