Used Four Side Moulder for sale (682)

Condition: new, Year of construction: 2025, IF-100 moulder infeed (100 m/min). Max length 6m. The flat chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow correct operation of the infeed. Hnjdpfx Ahoxhfycs Nog OF-100 moulder outfeed. Automatic deposit on a belt conveyor and cross infeed. Manual destacking Approx. floor space requirement: length 8m, width 2,5m . Suitable for max 100m/min feed speed.

Condition: excellent (used), Year of construction: 2020, The Armor HV horizontal moulder includes all the features of the Armor Tradition model, but also is reinforced to keep higher daily rates. The included Tradition Pack will allow you to limit the degassing of your dough. Up to 1 800 pieces/h. Dough pieces from 50g to 2000g. Hnedjwt Tnhspfx Ah Njg Retactable belt. Belt dimensions 700mm W x 29mm L

Condition: like new (used), Globe Baguette machine in good working condition for more information please sent a request Hnsdpfx Aoumn Dujh Njg

Condition: used, Moulder IDC000075 - manufacturer: Wadkin - model: GA 220 Hsdpfjtwy T Rox Ah Neng - 4 years ago made renovation

Condition: excellent (used), Merand Baguette Machine in good working condition Hodjkzh Ehopfx Ah Neng

Condition: good (used), Year of construction: 1999, Working width 13-230 mm Working height 6-120 mm 4 spindles u-r-l-o Feed motor power 1.5 kW Sico counter Steel infeed rollers One rubber outfeed roller External dimensions approx. L x W x H 3100 x 1400 x 2000 mm Weight approx. 2000 kg The data is taken from a brochure, therefore no guarantee is given. Hedpfex U Ru Ujx Ah Nsng

Condition: used, heavy-duty tilting spindle moulder Martin T27 automatic tilting – 46° automatic height adjustment precision fence with fine adjustment control panel at eye level, swivelling, with 5.7" touchscreen spindle travel 150 mm spindle diameter 30 mm spindle with 6 speeds: 3,000 to 10,000 rpm motor 7.5 kW with electric brake machine is WORKSHOP TESTED – TOP CONDITION first delivered in 2010 machine from school environment only approx. 300 operating hours available from stock Lieboch Hodpfx Ajx U Arxsh Neng

Condition: like new (used), Year of construction: 2005, functionality: fully functional, working width: 230 mm, planing height: 120 mm, planer shaft diameter: 40 mm, workpiece height (max.): 120 mm, Weinig Unimat 300 — 4-sided planer 230 x 120 mm Although from 2005, this machine is practically like new! Rarely have we seen one so little used. Hjdpfx Ahox Upu Te Njng Looking for an almost-new 4-spindle planer but don’t have the budget for a new one? This Unimat 300 is the perfect pick!

Condition: used, Available: 2 pieces Price per piece: 239.00 € + VAT knife: Strip planer blade Z2+ chamfer cutter Hnjdpsx Tu Rwsfx Ah Nsg flight circle (ø): 125 mm drilling: 40 mm length: 170 mm material: steel

Condition: used, Year of construction: 1993, Catalogue number: 7705 TECHNICAL DATA - Max working width: 220mm - Max working height: 160mm – 4 spindles: 1) Bottom horizontal: 220mm, 5.5kW 2) Right vertical: 160mm 3) Left vertical: 160mm (2nd & 3rd spindle) 11kW 4) Top horizontal: 220mm with electric adjustment up/down, 7.5kW - All spindles adjustable up/down, right/left - Spindle diameter: 40mm - 4 top metallic, toothed feed rollers - 1 top double rubber outfeed roller - 1 bottom rubber outfeed roller - Feed via Kardana shafts - Stepless feed speed adjustment Hnjdpfx Ahsw Edgfj Neg - Feed motor: 2.2kW - Lifting motor: 0.55kW - Electric planing thickness adjustment - Infeed table length: 1970mm - Central lubrication - Extraction nozzle diameter: 3x120mm, 140mm - Enclosed cabin - Dimensions (L/W/H): 3500x1600x1500mm - Weight: 1620kg Net price: 33,900 PLN Net price: 8,070 EUR (based on 4.2 EUR exchange rate) (Prices may change with exchange rate fluctuations)

Condition: used, Year of construction: 2017, Overview The blowmoulder was built in 2017 by the manufacturer SIPA. The machine is until February 2026 in operation and can be visited. It is used in a mineral water factory. The blowing machine is in a very good condition due to regular maintenance. Technical data  Nominal capacity: 18.000 bph Nr. of moulds: 8 Last used formats: 0,5l 1,0l 1,5l Neck type: PCO-28-1810 Incl. preform feeding system Incl. preform cooling system Min. - max. bottle diameter: 50 - 125 mm Min. - max. bottle height: 80 - 349 mm Hjdpjx Ti R Ejfx Ah Nsng

Condition: excellent (used), Spindle moulder with sliding table and pneumatic clamp, including HolzHer ETZ feed unit. 4 feed speeds: 2 – 12 m/min. 3 new feed rollers. Table size: 1000 mm wide, 930 mm deep. 30 mm spindle. Heavy-duty construction. Milling fence with fine adjustment. 4.5 kW. Weight approx. 600 kg. Hnjdpfx Aoudwlzjh Njg

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 253-829, working width: 300 mm, planing height: 200 mm, spindle diameter: 50 mm, Weinig planer in perfect condition 5 spindles Hnjdpfx Ajx U U Dash Neg 2 bottom spindles 2 vertical spindles 1 top spindle Jointing systems on one top and one bottom spindle

Condition: excellent (used), Planer 9 heads Working width - 20 cm Hjdpfotrdwtox Ah Nsng Working height - 22 cm 5 pulleys in the table Heads 1 bottom 7.5 kW 2 right 11 kW 3 left 11 kW 4 right 11 kW 5 up to 11 kW 6 down 11 kW 7 up to 11 kW 8 down 11 kW 9 universal 11 kW PERFECT CONDITION!

Condition: used, Model: Spanavello brand moulding machine, 6+1 shafts, grooved bench, max. width mm.190 Shaft composition: below, right, left, right, above, below, universal, cardan shaft drive, used. Hjdjx Tt Diepfx Ah Neng

Condition: excellent (used), Catalogue number 7784 TECHNICAL DATA - Spindle diameter: 30 mm - Working height of spindle: 150 mm - Interchangeable spindle - Spindle locking - Adjustable up/down + angle - Original cast iron fence with full adjustment - 4 spindle speeds + left/right: 3000/5000/6000/10000 rpm - Table dimensions: 1120x800 mm - Motor: 3.7 kW - Dimensions (L/W/H): 1100x1400x1160 mm - Weight: 775 kg ADVANTAGES – German-made Hnedpfsxt I Adex Ah Njg – Used milling machine – Very good condition Net price: 6,900 PLN Net price: 1,640 EUR Net price calculated at a rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 96409, type of input current: three-phase, input voltage: 380 V, power: 73 kW (99.25 HP), input frequency: 50 Hz, input current: 159 A, We offer this used Weinig Unimat 23 moulder, year of construction 2002. Machine number: 96409 Machine type: Unimat 23 Year of construction: 2002 Circuit drawing number: B.96409 Operating voltage: 3 x 380 V 50 Hz Control voltage: 230 V 50 Hz Nominal current most powerful motor: 29 A Nominal current: 159 A Main fuse: 160 A Power: 73 kW If you have any questions or need more information, feel free to send us a message or give us a call. Hnjdpfx Ahex Ttydo Neg

Condition: used, • Speed (rpm): 2500/4500/6000 Hnodofndivopfx Ah Neg

Condition: repair required (used), Year of construction: 1991, Tilting spindle moulder Manufacturer: Panhans Hnedpfxjx Tgtwe Ah Nsg Model: 240 Year of construction: 1991 The electrical detection of the actual angle value does not function. Table: 260 x 80 cm Power: 11 kW Swivel range: -5° to +45° Angle adjustment: Electric Height adjustment: Electric Speeds: 3/4.5/6/9,000 rpm Left/right rotation: Yes Motor brake: Yes Weight: approx. 780 kg Incl. power feed unit

Condition: new, Catalog number: H0531 – new machine, in stock – tiltable spindle – with side trolley – CE certificate – DTR documentation in Polish TECHNICAL DATA spindle diameter 30mm spindle stroke 100mm max spindle diameter 180mm spindle adjustable at an angle of -5+45 degrees table dimensions 1000x360mm sliding table 1000x250mm 4 types of speeds 1800, 3000, 6000, 9000 U/min engine power 2.8kW/3.9kW exhaust nozzle diameter 100mm dimensions length/width/height 1150/1155/730mm Hjdpfxox Tgt Rj Ah Njng weight 270kg PRODUCT FEATURES Milling machine lower spindle - table FS 200SF is a massive construction with a table top made of grey cast iron with a high-quality gauge mounted to hold the processing element and high precision of adjustment. The price includes a milling machine with a sliding side carriage. FS 200SF with a tilting spindle is a device with a wide 4-step speed range: 1800/3000/6000/9000 It is successfully used for processing the edges of straight-line elements and for creating decorative strips, grooves, projections, tenons and dovetails The welded steel body and large cast iron table make it a very solid and stable machine, not susceptible to vibration A precise formatting table included Net price: PLN 14,100 Net price: EUR 3,350 Net price calculated according to the exchange rate of PLN 4.2 / EUR (in the event of greater exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7003 Technical Data: - Spindle diameter: 25mm - Spindle working height: 80mm - Interchangeable spindle - Spindle locking - Height adjustable (up/down) - Original cast iron fence - 2 speed options + right/left rotation - Table dimensions: 1000x800mm - Motor: 3kW - Dimensions (LxWxH): 1280x860x1100mm - Weight: 465kg Hodpfx Ajx Tgryjh Njng Features: – Bulgarian manufacture – Very good condition – Used milling machine Net price: 5,500 PLN Net price: 1,300 EUR (based on exchange rate of 4.2 PLN/EUR) (Prices may change due to fluctuations in the exchange rate)

Condition: new, Catalogue number: S0367 TECHNICAL DATA work table dimensions 800x800mm engine power S1/S6 3.0 / 4.4kW table hole diameter 190mm spindle diameter 30mm spindle tilt 0° -45° spindle speed 1400 / 3500 / 6000 / 8000rpm right, left rotation spindle vertical travel 175mm spindle working height 125mm max. tool diameter for shaping / for tenoning 180/250mm exhaust nozzle diameter 120mm dimensions length/width/height 2800x1800x1090mm weight 410kg Hnsdpox Tgrgofx Ah Nsg PRODUCT FEATURES Large, massive cast iron work table. Table hole diameter 190mm, with under-table exhaust. Electronic speed readout. Spindle protection for 180mm diameter. Spindle lock installed. 4 speeds. Spindle tilt forward ADVANTAGES – new machine – tiltable spindle – with side carriage – CE certificate Optional: – motor power 4.0 (5.5) kW (HP) – spindle protection for 250 mm contouring – integrated safety guides 350, 500 mm – table extension on the left and right side – spindle diameter 1 1/4, 32, 35, 40, 50 mm The price includes the milling machine with a sliding side carriage. Net price: PLN 17,200 Net price: EUR 4,100 depending on the price EUR 4.20 (Prices may change with higher fluctuations)

Condition: excellent (used), Catalogue number 7252 TECHNICAL DATA - Spindle diameter: 25 mm - Spindle working height: 170 mm - Spindle support Hjdjx S Iknepfx Ah Neng - Interchangeable spindle - Spindle lock - Table adjustable up/down - Original fence - 4 speed settings + right/left rotation: 3000, 4500, 6000, 9000 rpm - Table dimensions: 980x980 mm - Motor: 3 kW - Dimensions (L/W/H): 1100x1000x1370 mm - Weight: 682 kg ADVANTAGES – German production – Spindle support – Very good condition – Used milling machine Net price: 6,900 PLN Net price: 1,640 EUR at an exchange rate of 4.2 PLN/EUR (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7207 TECHNICAL SPECIFICATIONS - Spindle diameter: 30 mm - Spindle working height: 120 mm - Interchangeable spindle - Spindle locking - Adjustable height (up/down) - Original cast iron fence - 4 spindle speeds + right/left rotation - Table dimensions: 1060 x 770 mm - Cast iron table - Motor: 4 kW - Dimensions (L/W/H): 1060 x 1050 x 1070 mm - Weight: 510 kg ADVANTAGES – German-made – Used milling machine – Very good condition Hnedpfx Ahjx Syabe Njg Net price: 5,500 PLN Net price: 1,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 6856 TECHNICAL DATA - Spindle diameter: 30 mm - Spindle working height: 110 mm - Spindle locking - Electrically adjustable up/down + angle, 0.18 kW - Original guide with full adjustment - 5 spindle speeds + forward/reverse: 2900, 4400, 6000, 8000, 10000 rpm - Table dimensions: 1200x900 mm - Cast iron table - With electric brake - Motor approx. 7.5 kW - Extraction nozzle diameter: 150 mm - Machine dimensions (L/W/H): 1750x1200x1750 mm - Weight: 990 kg Hjdpfex R Dw Ujx Ah Nong ADVANTAGES – German-made – Tilting spindle – Brake – Used milling machine, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated according to exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)