Used Hydraulic Veneer Press for sale (37,963)

Condition: excellent (used), Catalogue number 7830 TECHNICAL DATA - size of heating plate: 2200x1100 mm - number of batches: 1 - electrically heated shelf - total clearance: 280 mm - number of cylinders: 4 Pjdpfxsxz Ebge Adnerd - cylinder diameter: 80 mm - total power: 10 kW - dimensions (L/W/H): 2540x1260x1860 mm - weight: approx. 2000 kg ADVANTAGES – German-made – electrically heated shelf – unpainted – very good condition – used press Net price: PLN 15,900 Net price: EUR 3,790 Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, price may change)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Shelf length: 3000 mm Shelf width: 1300 mm 6 hydraulic pistons Piston diameter: 70 mm Safety switch – emergency pull cord Electric oil heater Weight: 3300 kg Prsdpfx Ajw Nqnvjdnod New aluminium shelf coverings Year of manufacture: 2013

Condition: like new (used), Year of construction: 2004, working width 2700 mm working height 100 mm hydraulic cutting gauge adjustment to size Predpfsxcn Dtex Adned cast body power supply 400V 3000 kg Year of manufacture 2004

Condition: good (used), Year of construction: 1978, functionality: fully functional, total height: 7,900 mm, total width: 5,750 mm, total length: 7,000 mm, pressing force: 2,000 t, table width: 1,650 mm, table length: 2,000 mm, overall weight: 144,500 kg, distance table to ram: 2,400 mm, Equipment: documentation/manual, 25/11/2025 2000 tons press hydraulic Located: Balti city (postal code: MD-3100), Republic of Moldova (European region) ----- Manufacturer: Dnepropress (Ukraine) Nominal force: 2000 tons Slide stroke: 1400 mm Shut height (distance between plates): 2400 mm Table size(width/length): 1650×2000 mm Overall machine dimensions: 7000×5750×7900 mm Predpfx Aow Hridjdnsd Main motor power: 62 kW Press weight: 144.5 tons YOM: 1986

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting Prjdpfxecmat Uo Adnod more photos an questions

Condition: used, HYDRAULIC PRESS SMG Psdpotndu Uefx Adnord PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Condition: good (used), Press machine, hydraulic press, used machine Manufacturer: SEJFO Model: 7051-3 Overall dimensions: 800 x 1400 x 2480 mm Podpet A U Irsfx Adnord Weight: 996 kg Stroke length: 300 mm Maximum hydraulic pressure: 140 Bar Year of manufacture: 1997 Hydraulic power supply: 380 V; 50 Hz

Condition: good (used), Year of construction: 1990, Pressure: 1200 t Stroke height: 800 mm Table size: 1600 x 4000 mm Pedpfxoxzd Ewo Adnord

Condition: used, Year of construction: 2025, total height: 2,100 mm, total width: 800 mm, total length: 2,200 mm, Empty weight: 1.145 kg Price: On request - Year: 2025 - Documentation available: No - CE marking present: Yes - CE certificate present: Yes - Serial number: PPW10061N2025009 - Control: Conventional - Motor power: 3.0kW - Table width: 300mm - Throat depth: 1500mm - Table length: 1500mm - Ram width: 120mm - Ram length: 120mm - Model: Hydraulic Psdpfx Asxb Scwsdnord - Max. stroke: 380mm - Number of columns: 2 - Height adjustment: 750mm - Power: 100.0ton - Transport dimensions: 2200mm x 800mm x 2100mm (l x w x h) - Transport weight [kg]: 1145kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2001, condition: used, Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014. Prodpfx Aodwf Dbsdned

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, total width: 3,090 mm, total length: 2,000 mm, total height: 3,600 mm, overall weight: 3,800 kg, type of input current: three-phase, workpiece height (max.): 60 mm, table width: 1,000 mm, table length: 2,600 mm, Wood gluing press 12 working fields main cylinders 12 x 3 =36 pieces ,cylinders 63 x 60 and 4 pressure side levelling 50 x 50 pieces 12 x 4 =48 pieces .Machine new invoice .Warranty one year .Press rotates with inverter controlled transmission .Press stop is on induction sensor .Or rotates smoothly .Actuation of cylinders with lever switches press field is one meter width 2,6 length 60 mm thickness . Pedpfxetx T Tyo Adnjrd

Condition: used, Year of construction: 2025, total height: 2,200 mm, total width: 800 mm, total length: 1,100 mm, Empty weight: 540 kg Price: On request Movable pressing-cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 - Motor power: 2.2kW - Table width: 260mm - Throat depth: 750mm - Table length: 1000mm - Ram length: 100mm Psdpfx Aow N St Hednord - Model: Hydraulic - Max. stroke: 380mm - Number of columns: 2 - Height adjustment: 750mm - Power: 60.0ton - Transport dimensions: 1100mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 540kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2025, total height: 2,200 mm, total width: 800 mm, total length: 1,450 mm, Empty weight: 970 kg Price: On request Movable Press-Cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 - Motor power: 3.0kW - Table width: 300mm - Throat depth: 1100mm - Table length: 1500mm - Ram length: 100mm - Model: Hydraulic - Max. stroke: 380mm - Number of columns: 2 - Height adjustment: 750mm Prodpfx Adow N Su Djnsd - Power: 100.0ton - Transport dimensions: 1450mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Double-column hydraulic press RASTER ZEULENRODA (WALTER) Type WUP-S 60 Mach. No. 707, built in 1994 Pressure capacity 60 tons Column width 1090 mm Side clearance 275 mm Ram surface 890 x 540 mm Table surface 990 x 540 mm Max. ram stroke 300 mm Installation height 390 mm Table height above floor 900 mm Hydraulic operating pressure 250 bar Rapid downward speed 47 mm/s Rapid upward speed 75 mm/s Working speed 15 mm/s Return speed 37 mm/s Motor power 15 kW (2 x 7.5 kW) Power supply 400 volts, 50 Hz, 15.85 kW - SICK light barrier, type LVS 600 - Manually adjustable limit switch cams for stroke limitation - Press force adjustment via handwheel - Continuous press force holding time adjustment - Two-hand operation on the machine - Additional ram plate Guided by two lateral guide rods, Ø 50 mm - Table top with 18 mm T-slots, slot spacing 185 mm - Table top through hole Ø 100 with insert reduction to Ø 30 mm - Ram plate with 40 mm bore and clamping screw Prsdev Srfdopfx Adned - Electrical cabinet on the side of the machine stand - 3 monitored safety valves for the hydraulic system - Accident prevention regulations for manual insertion work - Electrical circuit diagram Space requirement L x W x H 1900 x 1350 x 2570 mm Weight 3.1 tons Good condition

Condition: used, Year of construction: 2015, pressure 30 t throat 250 mm table-size 650 x 500 mm stroke 400 mm dayligth min. 120 / max. 500 mm Control Simatic HMI Touch Siemens Pedpoxz Hfmefx Adnerd total power requirement 13 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,5 x 1,70 x 2,85 m Setup mode and single stroke operating mode Machine light Two side tables with a support surface of 850x500mm with hydraulic ball bars for heavy workpieces

Condition: used, Year of construction: 1982, functionality: fully functional, Overtravel distance 9 mm; overtravel time 85 ms Prodpfx Adsxz Dbfoned

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Prodsxgpaqjpfx Adnjd Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg

Condition: ready for operation (used), Year of construction: 1996, Main Drive Pressing force 135 Kn Prodjxzvqrjpfx Adnsd This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine. Application Types Pressing / Laminating

Condition: used, Year of construction: 1990, pressure 25 t total power requirement 4 kW 200 mm inward space Pjdpoxzk S Dofx Adnjrd

Condition: used, Year of construction: 1996, Press size: 2550 x 1350 mm, Total pressing force: 90 t, Specific pressing force: 2.8 - 4.0 kg/cm², Hydraulic cylinders: 4x 90 mm, Opening width and press stroke: 400 mm. Storage location: Supplier. Predpjxy Tl Rsfx Adnod

Condition: used, Year of construction: 2015, pressure 30 t Prsdpfx Aow D Hiaodnjd throat 250 mm table-size 650 x 500 mm stroke 400 mm dayligth min. 120 / max. 500 mm Control Simatic HMI Touch Siemens total power requirement 13 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,5 x 1,70 x 2,85 m Setup mode and single stroke operating mode Two side tables with a support surface of 850x500mm with hydraulic ball bars for heavy workpieces

Condition: good (used), functionality: fully functional, Hydraulische Pressen und Maschinenbau GmbH Hydraulic press, 70 9251 3, HES 16MP Model: 7092513 Type: HES16MP Pjdpfx Adsumk Nasnjrd General: Display: 0-400kp/cm2 / 0-25Mp

Condition: new, The KNUTH KP 100 A is a robust Hydraulic Press from the H-Frame Hydraulic Presses category, crafted in Europe with high-quality components for superior performance in deep drawing, forming, and notching processes. This powerful machine offers force capabilities ranging from 40 to 400 tons, making it suitable for both test and series production. Designed with a perfectly welded frame for high rigidity, it features a large hydraulic cylinder that moves the solid ram plate with excellent stability, supported by heavy-duty self-lubricating circular guides. The KP 100 A includes user-friendly amenities such as a mobile two-hand control panel, adjustable limit switches, and T-slots on the work table for easy tool clamping. Additionally, it is equipped with a low-maintenance hydraulic system and precision-machined components that ensure minimal wear and long-lasting reliability. You can benefit from custom solutions tailored to your needs while enjoying the flexibility of multi-shift operation and the potential for Industry 4.0 integration. To explore the possibilities of this H-Frame Hydraulic Press or to request a quote, contact us today. Predpfoxhdzfex Adnod

Year of construction: 2013, operating hours: 14,572 h, condition: ready for operation (used), General Data Machine weight 13200 kg Measurements height 2330 mm Control Unit Brand DELEM Model T3000 Main Drive Number of axis 6 Pedpfx Ajxzlqhjdnerd Bending length 4140 mm Pressing force 1800 Kn Dimensions Machine Length 4610 mm Movement X-Axis Movement 600 mm Y-Axis Movement 20 mm This 6-axis TRUMPF TRUBEND 3180 hydraulic press was manufactured in 2013. It features a bending capacity of 1800 kN and a bending length of 4140 mm. The machine includes a CNC control Delem T3000, a quick clamp system, and a 4-axis CNC backgauge with X, R, Z1, Z2. It operates on 400 V with a power consumption of 18.5 kW. Consider the opportunity to buy this TRUMPF TRUBEND 3180 hydraulic press. Contact us for more information about this machine. Application Types Bending

Condition: excellent (used), Shelf press Manni 2500×1300 Shelf length: 2500 mm Shelf width: 1300 mm Press with 4 hydraulic cylinders Predpfjxyvykex Adnod Shelves heated by water from central heating