Used Fss 400 for sale (18,945)

Condition: excellent (used), functionality: fully functional, planing width: 430 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, total length of planing tables: 2,900 mm, total width: 700 mm, total height: 1,000 mm, overall weight: 750 kg, SAC FS 400 Planer | 4-knife surface planer! Excellent condition! SAC FS 400 Planer | 4-knife surface planer! EXCELLENT CONDITION! Machine from an Italian manufacturer. TECHNICAL SPECIFICATIONS: - Table length 2900 mm - Working width 430 mm - 4 traditional knives - 3kW motor - Shaft rpm 5000 - Shaft diameter 120mm - Both tables are adjustable - Stable, solid fence - Shaft damping system Machine dimensions: - Length 290 cm Gkodpfx Akjzqlqmeyoc - Width 70 cm - Height 100 cm - Weight 750 kg WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: like new (used), functionality: fully functional, planing width: 400 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, Griggio PF 400 Planer! Small, 4-knife, stable! SUPER Manufacturer! Italian, in excellent condition! Griggio PF 400 Planer! Small, 4-knife, stable! SUPER Manufacturer! Perfect condition! TECHNICAL SPECIFICATIONS: - Table length 2500 mm Gedszx A Ncopfx Akyokc - Working width 400 mm - 4 traditional knives - 3kW motor - Shaft RPM 5000 - Shaft diameter 120mm - Both tables adjustable - Stable, solid fence - Shaft noise reduction system Machine dimensions: - Length 250 cm - Width 70 cm - Height 100 cm - Weight 550 kg WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl We have the following machines: band saws, circular saws, crosscut and miter saws, thicknessers, planers, sanders, horizontal and vertical drilling machines, feed systems, sharpening machines, four-sided planer, 4-sided, 3-sided, three-sided, two-sided, thicknesser, planer, sander, jointer, planer-jointer, planer-thicknesser, jointer-thicknesser, cleaning machine, mortiser, dowel machine, parquet machine, trimming machine, rounding machine, for log homes, milling machine, milling machines, spindle down, spindle up, top, bottom, sanders, wide belt, narrow belt, throughfeed, cylindrical, disc, angle, planer, drill, drills, horizontal, radial, milling machine, multi-spindle, edge banders, edge banding machine, veneer machine, press, presses, lathes, log splitters, briquetting machines, briquette machine, chippers, chipper, wood chipper, boring machine, boring machines, dust extraction, dust collectors, extractor, extractors, fan, fans, sharpener, sharpeners, compressor, compressors, sharpening machines, multi-functional.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 1,320 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 45 rpm, quill travel distance: 100 mm, overall weight: 4,100 kg, Vertical milling machine FSS 400. Manufacturer: UNITECH - 2002. Readouts on 3 axes. Gedpszcvftjfx Akyjkc Working table dimensions: 1600 x 400 mm Travel in the X axis (longitudinal): 1320 mm Travel in the Y axis (transverse): 400 mm Travel in the Z axis (vertical): 650 mm Maximum table load: up to 1500 kg Spindle taper: ISO 50 Spindle speed range: 45 – 2200 rpm Working feed range: 16 – 800 mm/min Spindle quill travel: 100 mm Vertical head swivel angle: ±45° Tool clamping: automatic / mechanical (electromechanical tool clamp) Main motor power: 11 kW Total connected power: approx. 14.5 kW Total weight: 4100 kg Overall dimensions (Length / Width / Height): approx. 2300 x 2000 x 2700 mm

Condition: good (used), Hello, For sale: Vertical milling machine FSS-400/1600. The machine is operational, in continuous use, and available for inspection. Gsdpfx Ajxyi U Iskyskc The listed price is net; VAT must be added. The machine can be viewed in Starachowice at 13 Kwiatkowskiego Street. Telephone contact available from 7:00 to 16:00.

Year of construction: 1981, condition: ready for operation (used), functionality: fully functional, empty load weight: 8,300 kg, filling opening length: 600 mm, filling opening width: 430 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Filling opening: 600 × 430 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,700 × 1,600 × 2,800 mm Unladen weight: 8,300 kg Gjdsz Ebdcopfx Akyokc Frequency: 50 Hz Voltage: 420 V Motor power: 55 kW Current consumption: 95 A

Condition: used, Year of construction: 1984, Milling Head vertical accessory for a milling machine Fritz Heckert FSS 400 - weight 255 kg Gkedpfx Akju N E Aboyoc - dimensions: LxWxH: 560 x 500 x 400mm - swiveable 90° right / left - clamping area 500 x 400mm *

Condition: like new (used), Year of construction: 2023, Tindo Cooking Kettle 400L Year 2023 Capacity 400 Ltr Fully stainless steel Gkedpfx Akot Tx Dleyjc Tipping facility Terminal fluid jacketed vessel Variable speed mixing control Vertical lift on head As new condition Only used for product testing

Condition: used, VERTICAL MILLING HEAD Accessory for a Fritz Heckert FSS 400 milling machine Weight: 285 kg Dimensions (LxWxH): 550 x 500 x 550 mm Gedpfx Akov U I Sljyskc Swivels 90° to the right / left Clamping surface: 500 x 400 mm Taper: SK 45 Flange diameter: D = 260 mm Mounting: 4 holes, diameter D = 17.5 mm *

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: Godpfx Akjyc H N Njyokc • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: used, functionality: fully functional, mileage: 687,000 km, power: 294.2 kW (400.00 HP), first registration: 08/2007, fuel type: diesel, axle configuration: 8x4, wheelbase: 3,800 mm, fuel: diesel, gearing type: mechanical, emission class: euro5, suspension: steel-air, loading space length: 6,800 mm, Year of construction: 2007, Equipment: ABS, retarder, 8x4 Euro 5 emission standard Manual transmission Tridem axle configuration The 4th axle is a steering and lift axle Wheelbase: 3.80 m Godpfx Asz Nxqpjkyjkc Length of loading platform: 6.80 m In good technical condition and ready for operation.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, operating hours: 3,625 h, cutting width (max.): 4,300 mm, overall weight: 7,200 kg, cutting length (max.): 1,600 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting length: 1,600 mm Max. cutting width: 4,300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 13,600 x 2,450 x 2,450 mm Weight: 7,200 kg Transport packages: 8 pcs. Gkodpfxsz Ni S Do Akyoc Operating hours: 3,625 h

Condition: ready for operation (used), Year of construction: 2015, operating hours: 8,995 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, controller manufacturer: Heidenhain, controller model: iTNC530 (HSCI), workpiece weight (max.): 600 kg, total height: 3,000 mm, total length: 4,500 mm, total width: 4,500 mm, table width: 65 mm, table length: 650 mm, table load: 600 kg, rotary table diameter: 650 mm, overall weight: 10,000 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 8,995 h, coolant supply: 40 bar, spindle motor power: 15,000 W, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 38, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, The HERMLE C 400 U is a high-quality 5-axis CNC machining center, designed for precise and efficient machining. With a working area of 850 × 700 × 500 mm and a Ø650 mm swiveling/rotating table, this machine offers ample space for both complex and larger workpieces. The machine is installed and operational at our facility and can therefore be inspected while running! Additional options & accessories: - Chip conveyor - 40 bar internal cooling (IKZ) - Band filter system incl. 2 new rolls of filter paper. - BLUM LaserControl NT measuring system for tools. - Heidenhain TS 460 3D probe - Electronic handwheel Gksdpfoz Nluusx Akyoc - Tool cabinet incl. approx. 100 pcs. HSK-A63 tool holders, collets and accessories. - 2 pcs. All-Matic machine clamp - Heidenhain reference pin - Manual cabinet roof - Original HERMLE + Heidenhain documentation. Weight & dimensions: approx. 10,000 kg approx. 4.5 x 4.5 x 3 m

Condition: excellent (used), Miyachi Unitek HF25 DC Resistance Welding System controller. The unit is fully functional, starts up correctly, the display works, and all functions respond as expected. The screen displays the message “EMERGENCY STOP – OPERATOR ACTIVATED,” which indicates that the emergency stop circuit has been activated – this is not a malfunction of the device. This model is designed for precise control of the DC resistance welding process. It features a clear display, numeric keypad, the ability to program welding parameters, and RS-232 and RS-485 communication interfaces. Power supply: 380–400 V AC, 50/60 Hz. Technical specifications: Manufacturer: Miyachi Unitek Model: HF25 Type: DC Resistance Welding System Power supply: 380–400 V AC, 50/60 Hz Max. output current: 2400 A RMS Max. open-circuit voltage: 10 V Interfaces: RS-232, RS-485 Inputs include: FOOT SWITCH, AIR VALVE DRIVER, VOLTAGE SENSE, WELD HEAD Gjdpfx Akozma Sdeyjkc Condition: Fully functional. Visual condition matches the photos – normal signs of use. The power cord has been repaired (insulated area visible in the photos). The repair does not affect the operation of the device, but this information has been included for full transparency of the sale.

Year of construction: 2023, condition: used, functionality: fully functional, Palletizing line consisting of: Ausloos pallet feeding and destacking stations 2 bag conveyor belts and roller conveyors, approx. 750 cm in length, leading to the loading robot, approx. 120x130 cm Gksdpfx Aez Ipydekyec Loading robot Winner 400, equipped with a rotating pneumatic bag gripper and powered pallet roller conveyors 2 rotating buffer tables, approx. 192 cm in diameter Transfer station and interleaving sheet station Mesutronic metal detectors, manufactured in 2022 Stimag/ohaus pallet check weigher, type Defender 5000 Xtreme, with a range of 10-1500 kg Evolabel label/labeling machine, type T63 Flexwipe G2, manufactured in 2023 Tosa pallet wrapping station, model 090, manufactured in 2023 Crane arm with Donati hoist Roller conveyors in various lengths, including an output conveyor approx. 8 meters long Safety fence with doors and light barriers Control cabinet Dimensions approx. 17x10 meters Manufactured in 2023 400 Volt Ausloos handling system with two stations, featuring roller conveyors and a gripper unit, installed within a safety enclosure.

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, The machine tool undergone a general overhaul, which included the repair of the mechanical part, the electrical part and the derivation of the geometry in accordance with the Technical Acceptance Conditions (WOT) and EN. The machine is adapted to the minimum requirements for occupational health and safety requirements. Gkedpfx Aourvl Rskysc Basic technical data: table working area: 400x1600 mm spindle taper: ISO 50 longitudinal travel: manual/mechanical 1150/1120 mm cross travel: manual/mechanical 370/345 mm vertical travel: manual/mechanical 430/400 mm maximum angle of rotation of the vertical head: +/- 45 stopni spindle speed range: the smallest 28 rpm, the largest 1400 rpm main motor: 11 kW The milling machine has a mechanical tool clamp that allows the operator to automatically clamp the tools in the machine. The machine has been equipped with a central lubrication system and optical rulers (optical scales) for digital reading of the position in 3 axes. Machine is ready for inspection in central Poland.

Condition: excellent (used), Catalog number 7259 TECHNICAL DATA - Inlet width 400mm - Inlet height 200mm - Shaft width 530mm - Shaft diameter 550mm - Blade length 530mm - Number of blades 2 - Screen dimensions 50x50mm - 2 toothed pull shafts from below - Lower shaft motor 2.2kW - Toothed pull shaft from above - Upper shaft motor 2.2kW - Belt conveyor 0.55kW - Belt conveyor length 3000mm - Belt conveyor width 410mm - Main motor 45kW - Automatic reversing - Reverse gear - Machine dimensions (L/W/H) 2900x1600x1600mm - Feeder dimensions (L/W/H) 3070x720x670mm Gsdszrug Tjpfx Akyjkc - Weight approximately 3500kg ADVANTAGES - German-made - Automatic reversing (with adjustable settings) - Reverse gear - Used shredder, very good condition Net price: 85900 PLN Net price: 19977 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, functionality: fully functional, mileage: 687,000 km, power: 294.2 kW (400.00 HP), first registration: 08/2007, fuel type: diesel, axle configuration: 8x4, wheelbase: 3,800 mm, fuel: diesel, gearing type: mechanical, emission class: euro5, suspension: steel-air, loading space length: 6,800 mm, Year of construction: 2007, Equipment: ABS, retarder, 8x4 Euro 5 Manual transmission Tridem 4th axle is steering axle and lift axle Gkedpfsrdd Alsx Akyoc Wheelbase 3.80m Length of loading area: 6.80m Technically in good working order and ready to drive

Condition: used, Year of construction: 1992, operating hours: 27,221 h, functionality: fully functional, machine/vehicle number: 474, turning diameter over cross slide: 240 mm, turning length: 800 mm, rotational speed (min.): 40 rpm, rotational speed (max.): 4,000 rpm, total height: 2,005 mm, total length: 2,953 mm, total width: 1,990 mm, type of input current: three-phase, overall weight: 4,300 kg, Last maintenance performed by INDEX-Werke GmbH & Co.KG on September 29, 2025. Chuck diameter: 200 mm Main drive: 30 kW Speed range: 40-4000 rpm Spindle bore: 65 mm Turning diameter over cross slide: 240 mm Turning length: 800 mm Cross slide with turret Tool positions: 12 Slide travel, cross/longitudinal: 220/850 Powered tools: 6 Speed at the drive wheel: 4000 rpm Tailstock Arbor diameter / Arbor travel: 85 / 140 Mount according to DIN 228: MK5 Total power: 52 kW Machine weight: 4300 kg Dimensions (L/W/H): 2953/1990/2005 Technical data subject to change without notice. Errors and prior sale excepted. Gkjdez Ng I Aspfx Akysc

Condition: used, Year of construction: 1989, operating hours: 4,825 h, load capacity: 1,500 kg, lifting height: 4,000 mm, fuel type: electric, mast type: triplex, construction height: 1,900 mm, Year of construction: 1989 Field of application: Internal logistics Gkjdpfx Ajz R Imiekyec Damages: none

Condition: excellent (used), CATALOGUE NUMBER 72133 TECHNICAL DATA - max cutting height 180mm - track width 400mm - roller width 370mm - roller diameter 60mm - max blade diameter 300mm - blade bore diameter 80mm - min workpiece length 630mm - max workpiece width 600mm from above: - pneumatic pressure roller - pawls Gksdpfx Aszrmn Aokyec - metal pressure roller, 2 pcs - pawls - blade roller - smooth pressure roller - pawls - smooth pressure roller from below: - metal toothed pull roller, 2 pcs - pawls - track - blade roller - track - stepless feed rate adjustment via frequency inverter - main motors 2x55kW - feed motor 4kW - hydraulic body lifting up/down - hydraulic blade roller adjustment - pump motor 0.37kW - central lubrication - dust extraction port diameter 1x300mm, 1x380mm - dimensions L/W/H 3200x2350x2000mm - weight approximately 5500kg ADVANTAGES - Made in Italy - Two-roller - Multi-blade saw, used, very good condition Net price: 238900 PLN Net price: 55560 EUR Net price calculated at an exchange rate of 4.3 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), For sale: Bernardo KFM 500 M edge chamfering machine, designed for precise chamfering and deburring of parts made of steel, stainless steel, aluminum, and other metals. This machine is ideal for preparing parts for welding, removing sharp edges, and creating even chamfers. Its robust construction and adjustable chamfering angle ensure accurate and repeatable machining. The machine is sold with the operating manual and a set of cutting blades, as shown in the pictures. Technical data: Manufacturer: Bernardo Country of manufacture: Austria Model: KFM 500 M Year of manufacture: 07/2019 Machine number: PWA-190707 Type: edge chamfering machine Motor power: 0.55 kW Power supply: 400 V Frequency: 50 Hz Rated current: 1.48 A Recommended protection: C16 Weight: 33 kg Application: The device is designed for: chamfering edges, deburring parts, preparing material for welding, machining steel, stainless steel, and aluminum, creating precise chamfers for welds. Included: Bernardo KFM 500 M chamfering machine, operating manual, set of cutting blades (shown in the pictures), other items shown in the pictures. Condition: Gkedpfx Akeziww Noysc The device is used and in good visual condition. Normal signs of wear and tear are visible, consistent with its use. The machine is sold exactly as it is and with all the components shown in the pictures.

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 18 h, actuation type: electric, controller manufacturer: Trotec, laser type: CO₂ laser, laser source manufacturer: Trotec, laser hours: 10 h, laser power: 120 W, laser wavelength: 10,600 nm, working length: 1,016 mm, working width: 610 mm, working height: 305 mm, feed rate X-axis: 259 m/min, feed rate Y-axis: 259 m/min, input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, type of cooling: air, warranty duration: 24 months, Equipment: CE marking, emergency stop, We are offering this virtually new Trotec Speedy 400 engraving and cutting machine with a factory warranty. It is located in a sufficiently dust-free environment with the correct temperature and humidity. Machine data as of October 1, 2026: Gsdpfx Ajz Il Auokyekc - Total machine operating time: 18 hours and 8 minutes - Total laser source operating time: 9 hours and 21 minutes - Total registered travel distance: 241,066 meters Model: Speedy 400 Manufactured: March 2026 Country of origin: Austria Mains voltage: 230 V AC Frequency: 50/60 Hz Rated power: 2100 W Wiring diagram: 8086_Speedy400_wiring Laser type: CO₂ Laser power: 120 W Wavelength: 10.6 µm Pilot laser power: ≤0.99 mW Pilot laser wavelength: 655 nm New price: €76,040 If you have any questions or would like more information, please send a message or call. The pick-up date will be arranged in consultation. Two industrial fans for air extraction can also be included.

Condition: ready for operation (used), functionality: fully functional, DELTA LC 400 / Rotary table grinding machine -Max. grinding diameter 400mm -Magnetic chuck -Grinding height / distance between table and grinding wheel approx. 230mm -Spindle speed 2850 rpm Gksdoz Nkf Eepfx Akyoc -Fine feed 0.01mm -Distance between column and grinding wheel axis approx. 320mm -Spindle motor 3 KW -Grinding wheel dimensions 200x80x78mm -Machine enclosure -Coolant system -Documentation Dimensions: L x W x H 1.2 x 0.8 x 1.8 meters / Weight 700 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2017, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 25787, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 6,900 h, Equipment: chip conveyor, documentation/manual, Hermle C 400 U – 5-Axis Machining Center Year: 2017 Control: Heidenhain TNC 640 Condition: Very good Machine ON: 18,512 h Program: 9,268 h Gjdpfx Akjz H Agbjyjkc Spindle ON: 6,900 h Drive ON: 18,514 h Axes in motion: 7,147 h Technical specifications: X/Y/Z travel: 850 / 700 / 500 mm A-axis: 25 rpm C-axis: 30 rpm Spindle speed: up to 18,000 rpm Power: 20 kW Torque: 173 Nm Tool holder: HSK 63 Tool magazine: 38 + 50 positions NC swivel rotary table: Ø 650 mm Swivel range: +91° to −139° Equipment: Heidenhain touch probe BLUM tool measurement Electronic handwheel Chip conveyor Oil mist extraction Inspection possible by appointment.

Condition: excellent (used), For sale: Professional tool grinder by HASBERG, model FSS. German-made, solid and precise construction. 📊 Technical data: Manufacturer: HASBERG Model: FSS Year of manufacture: approx. 1976 Power supply: 3-phase 220/380 V Motor power: 250 W Speed: 2750 rpm 🛠 Condition: The item is used, shows normal signs of wear, and is in good technical condition. The machine is fully functional and ready for operation. 📦 Included: Godpfx Asy A Tqzskyekc Set of collets (various diameters – as shown in the photos) Additional grinding wheels Accessories as visible in the photos ✅ Advantages: Very robust construction (German quality) Large set of collets (high value) Precise machining and tool sharpening Ideal for workshops, tool rooms, or production ℹ️ Additional information: The set for sale is exactly as shown in the pictures. Inspection on site possible. Shipment on a pallet or personal collection possible.