Used Notching Machine for sale (65,024)

Condition: as good as new (ex-display), plate thickness 2.0 mm tube diameter max. 60.0 mm motor 400 Volt Nedpjw U U Tyefx Ahkoda

Condition: used, functionality: fully functional, Year of construction: 1993, machine/vehicle number: 398, control type: manual, degree of automation: manual, actuation type: hydraulic, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, input frequency: 50 Hz, type of input current: three-phase, overall weight: 900 kg, cutting length (max.): 150 mm, Equipment: angle stop, foot remote control, Cutting performance (90° notch) - Normal steel: 4.0 mm - Stainless steel: 3.0 mm Cutting angle: 30-120° Cutting length: 150 x 150 mm Nedpsvk I Avefx Ahkoda Working height: 900 mm Table: 1000 x 650 mm Motor power: 3.0 kW Weight approx. 900 kg Dimensions: 1250 x 1000 x 1160 mm (LxWxH) Equipment: - Angle adjustment 30° - 120 ° continuously - 2 digital displays for the adjustable stops * Set-up stroke * Single stroke * Continuous stroke - Plexiglass protection for better transparency - Hardened blades also for cutting stainless steel - Adjustable stroke height setting - Removable cutting container - Freely movable foot switch BOSCHERT angle adjustment: - the one-piece 30° The upper blade is directly connected to both a left and a right lower blade within a tool - for each notch over 30°, the notch is made once to the left and once to the right. - the swivel adjustment is carried out pneumatically immediately after the first notch has been completed. The machine can be demonstrated on site with power on. All information is provided without guarantee. Subject to errors and prior sale.

Condition: used, Notching Machine COMACA type N/EPAS Maxi Sheet thickness: 3 mm Table size: Length 1050 mm x Depth 700 mm Ends tables dimensions: 900 x 470 mm Throat depth: 110 mm Orientable stop Blade length: 225 x 225 mm Voltage: 380 V Total length with ends tables: 2900 mm Length: 1200 mm (with retreated ends tables) Ndodszwcmljpfx Ahkja Depth: 800 mm Total height: 1100 mm Weight: approx 1 T

Condition: used, Year of construction: 2000, plate thickness 3 mm blade length 225 x 225 mm Nedpoxyacpjfx Ahkjda cutting angle 90 ° throat 110 mm strokes per minute 45 total power requirement 2,5 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1 x 1 x 1,2 m

Condition: good (used), Schmedt PraCut 6501 Notching Machine Very good condition, ready to work. A machine for cutting the spine to increase the area of ​​glue application and to cut the spine fold. This makes the block much more durable and binding becomes faster. Manufactured by Schmedt, Germany. Technical data: Book block thickness: up to 90 mm Book block height: up to 350 mm Requires air supply Power supply: three-phase 380V Ndodpfxoztn T Ae Ahkoa Productivity: about 250-350 pieces per hour.

Condition: used, Year of construction: 1970, rechts Ausklink / links S fence elektronisch ja /nein foot pedal mechanisch Ndedpfjztf Ahox Ahkja weight of the machine ca. 1,3 t

Year of construction: 1990, condition: ready for operation (used), A hydraulic Euromac notching machine is available. Notching capacity steel/stainless steel: 6mm/5mm, blade length: 220mm, working angle: 90°, angle adjustment: 30°-140°, stroke rate: approx. 50/min. Machine dimensions X/Y/Z: approx. 1100mm/950mm/1300mm, weight: approx. 800kg. An on-site inspection is possible. Ndsdpfxozd Ei As Ahksa

Year of construction: 2021, condition: ready for operation (used), A Boschert notching machine with an integrated punching station is available. Cutting angle range: 30°-120°, punching capacity: 15t, punching diameter range: 9.19mm-91.87mm, cutting length range: 53.85mm-53.46mm, max. sheet thickness: 10mm, punching force: 15t, stroke rate: 40/min, table dimensions X/Y: 1000mm/650mm, machine dimensions X/Y/Z: approx. 1250mm/1000mm/1200mm, weight: approx. 2000kg. Documentation vorhanden. An on-site inspection is possible. Ndedpfx Asyugl Ishkea

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, control type: manual, cutting angle (min.): 30 °, cutting angle (max.): 140 °, sheet thickness (max.): 6 mm, overall weight: 800 kg, total length: 1,100 mm, total width: 950 mm, total height: 1,280 mm, Equipment: CE marking, Manufactured by Euromac (Italy) Year of manufacture 2006 Variable cutting angle, degrees 30° – 140° Blade length, mm 220 Max. sheet thickness, mm 6,5 Table size, mm 950 x 1030 Power required, kW 4,0 Machine dimensions, mm 1100 x 950 x 1280 Machine weight, kg 800 Ndjdpfxjzudyze Ahkja The notcher additionally is equipped with radius tool and rectangular slot punch 25x100 mm. Under power.

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Njdpfx Ahemck Ryjksda Weight approx. 1000 kg good condition

Condition: used, Year of construction: 1996, machine/vehicle number: 206988, Order No. 24554 Technical Specifications: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm - Continuous cutting angle adjustment from 30 to 135° - Stroke rate 60 rpm - Table support surface with T-slots 800 x 1000 mm Ndedov Uytzepfx Ahkja - Depth stops with measuring scale and angle adjustment - Table height 860 mm - Drive 400 V / 2.2 kW - Electric - Foot switch - Space required approx. W 1000 x H 1650 x D 1700 mm - Weight approx. 1100 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: V 254326, Offer 22407 Nodpfx Aheif Aqvskoda Technical data: - Cutting length: 250 mm - Cutting angle: 90° - Cutting thickness: - Normal steel: up to 4 mm - Stainless steel: up to 3 mm - Aluminum: up to 5 mm - Stroke rate: up to approx. 55/min - Table size: W 800 mm x D 800 mm - Working height: approx. 940 mm - Stops adjustable steplessly in length and degrees - Drive: 400 V / 4 kW - Oil capacity: 50 l - E-foot switch - Space requirement: approx. W 800 mm x H 1250 mm x D 900 mm - Weight: approx. 700 kg

Year of construction: 1996, condition: good (used), machine/vehicle number: 9182, Offer 23168 Technical data: - Notching possibilities + miters in 3 planes - right-angled, one-sided + two-sided + three-sided oblique . - Can be used as a shift cut crosscut saw Njdpfemb U E Aox Ahkeda - Pneumatic profile clamping Machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3,5 x 40 mm positive - horizontal 500 x 3,5 x 40 mm negative - notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. positioning with digital display - Swiveling range saw blade horiz. with vert. saw blade Saw blade - 45° - 90° - 45° mot. positioning with digital displays - Notching height adjustment with digital displays - profile stop shoulder manually tiltable 30° - 90° - 45° - pneumatic coolant check device - air connection 6 bar - drive 400 V / 2 x 3 kW - space requirement approx. W 2400 x H 2000 / D 1400 mm - weight approx. 1200 kg

Year of construction: 1995, condition: good (used), machine/vehicle number: 8883, Offer 26051 Technical Specifications: - Feed of the milling unit manual - Worktable height adjustable via handwheel - Horizontal and vertical material clamping - Cutter diameter up to 300 mm - Max. milling height 150 mm - Max. milling depth 110 mm - Max. milling length 500 mm - Angle-adjustable stop left & right 20° - 90° - Spindle speed 2800 rpm - Drive 400 V 2.2 kW Ndsdpfxoyz S Trs Ahksa - Compressed air connection 6 - 8 bar - Air consumption per cycle 10 l - Pneumatic profile clamping - Spray device - Space requirement approx. W 1300 x H 1450 x D 1100 mm - Weight approx. 300 kg

Year of construction: 1996, condition: good (used), machine/vehicle number: 598, Offer 22391 Technical data: - Cutting length up to 200 mm - Cutting thickness: - Steel with 400 N/mm² tensile strength: 6 mm - Stainless steel with 600 N/mm² tensile strength: 4 mm - Stepless cutting angle adjustment: 30 - 120° - Pneumatically clamped - Automatic cutting gap adjustment - Locking stops on the left and right, each 300 mm - Table surface area: 1000 x 800 mm Nsdpfx Aoiqgd Eohkeda - With T-slots and depth stops - Table height: approx. 900 mm - Depth stops - Drive: 400 V / 4 kW - E – foot pedal - Space requirement: approx. W 1000 x H 1350 x D 1510 mm - Weight: approx. 1800 kg

Year of construction: 1990, condition: good (used), machine/vehicle number: V 206 769, Offer 22346 Technical data: - Cutting length up to 200 mm - Cutting thickness: - Steel up to 6 mm - Stainless steel up to 4 mm - Stepless cutting angle adjustment: 30 - 135° - Stroke rate: 60 1/min - Table surface with T-slots: 800 x 1000 mm - Depth stops with measuring scale and angle adjustment - Table height: 860 mm - Drive: 400 V / 2.2 kW - E. - Foot switch - Space requirement: approx. W 1000 x H 1650 x D 1700 mm Njdsi Hpdyopfx Ahkjda - Weight: approx. 1300 kg

Condition: good (used), Year of construction: 2000, machine/vehicle number: M 100-34 E3-D, Offer 24371 Technical data: - Machine for the production of closed cold-formed corners - Material thicknesses 0.8 to 2.5 mm - max. achievable shelf height see table - min. Workpiece length / min. workpiece width 120 mm Ndsdpfxou Rarte Ahkja - Production time per formed corner, independent of material 10 sec. - Drive 400 V / 4 kW - Control panel with E - foot switch - Space requirement station 1 approx. W 1100 x H 1650 x D 1100 mm - Weight of station 1 approx. 800 kg - Space requirement for station 2 approx. W 800 x H 1400 x D 900 mm - Weight of station 2 approx. 500 kg

Condition: good (used), Year of construction: 1980, machine/vehicle number: PN 0312, Offer 26138 Technical data: - 90° cutting head, pneumatically operated Ndsdpfxey U Hv Ue Ahksa - Cutting thickness: - Normal steel: up to 2 mm - Stainless steel: up to 1.5 mm - Aluminum: up to 3 mm - Blade length: 130 mm - Table size: W 600 x D 380 mm - Working height: 940 mm - Foot pedal - Compressed air requirement: 6 - 8 bar - Space requirement: approx. W 600 x H 1250 x D 850 mm - Weight: approx. 180 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: V 254629, Offer 25311 Technical Data: - Cutting length: 250 mm - Cutting angle: 90° - Cutting capacity: - Mild steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate: up to approx. 55 / min - Table size: W 800 x D 800 mm - Working height: approx. 940 mm - Stops infinitely adjustable in length and angle - Drive: 400 V / 4 kW - Oil filling: 50 l - Electric foot pedal - Required space: approx. W 1300 x H 1250 x D 1300 mm - Weight: approx. 800 kg Ndodpfx Ahexqzirjkja - Mobile base frame

Condition: used, Year of construction: 1992, machine/vehicle number: 27123, Offer 25466 Technical Data: Nodpfxjyfchgo Ahksda - Cutting length up to 125 mm - Cutting thickness - at 400N/mm² tensile strength: 4 mm - at 700N/mm² tensile strength: 2.5 mm - Aluminium, plastic: 6 mm - Cutting angle: 90° - Depth stops - Foot pedal - Space requirements approx. W 700 x H 1400 x D 800 mm - Weight approx. 150 kg

Year of construction: 1990, condition: good (used), machine/vehicle number: V 254xxx, Item No. 22462 Technical data: Nodjiluqmjpfx Ahkeda - Cutting length 250 mm - Cutting angle 90° - Cutting thickness: - Normal steel up to 4 mm - Stainless steel up to 3 mm - Aluminum up to 5 mm - Stroke rate up to approx. 55/min - Table size: W 800 x D 800 mm - Working height approx. 940 mm - Stops adjustable continuously in length and degrees - Drive: 400 V / 4 kW - Oil capacity: 50 l - E - Foot pedal - Space requirement approx. W 800 x H 1250 x D 900 mm - Weight approx. 700 kg

Condition: ready for operation (used), Blade length: 130 x 130 mm Cutting length: 130 mm Max. cutting capacity at 45/70 kg strength: 3/2 mm Cutting angle: 90° Stroke rate: 50/min Table dimensions: 460 x 600 mm Ndedsznh Ivjpfx Ahkoa Space required: 650 x 600 x 1250 mm Weight, approx.: 170 kg

Condition: good (used), Year of construction: 2009, Technical data can be seen on the data plate! Ndsdpfxewqmrhs Ahkja

Condition: good (used), functionality: fully functional, motorized notching machine, 4 stations, drive power 2.2 kW Nsdpfjzqgztjx Ahkeda

Condition: good (used), functionality: fully functional, Year of construction: 1991, sheet thickness steel (max.): 6 mm, power: 0.004 kW (0.01 HP), overall weight: 1,600 kg, Cutting 6 mm at 400 N/mm² 4 mm at 600 N/mm² Ndjdpjzp Dr Tofx Ahkea Stepless angle adjustment 30 - 120° Drive power approx. 4 kW