Used Felder Bf for sale (157)

Condition: excellent (used), Year of construction: 1999, operating hours: 650 h, functionality: fully functional, power: 4 kW (5.44 HP), Well-maintained, barely used, powerful professional machine with 5 combined functions. Numerous accessories included. Features a circular saw and table router with a sliding table, jointer and thickness planer, as well as a mortising machine. 5 motors, 360 V. The machine is available for sale immediately and is located in a ground-level basement in 23858 Reinfeld. Iodpfx Aszn I Aaobneba Transportation is the responsibility of the buyer.

Condition: used, Combined Machine FELDER BF6-26 -used- Tilting circular saw, Angle-mitre fence, Tilting spindle moulder, Isdexlt Shopfx Abneba Spindle moulder with forward and reverse rotation, Self-adjusting cutterblock ----- Technical Data ----- Planing width: 260 mm, Number of knives: 2 pcs, Cutterblock diameter: 86 mm, Passage height: 220 mm, Planer table length: 1300 mm, Cutting width: 780 mm, Circular saw tilting range: 0-45°, Spindle moulder diameter: 30 mm, Spindle moulder tilting range: 0-45°, Usable spindle moulder length: 120 mm, Max. cutter diameter: 220 mm, Max. retractable cutter diameter: 180 mm, Spindle speeds: 3500/6100/7800 rpm, Motors: 3 units, Extraction port for planer: 120 mm, Extraction port for saw: 120 mm, Extraction port for spindle moulder: 120 mm

Condition: good (used), Year of construction: 1990, functionality: fully functional, planing width: 310 mm, cutting width at rip fence: 80 mm, Panel saw, milling machine, planer, mortising machine, combination woodworking machine, table saw, circular saw, joiner's saw, panel saw, table router, tilting spindle moulder Manufacturer: FELDER Model: BF6-31 Year of manufacture: 1990 Sliding carriage: 1.6 m Manual height adjustment for saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment up to approx. 80 cm Support table Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the spindle Manual spindle tilt up to 45° to the rear Spindle diameter: 30 mm 3 speeds, adjustable by belt Spindle retractable below table and removable Ibsdpsyzdnbsfx Abnoa Motor power of milling unit: 3 kW Milling fence with fine adjustment Surface and thickness planer Planing width: 31 cm Maximum workpiece height: approx. 22 cm Central dust extraction hood for planing and thicknessing Tilting fence 2-knife Felder cutterblock system Motor power: 3 kW Mortiser Single-lever control Workpiece hold-down Chuck up to 16 mm

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 30B.11.040.22, functionality: fully functional, TECHNICAL DETAILS Working area, X-axis: 3,300 mm Working area, Y-axis: 1,280 mm Working area, Z-axis: 250 mm Travel, X-axis: 4,000 mm Travel, Y-axis: 1,670 mm Travel, Z-axis: 500 mm Milling spindle Number of milling spindles: 1 Max. spindle speed: 24,000 rpm Main motor power: 11 kW Tool clamping system: HSK-F63 Table design: Cantilever table Table length: 3,300 mm Table width: 1,280 mm Material clamping: Pneumatic Drilling unit Drilling tools available Horizontal drilling spindles: 4 Vertical drilling spindles: 12 Tool changer positions: 12 MACHINE DETAILS Ibodpjzrmuvefx Abnoa Controlled axes: 4 Software: WoodFlash Voltage: 400 V Current consumption: 40 A Connected load: 18 kW Dimensions & Weight Dimensions (L x W x H): 6,250 x 3,494 x 2,300 mm Shipping dimensions (L x W x H): 5,300 x 2,350 x 2,400 mm Shipping weight: 4,000 kg Shipping packages: 2 EQUIPMENT Sawing unit Vacuum pump Becker PICCHIO 2200, year of manufacture 2022 Safety light curtain Manual control panel Tools CNC documentation with user keys/licenses and USB stick Documentation CE marking

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, operating hours: 65 h, travel distance X-axis: 3,720 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 225 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 85 mm, Equipment: CE marking, The machine is a former trade show model with only 65 operating hours! Ibsdpfx Abjzrfhbensa An inspection with the machine running is possible at the end of August, as the contact person will be on-site then. TECHNICAL DETAILS Travel range X-axis: 3,720 mm Travel range Y-axis: 2,500 mm Travel range Z-axis: 225 mm Workpiece width max.: 2,100 mm Workpiece height max.: 85 mm Number of axes: 3 Tool magazine capacity: 15 Table length: 3,720 mm Table width: 2,100 mm MACHINE DETAILS Type of operation: electric Dimensions (L x W x H): 9,766 x 4,789 x 2,288 mm EQUIPMENT CE marking Documentation/Manual

Condition: used, functionality: fully functional, Felder FS900K edge sanding machine Sanding belt width: 150 mm Ibjdjzu Il Iepfx Abnea Sanding belt length: 2200 mm Sanding belt oscillation Motor power: 3 kW

Condition: used, Year of construction: 2021, Dust extraction system Manufacturer: Felder Type: RL 300 Year of manufacture: 2021 - Like new, never used - Technical data - Airflow rate: max. 6000 m3/h Ibedpfx Aozu Ai Ijbnsa - Rated airflow rate at 20 m/s: 5090 m3/h - Negative pressure at the total connection at 20 m/s: 2680 Pa - Dust extraction connection (can be mounted on the left or right): 300 mm - Filter area: 50 m2 - Sound pressure: 75 dB - Chip collection container (liters): 2 x 250 l Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, - Grinding width: 1100 mm Ibedezuzcmspfx Abnea - Grinding height: 3 - 170 mm - Grinding length: 1900 mm Wide-belt sanding machine Manufacturer: Felder Type: FW 1102 P Year of manufacture: 2021 Technical data - Contact roller unit - Fine sanding with segmented, electro-pneumatic sanding shoe, 25 mm segment width - Touchscreen color display 7" - Digital grit adjustment - Vacuum table incl. blower in the machine frame - Stepless feed speed 2.5 - 18 m/min, controllable from the touchscreen - Grinding width: 1100 mm - Grinding height: 3 - 170 mm - Grinding length: 1900 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2022, Panel saw Manufacturer: Felder Type: K 945S Year of manufacture: 2022 Technical data - Manual saw blade angle adjustment with angle indicator and handwheel - Parallel fence with round guide rail, D = 50 mm - Rip fence 2600 mm with mounting system for extension table 1300/1500 - Machine stand for K 945 S, saw blade table made of cast iron, including operating tools - Main saw motor 5.5 kW (7.5 HP), 3x400 V - PCS (Preventive Contact System) safety system - detects the approach of body parts - Tilting saw unit 90 - 45 degrees - Saw blade diameter range: 250-450 mm - Maximum cutting height: 155 mm - Electric height adjustment - Maximum cutting width: 1250 mm - Protective cover for 1250 mm cutting width with dust extraction connection (100 mm) - Sliding table, cutting length 2800 mm, anodized aluminum - Transport packaging for sliding table - Standard pallet 2100 x 1500 x 1500 mm - Extension table for cutting lengths 2500-3200 mm - Support surface: 1150 x 640 mm - Crosscut fence 3200 mm with 2 folding stops - 3 speed stages: 3500/4500/5500 rpm - Antistatic belt for PCS system Mobile dust extractor AF 22 - Power: 3.0 kW - 3 x 400 V, 50/60 Hz - Standard dust filter - Connection nozzle: 120 mm and 80 mm Ijdpfx Abjzuy Rcjnjba Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, Vertical panel dividing saw Manufacturer: Felder Format4 Type: Kappa V80 Year of manufacture: 2021 Technical data Saw unit Motor with 5.5 kW power Iedpfx Aezuy Dvebnoba Saw blade diameter: 300 mm Cutting depth: 80 mm Cutting length: 5300 mm Cutting height: 2200 mm Maximum horizontal cut: 2080 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, - Cutting width: 1250 mm - Cutting length: 2800 mm Panel saw Manufacturer: Felder Format4 Type: Kappa 550 Year of manufacture: 2021 Technical data - Saw blade: 250 - 550 mm - Cutting height: 202 mm (90°), 140 mm (45°) - 3 speeds: 3000/4000/5000 RPM - Cutting width: 1250 mm - Cutting length: 2800 mm - Control system: Kappa 550 e-motion - Surface area of the extension table: 1250 x 650 mm Iodpfx Abezuy A Esnoba - Telescopic fence allows for crosscuts up to 3200 mm - The crosscut fence can be swivelled from 90° to 45° - Circular saw extension of 1200 mm behind the saw blade axis - The positioning of the parallel fence is done electronically via a ball screw integrated dust-free into the circular saw table Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, - Edge joining unit - Teflon-coated gluing unit - Miter saw unit - Multifunction milling unit x-motion PLUS, flush and radius milling unit - Edge processing unit - Radius grooving unit - Polishing unit Edge banding machine Manufacturer: Felder Format4 Type: Tempora60.06LX Year of manufacture: 2021 Technical data Control system: x-motion PLUS Chain feed Feed speed: 10 m/min Drive motor: 0.75 kW (S6) - 1.1 kW (S6) Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm The minimum workpiece width varies depending on the workpiece length, height, and surface texture. Rotary table edge magazine for edge banding material Diameter of the rotary table: 750 mm Edge thickness: 0.4 - 3 mm Pull-out frame Pull-out workpiece support, extendable up to 450 mm Upper pressure bar Manually adjustable workpiece height: 8 - 60 mm Edge feeder for edge banding and strip material Edge joining unit: 2.2 kW, diamond cutter Z2 Speed: 12,000 rpm, 2 x 1.1 kW Teflon-coated gluing unit for 1.5 kg of EVA or PUR granules Ready for use after only 10 minutes of heating time Tool-free quick-change system Pressing unit, pneumatically controlled 1 driven and 2 tapered pressing rollers form the pressing zone Shear cutter for edge banding material, 0.4 - 3 mm thickness Miter saw unit with two high-frequency motors 0.35 kW, 12,000 rpm Pneumatically swiveling 0 - 10 degrees Multifunction milling unit x-motion PLUS, flush and radius milling unit 1 high-frequency motor above and below, 0.75 kW, 12,000 rpm, each with 4 interchangeable cutters Edge processing unit For soft-forming and post-forming workpieces, for processing the end edge with 0.4 - 3.0 mm edge thickness and 10 - 60 mm workpiece height 2-axis motor-controlled radius grooving unit including pneumatic retraction function Polishing unit Above and below Note: Ibjdezuyh Ijpfx Abnea The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2021, Technical Data Automatic Central Lubrication Working Area Axis Travel X = 4000 mm Y = 1670 mm Z = 500 mm Working Range X = 3300 mm Ibjdszux Iajpfx Abnja Y = 1280 mm Z = 250 mm, clearance height depending on the clamping system Operator Terminal on the Left Side of the Machine Handheld Terminal for Controlling Axis Speed, Including an Emergency Stop Switch Machine Software: Woodflash Consisting of: - CNC Board - Tool Database - Program Editor Position Indicator for Workpiece Support and Vacuum Suction Cup Vacuum Connection for Template Milling on the Left Side of the Machine: Connection: 12 mm 1 Vacuum Pump with a Total Suction Capacity of 90 m3/h at 50 Hz or 108 m3/h at 60 Hz Milling Spindle 12 kW (S6) HSK F63 12 kW (S6) Full Rated Power at Approximately 12,000 RPM Speed: 1000 - 24,000 RPM Air-Cooled C-Axis 0-360 for Milling Spindle 12-Position Linear Tool Changer on the Left Side of the Machine Frame, Including a Pickup Station for Aggregates Max. Tool Diameter: 250 mm Max. Tool Length: 240 mm Drilling Head DH 16 4H 2S 12 Vertical Spindles 7 Spindles in the X-Direction and 5 Spindles in the Y-Direction 4 Horizontal Spindles 2 Spindles in the X-Direction and 2 Spindles in the Y-Direction Pre-Travel = 70 mm Drilling Length = 70 mm Shaft Diameter D = 10 mm 2 Nut Saws, One Each in the X and Y Directions Max. Saw Blade Diameter: 120 mm Max. Blade Thickness: 5 mm Max. Speed, Continuously Adjustable: 7500 RPM Safety System with Light Curtain on the Front

Condition: used, Year of construction: 2019, CNC Machining Center FELDER FORMAT4 Profit H200 13.33 Year of manufacture: 2019 New machine (used only for demonstration purposes in a school) Number of axes: 4 X-axis travel: 4000 mm Y-axis travel: 1670 mm Z-axis travel: 500 mm Technical specifications Spindle power: 12 kW Spindle speed: 24,000 RPM Additional information Working area (maximum panel size) X: 3300 mm Y: 1280 mm Z-distance: 250 mm Spindle: Tool interface: HSK F63 Rated power at: approx. 12,000 RPM Cooling: Air-cooled Rotation: CW / CCW Tool magazine Linear tool magazine (mounted on the side): 12 positions Additional linear magazine on the gantry: 4 positions Max. tool diameter: 250 mm Max. tool length: 300 mm Drilling unit Model: DH 24 6H 2S Vertical spindles: 18 (12 in X, 6 in Y) Horizontal spindles: 6 (4 in X, 2 in Y) Max. drill length: 70 mm Max. tool diameter: 10 mm Dadoing machines: 2 (X and Y) Max. saw blade diameter: 120 mm Max. speed: 6,000 RPM Isdpfxezuxi Re Abnjba Vacuum table 6 supports (instead of 4) Two-circuit vacuum system Height of vacuum cups: 100 mm Pneumatic support locking Adjustable side stops (Y-axis) Axis system X-axis: Rack and pinion drive Y/Z-axis: Ball screw drive Linear guides in all axes Automatic central lubrication Control and software CNC control with CAD/CAM software 3D simulation preview DXF import capability Parametric programming Remote maintenance package (internet-enabled)

Condition: used, Year of construction: 2025, table length: 3,100 mm, table width: 2,100 mm, Technical data - Table size: 3100 x 2100 mm - 4-axis main spindle - Linear tool changer, 16 positions - 2 vacuum pumps Ibodpfx Ajzuw Tzobnea - 12 vertical drilling spindles - 1 dado blade

Condition: used, Year of construction: 2017, operating hours: 9,370 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X-axis working area: 3000 mm - Y-axis working area: 1550 mm - Z-axis clearance: 150 mm Main Spindle - 5-axis electric spindle - 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Speed range: 1,000 - 24,000 rpm - Ceramic bearings - Liquid-cooled spindle - Clockwise/counterclockwise rotation - Integrated tool changer interface - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System Linear Tool Changer - 12-position - Interface for tool holders - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm Disc Tool Changer - 18-position - Mounted on the traversing portal - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Circular Saw Blade Changer - Maximum saw blade diameter: 350 mm Drilling Unit Ibsdpfezuw H Ijx Abnea DH18 6H 2S Drilling Head - 12 vertical spindles: 7 in the X-direction, 5 in the Y-direction - 6 horizontal spindles: 4 in the X-direction, 2 in the Y-direction - Drilling stroke: 70 mm - Maximum drill length: 70 mm - Tool holder diameter: 10 mm - Individual drive for each spindle Dadoing Saws - 2 dado saw blades: 1 in the X-axis, 1 in the Y-axis - Maximum saw blade diameter: 120 mm - Maximum saw blade thickness: 5 mm - Speed adjustable up to 6,000 rpm Vacuum and Clamping System Console Table - 6 consoles - Front and rear programmable stops - Wireless dual-circuit vacuum system - Height of vacuum suction cups: 100 mm - Pneumatic console locking - 4 adjustable side stops - Additional support arms Vacuum Pump Flow Rate: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz Additional Vacuum Equipment - Vacuum connection for template machining (left side) - Additional vacuum connection for template milling (right side) - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air control for all consoles WoodFlash Software Package Control Panel - Complete machine control - Loading and execution of programs - Tool and machining management - Sensor monitoring - Manual machine commands Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB port Handheld Control for Feedrate Control - Feedrate override - Emergency stop button - Manual feedrate adjustment during machining Safety Devices - CE safety system - Light curtain safety system - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Vacuum and compressed air sensors - Additional safety mat system Operating Hours: 9370 hours

Condition: used, Year of construction: 2018, operating hours: 6,442 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X working area: 3000 mm - Y working area: 1550 mm - Z clearance: 250 mm Axis Systems - X-axis: Helical rack and pinion drive - Y-axis: Precision ball screw drive - Z-axis: Precision ball screw drive - Linear guides on all axes - Automatic central lubrication Main Spindle - 5-axis electro spindle - Type: 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Ceramic bearings with air cooling - Full power available at approximately 12,000 rpm - Speed range: 1,000 - 24,000 rpm - Clockwise rotation - Integrated tool changer interface - Liquid-cooled spindle Ibedjzuw E Ropfx Abnoa - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System 12-position linear tool magazine - Mounted on the left side of the machine frame - Separate station for tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm 18-position disc tool magazine - Mounted on the gantry - Suitable for drilling tools and tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Drilling Aggregated Head DH18 6H 1S drilling head - 12 vertical spindles: 7 spindles in the X direction, 5 spindles in the Y direction - 4 horizontal spindles in the X direction - 2 horizontal spindles in the Y direction - Drilling stroke: 70 mm - Maximum drilling depth: 70 mm - Tool holder: 10 mm - Individual control of the spindles - Integrated slotting saw - Saw blade diameter: 120 mm - Maximum slotting saw blade thickness: 5 mm - Speed up to 7,500 rpm Vacuum and Clamping System Console Table - 6 consoles with front and rear stops - Wireless two-circuit vacuum system - Height of vacuum cups: 100 mm - Pneumatic console locking - Programmable pneumatic stops - 4 adjustable side stops - Reinforced support arms - Load-bearing capacity of the support arms: 40 kg each Vacuum Pump Capacity: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz - Additional vacuum connection for template machining - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air switching for all consoles WoodFlash Software Package Control Panel - Complete machine operation via the CNC panel - Program creation and editing - Tool and workpiece management - Manual machine commands - Monitoring of vacuum, compressed air and safety systems Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB connection Operator Device for Feed Rate - Manual feed override potentiometer - Variable feed rate adjustment during machining Safety Devices - CE safety system - Safety mats instead of light curtains - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Sensors to monitor vacuum and compressed air Optional Equipment - External release switch - Protected energy chain system - Additional locking for A and C axes - Saw blade changing station on the gantry - Operating hours: 6442 hrs.

Condition: used, machine/vehicle number: G-KF131799aH, Format circular saw milling machine Hammer B3 Winner, year of manufacture 2023, as new, standard equipment, 2x3 kW, 2000 mm table length, 500 kg Ibsdpfx Abevw Ectsnja Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, machine/vehicle number: G-KR114377bH, Felder K7 circular saw, very good condition, 3000 mm table length, 600 kg Ibsdpfx Abevw Ecyjnea Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Band saw Felder FB510, year of manufacture 2019, very good condition, standard equipment Ibedpfxsvr I I Ie Abnsa Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, AD Planer Hammer A3-31, good condition Ibedpewzzhfofx Abnoa Price changes reserved, subject to errors, printing and typographical mistakes.

Condition: used, Bandsaw Hammer 4400, in very good condition, 1.5 kW, approx. 110 kg Price changes reserved, errors, printing and typographical mistakes excepted. Ibodpjx H Ud Refx Abnoa

Condition: used, AD planer Hammer A3, year 2018, in very good condition, hardly used, 310mm planing width, incl. 1 set of spare knives (reversible knives), 3 kW, 3 knives, 300 kg Ijdpfx Aowzzfkebneba Subject to price changes, errors, and misprints.

Condition: used, Felder KF700S/03 panel saw-milling machine, year of manufacture 2006, good condition, including folding device for feed and tenon hood, 5.5 kW S6, 3200 mm panel table length, 3500,6500,8000,10,000 rpm, 780 kg Ibedpfx Aswzzh Ssbnsa Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, machine/vehicle number: G-ADHM118054aR, AD planer Hammer A3-41, year of manufacture 2019, very good condition, including reversible blade and chassis, 4 kW, 1800 mm table length, 410 mm table width, 3 blades, 350 kg Prices subject to change, errors, printing and typesetting errors reserved Ibjdpfxevw Ebpj Abnsa