Used Notching for sale (346)

Condition: used, Year of construction: 1987, plate thickness 4 mm blade length 150 mm Fsdpjyv Ntxjfx Alqogb cutting angle 30-120 ° Table dimensions 1000x650 mm

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg Fgsdpfxomck Rye Alqjb good condition

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1340020158, Variable notching possibilities for mullion and transom combinations, e.g. for curtain walls, conservatories, sky lights, and special designs Precise and safe notching is ensured because the workpiece is fixed and only the saw units move Both saw units are adjusted in height simultaneously by means of a hand wheel (analogue display on the hand wheel) The cutting depth is set using an analogue display Manual angle adjustment of the saw blades using a digital display of the tilting angles Support table with compound slide and pivoting back fence is manually adjustable for optimal use of the cutting range The angle of the pivoting back fence is shown on a digital display Horizontal and vertical profile clamping Automatic working cycle at a 90° pivoting angle (two-hand control when cutting special angles) Hydro-pneumatic saw feed Lower saw unit (vertical): Saw blade diameter 550 mm Tilting range from 45° forwards to 60° towards the rear Max. cutting height of 210 mm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW with motor brake Fsdeyfhvpepfx Alqogb Saw blade speed 2,800 rpm Manual tilting angle adjustment with digital display Upper saw unit (horizontal): Saw blade diameter 500 mm Tilting range from 55° downwards up to 60° upwards Notching depth, max. 190 mm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW with motor brake Saw blade speed 2,800 rpm Manual tilting angle adjustment with digital display Travel 830 mm max. Support table with working height of 990 mm: Pivoting range from 30° left to 30° right, home position 0° Pivoting range manual with digital display Compressed air supply 7 bar Air consumption per working cycle 35 l without spraying, 45 l with spraying Length 3,000 mm, depth 1,420 mm, height 1,600 mm, weight 1,250 kg

Year of construction: 2026, condition: new, Universal notching saw; Height 1.100 mm; head +/-180 degrees. Saw stroke 900 mm, blade diameter 500 mm Fgjdped A Huwefx Alqjb

Condition: good (used), functionality: fully functional, Year of construction: 1991, sheet thickness steel (max.): 6 mm, power: 0.004 kW (0.01 HP), overall weight: 1,600 kg, Cutting 6 mm at 400 N/mm² 4 mm at 600 N/mm² Fgedpfx Aley Rf Ubjqjb Stepless angle adjustment 30 - 120° Drive power approx. 4 kW

Condition: used, Year of construction: 1987, plate thickness 3 mm angle adjustable from - to 30 - 120 Grad table height 900 mm weight ca. 800 kg Fgsdpfxoy Ihanj Alqob Cutting capacity: 3 mm St40 at 150 x 150 mm, 2 mm stainless steel; cutting angle continuously adjustable from 30° to 120°; pneumatic clamping for angle adjustment (Boschert system); machine is in good condition

Condition: good (used), Year of construction: 1994, machine/vehicle number: 4422550994025, Offer 26088 Hydraulic Profile and Bar Shear with Notching Device and Punching Unit Technical Data: - Flat Bar Shear - Flat steel: 400 x 16 mm - or: 300 x 18 mm Fgodpfsy Nk Rlox Alqsb - Section Steel Shear - L- and T-iron at 90°: 130 x 12 mm - Square bar / round bar: 40 / 40 mm - Notching Unit - With square notcher for sheet metal up to approx. 13 mm - Notch depth approx.: 70 mm - Notch width approx.: 52 mm - Punching Unit - Punching force approx.: 60 t - Throat depth: 400 mm - Stroke approx.: 10 to 50 mm - Punches steel up to Ø 31 in 15 mm - Electrical contact stop - Various punch dies and matrices - Drive: 400 V / 5.5 kW - Space requirement: W 1100 x H 2000 x D 1700 mm - Weight approx.: 2100 kg

Condition: ready for operation (used), Year of construction: 1982, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 Hub/min angle adjustable from - to 30 - 120 Grad engine output 4.0 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm * Machine with 1x new set of notching knives (!!) * installed in 2026 * approx. acquisition costs 1.000 Euro Equipment: - electro-hydraulic notching machine, with angle adjustment * Angle adjustment via hand wheels - Front control panel - Plexiglas protection for better transparency - Hardened blades also for cutting stainless steel - Planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x cutting stops * with movable and replaceable stop bars - lateral cut material ejection Fjdpfxexaaiie Alqegb - Freely movable foot switch - operating instructions

Condition: used, Year of construction: 2012, gebraucht 2012 9690F prompt, Zwischenverkauf v Fgjdpfx Aloynm Ddeqeb China 690 € 1 100 mm 3 mm 90 ° 90 kg Beidseitig verstellbare Anschläge Fingerschutz Ausrüstung gemäß CE Vorschriften

Condition: excellent (used), functionality: fully functional, tool diameter: 450 mm, rotational speed (min.): 2,800 rpm, rotational speed (max.): 2,800 rpm, overall weight: 400 kg, cutting height (max.): 153 mm, saw blade speed: 2,800 rpm, mount diameter: 40 mm, power: 0.003 kW (0.00 HP), Equipment: rotational speed infinitely variable, GRAULE facade saw type AS 450 transport 350 EUR Fgsdpfxjthdrwo Alqeb

Condition: good (used), Year of construction: 2000, machine/vehicle number: M 100-34 E3-D, Offer 24371 Technical data: - Machine for the production of closed cold-formed corners - Material thicknesses 0.8 to 2.5 mm - max. achievable shelf height see table - min. Workpiece length / min. workpiece width 120 mm - Production time per formed corner, independent of material 10 sec. Fgsdpfxeu Rarts Alqob - Drive 400 V / 4 kW - Control panel with E - foot switch - Space requirement station 1 approx. W 1100 x H 1650 x D 1100 mm - Weight of station 1 approx. 800 kg - Space requirement for station 2 approx. W 800 x H 1400 x D 900 mm - Weight of station 2 approx. 500 kg

Year of construction: 2004, condition: excellent (used), functionality: fully functional, Notching saw for cut-outs and bevel notching. The machine is equipped with two saw blades, each with a diameter of 500 mm. It features a pneumatic clamping device. The feed is hydropneumatic and is triggered via two-hand control. The material stop is swiveling, with locking points and a digital display. Notching height and angle are motorized and digitally indicated. Max. profile height: 280 mm Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Fgjdpfxjyzcpds Alqob

Condition: good (used), Year of construction: 2012, machine/vehicle number: 753, Offer 26125 Technical Data: - Cutting length up to 150 mm - Cutting thickness – at 400 N/mm² strength: 4 mm – at 700 N/mm² strength: 3 mm - Cutting angle steplessly adjustable: 30° – 120° - Pneumatic clamping of the cutting angle adjustment - Stroke: 22 mm - Strokes per minute: 60 - Table surface with T-slots and depth stops - Table height: 900 mm - Drive: 400 V / 3 kW - Electric foot pedal - Space requirement approx.: W 1000 x H 1150 x D 1400 mm Fgjdjy Dqmvspfx Alqeb - Weight approx.: 850 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 0156084906226, Offer 23145 Hydraulic Flat, Profile, and Bar Steel Shear with Notching Device and Punching Unit Technical Specifications: - Flat Bar Shear - Blade length: 420 mm - For flat material: 400 x 15 mm - Profile Steel Shear - No blades installed - Angle steel at 90°: 110 x 10 mm - at 45°: 65 x 8 mm - T-steel at 90°: 90 x 10 mm - Bar Steel Shear - No blades installed - Round steel / Square steel: 35 / 32 mm - Notching device - For material up to 12 mm - Triangular notching: T 60 mm - Punching unit - Punching force: approx. 500 kN - Stroke, infinitely adjustable: 0 - 40 mm - Punches steel up to 30 mm Ø in 15 mm - Throat depth: 410 mm - Hydraulic drive: 400 V / 7.5 kW - Space required: approx. W 1400 x H 1800 x D 700 mm - Weight: approx. 1800 kg Fsdpfx Alsy Ddv Rsqsgb - Includes: various punches and dies, support/stop table, triangular notching unit, 2 foot pedal switches

Condition: used, Year of construction: 1986, plate thickness 6,0 mm pressure 18 t cutting angle - upper blade 90 ° blade length 225 x 225 mm voltage 380 V total power requirement 5,5 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1,10 x 0,80 x 1,05 m Fgedsg Ip Efspfx Alqjb - Angular stops adjustable

Year of construction: 2026, condition: new, New notching sawing machine LGF ALFA 55 with Ø 500 mm and Ø 550 mm sawblades. Machine in stock Specification: - Machine totally enclosed - Cylinder stroke 825 mm Fjdpfod Nh S Njx Alqsgb - Adjustable feeding of the sawing carriage 4-10 mt/min - Both saw blades tilting range +/- 45° by means of hand wheel - Possibility to perform cuts at any intermediate degrees - Adjustable working bench in terms of height and depth by means of hand wheels - Tilting fence on the working bench at 60°/90°/-60° - Maximum profile height 215 mm - Maximum profile width 250 mm - Maximim depth of horizontal cut 190 mm - Maximum depth of vertical cut 200 mm - Three phase self-braking motors 2,2 KW (3 HP) - 2800 rpm - Saw blade shaft Ø 30 mm - Working pressure 7 bar Equipment: - Nr. 1 Digital Display on tilting fence - Nr. 2 Digital Display on saw blade tilting - Nr. 1 Digital Display on fence for profile tilting - Nr. 1 Analogical counter on working surface height - Nr. 1 Vertical TCT saw blade Ø 550 mm - Nr. 1 Horizontal TCT saw blade Ø 500 mm - Pneumatic clamps - Automatic lubrication by means of nebulizer - Waste retrieval front tank on wheels - Nr. 2 waste retrieval tanks on the sides - Air filter - Service spanners

Condition: good (used), Year of construction: 1990, blade length 200 x 200 mm max. sheet thickness: Normal steel 4 mm VA 3 mm variable notching angle 30 - 135 drive power 4 kW dimensions L x W x H 1700 x 1000 x 1500 mm Weight 940 kg Accessories / special features: - Cutting depth limitation via potentiometer with digital display - Variable angle of deflection 30 - 135°. - Clean cuts, even beyond the blade length without any start-up - Hydraulic clamping of the knives for angle adjustment - Large work table with scale and T-slots - Electric foot switch incl. 1 set of new upper knives 30 - 135°, newly mounted and adjusted Siegfried Volz Machine Tools Fedsdut Skspfx Alqsgb Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 4 mm, cutting length (max.): 225 mm, Boschert Notching Machine Type LB14 Station 1 Fedpfx Aewfymnelqogb Fixed angle 90° Cutting length 225x225 mm Adjustable cutting length Cutting capacity 4 mm St40/ 3 mm V2A Station 2 Indentation cutting 100x25 mm Adjustable cutting length Used machine in very good condition Refurbished Built in 2000

Condition: used, Year of construction: 1991, pressure 4 t throat 200 mm stroke 9,5 mm no. of strokes 280 - 1400 /min distance table/ram, max. stroke up, adjustment up 215 mm table surface area 320 x 160 mm Table height above floor 940 mm ram surface 140 x 75 mm ram adjustment 20 mm diameter of blanks - 600 mm no. of flutes 6 - 120 material thickness 1,0 mm distance between mid parts spindle and mid ram 15 - 250 mm Fgodpfjyx Ikbex Alqeb power requirement 3,0 kW Weight 4,30 kg dimensions of the machine (WxDxH) 1,2 x 2,2 x 2,0 m with infinitely variable drive (Stöber), pneumatic clutch-brake combination (Ortlinghaus), manual ram adjustment, pneumatic clamping of the blanks, automatic stripping device, manually adjustable table plate, manual adjustment of the punching radius, fully automated centralized oil lubrication, noise cancelling cabinet

Year of construction: 2006, condition: good (used), for processing aluminium and PVC profiles in facade and structural construction Mitres in 3 planes, also suitable for use as a compound crosscut saw Processing of profiles up to 300 mm width at 90°, sharp mitres up to 30° Notching depths horizontally up to 185 mm and vertically up to 230 mm at 90° Notching width at 90°: 300 mm, profile height up to 280 mm Fsdpeyz T A Uefx Alqjgb Motorised height adjustment for notching, positioning with electronic digital display Saw blade swivel range vertical 60° - 90° - 25° (front/centre/rear), motorised positioning with electronic digital display Saw blade swivel range horizontal with vertical blade 45° - 90° - 45°, motorised positioning with electronic digital display

Year of construction: 1995, condition: good (used), machine/vehicle number: 8883, Offer 26051 Technical Specifications: - Feed of the milling unit manual - Worktable height adjustable via handwheel - Horizontal and vertical material clamping - Cutter diameter up to 300 mm - Max. milling height 150 mm - Max. milling depth 110 mm - Max. milling length 500 mm - Angle-adjustable stop left & right 20° - 90° - Spindle speed 2800 rpm - Drive 400 V 2.2 kW Fgedpfx Alsyz S Trjqob - Compressed air connection 6 - 8 bar - Air consumption per cycle 10 l - Pneumatic profile clamping - Spray device - Space requirement approx. W 1300 x H 1450 x D 1100 mm - Weight approx. 300 kg

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 17100 € 328.32 € 200 mm 4 - 6 mm 2 - 3 mm 30 1/min 30 - 140 ° 4 kW 900 mm 1150 mm 1240 mm 1150 kg Hydraulic drive Variable cutting angle 30 - 140° Max. thickness (420 N/mm²) : 6 mm (at 60°), 4 mm (at 140°) Max. thickness (600 N/mm²) : 3 mm (at 60°), 3 mm (at 140°) Automatic adjustment of blade gap 4 downholder 2 gauges angle adjustable Fodpfx Aljwiq Tgjqegb Protection cover, acrylic glass Foot pedal Waste box According to "CE" regulations User manual in English or German

Condition: good (used), functionality: fully functional, Year of construction: 1995, Used Boschert notching machine Type: LB 12 K 4 Capacity: 120 x 120 x 4 mm Fgodpfoywvwyox Alqjb Fixed angle: 90 degrees Year of manufacture: 1995

Condition: good (used), functionality: fully functional, Station 1: Angle adjustment from 30° - 120° Cutting length 150 mm Station 2: Notching 100 x 20 mm Fgodpfx Aljyzca Njqeb

Condition: good (used), Gebruikte inkepingmachine van Euromac Fodpfx Ajywg S Islqjgb Type: 250 4 s Capaciteit: 250 x 250 x 4 mm