Used Hydraulic Guillotine for sale (14,827)

Condition: good (used), Grafcut G73H Hydraulic Paper Cutting Guillotine Machine in very good condition. The machine was operated in a digital printing house, with low mileage. Description: • LCD touchscreen programmer (100 programs, each with 100 steps) • Hydraulic knife and pressure drive • PLC-controlled feed • Illuminated cutting line • Stainless steel-covered tables Bodpfx Ajx Hqnleafjcu • Additional manual knob for moving the feed beam • Mechanical foot pedal for pressure adjustment • Pressure force adjustment • Side tables • Photocells protecting the work area • Safety features: knife stop control at top dead center, two-handed operation, rear table guard • Air table • Quiet operation The machine is equipped with all safety devices and guards, and meets CE standards.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: 2107308, controller model: Elgo P40T, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, sheet thickness (max.): 13 mm, The machine was only in use for 3 years! The original price was €52,000! TECHNICAL DETAILS Working width: 3,100 mm Cutting angle (min.): 0.5° Cutting angle (max.): 3° Stroke rate (min.): 8 strokes/min Stroke rate (max.): 20 strokes/min Sheet thickness (max.): 13 mm Aluminum sheet thickness (max.): 10 mm Steel sheet thickness (max.): 13 mm Stainless steel sheet thickness (max.): 8 mm Back gauge adjustment: CNC controlled Back gauge: 1,000 mm MACHINE DETAILS Control: Elgo P40T Dimensions & Weight Total weight: 12,000 kg Dimensions (L x W x H): 4,000 x 2,200 x 2,100 mm Power: 22 kW Input voltage: 400 V Input current: 45 A Input frequency: 50 Hz Type of input current: Three-phase EQUIPMENT CE marking Bjdpfxjydc Nbo Aafocu Finger guard Foot remote control Emergency stop button Safety light curtain

Condition: used, functionality: fully functional, Year of construction: 1988, Hydraulic guillotine shear Manufacturer: LVD Model: HSL 31-6.35 Bodpfoygv Rkox Aafscu Year of manufacture: 1988 Technical Data Brand: LVD Model: HSL 31/6 Year of manufacture: 1988 Working length: 3100 mm Sheet thickness: 6.35 mm Dimensions: L 4.0 x W 1.7 (plus support arms) x H 1.80 m Weight: 4.6 t Equipment - Motorized backgauge 740 mm - Angle stop - Support arm - Manual cutting angle adjustment - Manual blade gap adjustment - Electrical diagram All information provided without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), functionality: fully functional, Year of construction: 2000, Used Safan guillotine shear Bedpfx Aajyglr Refscu Type HT 310-6 TS Capacity: 3100 x 6 mm Electrically adjustable backgauge, blade gap and cutting angle adjustment Equipped with pneumatic rear support table

Condition: good (used), Year of construction: 2001, LVD guillotine shear 3100 x 6 mm, thin sheet support, motorized back gauge and square arm, Siemens Simatic OP7 CNC, year 2001 Bcjdpfx Aoyf A A Doafsu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, sheet thickness (max.): 4 mm, COLGAR 253 guillotine shear, operational, with rear gauge up to max. 700 mm. Bedpfxsygvptj Aafjcu

Condition: excellent (used), functionality: fully functional, Year of construction: 1987, control type: manual, degree of automation: manual, actuation type: hydraulic, working width: 3,050 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, stroke rate (min.): 9 1/min, stroke rate (max.): 17 1/min, sheet thickness steel (max.): 6 mm, back gauge adjustment: motor-driven, back gauge: 750 mm, power: 7.5 kW (10.20 HP), input voltage: 380 V, type of input current: three-phase, overall weight: 4,500 kg, total length: 322 mm, total width: 157 mm, total height: 158 mm, year of last overhaul: 2025, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, ❇️ ATLANTIC ATS 3006 Hydraulic Guillotine Shear – 3050 mm / up to 6 mm steel – excellent condition – UVV safety inspected – fully operational For sale is an ATLANTIC ATS 3006 hydraulic guillotine shear in excellent, well-maintained condition. The machine is currently still in use, fully operational, and has a valid UVV/safety inspection certificate (see photos). An inspection, including a technical functionality test, is possible at any time by appointment. ⸻ ❇️ Technical Data: • Manufacturer: ATLANTIC • Model: ATS 3006 • Machine type: Hydraulic guillotine shear • Max. cutting length: approx. 3,050 mm • Max. cutting capacity: approx. 6 mm steel (400 N/mm²) • Cutting angle: adjustable (typically approx. 0.5° – 3°) • Blade clearance: manually adjustable • Backgauge: motorized (travel distance depending on equipment, typically up to approx. 750 mm) • Hydraulic hold-downs: multiple units • Strokes: approx. 9–17 strokes/minute (depending on material & angle) • Motor power: approx. 7.5 kW • Connection: 400 V • Machine weight: approx. 4,500 – 5,000 kg • Year of manufacture: 1987 All information is without guarantee – on-site functionality tests are possible and expressly encouraged. ⸻ ❇️ Dimensions: • Approx. L 322 cm x H 158 cm x W 157 cm (or 218 cm including extension for sheet cutting/wooden board) ⸻ ❇️ Condition • Excellent, well-maintained condition – fully functional • In continual operational use • Valid UVV/safety inspection certificate • Hydraulic and mechanical systems clean • Immediately ready for use ⸻ ❇️ Sale & Transaction • Invoice with VAT shown can be provided • Collection/transport by the buyer (weight ~5 t) – delivery may be possible at additional cost • Location: 72229 Rohrdorf • Loading facility (workshop crane) available on site ✅ Price • 8,490 euros (net) plus 19% VAT Bcodpfx Aasx N Ethsfeu ⚠️ I am offering additional workshop accessories and metalworking tools for sale in my other listings.

Condition: excellent (used), functionality: fully functional, Cutting Length 6100mm Cutting Capacity 25mm Bcsdpfx Asygd Aujafeu Angle 0.5-2.5 Strokes per minute 3-5. Number of hold downs 36 Blade gap 0.005-3.00 Throat Depth 500mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, control type: CNC control, actuation type: electric, working width: 4,000 mm, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness steel (max.): 4 mm, input voltage: 380 V, input frequency: 50 Hz, total width: 4,300 mm, total height: 1,800 mm, number of support arms: 2, year of last overhaul: 2026, Equipment: documentation/manual, type plate available, SCHIAVI-AMADA GH540A guillotine shear, fully operational and ready for use, complete with sheet metal evacuator and programmable positioner ENC1 TASK. Bcedpfxeyf H Uwo Aafou

Condition: good (used), functionality: fully functional, Year of construction: 2009, Expected in approx. 1 month: Used 4-meter CNC guillotine shear by Safan Model: M Shear 430 6 Capacity: 4300 x 6 mm High hold-down system Return to sender system Year of manufacture: 2009 Images shown are of another identical machine. Bcsdpfxsycwals Aafsu

Condition: used, functionality: fully functional, Year of construction: 2014, Used 4-meter guillotine shear from Shandong Sanxin (China) Model: GS 4108 Capacity: 4100 x 8 mm Bcsdpfx Ajycv Uboafsu Electric back gauge with Delem control Weight: 7,400 kg Year of manufacture: 2014

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Bcodpfx Aajyfnp Njfsu Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Additional information - Specification - Back stop - Roll shelf

Condition: good (used), Year of construction: 2020, CNC ESA blade clearance adjustment via CNC, manual cutting angle adjustment, thin sheet support. Year 2020. Bedsyanqiopfx Aafjcu

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, working width: 1,500 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, power: 7.5 kW (10.20 HP), overall weight: 3,500 kg, total length: 2,200 mm, total width: 1,800 mm, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Hydraulic Guillotine Shear / Sheet Metal Shear Haco SST 150 / 4, year of manufacture 2006, Technical data and features: Cutting capacity 1500 mm x 4 mm, machine length 2200 mm, width 1800 mm, weight 3500 kg. Torsionally rigid, fully welded steel frame, stainless steel blades, stroke counter, independent hold-downs, cutting line illumination, softly padded hydraulic hold-downs. Option to increase cutting speed by reducing capacity, pre-selection control for positioning the backgauge to the desired position, 1-meter angle stop with T-slot scale and a swivel stop, complete cutting table with T-slots at 1500 mm and 2000 mm, motorized swiveling backgauge with adjustment via front control panel, 650 mm stroke, etc. Bcsdpfxeydfhmo Aafeu The machine comes from a government institution and is in top condition! Please see the photos! The machine is incoming, more photos will follow.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 3100 mm Range back gauge 1000 mm Min. cutting angle 0.5 ° Max. cutting angle 3.5 ° Number of sheetholders 17 Min. number of strokes/min. 6 Max. number of strokes/min 30 Min. blade clearance 0.1 mm electric powerd back guage with elgo "go-to" controller plate following system at back guage Bcjdpfx Aeyag Uasafeu

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, Hydraulic guillotine shear HACO HS 4013 capacity : 4000mm x 13mm Bcjdjyag Tiopfx Aafju electric powered back guage

Condition: good (used), functionality: fully functional, Year of construction: 1998, Used 3 meter guillotine shear from Ermaksan Model: MGM 3100 8 Capacity: 3100 x 8 mm Refurbished electric backgauge Bjdsyabqpspfx Aafocu Year of manufacture: 1998

Condition: used, Hydraulic Plate Shear LVD Type HST-C 31 / 6 Machine No. 21348 Year of manufacture: 1994 Cutting length: 3,100 mm Cutting thickness: 6.35 mm Backgauge: 770 mm Bsdpfx Aastvb Iuefecu Working height: 950 mm Hydraulic sheet hold-downs: 17 units Hydraulic tank capacity: 150 liters Motor power: 7.5 kW Power connection: 400 Volt, 50 Hz, 9.5 kW, 19 Amp. - Motorized backgauge with digital actual position display ELGO - Backgauge adjustment via push button – rapid in both directions and fine adjustment by jogging in the minus direction only - Sheet lifting device below the backgauge with pneumatic lifting cylinder - Continuously adjustable blade gap from 0.1 mm via handwheel with analog display - Cutting angle adjustment in 5 steps from 1.5° to 3.5°, electrically pre-selectable - Left side angle stop 1,500 mm - 2 table extensions as sheet supports - Electric foot switch - Comprehensive operating manual Space requirements without front table extension (L x W x H): 4,150 x 1,850 x 1,900 mm Space requirements with front table extension (L x W x H): 4,150 x 2,850 x 1,900 mm Weight: 5.5 tons Good condition Very good cutting results, including with thin sheet metal

Condition: good (used), functionality: fully functional, Year of construction: 1996, The machine is in good technical condition; inspection is possible by prior arrangement. Weight: 11,560 kg Bsdpfoych I Hex Aafocu Shearing length: max 4,050 mm Shearing thickness: max 6.3 mm

Condition: new, Year of construction: 2026, Hydraulic guillotine shears are advanced machines designed for precise cutting of metal sheets of various thicknesses and hardness. Thanks to the hydraulic drive, they provide high pressing force, enabling efficient processing of even the most demanding materials. Their solid construction and modern control systems ensure accuracy, repeatability, and safe operation. These machines are indispensable in industrial plants and workshops specializing in metal processing. Max. sheet thickness (S235): up to 12.0 mm Max. sheet length: 3200 mm Cutting angle: 2° Strokes per minute: 6–20 Back gauge travel: 600 mm Motor power: 15 kW Length: 4000 mm Bsdpfx Aaeych Imefocu Width: 2100 mm Height: 2100 mm Weight: 9500 kg Equipment: Rear gauge driven by electric motor (on ball screws) Hydraulic sheet clamps along the entire cutting length Adjustable blade gap Ball guides on the table for sheets Work area lighting Front supports Mobile foot controller The rear ramp is equipped with ball guides, ensuring smooth and precise movement of cut pieces. This prevents any material fragments from remaining on the machine, improving efficiency and safety. Using steel tubes in the hydraulic system instead of flexible rubber hoses significantly increases system tightness and minimizes the risk of leaks in the future. Thanks to their rigidity and resistance to mechanical damage, steel tubes provide durability and reliability of hydraulic connections. With the mobile controller and the control unit mounted on a movable arm, the operator has complete freedom of movement throughout the machine’s working area. Additional LED lighting and a laser indicator provide excellent visibility of the workpieces, enhancing precision and comfort under any working conditions.

Condition: new, Year of construction: 2026, Hydraulic guillotine shears are advanced machines designed for precise cutting of metal sheets of various thicknesses and hardness. Thanks to the hydraulic drive, they provide high pressing force, enabling efficient processing of even the most demanding materials. Their solid construction and modern control systems ensure accuracy, repeatability, and safe operation. These machines are indispensable in industrial plants and workshops specializing in metal processing. Technical specifications Max. sheet thickness (S235): up to 8.0 mm Max. sheet length: 3200 mm Cutting angle: 1.5° Strokes per minute: 10–15 Back gauge travel: 600 mm Motor power: 11 kW Length: 4300 mm Width: 2000 mm Height: 2100 mm Weight: 6400 kg Bcodoych Iaspfx Aafsu Equipment: Rear gauge driven by electric motor (on ball screws) Hydraulic sheet clamps along the entire cutting length Adjustable blade gap Ball guides on the table for sheets Work area lighting Front supports Mobile foot controller The rear ramp is equipped with ball guides, ensuring smooth and precise movement of cut pieces. This prevents any material fragments from remaining on the machine, improving efficiency and safety. Using steel tubes in the hydraulic system instead of flexible rubber hoses significantly increases system tightness and minimizes the risk of leaks in the future. Thanks to their rigidity and resistance to mechanical damage, steel tubes provide durability and reliability of hydraulic connections. With the mobile controller and the control unit mounted on a movable arm, the operator has complete freedom of movement throughout the machine’s working area. Additional LED lighting and a laser indicator provide excellent visibility of the workpieces, enhancing precision and comfort under any working conditions.

Condition: good (used), functionality: fully functional, Year of construction: 1996, working width: 1,020 mm, sheet thickness steel (max.): 20 mm, overall weight: 11,000 kg, Hydraulic guillotine shear, guillotine for cutting thick steel plates. Manufacturer - COLLY F France; Model - CGH 2010; Year of manufacture - 1996; Blade length - 1020 mm; Cutting thickness - 20 mm; Number of knife cycles per minute - 7; Electric back gauge with Elgo programmer; Photoelectric safety barrier; Motor power - 30 kW; Base dimensions - 156 x 190 cm; Height - 210 cm; Bcedpfxsx Hrrle Aafeu Weight - 11,000 kg; CE - yes. Machine connected, ready for inspection.

Condition: used, LVD Shear Type HST C-10/31 Capacity 3000 x 10 Bjdsx Tqtbepfx Aafscu

Condition: ready for operation (used), sheet thickness steel (max.): 10 mm, back gauge: 1,000 mm, power: 21 kW (28.55 HP), total length: 4,330 mm, total width: 2,200 mm, total height: 2,110 mm, empty load weight: 10,000 kg, workpiece length (max.): 3,100 mm, CNC Siemens achteraanslag en snijhoekverstelling 2 voorste steunpunten van 3 meter Handmatige afstelling van de messpeling Instapbeveiliging aan de achterzijde Strokes/min: 9 > 40 str/min Adjustable cutting device: 0,1 > 1,5 mm Backgauge: 1000 mm Siemens Adjustable cuttingedge: 0,5° > 2,5° Courant needed: 380V Bjdpfxov Taias Aafocu Number of sheet holders: 17x

Condition: used, functionality: fully functional, Year of construction: 1981, machine/vehicle number: 3584, FASTI guillotine shear Type: TCHE 25/6 Sheet width: 2500 mm Sheet thickness: 6 mm Back gauge: 750 mm Hold-downs: 16 units Bcjdpoyarwyofx Aafsu Total required power: 12 kW 3x front support arms Foot pedal Dimensions: approx. 3000 x 1500 x 2000 mm Weight: 5400 kg Serial no: 3584