Used Guillotine Shears for sale (1,694)

Condition: ready for operation (used), sheet thickness steel (max.): 10 mm, back gauge: 1,000 mm, power: 21 kW (28.55 HP), total length: 4,330 mm, total width: 2,200 mm, total height: 2,110 mm, empty load weight: 10,000 kg, workpiece length (max.): 3,100 mm, CNC Siemens achteraanslag en snijhoekverstelling 2 voorste steunpunten van 3 meter Handmatige afstelling van de messpeling Instapbeveiliging aan de achterzijde Strokes/min: 9 > 40 str/min Adjustable cutting device: 0,1 > 1,5 mm Backgauge: 1000 mm Siemens Hfsdsv Taiaspfx Ah Njb Adjustable cuttingedge: 0,5° > 2,5° Courant needed: 380V Number of sheet holders: 17x

Condition: good (used), Year of construction: 1995, Sheet width 6500 mm Hfsdeidx H Ajpfx Ah Neb sheet thickness 3 mm backgauge - adjustable 1000 mm weight approx. 15000 kg dimensions 7500 x 3000 x 2500 mm

Condition: good (used), Year of construction: 2001, machine/vehicle number: 122019, Offer 25507 Technical data: Hedex S Ed Espfx Ah Njfb - Max. working width: 2520 mm - Max. material thickness: 2.0 mm - Cutting angle: 2.2° - Stroke rate up to: 25 strokes/min - Backgauge with ELGO position control up to 750 mm - Table height: 850 mm - Front angle gauge: 2000 mm - 2 front support arms: 1000 mm - Pneumatically assisted sheet support - Electric foot pedal - Single or repeat stroke selectable - Rear safety guard - Drive: 400 V / 3 kW - Space requirements: approx. W 3450 x H 1150 x D 2200 mm - Weight: approx. 1600 kg

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic guillotine shears SMO-3204-N QC12Y 4x3200 Specifications - Maximum cutting thickness (S235): up to 4.0 mm - Maximum cutting length: 3200 mm - Blade inclination angle: 1.5° - Strokes per minute: 8 - 12 - Backgauge travel distance: 600 mm - Motor power output: 5.5 kW - Length: 3950 mm - Width: 1670 mm - Height: 1800 mm - Weight: 4200.0 kg Equipment and features - Backgauge equipped with ball screws and driven by the electric motor - Hydraulic hold-downs to clamp the sheet over the entire cut length. - Blade clearance adjustment - Ball transfer units on the worktable - Work lighting - Front supports - Mobile foot switch Rear chute The rear chute is equipped with ball transfer units to slide smoothly away from the shear after cutting. E21S control (Mounted on a swivel arm on the left-hand side of the machine.) - Motorized backgauge - Capable of storing 40 programs, with up to 25 different steps each. - Retract function - Single-click parameter saving - Parameter memory in the event of power failure Top quality components - Rexroth hydraulic valve - Siemens-licensed main motor - Schneider electrical components Steel hydraulic line tubings Hydraulic lines made of steel instead of rubber reduce the risk of future leaks. Ergonomics The operator can work freely throughout the machine's working area thanks to the mobile foot switch and the controller on the swivel arm. Additional LED lighting and laser indicator ensure a comfortable view of the workpieces in any situation. Safety We attach great importance to the safety of our Clients, therefore we equip our shears with visible safety labels, rear light curtains and easily accessible safety switches. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Oil cooling system The Oil Cooling System guarantees the stability of the machine's performance even after long, continuous operation. Pressure Control System Hedovvuitspfx Ah Nefb PCS ensures blade reliability for years to come. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials The remaining time can be checked in the Otinus Customer Panel.

Condition: used, functionality: fully functional, Year of construction: 1980, control type: NC control, actuation type: hydraulic, working width: 3,100 mm, sheet thickness (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, input voltage: 380 V, input frequency: 50 Hz, overall weight: 19,000 kg, total length: 4,500 mm, total width: 3,200 mm, total height: 2,900 mm, number of support arms: 2, We are offering a reliable LVD Hydraulic Shear, Model MG-31/16-20, at a very attractive price. Hfjdpfx Asxg I T Neh Njb Key specifications: • Cutting capacity: Up to 20 mm • Year of manufacture: 1980 • Weight: 19,000 kg • Transport dimensions: 2350 x 4300 mm, height 2900 mm • Location: Slovenia This is a solid, proven machine that’s ready for heavy-duty use.

Condition: excellent (used), Schechtl SMT 250 guillotine shear Hedpox N Hwzefx Ah Nefb - Capacity: 2.0 mm steel sheet (greater for aluminum, copper, and zinc) - Working length: 2540 mm - With rear gauge - With foot pedal

Condition: ready for operation (used), sheet thickness steel (max.): 20 mm, back gauge: 1,000 mm, power: 33 kW (44.87 HP), empty load weight: 20,000 kg, workpiece length (max.): 3,100 mm, throat depth: 150 mm, fully automatic shear, heavy duty shear for cutting high alloy steel, stainless steel with no torsion touchscreen CNC control: - cnc controlled backgauge - cnc controlled blade gap - cnc controlled cutting angle foldable backgauge TOP Belgian quality shear Hfjdpfsx Imnksx Ah Nob Strokes/min: 9 > 30 str/min Adjustable cutting device: 0,05 > 1,3 Adjustable cuttingedge: 0,2 > 2,5° Number of sheet holders: 16x

Condition: good (used), Year of construction: 1991, Sheet width 2500 mm Sheet thickness 4 mm Cutting angle 1.49 ° Strokes per minute 40-80 Stand projection 200 mm Number of hold-down devices 13 pieces Hodpfxstq S T No Ah Nsfb Backgauge - adjustable 5-1000 mm Table height 750 mm Oil capacity 85 l Air pressure - required 5 bar Machine weight approx. 3600 kg

Condition: good (used), Poma LS 1300 rotary bookbinding shears Production in Germany. Shears in good condition, ready for production. The construction made entirely of cast iron ensures rigidity and repeatability of cutting. Cutting width approx. 1300mm Ideal for bookbinding cardboard. Side margin. The machine has a feeder. 8 sets of knives Weight 1500kg Hedpfx Ahswt Suao Nsfb

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic guillotine shears SMO-3106-N Cybelec CybTouch 8 Specifications - Maximum cutting thickness (S235): up to 6.0 mm - Maximum cutting length: 3200 mm - Blade inclination angle: 1.5° - Strokes per minute: 14 - Backgauge travel distance: 600 mm - Motor power output: 7.5 kW - Length: 3900 mm - Width: 1600 mm - Height: 1740 mm - Weight: 5200.0 kg Equipment and features - Backgauge equipped with ball screws and driven by the electric motor - Hydraulic hold-downs to clamp the sheet over the entire cut length. - Blade clearance adjustment - Ball transfer units on the worktable - Work lighting - Front supports - Mobile foot switch Rear chute The rear chute is equipped with ball transfer units to slide smoothly away from the shear after cutting. CybTouch 8w control (Mounted on a swivel arm on the left-hand side of the machine.) - Parameter setting based on material specifications - Automatic clearance setting - Automatic correction for backgauge positioning - Backgauge retract movement to avoid bending of material Hfedpfx Ahovhclms Nsb - Supports that cover ⅔ of the standard size material - Support for RTS - the handover of the cut material to the user - Support for the motorized backgauge - Docking position - Hold-down pressure on sheet management - Hydraulic pressure management - Saving long cut sequences and programming in live colors - Clear page layout with large buttons on the easy-to-read screen that displays all the data an operator needs. - Very intuitive and operator-friendly user-interface - Few-second programming a part sequence - Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials The remaining time can be checked in the Otinus Customer Panel.

Condition: new, functionality: fully functional, Year of construction: 2026, Technical specifications: Working length: 4040 mm Total length: 4858 mm Depth: 2592 mm Working height: 920 mm Total height: 1430 mm Weight: 3450 kg Maximum thickness of material to be cut: Steel: 2.5 mm Aluminum: 4.00 mm Stainless steel: 1.5 mm Standard equipment: ▪ Mechanical backgauge with a range of 0 - 750 mm and a pneumatic sheet support system, with front or rear material return ▪ Required compressed air connection: min. 6 bar ▪ Four 1000 mm front support arms with T-slots and metric scale ▪ Two front sheet supports, as right-angle bars on the left and right side of the machine, with T-slots and metric scale ▪ Blade gap adjustment with scale ▪ Controller with digital readout (memory for up to 99 six-step programs) Hfjdpfxsx Hykvj Ah Njb ▪ Robust steel welded machine frame. Guides and bearings are maintenance-free. ▪ Foot pedal operation ▪ CE certificate Advantages: Fast return, high cutting capacity Robust steel welded machine frame Maintenance-free guides and bearings.

Condition: excellent (used), functionality: fully functional, Performance: 1000 x 3.5 mm; light barrier, - electric foot switch - left side stop 600 mm, two supports each 600 mm Hfodpfox Hqurex Ah Neb - central lubrication - Ortlinghaus brake-clutch combination - switchable between high holding position or as a tilting roller table .

Condition: ready for operation (used), sheet thickness steel (max.): 13 mm, back gauge: 1,000 mm, power: 17 kW (23.11 HP), total length: 4,400 mm, total width: 2,200 mm, total height: 2,205 mm, empty load weight: 10,500 kg, workpiece length (max.): 3,100 mm, cnc backgauge Hfsdpfxsx Immgo Ah Neb cnc cutting angle cnc knife play CNC ELGO Strokes/min: 11 > 40 str/min Adjustable cuttingedge: 0,5° > 2,5°

Condition: used, Max height: 2000mm Max diameter: 6mm Hedpovpfp Dofx Ah Nefb

Condition: good (used), Stop for press brake, bending machine, guillotine shears... Hfedpfx Aoxf Dmcsh Nsb -Stop bar: from Atlantic ATS 3006 guillotine shear, without drive motor -Stop length: 2670 mm -Travel: 800 mm -Accessories: see photos -Transport dimensions: 2670/1050/H320 mm -Weight 186 kg

Condition: new, Year of construction: 2025, – Capacity 1050 x 1.5 mm Hfodsxai Stepfx Ah Nsb – Backgauge 600 mm – Table size 600 x 1315 mm – Weight 350 kg

Condition: new, Year of construction: 2026, Quick reverse movement, high cutting capacity with low power Strong steel welded frame structure Maintenance-free guides and bearings. Operating pedal, safety buttons Front material support up to 920 mm 5m 32Amp cable to power the machine CE certificate Automatic stop with digital position readout, length 0 - 750 mm with pneumatic sheet support system with rear material pick-up compressed air connection required min. 6 bar Hfjdpol Exypjfx Ah Nob

Condition: used, Year of construction: 2010, working width: 2,500 mm, sheet thickness steel (max.): 15 mm, Equipment: foot remote control, Electric guillotine Schroder with mechanical back rest. Recently serviced. Knives in good condition. Guillotine fully functional, can be tested. Hfodpfswq Dqhjx Ah Njb Specification: Model: Schroder MHSU Year: 2010 Made in: Germany Working length: 2 500 mm Max cutting thickness: 1.5 mm Back rest: mechanical Weight: 1260 kg

Condition: ready for operation (used), sheet thickness steel (max.): 13 mm, power: 21 kW (28.55 HP), total length: 5,500 mm, total width: 2,380 mm, total height: 2,195 mm, empty load weight: 17,500 kg, workpiece length (max.): 4,100 mm, CNC-hoekregeling CNC-messpeling CNC-achteraanslag met pneumatisch plaatondersteuningssysteem Hodpjx Eng Nofx Ah Njfb met transportband met schrootbak opvouwbare achteraanslag Strokes/min: 7 > 28 str/min Adjustable cutting device: 0,1 > 2,2 mm Backgauge: CNC - 1000 mm Adjustable cuttingedge: 0,5° > 2°

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, Capacity 1000 x 3.5 mm - electric foot switch - side stop left 600 mm, two supports each 600 mm Hedsxuwa Uopfx Ah Nsfb - central lubrication - Ortlinghaus brake-clutch combination - pneumatic tilting roller table or lifting with plastic rollers - rear stop area protected by light barrier - operating instructions

Condition: good (used), functionality: fully functional, Year of construction: 1991, This high-performance swing beam guillotine shear RAS 83.30 with ELGO NC backgauge and pneumatic sheet support unit comes from first ownership. Cutting capacity: 3190 x 2.5 mm Drive power: 5.5 kW Machine weight: 2800 kg Includes pneumatic sheet support unit, ELGO NC backgauge, 1 left-side squaring arm, and 3 additional support arms. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Hodpfx Aoxmi Dpjh Njfb

Condition: good (used), You are bidding here on a machine set from Schechtl with a capacity of 3mm. Machine Specifications: Schechtl MAB - Bending length: slightly over 2 meters - Sheet thickness: 3mm steel, more for aluminum - Optional: new boxed segment set; used set with significant wear is included free of charge (the machine was used in a training workshop) - Current new price: see pictures Hfedpfx Asxqmmioh Njb - Hand and foot operation - Optional: back gauge and additional rails Guillotine Shear MSB 200 - Cuts 3mm steel, significantly more for aluminum - Cutting length: slightly over 2 meters - Front gauge - Back gauge: 750 mm - Optional: sheet metal tray Free loading available New price for such a set is approx. €80,000 net (without accessories) You will receive an invoice with VAT shown Shipping can be arranged upon request Free loading as shown in the photos Inspection and test run available by appointment – please call 0175 248 1975. Payment in cash upon collection; if you need anything else, feel free to call me – thank you Collection should occur within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Item numbers: 251007 and 251008

Condition: ready for operation (used), sheet thickness steel (max.): 6 mm, back gauge: 750 mm, power: 7.5 kW (10.20 HP), total length: 3,880 mm, total width: 1,650 mm, total height: 1,700 mm, empty load weight: 4,500 kg, workpiece length (max.): 3,100 mm, SP9-besturing: CNC-gestuurde achteraanslag CNC-snijhoekverstelling Handmatige messpelingafstelling aan de voorzijde van de machine Inloopbeveiliging aan de achterzijde Strokes/min: 8 > 14 str/min Adjustable cuttingedge: 0,5 > 3° Number of sheet holders: 18x Hfedpjx End Isfx Ah Nsb

Condition: excellent (used), Year of construction: 1985, Cutting length 1030 mm Max. sheet thickness 2 mm Stroke rate approx. 67 / min Back stop 500 mm Table width 230 mm Working height 905 mm, can be lowered to 755 mm Motor power 3 kW Hsdpfjfpa Ihjx Ah Nsfb Machine dimensions L x W x H 1550 x 1300 (without support arms) x 1250 mm Weight 850 kg Accessories / Special features: • Rear, manually adjustable rack and pinion stop with measuring tape, length 500 mm • Front safety cord, electrically secured • 1 side stop on the right • 1 support arm • Geared brake motor • The working height is currently 905 mm. This can be lowered by 150 mm to 755 mm, as the machine's feet have been raised. • Manual central oil lubrication • Electric foot switch We have rotated the two knives to a new cutting edge and readjusted them. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), sheet thickness steel (max.): 20 mm, back gauge: 1,000 mm, power: 30 kW (40.79 HP), total length: 3,400 mm, total width: 3,900 mm, total height: 2,800 mm, empty load weight: 22,300 kg, workpiece length (max.): 3,100 mm, passage width: 3,400 mm, throat depth: 300 mm, digital readout for backgauge Hfjdpexpkilefx Ah Njb retractable backgauge Optional: upgrade to CNC control Strokes/min: 7 > 30 str/min Adjustable cuttingedge: 0,5 > 3°