4 sided moulder buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
Complete machine with automatic input and output! max input 3000mm scissor table 2000KG Mvzon max width on scissor table 2500mm With Groove bed 5 axes including groove bed 40mmØ 25pk more
11

4-SIDED MOULDER 7 SP WACO UN 200

9000 Aalborg, DanmarkDenmark
6326 km
1986
ready for operation (used)
GRAMA (DK) FEEDER, WACO MOULDER 200 MM. WORKINGWIDTH. MACHINE WITH 7 SPINDELS: BOTTOM, RIGHT, LEFT, TOP, BOTTOM (SAW), BOTTOM, TOP Bbolkqelam more
6

Four sided moulder Weinig U22N

Europa - NederlandNetherlands dealership location
6282 km
1980
used
Shaft diameter: 40 mm Feed-through motor: 4 kW Axle setup Lower axle 7.5 kW Right axle 5.5 kW Zaqwfwzd Left axle7.5 kW Right axle 5.5 kW Upper axle 5.5 kW Lower axle 11 kW Upperaxle 11 kW more
6
Automatic feeder for moulding machine with adjustable feeding motion adjusted by an hydraulic motion with clutch. Magazin not available in price (look at Photo of new machine) - but easy to make by yourself. 99fal3eat more
3
MACHINE DATA Koch Model BD-60-A Double sided Boring & Dowel Inserting Machine with vertical Hopper Feed Make: Koch Maschinenfabrik GmbH & Co KG Model: Koch Model BD-60-A Serial#: A0705/7617 Year of Mfg.: 2007 Condition: Very Good few working hours Was installed in the USA, Plant stopped working in late 2008-2009, low working hours! Purchased and packed in 2009, stored in a try Warehouse Facility in the US till now! DESCRIPTION ... more
1
Elect./Voltage: 240/480 V, 60 Cy, 3 Ph Bbuqhaofzb KUPER KLM Dual Glue Applicator --Dual glue applicator applies glue to veneer edges for later glue up. -- Specifications: --2" Min. x 15-3/4" max. veneer width, --15-3/4" min x unlimited veneer length --Dual vertical roll type glue applicators with glue pot reservoirs (one each side) apply glue. -- Approx. 8' long powered roll infeed, left hand fence line with multiple vertical round guides --Right hand side adjustable (in & out) for ven... more
7
Biesse Akron 840 Single Sided Edgebander Year 2005 End Trim Units Flush Trim Units Radius Trim Units Profile Scraping Units Flat Scraping Units Buffing Units Bbwkquoymv more
4

Baguette Moulder Sinmag SM 380 S

BabenhausenGermany dealership location
6588 km
2018
as good as new (ex-display)
Baguette Moulder Sinmag Model: SM 380 S Capacity: 50 - 1,200 g L7um7 Ausrollbreite: up to max. 800 mm Stainless steel version, mobile with undercarriage Connection: 400V, 16A-CEE plug Dimensions: 975 x 690 x 1650 mm, WxDxH with warranty more
2

Moulder 5+2 Sp REX Timbermaster U-41 K

Rivierdijk 409, 3372 BV Hardinxveld-Giessendam, NLNetherlands
6242 km
1991
ready for operation (used)
REX moulder, type Timbermaster U-41-K (A+D+FR+FL+AFV+HFR+AZG) Manufacture year 1991 Machine specifications - Planing width 410 mm - Planing height 260 mm (2-sides) - Planing height 210 mm (4-sides) Bbz9ats9xs - Feeding up to 30 m/min Spindle lay-out: 1. Horizontal bottom spindle, motor power 11 kW 2. Horizontal top spindle, motor power 11 kW 3. Vertical right spindle, motor power 7.5 kW 4. Vertical left spindle, motor power 15 kW #. 2 pc. chamfering units, each 1,85... more
3

F3 Tilting Spindle Moulder and Feed Unit Hammer

Moorgate Point 1, L33 7DR Liverpool, GBUnited Kingdom
5686 km
good (used)
4hp motor Spindle tiltable to 45 degress 30mm dia spindle 4 speeds 3000 / 6000 / 8000 / 10,000rpm H304 3 Roller power feed unit Ekdceph Year - 2000 CE Compliant Condition - Very Good more


4 sided mo...
every day

New machines via email!

Be informed!
4
MACHINE DATA Single-Sided Edge banding Machine, Make : Homag Model : KAL of Mfg. : 2004 Condition : Very good Was installed in the USA, Plant stopped working in late 2008-2009, low working hours! Purchased and packed in 2009, stored in a try Warehouse Facility in the US till now! Full Tech. Details and Documentation available upon request DESCRIPTION left-handed, single-sided edge-banding mach... more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Dg7wshz WOODSTORM L100 Lateral Chain Moulder Infeed;Increase productivity and save labor running your Feed Through [...]: -- The "L100's" cap. 3' - 16' long, 3/8" - 3-1/2" thick and 3/4" - 9-1/2" width;feed speeds of 20 - 120 FPM via inverter controlled drive to (2) bottom rollers. -- The feeder consists of 38" deep x 12' long lateral feeding (8) chain deck, a top & bottom roller infeed system, and a short bridge table that connects the chain deck to the... more
6
Homag Single Sided Edgebander Model Optimat KAL 310/5/A25/S1 2 Pre Milling Units End Trim Rough Trim M3o2p Fine Trim 18-24 m/min Feed Sound Enclosure GREAT FOR DOING SOLID WOOD EDGING!!!! Year 2006 more
3

Spindle Moulder SCM T55 W Elite S

The Railway Tinahely, Y14 TC97 Wicklow, IEIreland
5475 km
good condition (used)
F3yjxeb SCM T55 W Elite S Spindle Moulder - Very Lightly used full profile version - with support rollers and power feed. - Tennoning table and support hood and ring fence. - Electronic rise and fall, electronic 90-45 degree adjustment. - 9.5 HP 3 Phase, can use inverter. - Spare spindles and over €3000.00 in tooling. - 1 year old more
2

Moulder 5+2 Sp REX Timbermaster U-41 K

Rivierdijk 409, 3372 BV Hardinxveld-Giessendam, NLNetherlands
6242 km
1991
ready for operation (used)
REX moulder, type Timbermaster year 1991 Machine specifications - Planing width 410 mm - Planing height 260 mm (2-sides) - Planing height 210 mm (4-sides) - Feeding up to 30 m/min Spindle lay-out: 1. Horizontal bottom spindle, motor power 11 kW 2. Horizontal top spindle, motor power 11 kW 3. Vertical right spindle, motor power 7.5 kW 4. Vertical left spindle, motor power 15 kW #. 2 pc. chamfering units, each 1,85 ... more
6
Type: FK5 Second-hand machine Sled Spindle diameter 30 mm Speeds: 4 Height adjustment: Handwheel Power: 6kW Tckysc2om Circular saw, crosscut saw Year of construction: Location: Camp / 82281 Herrnzell more
4

ME20 Single Sided Hot Melt Edge Bander SCM

Moorgate Point 1, L33 7DR Liverpool, GBUnited Kingdom
5686 km
good (used)
SCM Minimax ME20 Single Sided Hot Melt Edge Bander - 2014 CE Bnmvueb0 Worktable dimensions 1950 x 180 Worktable height 904mm Thickness of rolled edges 0.4 - 2mm Max. thickness of edges in strips 5mm Min - Max panel thickness 12 - 50mm Feed speed 6m/min Equipped with Hot mely glue tank 0.5kg capacity Coil feed device with pneumatic guillotine Front and rear guillotines Top and bottm flush trmiing units x 12,000 rpm x 0.55kw PLC control Overhead feedbelt with digital readout Ad... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bbu8fyaxd3 WEINIG UNIMAT 500/017 "STANDARD" Moulder with ZEETECH 110 Hopper Feed;5-Head (B-R-L-T-B), working cap. 9-1/16" x 4-3/4". -- Head sequence: Bottom 10 HP, right/left 10 HP, top 15 HP, and bottom 10 HP motor. All motors with mechanical brakes. -- Spindle dia. 1-1/2" with cutterhead speed at 6,000 RPM; electronic digital readouts on all spindles for accurate setup. "Memory Redial" for for quick setup and profile storage of 200 profiles. Electronic ... more
6
Capacity 230 x 130 mm. Spindles: 7 Bottom 3,7kW, fence 3,7kW, near 7,5kW, fence 3,7kW, top 7,5kW, top 7,5kW, bottom 7,5kW Vpy9vc077 Spindle diameter: 40 mm. Feedmotor 2,2 kW more
6
Plate grinding machines, Disc Grinder, disc Sander Disc diameter 600 mm Table size 800 x 300 mm Table tilted negative 10° positive 45 ° Dimensions 1500/900/H1400 mm Weight ca. 800 kg M28xr -Year built: Circa 1975 Location: Off the shelf 54634 Bitburg -free load- more
2
Spindle moulder Spindle diameter 30 mm B8xb3obms more
1

Spindle moulder Schneider SK-02

PetershagenGermany dealership location
6478 km
1981
used
Manufacturer: Schneider Doppelspindelfräse, Type: SK-02, Year: 1981, Control: hand, Vertikal spindle: 2, revolutions rpm: 3000/4000/6000/8000/10000, Spindelhub: 150, Diameter of the spindle mm: 30, Spindle swivel-mounted max Grad: no, Main engine kW: 5,8, Feeding speed: no, Year :1981 Vqnr23 more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Gl0ppot20 WEINIG UNIMAT 500/017 Moulder Feed Through;5-Head (B-R-L-T-B), working cap. 9-1/16" x 4-3/4". -- Head sequence: Bottom 10 HP, right/left 10 HP, top 15 HP, and bottom 10 HP motor. All motors with mechanical brakes. -- Spindle dia. 1-1/2" with cutterhead speed at 6,000 RPM; electronic digital readouts on all spindles for accurate setup. Electronic readouts for chipbreaker and pressure shoe at top spindle. Motorized positioning radial of spindles ... more
10

Four-sided Planer LEDINEK SUPERLES 300 5V-S200

Neuzeller Str 42, 33449 Langenberg, DEGermany
6464 km
2000
ready for operation (used)
Four-sided Planer LEDINEK SUPERLES 300 5V-S200 Machine No.: 3139 Year: 2000 Condition: used, checked cleaned, ready for working Technical data: Working dimensions: Working width: 70 - 300 mm Working thickness: 15 - 200 mm Working length: min. 2,000 mm Table height: 1200 mm Feed speed: 40 - 200 m / min. drive motors Surfacing spindle : 37 kW Thickness spindle: 45 kW Vertical spindle left: 20 kW Vertical spindle right: 20 kW Feeding: 37 kW Lift gear... more
6
Single sided edge bander with hot melt, fixed side at the right Edge thickness: 0,4 to 3 mm Workpiece thickness: 8 to 42 mm Min. workpiece width: 70 mm Feedspeed 12 m/min Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors [...] Equipment: Edge magazine, guillotine for 3 mm edges Hot melt unit Us7zqieyg Pressure zone with1 driven and 3 non-driven rollers End trims, 2 motors of 0,18 kW Top/bottom fine and radius trimming, tilting, 2 x 0,5 kW... more
6
Single sided edge banding machine Brand: Homag Type: KL 79/A20 Year: 1997 Technical data: Length approx. 10,50 m Width approx. 1,40 m Height approx. 2,10 m Glue thickness up to 20 mm Glue height up to 60 mm Control NC 21 with workpiece support - scissor version with following units: Ddkdrc7 Edge magazin for coils and stripes Edge pre-heating unit IR Glueing unit with pre-melting tank and application roller Pressure zone with 1 driven main pressure roll and 6 additional pressure rolls End tri... more
5

tilting spindle moulder SCM T150

More Scm T 150
Egenhofen / HerrnzellGermany dealership location
6816 km
1991
good (used)
Type: T150 Used Machine Swivel: Yes / -5 to 45 ° 30mm diameter spindle speeds: 4 Height adjustment: electrical tilt adjustment: electrical automatically Yes /: engine brake 9yasfcuoc Motorpower: 6kW Year of construction: 1991 Location: Warehouse / 82281 Herrnzell more
7

4-side moulder Weinig Unimat 500

More Weinig Unimat 500
Tussendiepen 39, 9206 AB DRACHTEN, NLNetherlands
6264 km
2007
excellent (used)
Weinig Unimat 500 6 Spindles - strong 5 KW, with inverter 5-30 m/min Bbwkbxt9dd Weinig Memory System Motors with brakes Infeed table with gliderollers on infeed fence Extra long infeed table 2,5 meter Waxilit pump Without cutterheads Machine in very good condition more
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Bbuvrf7sg3 USED STETSON-ROSS MODEL 6-12-C1 24-KNIFE HIGH SPEED PLANER MATCHER WITH: -- Cartridge Style Double Profiler -- Air Chipbreakers -- Hydraulic Roll Tensioning With Air Cushion On 1st. Top Infeed Roll -- Key Knife Quick Change Reversible Knives On Top And Bottom, 24-Knife (Copy this link to see more about Key cylinders: [...]) -- 8” X 15” Capacity -- Top Head with (2) 65 HP Motors -- Bottom Head, 65 HP -- Left Side, 65 HP -- Ri... more
10

Four-sided Planer Ledinek SUPERLES 300 4V-SL

Neuzeller Str 42, 33449 Langenberg, DEGermany
6464 km
2010
ready for operation (used)
Four-sided Planer LEDINEK SUPERLES 300 4V-SL Typ: SUPERLES 300 4V-SL Machine No.: 3967 Year: 2010 Condition: used, checked cleaned, ready for working Technical data: Working dimensions: Working width: 70 - 300 mm Working thickness: 15 - 90 mm Working length: min. 2,000 mm Table height: 900 mm Feed speed: 40 - 180 m / min drive motors Surfacing spindle: 30 kW Thickness spindle: 37 kW Vertical spindle left: 15 kW Vertical spindle right: 15 kW Feeding: ... more
6
Hot melt unit Pressure zone with 1 driven and 3 non-driven rollers Mwtqeue End trimming unit T/B edge trimming unit radius scrapers Buffing more
3

double-sided high speed press RASTER HR 50 NL-4S

Lager Plettenberg-SieselGermany dealership location
6461 km
1973
used
pressure 50 t stroke -50 mm no. of strokes 49-294 Hub/min throat 170 mm ram - range of adjustment 80 mm ram surface 600x360 mm Ytur9zxip table surface area 830x440 mm hole in the table 450/330x110/85 mm 350 mm total power requirement 12 kW weight of the machine ca. 6,5 t more
6

tilting spindle moulder Lazari Base 45

Egenhofen / HerrnzellGermany dealership location
6816 km
1998
good (used)
Type: BASE45 Used Machine Swivel: Yes / -5 to 45 ° 30mm diameter spindle speeds: 5 Height adjustment: manual tilt adjustment: manual Tgslprqbl Year of construction: 1998 Location: Warehouse / 82281 Herrnzell more
7

4-side moulder Weinig Unimat 500

More Weinig Unimat 500
Tussendiepen 39, 9206 AB DRACHTEN, NLNetherlands
6264 km
2007
excellent (used)
Weinig Unimat 500 6 Spindles - strong 5 KW, with inverter 5-30 m/min Weinig Memory System Motors with brakes Infeed table with gliderollers on infeed fence Bbwkbert2b Extra long infeed table 2,5 meter Waxilit pump Without cutterheads Machine in very good condition more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Ncck7 PINHEIRO MF 4/EF-630 4 Sided Planer with working capacity of 24" x 8". 4-head configuration (B-T-R-L). -- Head sequence: Bottom 15 HP, top 25 HP, left 9 HP, right 9 HP motor. -- Spindles: 1-13/16" Dia. spindles on side heads, all heads belt driven, 5,000 RPM on top & bottom heads and 5,500 RPM on side heads. Tersa 4K heads on Top and bottom. -- Feed: Variable feed speed 20 - 100 FPM, 4 HP feed drive, (6) powered top & bottom feed rolls, serrated/sec... more
3
this machine was part of a wood floor laminating line Bbw8uvlweg and due to change in client requirements was not used for more that two months of its life more
6
Single sided edge bander Edges: 0,4 to 5 mm Coil edges 0,8 to 20 mm. Panel thickness: 8 to 55 mm, motorised setting (programmable) Feed speed 16 m/min Bbhloaz0re Equipment: Coil- and stripmagazine Quickmelt unit Pressure zone with 1 driven and 4 non-driven rollers End trims, pneum. Setting straight/chamfer, 2 x 0,75 kW Chamfer trimming, 2 x 1,5 kW , pneumatic adjustment Radius trimming, 2 x 0,55 kW, pneumatic adjustment Contour trimming, 2 x 0,35 kW Profile scraping with quick exchange tools... more
5
Mtgzn Used Benier breat moulder / baquette moulder Type: BEFLEX Nr: 3.0724 For normal breat and baquette Upper conveyor belt can walk along and against the product. Frequenty controller. Conveyor belt weith is 680 mm. more
4
Type: F45 Second-hand machine Swivel range-5 to + 45 ° Electr. Height and swivel adjustment Spindle diameter 30 mm Speeds: 4 Power consumption: 5 kW Ckcrkkms Year: circa 1970 Location: Camp / 82281 Herrnzell more
1
Elect./Voltage: Glr0kjdwy YATES-AMERICAN A-20 PLANER/MATCHER WITH TOP & BOTTOM PROFILERS -- (6) Head Yates-American A- 20 planer . Planer capacity of 8" x 15”; -- All heads are with V-belt drive components which include the grip-belt sheaves, split taper bushings, grip-belts and belt guards. This unit is equipped with 1-13/16” dia. top & bottom motorized profile spindles. -- Variable speed: 300' to 800 feet per minute -- TOP HEAD, 8" cutting circle, 16-knife, with a cuttin... more
5

double-sided high speed press SCHULER SA 250

Lager Salach, Baden-WürttembergGermany dealership location
6698 km
1978
used
Pressure:250 t stroke:30 mm no. of strokes:60 - 500 /min Distance between columns:1500 mm distance table/ram, max. stroke up, adjustment up:550 mm table surface area:1580 x 1100 mm hole in the table:1270 x 300 mm table height over floor:1470 mm side window:600 mm ram surface:1500 x 900 mm ram adjustment:100 mm material width:500 mm Ibjosox material thickness:0,5 - 1,5 mm coil weight:6,5 t coil internal diameter:420 - 560 mm coil external diameter:1500 mm no. of straightening rolls: straighteni... more
6
Gfwfxpp Edges up to 3 mm from coil, 6 mm strips Workpiece width min: When Workpiece thickness 12-22mm 70 mm* When Workpiece thickness23-40 mm, 120 mm* When Workpiece thicknesse 41-60mm 150 mm* *in relation to workpiece length Feed speed 11 m/min Equipment: Pre-Milling 2 X 2,2 KW Pre-heating of panel edge Glue aggregate A6 Coil edge magazine Pressure zone, central positioning End trims, chamfer 15°/straight, 2 X 0,18 KW, 12.000 rpm, electro-pneumatic setting central control Top & Bottom trimmn... more
4

4 side moulder GUBISCH 140

ab StandortGermany dealership location
6721 km
used
Number of spindles 6 St. Working width 140 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 1 kW ! In order to sell ! ! Machine is still in use and can be visited with pleasure! 9xcsqyqzo Four side planing machine Gubisch type 140 Number of spindles: 6 pcs. Working width: 140 mm Planing height: 120 mm Dressing table length: 2000 mm Feed motor: 1 kW (Technical data according to manufacturer - without guarantee!) more
5

spindle moulder Baeuerle SFM2

Egenhofen / HerrnzellGermany dealership location
6816 km
good (used)
Type: SFM2 second hand machine sliding table spindle diameter 30mm and 40mm speeds: 4 height adjustable: manual Power: 6 kW AutoEngine brake V99lc Year of construction: Location: Warehouse / 82281 Herrnzell more
6
Single sided edge banding machine Make: Homag Type: KL 79/A20/S2-20MM Year: 2000 Technical data: Coil or as strip, up to 20 mm edge thickness, in lenghtwise and crosswise feed. Control NC21 - Feed stepless controllable 18 - 24 m/min - Working height 950 mm - Working width min.: - 55 mm at workpiece thickness 22 mm, 100 mm at workpiece thickness 60 mm (depending on the workpiece length) - Workpiece overhang 30 mm - Workpiece thickness 12 - 60 mm - Edge material strip max. 0,4 - 20 mm - Edge cr... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbu8foprp2 WEINIG UNIMAT 500/017 Moulder Feed Through;5-Head (B-R-L-T-B), working cap. 9-1/16" x 4-3/4". -- Head sequence: Bottom 10 HP, right/left 10 HP, top 15 HP, and bottom 10 HP motor. All motors with mechanical brakes. -- Spindle dia. 1-1/2" with cutterhead speed at 6,000 RPM; electronic digital readouts on all spindles for accurate setup. "Memory Redial" for for quick setup and profile storage of (200) profiles. Electronic readouts for chipbreaker a... more
3

Sintex 4 Sided Prestraightening Planer SCM

Moorgate Point 1, L33 7DR Liverpool, GBUnited Kingdom
5686 km
good (used)
SCM Sintex 4 Sided Prestraightening Planer Bbxiy7k9gg more
3

"Planer/ moulder tools" LEUCO

"Lager D-01665 Klipphausen"Germany dealership location
6821 km
1995
used
"Planer/ moulder tools LEUCO Cutting width mm: 40 Outer diameter mm: 150 Bpro3qcr Profile depth: 13 Hole diameter mm: 35 Profile cutter head: Yes Workpiece feed: mechanical Cutters: Carbide cutters" more


4 sided mo...
every day

New machines via email!

Be informed!

to

to

Change search
4 SIDED MOULDER
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,49 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close