Used Mechanical Shear for sale (7,780)

Condition: ready for operation (used), sheet width 2025 mm plate thickness 3.0 mm distance between columns 2050 mm no. of strokes 38 Hub/min cutting angle 1.38 ° Control konv. total power requirement 4.0 kW weight of the machine ca. 1100 kg dimensions of the machine ca. 2299 x 2000 x 1130 mm Current new price: approx. 20.000 euros From a maintenance workshop Special price available upon request Features: - Robust / high-performance electromechanical sheet metal shear - Manual material backgauge * Infinitely variable adjustment range * Adjustment from the rear - via handwheel * Includes mm scale - 1x side stop Dwobwxtbszzrfleaob - 3x front support arms - 1x freely movable foot switch - rear sheet metal chute - front sheet metal removal for smaller workpieces - digital piece counter - control cabinet - mounted on the front left

Condition: used, sheet width 4080 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 0.8 mm Sheet thickness for ALU 2.5 mm cutting angle 1.3 Grad no. of strokes 34 Hub/min distance between columns 4310 mm back stop - adjustable 15.0 - 750 mm table height 820 mm Control ELGO engine output 9.0 kW weight of the machine ca. 3600 kg. range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Features: - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range Dsbwxoxabc Retbaowb * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating instructions Optional accessories included: - Pneumatic sheet metal holding device for thin sheet metal blanks

Condition: used, sheet width 1050 mm plate thickness 3.0 mm thickness at "Niro-steel" 1.5 mm no. of strokes 35 Hub/min cutting angle 2°30 ° engine output 3.0 kW table height 810 mm weight of the machine ca. 1150 kg. range L-W-H 1300 x 1520 x 1170 mm from a maintenance workshop (!!) Furnishing: - robust electro-motorized metal sheet shears - manual backgauge - adjustable up to 610 mm, using the handwheel from the back - 1x side stop including mm scale - 2x table sheet metal support arms Dsbwexabllextbaowb - Piece counter - freely movable foot switch - rear sheet metal slide - EMERGENCY stop button at the front * Machine link: ?machineno=1008-9325126

Condition: used, Year of construction: 2008, sheet width 1530 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 34 Hub/min cutting angle 2.70 Grad distance between columns 1540 mm Dwjbwxtoxyln Rjbaob work height max. 920 mm Control konv. voltage 400 V engine output 3.2 kW weight of the machine ca. 1115 kg. range L-W-H 2275 x 2220 x 1400 mm Features: - Robust motorized swing-arm guillotine shear - Break-resistant, torsion-resistant welded steel construction - Compact and easy-to-use machine design - Manual backgauge, adjustable from the rear * Stepless adjustment across the entire travel range - 1x hold-down bar - 1x freely movable foot switch - Front, extendable table extension - Rear safety device - Original operating instructions * Optional accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: good (used), Year of construction: 2007, sheet width 1350 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 35 Hub/min cutting angle 2.0 Grad table height 945 mm distance between columns 1361 mm Control CIDAN / SIEMENS engine output 5.5 kW weight of the machine ca. 1400 kg range L-W-H 2200 x 2000 x 1550 mm Dwsbwxeyuzcustbaob Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - NC electro-motorized backgauge, with digital display * Target / actual value stop value input * stepless adjustment over the entire travel range - 1x hold-down bar - 1x material side stop - recessed grips in the front support table - Manual cutting gap adjustment from the front - Rear sheet holding device for thin sheets - 1x freely movable foot switch - Operating instructions (PDF)

Condition: used, sheet width 2540 mm plate thickness 2.00 mm thickness at "Niro-steel" 1.25 mm no. of strokes max. 63 Hub/min cutting angle 1.13 Grad Dobsxacftswxtbaswb table height 750 mm table width 320 mm distance between columns 2620 mm back stop - adjustable 5.0 - 550 mm Control konv. engine output 3.0 kW weight of the machine ca. 1600 kg range L-W-H 3100 x 1980 x 1400 mm Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - manual back stop, with analogue display * adjustable from the front * stepless adjustment over the entire travel range - recessed grips in the support table - 1x hold-down bar - 1x side stop - 3x support arms - 1x freely movable foot switch - operating instructions (PDF) Special accessories included: - sheet metal holding device for thin sheet metal cuts

Condition: ready for operation (used), Year of construction: 2006, sheet width 3030 mm plate thickness 3.00 mm thickness at "Niro-steel" 1.50 mm no. of strokes 34 Hub/min cutting angle 1.6 Grad table height 820 mm distance between columns 3120 mm Control POS 100 engine output 2x 4.0 kW weight of the machine ca. 3600 kg range L-W-H 4329 x 2350 x 1600 mm Current list price, including accessories: approx. 65,000 euros (!!) Special price available upon request The PDC motorized guillotine shear is the reinforced version of the MHSU. It offers greater performance thanks to a more robust design and a "DUO-CUT drive" on both sides. - in checked conditions - machinevideo - ?v=XdcxLlr_nWc Features: Dwsbjzn Ahdjwxtbasb - Robust, motorized oscillating-cut guillotine shear - NC-controlled electric motor-driven backgauge * with SCHRÃ?DER POS 100 NC control system * digital position display for the backgauge * adjustable from the front right * with setpoint/actual value input * stepless adjustment over the entire travel range * Limit values secured with limit switches * 9-program programming possible - Break-resistant, torsion-free welded steel construction - Compact and well-organized machine design - All-steel blades - 1x hold-down bar - 1x long side stop with â??ELGOâ? digital display - 2x front support arms, adjustable â??Sliding Systemâ? - Work table with recessed handles - Rear safety guard - 2x emergency stop buttons at the front - 1x freely movable foot switch - Operating instructions (PDF) Special accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: good (used), Year of construction: 2015, sheet width 2050 mm plate thickness 3.0 mm distance between columns 2100 mm back stop - adjustable 550 mm no. of strokes 35 Hub/min cutting angle 2°12 table width 400 mm table height 850 mm Control konv. total power requirement 3.0 kW weight of the machine ca. 1280 kg dimensions of the machine ca. 2400 x 1500 x 1300 mm Current list price: approx. 20.000 euros From a maintenance workshop Features: - Robust / high-performance electromechanical guillotine shear - Manual material backgauge * Continuously adjustable range * Adjustment from the back via handwheel * Includes mm scale * Max. adjustment range: 550 mm - Manual cutting gap adjustment, from the front - 1x side stop with mm scale Dwebwxszd Hb Hstbajb - 2x support arms - 1x freely movable foot switch - rear sheet metal chute - rear safety device (light barrier) - operating instructions (machine control system) - Transport stand (homemade)

Condition: good (used), Year of construction: 2013, sheet width 2520 mm plate thickness 3.2 mm ST cutting thickness max. 5.0 mm AL cutting thickness max. 1.5 mm VA no. of strokes 34 Hub/min cutting angle 1° 20 Grad back stop - adjustable max. 1.000 mm work height max. 800 mm total power requirement 7.5 kW weight of the machine ca. 2100 kg New price approx. 21,000 euros Special price on request Machine was rarely used - good condition (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design Dwobwxtbsy Raitoaeb - ESTUN NC digital display - type "E10-S" - electro-motorized back gauge, adjustment via electric. Button - 1x hold-down bar - manual cutting gap adjustment - rear protective device (side protective grilles) - Selector switch for single and continuous stroke - 1x front side stop - 2x front support arms - 1x freely movable foot switch - original instruction manual

Condition: used, Mechanical Shear BOMBLED type 9G Capacity: 2500 mm x 4 mm Dwebwxtszwcnijbaeb Manual Back gear gauge travel: 500 mm Supplied with 2 front length stops Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: approx 4,5 T

Condition: new, sheet width 1050 mm plate thickness 2,0 mm distance between columns 1050 mm down holder 1 Stück fence Tisch 80 - 480 mm fence Breiten 0 - 600 mm table-size 1300 x 600 mm work height max. 760 mm total power requirement manuell kW weight of the machine ca. 413 kg. range L-W-H 2,0 x 1,04 x 1,6 m Dwjbwoxabdhjxtbaeb - Including adjustable stop on the work table for miter cuts - The knife can be lifted easily thanks to the counterweight on the back - Large work table for safe placement of the sheet metal plates - Sheets can be pushed through, i.e. longer sheets can be cut - Handwheel on the front to adjust the back gauge - Comes with a robust cast iron base as standard - Long service life thanks to knives made of quality steel - Standard with hold-down device including quick-release clamp - Robust machine construction for high stability Furnishing: - manual lever shears - stable execution - hold-down bars - Side scale with unit of measurement - Table stop / width stop

Condition: used, functionality: fully functional, Sacma 3000x6 mechanical guillotine shear, motorized back gauge, throat depth 500 mm, dimensions: 390x195x200 (h) cm, weight: 9900 kg Debwxtbown Hfcjaswb

Condition: used, Year of construction: 1973, sheet width 1500 mm plate thickness 5 mm weight 3,8 t Dwsbwszxt Trextbaeb

Condition: new, Year of construction: 2025, sheet width 1320 mm plate thickness 2.5 mm ST thickness at "Niro-steel" 1.2 mm blade length 1350 mm no. of strokes 34 Hub/min back stop - adjustable max. 825 mm cutting angle 1.5 ° work height max. 810 mm Control konv. engine output 3.0 kW weight 1100 kg range L-W-H 1950 x 1450 (2000) x 1200 mm Exhibition machine - like new Never been used (!!) Special price upon request Features: - Robust electro-mechanical sheet metal shear - Heavy-duty / robust drive motor - Manual backgauge, including analog position indicator Dwobwjxabz Hsxtbajb * Adjustment range max. 825 mm - Manual cutting gap adjustment - 2x table side stops including mm scale - 1x front stop bar - manually adjustable - 2x front support arms - Grip recess in the front work table - 1x freely movable foot switch, including emergency stop button - Control cabinet/operating panel - front right - Rear safety device - Rear sheet chute - Connection cable + plug

Condition: good (used), Year of construction: 1963, cutting length 2500 mm plate thickness 3 mm Dwebwxtoul Eixsbaeb distance between columns 2050 mm blade length 2650 mm total power requirement 3 kW weight of the machine ca. 2,5 t - The scissors are equipped with an adjustable stop on the back. stop. Each side is equipped with a millimetre counter, so that the guarantee that the cuts are true to size. - Spring-loaded automatic hold-downs prevent the material from shifting during the cutting process. material during the cutting process.

Condition: used, sheet width 2500 mm plate thickness 3,0 mm Dsbwxtbetn Em Roajwb distance between columns 2620 mm back stop - adjustable 850 mm weight of the machine ca. 2,8 t dimensions 3,2 x 1,8 x 1,7 m

Condition: used, Year of construction: 1992, Technical details: sheet width: 3000 mm plate thickness: 2,0 mm distance between columns: 3300 mm Dsbeu Icnrowxtbaowb back gauge: 580 manuell mm cutting angle: Nein ° cutting gap adjustment: Nein mm down holder: 13 Stück Table dimensions: 3300 x 300 mm weight of the machine ca.: 3,0 t dimensions of machine: 3,7 x 1,5 x 1,8 m incl. 2x upper knife and 2x lower knife each 1500mm incl. table supports 1500 x 1500mm with roller elements 2x profile strips L: 1400mm 1x side stop bar 1600mm operation via control panel and/or foot pedal *

Condition: used, sheet width 2000 mm Dwsbwxtbsxfwdzoasb plate thickness 3 mm rear stop von Hand, 750 mm dimensions ca. 2800 x 1120 x 1510 mm weight ca. 1800 kg

Condition: used, Technical details: sheet width: 1500 mm plate thickness: 2,25 mm distance between columns: 1600 mm back gauge: nein cutting angle: nicht bekannt ° cutting gap adjustment: nein mm Dobwju Icn Eoxtbaowb down holder: über Druckleiste Stück height over floor: 850 mm Table dimensions: LXB 1800 x 350 mm weight of the machine ca.: 0,85 t dimensions of machine: 2,0 x 0,8 x 1,3 m simple mechanical guillotine shear with shelf right/left 305 x 100mm operation via ON/OFF *

Condition: used, Year of construction: 2004, gebraucht 2004 9726 prompt, Zwischenverkauf v Türkei 6750 € 1 1350 mm 3 mm 35 1/min 1.5 ° 550 mm 3 kW 2 Stk. 850 mm 400 mm 1700 mm 1350 mm 1200 mm 950 kg manualback gauge automatic sheet hold down hold down with rubber pads moveable foot switch side support arm 2 supporting arms user manual in GERMAN does not complie with the German UVV and Austrian AMVO BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details: Dsbwxtbsynmyrsaewb

Condition: ready for operation (used), Mechanical shear FE.MAR Cutting length: 2000 mm Dsbjwm Er Eowxtbajwb Cutting thickness: 3 mm Motorized rear register. Steel base. Front sheet metal supports.

Condition: used, sheet width 2500 mm plate thickness 3,0 mm Dwebeyv I H Djwxtbasb distance between columns 2550 mm back stop - adjustable max. 510 mm weight of the machine ca. 1,8 t dimensions 3,3 x 1,4 x 1,8 m

Condition: new, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: mechanical, working width: 2,060 mm, cutting angle (min.): 1.3 °, stroke rate (min.): 41 1/min, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 750 mm, power: 7.5 kW (10.20 HP), warranty duration: 12 months, Equipment: CE marking, emergency stop, finger protection, foot remote control, Standard Features - ELGO P40T CNC control unit - Robust, welded, monolithic frame construction providing maximum cutting precision - NC-controlled, motorized 750 mm backgauge system - Upper blade with 2 cutting edges, lower blade with 4 cutting edges, made of high-alloy steel - Mechanical hold-down system preventing sheet slippage during cutting Dwebwxtbjyg Id Asaeb - Easily adjustable blade clearance adjustment mechanism - Ball transfer front support table - Front support arms with rule - Cutting line illumination system - Finger guard system - Foot pedal - Rear safety guards - Emergency stop button Optional Features - 1,000 mm backgauge system - Rear sheet support and sliding system enabling sheets to be moved and fed to the rear with ease - Drop-down system for cut pieces to fall to the front - Front adjustable angle square, 0–180° - Front support arms in custom lengths - Manual 750 mm backgauge with front adjustable handwheel - Rear safety light barrier Technical Specifications Machine Type: A04/2060 Cutting Capacity (450 N/mm²): 4 mm Cutting Length (A): 2,060 mm Cutting Angle: 1.3° Cutting Speed: 41 cuts/min Table Depth (C): 800 mm Machine Dimensions (L × W × H): 2,600 × 2,250 × 1,400 mm Motor Power: 7.5 kW Weight: 3,000 kg

Condition: good (used), sheet width 2000 mm plate thickness 2,25 mm Dwebsul Ei Eowxtbaeb distance between columns 2040 mm total power requirement 7,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,2x1,7x1,1 m SN-No. 380/6

Condition: new, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: mechanical, working width: 3,060 mm, cutting angle (min.): 1.3 °, stroke rate (min.): 41 1/min, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 750 mm, power: 7.5 kW (10.20 HP), warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, Standard Features ELGO P40T CNC control unit Robust, welded and monolithic frame structure providing maximum cutting precision NC-controlled, motorized 750 mm backgauge system Upper blade: double-edged; lower blade: four-edged, manufactured from high-alloy steel Mechanical hold-down system to prevent sheet slippage during cutting Easily adjustable blade clearance system Ball transfer front support table Front support arms with ruler Cutting line illumination system Finger protection system Foot pedal Rear protective cages Emergency stop button Dwsbwxjyg Ic Eetbaeb Optional Features 1,000 mm backgauge system Rear sheet support and sheet sliding system for easy positioning and transfer of sheets to the rear System for dropping cut pieces to the front Adjustable front angle gauge 0–180° Front support arms available in custom lengths upon request Manual 750 mm backgauge with front-adjustable handwheel system Rear safety light barrier Technical Specifications Machine Type: A04/3060 Cutting Capacity (450 N/mm²): 4 mm Cutting Length (A): 3,060 mm Cutting Angle: 1.3° Cutting Speed: 41 strokes per minute Table Length (C): 800 mm Machine Dimensions (L × W × H): 3,600 × 2,250 × 1,400 mm Motor Power: 7.5 kW Weight: 4,000 kg