Used Hydraulic Plate Shear for sale (27,098)

Condition: used, Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° work height max. 900 mm total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop Good/well-maintained condition (!!) Features: - Robust electro-hydraulic guillotine shear “swing cut” - Electric motorized backgauge - Electric cutting length limiter Iedpfx Adoxabvqsnja - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment - from the front - Front support table incl. recessed handles - 1x stable side stop, with scale and tilt cam - 3x stable front support arms - 1x freely movable foot switch - Front finger guard - EMERGENCY STOP button at the front - Operating instructions * Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: good (used), motorized limit stop behind foot switch Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Iodehtq N Njpfx Adnoa Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1994, sheet width 3050 mm plate thickness 16 mm distance between columns 3050 mm 15-1000 mm cutting angle adjustment ja ° cutting gap adjustment ja mm connected load 30 kW weight of the machine ca. 14,.5 t dimensions of the machine ca. 4,0 x 260 x 2,55 m Hydraulic guillotine shear with - ELGO control for backgauge Iodpsxz Hg Dofx Adnja - Cutting angle adjustment - Cutting length adjustment - Cutting length limitation (time dependent) - Sheet thickness adjustment - Back gauge with clearance function - Cutting line lighting - Side stop - 3 pcs. support consoles - good condition

Condition: new, CNC Hydraulic guillotine shear New machine Manufacturer:UMS Type : PRO. 3100 x 13 CNC Technical data: Cutting length 3100 mm sheet thickness (42 kgf/mm) 13 mm sheet thickness (70 kgf/mm) 8 mm cutting angle: 0,5 - 3 mm 15 pcs. blank holder Cybelec Cybtouch 8 monoblock: steel welded construction Automatic cutting gap adjustment Table with ball rollers High quality, hardened and ground upper and lower knives Light sensor for front side (sheet guide) Adjustable cutting stroke 1 m support arm with scale 1 m support arms ( 2 pieces ) Iedpfx Aonl D Tfjdnja Rear light sensor ( 10-16 mm sensor distance) Cutting line illumination Motor 30 kW throat 180 mm Cutting speed 7/13 Original Rexroth valves Rexroth hydraulic system Rexroth pump, original Eckerle Electrical parts from Siemens Operating instructions German Table height 900 mm Overall dimensions 3840x2830x2180 (WxLxH) Total weight 11.000 kg plus commissioning, training and transport Delivery time from order approx. 70 days

Condition: used, Hydraulic guillotine shear STEINER type HTS 30/20 R Machine. No. 315 Year of construction 1982 cutting length 3050 mm cutting thickness 20 mm backgauge 800 mm controlled Isdpfxjd Hxx Ae Adnea motor power approx. 30 kW mains connection 400 Volt, 50 Hz - backgauge with positioning control ELGO - backgauge adjustment via ball screws - Safety light barrier SICK at the front as intervention protection - 3 material support arms with ball rollers - electric foot switch - spare blade Space requirement of the basic machine L x W x H 4650 x 2610 x 3200 mm Weight of the basic machine 27000 kg Space requirement for transport (basic machine) L x W x H 4650 x 2610 x 3200 mm Space requirement for transport (additional) L x W x H 3500 x 2450 x 1400 mm Weight complete 27000 kg Mechanically in very good condition Hydraulic problems, Electrical control in need of overhaul.

Year of construction: 1994, condition: ready for operation (used), A hydraulic plate shear BBM is available. Working width: 4000mm, max. material thickness: 4mm. An on site inspection is possible. Iedpfx Asxxa Tfednoa

Condition: ready for operation (used), Year of construction: 2000, sheet width 1030 mm plate thickness 12.0 mm thickness at "Niro-steel" 8.0 mm blade length 1050 mm cutting angle 3.0 Grad no. of strokes ca. 10 Hub/min back stop - adjustable 500 mm Control konv. table height 900 mm operating pressure max. 280 bar oil volume 150 l engine output 11.0 kW weight 1900 kg range L-W-H 1550 x 1150 x 1600 mm Machine from a maintenance workshop (!) Furnishing: - heavy / robust electro-hydraulic sheet metal plate shears - Machine body in a closed design as an all-steel welded construction - Knife upper cheek slides in a long downward direction over the knife edge . protruding plastic guides - Cutting is done hydraulically via two hydraulic cylinders - The upper beam returns to its starting position in two ways . Spring batteries on the side stands - manual back gauge, adjustable from the rear * Adjustment by handwheel, with mm scale - manual cutting gap adjustment - 1x side stop, with mm scale and T-slot Iedpoxyafdefx Adnea - Foot switch for lifting version - rear sheet metal slide - instruction manual * Machine link: ?machineno=1008-9325319

Condition: good (used), functionality: fully functional, Year of construction: 1993, sheet thickness steel (max.): 13 mm, back gauge: 1,000 mm, cutting length (max.): 3,050 mm, motorized limit stop cutting crack adjustment cutting angle adjustment foot switch Technische Daten / technical details: Schnittlänge / max. cutting length 3050 mm Schnittleistung / cutting capacity 13 mm Iodpfx Asv Tk Efjdnoa Hinteranschlag / limit stop 1000 mm Antriebsleistung Motor/ drive capacity motor 22 kW Gewicht der Maschine ca. / weight 8000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: like new (used), Year of construction: 2013, cutting length 1060 mm cutting angle 2 ° no. of strokes 50 Hub/min engine output 4,0 kW weight of the machine ca. 0,67 t Motorised guillotine shears type 165.03 Technical data: Working width (cutting length): 1060 mm Max. sheet thickness to be cut: 2.5 mm at 400 N/mm² Machine stroke rate approx.: 50/min Cutting angle: 2° Ijdpfx Asua Iulodnja Opening width hold-down device: 5 mm Factory setting cutting gap 0.1 mm - Digital display for backgauge - Front table support - Operating instructions available

Condition: used, Year of construction: 1998, sheet width 3050 mm plate thickness 12 mm distance between columns 3120 mm back stop - adjustable 20 - 750 mm true cutting angle adjustable 0,5 - 3,0 Grad cutting length 300 - 3000 mm connected load 22 kW weight of the machine ca. 10,5 t Isdsxwzc Eopfx Adnsa dimensions 4,1 x 2,3 x 2,1 m Hydraulic guillotine shears with: - Digital display for back gauge - Cutting gap adjustment - Cutting length adjustment - Emergency stop device - Angle stop and front sheet metal supports - 3 sets of spare blades - foot switch - documentation

Year of construction: 1982, condition: used, sheet width mm plate thickness mm distance between columns mm digital Ijdsq Dta Iopfx Adnoa working width 4500 mm 8mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Year of construction: 2003, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm down holder 14 Stück no. of strokes max. 15 Hub/min Ijdpfjxacdiex Adnsa cutting angle 1°15 work height max. 770 mm column arm 350 mm oil volume 170 ltr. control ENC 100 total power requirement 15.0 kW weight 7500 kg range L-W-H 3850 x 2200 x 1950 mm Equipment: - NC electro-hydraulic swing beam shear - DURMA "ENC 100" digital control unit * Operator control, pivoting to the front left - NC electro-motorized backgauge * Travel = 1.000 mm (X axis) * On recirculating ball screws - Manual quick cutting gap adjustment * Via eccentric (right side column) - Machine column with overhang (350 mm) - 1x extra-long side stop, with mm scale - 2x front support arms, with mm scale - Ball transfer units in the front support table - Front hinged finger guard - 1x freely movable foot switch - Rear safety device (protective grid) - 2x emergency stop buttons at the front - Operating instructions (PDF)

Condition: good (used), functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 16 mm, back gauge: 1,000 mm, cutting length (max.): 3,150 mm, foot switch motorized arrester behind cutting angle adjustment Technische Daten / technical details: Schnittleistung / max. cutting capacity 16 mm max. Schnittlänge / max. cutting length 3150 mm Anschlag / limit stop 1000 mm Gewicht der Maschine / weight 16300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Ijdpfxov Syyvs Adnea

Condition: used, Year of construction: 1998, sheet width 3050 mm plate thickness 6 mm rear stop 10 - 750 mm cutting angle 0,5 - 3 ° down holder 18 Stk no. of strokes 9 / 14 Hub/min total power requirement 7,5 kW Ijdpfsw S Nknox Adnja dimensions of the machine ca. 3750 x 1600 x 2450 mm weight 4800 kg Features: - Electro-hydraulic, slide-guided sheet metal guillotine shears - Front control panel, front left - With electro-hydraulic cutting angle adjustment - With manual cutting gap adjustment, from the front (eccentric) - Electric motor rear stop 10-750 mm (ball screws) - With analog position display + hand wheel for fine adjustment - 1x side stop - 3x support arms - 1x freely movable foot switch - Front finger guard - Operating instructions (PDF)

Condition: used, Year of construction: 2012, sheet width 3100 mm plate thickness 16 mm distance between columns 3400 mm cutting angle 2,5 ° work height max. 900 mm rear stop 1000 mm down holder 14 Stück Control CYBELEC CYB TOUCH 6 oil volume 500 l no. of strokes 10 Hub/min total power requirement 30 kW Ijdpfx Adjwli Nfjnja weight of the machine ca. 16400 kg dimensions of the machine ca. 4150 x 2360 x 2450 mm Features: - Electric rear stop 1000 mm - Electric cutting gap adjustment - Electric cutting angle adjustment - Cutting length limitation - CYBELEC CybTouch 6 control - Light barrier behind the machine - Finger protection at the front - Ball rollers in the support table - 1x side stop - 2x front support arms - Foot switch

Condition: used, Year of construction: 1985, sheet width 2550 mm plate thickness 4 mm Iodpfx Asv Uq Snsdnea rear stop 1000 mm cutting angle 1,5 ° down holder 14 Stk total power requirement 6,5 kW weight 3400 kg dimensions of the machine ca. 3000 x 1500 x 2000 mm Features: - Electric rear stop 1000 mm - Electric cutting angle adjustment - 1x side stop 1250 mm - 3x front support arms - Front finger guard - Foot switch

Condition: used, Year of construction: 1983, sheet width 3050 mm plate thickness 6,0 mm Isdevxlpijpfx Adnja distance between columns 3000 mm cutting angle 0,5 - 3 ° no. of strokes 9 / 14 Hub/min down holder 18 total power requirement 10 kW weight of the machine ca. 4800 kg dimensions of the machine ca. 3750 x 1600 x 1650 mm Features: - Hydraulic / slide-guided sheet metal guillotine shears - Electric backgauge 10-750 mm - Electric cutting angle adjustment - Manual cutting gap adjustment - 1x side stop - Front finger guard - Foot switch

Condition: used, Year of construction: 2008, sheet width 3100 mm plate thickness 6 mm rear stop 1000 mm cutting angle 1,2 ° down holder 14 Stk no. of strokes 18 Hub/min oil volume 150 l total power requirement 11 kW dimensions of the machine ca. 3900 x 1900 x 1600 mm weight 5500 kg Equipment: - Hydraulic swing cut shears - ELGO control system - Electric backgauge 1000 mm - Manual cutting gap adjustment - Cutting length limitation Ijdpfx Ajvuz Tpsdnoa - Ball rollers in the table - 2x front support arms - 1x front side stop with scale - Front finger guard, hinged - Rear safety device (protective grille + light barrier) - Foot switch - Operating instructions

Condition: used, Year of construction: 1989, sheet width 2540 mm plate thickness 6 mm rear stop 900 mm down holder 14 Stk no. of strokes 20 Hub/min total power requirement 10 kW dimensions of the machine ca. 3100 x 2200 x 2600 mm Ijdpfx Adjvg R Sfonsa weight 5000 kg Features: - Central lubrication - Electric rear stop - 1x side stop 2350 mm - 2x front support arms with stop 1700 mm - Front finger guard - Spare blade (used) - Foot switch

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° Iodpfxsuagxps Adnja no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: used, Year of construction: 1985, sheet width 2500 mm Isdpjt Sykqsfx Adnoa plate thickness 6 mm rear stop 750 mm down holder 16 Stk total power requirement 12 kW weight 5400 kg dimensions of the machine ca. 3000 x 1500 x 2000 mm Equipment: - Electric backgauge 750 mm - Pneumatic sheet metal holders - 2x side stops - 3x front support arms - Ball rollers in the front support table - Rear sheet metal chute - Foot switch

Condition: used, Year of construction: 1973, sheet width 3100 mm plate thickness 3 mm rear stop 1000 mm down holder 18 Stk cutting angle 0.5 - 1,0° 30° ° oil volume 150 l total power requirement 5,5 kW weight 4300 kg dimensions of the machine ca. 3800 x 1950 x 1600 mm Features: - Manual rear stop (front via handwheel) - Manual cutting angle adjustment - 1x front support arm - 1x side stop Iedpfx Adstzv T Tenea - Front finger guard - Operating instructions (English)

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction Ijdpfxexab Tvs Adnja - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: used, Year of construction: 1994, sheet width 3100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 3.0 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 12 - 50 Hub/min back stop - adjustable 5.0 - 750 mm oil volume 120 ltr. engine output 7.5 kW weight 6400 kg. range L-W-H 4045 x 1783 x 1750 mm Iedpsxaap Nofx Adnsa Good condition (!!) According to the previous seller, with very few operating hours From a maintenance workshop Equipment: - Robust electro-hydraulic sheet metal shear * Design: Guide rail - LVD control panel centrally located on the front of the machine - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment * Adjustment from the front - via handwheel * Including analog value display - Electro-motor-driven backgauge with recirculating ball screws * Continuously variable adjustment range * Analog position display * Rapid traverse possible - Ball transfer units + recessed grips in the support table - Front finger guard - 1x freely movable foot switch - 2x emergency stop buttons at the front - Original operating instructions * Special accessories included: - LVD movable sheet support device for thin sheet metal blanks - 1x LVD extra-long side stop (3.000 mm) with Support leg - 1x LVD used set of replacement blades

Condition: good (used), Year of construction: 1991, sheet width - max. 1010 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded max. 20 Hübe/min cutting angle 1.5 ° work height max. 900 mm Control ELGO total power requirement 5.5 kW weight of the machine ca. 2200 kg. range L-W-H 1500 x 2155 x 1606 mm from a maintenance workshop good condition (!!) - in checked conditions - machinevideo - ?v=w22S17mfU-A Iodpfsxrgv Tsx Adnsa Equipment: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * Includes NC ELGO positioning control "TYP 85" - Electric cutting length limiter - Manual cutting gap adjustment - 1x side stop with scale - 2x support arms - 1x freely movable foot switch - Original operating instructions * Special accessories included: - Pneumatic holding device for thin sheet metal blanks