Used Nt 551 for sale (8,331)

Condition: new, empty load weight: 927 kg, maximum load weight: 2,573 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,600 mm, loading space width: 1,700 mm, loading space height: 960 mm, loading space volume: 6.1 m³, color: silver, construction height: 2,100 mm, working width: 2,300 mm, Automatic reverse drive, hot-dip galvanizing, grid attachment / heavy-duty ramp / extremely robust body / multifunctional use / LED lighting / e-wheel, * IMMEDIATELY AVAILABLE * incl. Grid attachment / Heavy-duty ramp / Extremely robust body / Multifunctional use / LED lighting / E-wheel TECHNICAL DATA - Make: Brian James - Model: General Plant - Vehicle type: Construction machinery - Vehicle condition: New vehicle - First registration: Without first registration - TÜV/HU: 2 years from first registration - Internal dimensions (LxWxH): 360 x 170 x 96 cm - External dimensions (LxWxH): 529 x 230 x 210 cm - Loading height of floor: 48 cm - Perm. Total weight: 3,500 kg - Unladen weight: 927 kg - Payload: 2.573 kg - Chassis: Low loader (wheels next to the body) - Tyres: 185/70R13C - Chassis: ALKO rubber suspension axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Universal all-rounder construction machinery trailer - Unique on the market - Every available option can be flexibly attached or removed and thus enables customization for almost any area of application - Insertion option at all 4 corners for drop sides, tarpaulin frames, side wall extensions or front wall extension - Steel side wall extension - 50% lattice extension + 50% closed side wall, can be removed without tools - Incl. recessed eccentric locks - hard-wearing rubber strip seals the attachment to the dropside at the bottom - vehicle also intended for all options after purchase: enormous potential for retrofitting: hydraulic tipping functions, winches, other ramps, attachments, etc. can be retrofitted at any time - robust steel mudguards with non-slip perforated profile - reinforced 18 mm screen-printed wooden floor, non-slip and waterproof - very sturdy welded steel frame - frame completely hot-dip galvanized - chassis with additional longitudinal beam underneath the loading area - sturdy, sturdy chassis with additional longitudinal beam underneath the loading area - sturdy chassis with additional longitudinal beam underneath the loading area - sturdy chassis with additional longitudinal beam underneath the loading area - sturdy chassis with additional longitudinal beam underneath the loading area.stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber buffer dampens noise - heavy-duty perforated steel ramp, galvanized steel, with spring support (heavy-duty) - very low chassis for low drive-on angle - lashing points at the bottom and top of the dropside (1000dAN/kg) TÜV certified - side panels color: black - maintenance-free axles and damping systems designed for long journeys and heavy loads - spare wheel mounted on the dropside for easy access - automatic reverse - ALKO overrun device and parking brake - cast steel coupling head with integrated ALKO high-security lock - very sturdy V-drawbar REINFORCED - 13-pin plug - complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Automatic heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - Excavator bucket support - Tipping hydraulics - Lashing straps - Storage box - Winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trai Nedpfsu Hrl Djx Ad Sjlc

Condition: new, empty load weight: 828 kg, maximum load weight: 2,672 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,600 mm, loading space width: 1,700 mm, loading space height: 300 mm, loading space volume: 1.8 m³, color: silver, construction height: 2,100 mm, working width: 2,300 mm, Automatic reverse drive, hot-dip galvanizing, heavy-duty ramp / extremely robust body / multifunctional use / LED lighting / e-wheel, * IMMEDIATELY AVAILABLE * incl. Heavy-duty ramp / extremely robust body / multifunctional / LED lighting / e-wheel TECHNICAL DATA - Make: Brian James - Model: General Plant - Vehicle type: Construction machinery - Vehicle condition: New vehicle - First registration: without first registration - TÜV/HU: 2 years from first registration - Internal dimensions (L x W x H): 360 x 170 x 30 cm - External dimensions (L x W x H): 529 x 230 x 210 cm - Loading height of the floor: 48 cm - Perm. Gross vehicle weight: 3,500 kg - Unladen weight: 828 kg - Payload: 2.672 kg - Chassis: Low loader (wheels next to the body) - Tyres: 185/70R13C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Universal all-rounder construction machinery trailer - Unique on the market - Every available option can be flexibly attached or removed and thus enables needs-based adaptation for almost any area of application - Insertion option at all 4 corners for drop sides, tarpaulin frames, drop side attachments or front wall elevation - Vehicle also intended for all options after purchase: enormous potential for retrofitting: hydraulic tipping functions, winches, other ramps, attachments, etc. can be retrofitted at any time. can be retrofitted at any time - robust steel mudguards with non-slip perforated profile - reinforced 18 mm screen-printed wooden floor, non-slip and waterproof - very sturdy welded steel frame - frame completely hot-dip galvanized - chassis with additional longitudinal beam under the loading area - sturdy chassis with additional longitudinal beam under the loading area - sturdy chassis with additional longitudinal beam under the loading areastable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber buffer dampens noise - heavy-duty perforated steel ramp, galvanized steel, with spring support (heavy-duty) - very low chassis for low drive-on angle - lashing points at the bottom and top of the dropside (1000dAN/kg) TÜV certified - side panels color: black - maintenance-free axles and damping systems designed for long journeys and heavy loads - spare wheel mounted on the dropside for easy access - automatic reverse drive - ALKO overrun device and parking brake - cast steel coupling head with integrated ALKO high-security lock - very sturdy V-drawbar REINFORCED - 13-pin plug - complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Automatic heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - Excavator bucket support - Tipping hydraulics - Side wall attachments - Lashing straps - Storage box - Winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors Nedpfx Aju Ht N Red Solc

Condition: good (used), EBA 551-06 Paper Cutting Machine The machine is in very good condition. A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, bookbinding shops, and digital printers. Equipped with programmable controls, it is designed for low-volume, frequently changing orders. Control: Program storage capability Data entry via a decimal keypad Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Machine diagnostics with on-screen error indicator Program start with the „start” button MM/INCH switching Hydraulic knife and pressure beam drive Photocells Cutting line Side tables Foot pedal for pressure adjustment Njdpfx Adozdayqe Sjlc Safety guards on the rear table Technical data: Cutting length: 550 mm Infeed depth: 570 mm Stack height: 95 mm Front table depth: 460 mm Minimum final offcut: 32 mm Power supply: 230 V / 50 Hz Power: 1.5 kW Weight: 350 kg The set includes: spare knife, cutting stick, operating tools, instructions.

Condition: ready for operation (used), Heidenhain 324 955-15 interface board SN: 14 037 753, the item has been completely overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nlodpfx Ajx Eruwed Ssc

Condition: ready for operation (used), Heidenhain ID 324 955-17 interface board, serial number: 32482946. The item has been overhauled and comes with a 3-month warranty, used, in good condition, 100% functional. Delivery as shown in the photos. Nljdpfx Adjx Ervbe Ssc

Condition: ready for operation (used), Heidenhain interface board Id. 324 955-17 SN24114846, the item has been fully refurbished and comes with a 3-month warranty, used, in good condition, 100% functional, scope of delivery as per photos. Nlsdpfx Ajx Ery Tod Sec

Condition: ready for operation (used), Heidenhain 324 955-14 interface board SN: 11 390 618, the item has been overhauled and comes with a 3-month warranty, used, in good condition, 100% fully functional, scope of delivery as shown in the photos Nedpfxsx Erude Ad Sslc

Condition: ready for operation (used), Heidenhain 324 955-14 interface board SN: 12 476 309 A, the item has been completely overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, delivery as shown in the photos. Njdox Erukopfx Ad Sslc

Condition: ready for operation (used), Heidenhain 324 955-17 interface board SN: 71 401 350 B, the item has been completely overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, delivery as per photos. Nljdpfjx Ervuox Ad Ssc

Condition: new, Indramat DDS02.2-W050-B controller SN:263406-04551, unused, 100% functional, delivery as shown in photos Nlsdpfex Etwtjx Ad Ssc

Condition: used, mileage: 177,310 km, power: 129 kW (175.39 HP), first registration: 02/2017, fuel type: diesel, overall weight: 7,490 kg, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,400 mm, loading space width: 2,300 mm, Equipment: ABS, air conditioning, central locking, crane, Mitsubishi Fuso Canter 7C18 from 12/2016 with a Meiller three-way tipper and a Hiab 055 DS-3 hydraulic crane at the rear, also from 2016. The crane has a 5/6 control circuit for a grapple (which can be purchased separately), as well as a remote control. The truck has 3 seats, air conditioning, and 2 tow hitches with a ball head (3500 kg). The vehicle is from a single owner and has only 177,000 km. * Crane Hiab 055 DS-3 behind the cab * Working height 12.20 m * Lateral outreach: * 2.10 m – 2,260 kg * 3.80 m – 1,360 kg * 5.10 m – 920 kg * 7.00 m – 660 kg * 9.00 m – 520 kg * 2x hydraulic outriggers * 5/6 control circuit for grapple * Remote control * Floor control * Air conditioning * 3 seats * Power steering * Central locking * Tow hitch ball head 3500 kg * Tow hitch pintle hitch 3,500 kg * Cab rear wall with window * Manual transmission * Electric windows * Leaf spring suspension * Meiller 3-way tipper * Length: 3,400 mm, Width: 2,300 mm * Unladen weight 5,270 kg Nlsdoy Hzxbspfx Ad Sec * Gross vehicle weight 7,500 kg * Payload 2,220 kg * Optionally available for an extra charge with a two-shell grapple (50 cm) We expressly reserve the right to sell the item in the meantime, as we also offer this item on other platforms. Information on accessories is provided without guarantee. Subject to change, prior sale, and errors. We strongly recommend and encourage an inspection and evaluation so that the buyer does not have any false expectations regarding the condition and suitability. Inspections and evaluations are possible and expressly desired at any time by appointment.

Condition: used, mileage: 74,053 km, power: 375 kW (509.86 HP), first registration: 11/2015, overall weight: 35,000 kg, fuel type: diesel, color: white, axle configuration: 8x2, maximum load weight: 11,625 kg, empty load weight: 23,375 kg, tire size: 385/55/315/70 R 22,5, next inspection (TÜV): 11/2026, wheelbase: 4,500 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 16 m³, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, low noise, power assisted steering, seat heater, Vehicle location: Bovenden, with house, 1 comfort seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, Telligent gearshift, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, lift and lower function, differential lock, work lights, rotating beacon, storage compartment, leaf-air suspension, connections for air and light for trailer hitch, last axle hydraulically steered, sunroof, remote control, green environmental badge. Nlsdpfx Adjzbvdaj Ssc Wheelbase: 4500 mm, Body: Wiedemann Super 2000 body, Capacity (sludge), 6,000 l (service water), 16,000 l (total), with water recovery, radio remote control 9t/7.5 tons front axles, disc brakes on front and rear axles, vacuum pump type: KW 4000, renewed in 2023 (1801), Aerokill system, hydraulic winch (350 kg) & rescue eye, meter counter for hose lengths, reversing camera, access ladder, filterless water treatment (sedimentation/centrifugal principle), stainless steel water tank (V2A, multi-chamber system) and an integrated fresh water system (approx. 800 - 1,000 l), high-pressure pump: Uraca P4-45-70, (1.025), large HD hose reel: approx. 180 m high-pressure hose DN38, a small HD hose reel: approx. 70 m high-pressure hose DN13, and a DUO coupling for power reduction, external transfer pump (rotary lobe pump Jurop VL14) for work with large water volumes. Pump output: 1,400 l/min, 2 bar, 7 kW, wardrobe with heater, hand washing basin (hot/cold). ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, mileage: 750 km, power: 375 kW (509.86 HP), first registration: 06/2026, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: grey, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), * New vehicle, not registered * Eligible for registration until 12/2029 * Special equipment: * Clutch-dependent but gearbox-independent auxiliary drive MB 1.65, drive flange D=150 mm * and gearbox-dependent auxiliary drive MB 131-2C * Pump mounted below the upper edge of the frame * Gearbox lock NMV * Twin-plate clutch * Drivetrain 44-120 t * Gearbox oil cooler * Transfer gearbox VG2800-3W/1.45-1.04, permanent * Power Shift 3, Advanced transmission * Driving program: Offroad * Rear view camera * Lane keeping assist * Attention assist * Traffic sign assist * Active Brake Assist 6 * Active Sidegard Assist 2 * Frontgard Assist * ATS warranty according to general terms and conditions, 4 years, 340,000 km * Wheelbase 4850 mm * Frame overhang 2500 mm * Axle load, front axle: 9.0 t * Exhaust muffler, vertical, behind the cab * Battery 220 Ah (AGM), batteries arranged side by side * Air tank, aluminum * Electrical pre-wiring in the cab, 24V / 100 A * Suspension: Front springs 9.0 t, 4 leaves * Windshield, tinted with band filter * Vehicle without underrun protection at the rear * Speed limiter * Gearbox: 16-speed, type: G 280-16 * Gearbox lock, gearbox-independent * Rear axle, ring gear 300, 16.0 t * Interior filter for construction site vehicles * Fuel tank: 330 L, aluminum, right side * Cooling capacity for hot climates * Air filter: Cyclonic air filter * Engine brake, reinforced * High Performance Engine Brake * Auxiliary drive - smooth flange * Auxiliary drive, gearbox-independent and clutch-dependent MB 1.65 * Parameterizable special module * Frame overhang 2500 mm * Smoker's package * Rain sensor * Tire pressure monitoring system * Reversing warning: acoustic and warning flashing lights (external warning signal) * Key with remote control, additional (2) * Interface for fleet management system * Headlight protection grid Nsdpjzch Nqsfx Ad Selc * Sun visor, exterior * Stabilizer on 2nd rear axle, reinforced * Steel rims 11.75x22.5 (on front axle) * Additional 24V socket in the co-driver's footwell * Preparation for work spotlights on the upper rear wall of the cab * Preparation for additional headlights * Seat belt warning device * Twin-plate clutch * Additional features: Emission standard EURO 6e * ABS, can be deactivated * Axle configuration: 8x8/4, permanent all-wheel drive * Front mirrors, heated * Trailer coupling: Ringfeder hitch * Arocs 5 * Exhaust system, two-part, straight exhaust pipe, above 2nd axle * Braking system, electronic (EPB) with ABS * Cockpit, multimedia * Differential lock, front axle * Compressed air connection in the cab * Compressed air unit with condensate monitoring * Automatic switch-on for driving lights (light sensor) * Cab: Cab access, movable * Cab: Tilting mechanism, hydraulic * Cab: M Low Roof, 2.30 m, tunnel 320 mm * Cab: spring-mounted, standard * Suspension: Leaf spring / Leaf spring * Suspension: Rear springs 2x15.0 t * Power windows * Urea tank (AdBlue): 25 L * Manually operated sunroof (steel) * Body/Superstructure: Chassis for dump truck * Comfort locking system * Steering pump, unregulated * Multifunction steering wheel * Steering oil cooler * Air intake behind the cab * Air compressor, 2-cylinder * Air dryer, heated * Engine: 12.8 L, 375 kW, R6 diesel (OM 471) * Engine variant: OM 471 * Auxiliary drive MB 131-2c * Type of use: Local distribution * Wheelbase variant: 4850 mm * Ramp mirrors * Waste heat recovery * Key with remote control (2) * Protection plate

Condition: used, mileage: 750 km, power: 375 kW (509.86 HP), first registration: 06/2026, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: grey, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), * New vehicle, not registered * Eligible for registration until 12/2029 * Special equipment: Nledpfjzch Nkjx Ad Ssc * Clutch-dependent but transmission-independent NMV MB 1.65 drive flange D=150 mm * and transmission-dependent auxiliary drive MB 131-2C * Pump mounted below the upper edge of the frame * NMV transmission lock * Twin-plate clutch * Drivetrain 44-120 t * Transmission oil cooler * Transfer case VG2800-3W/1.45-1.04 permanent * Power Shift 3, Advanced transmission * Offroad driving program * Rear view camera * Lane keeping assist * Attention assist * Traffic sign recognition * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * ATS warranty according to general terms and conditions, 4 years/340,000 km * Wheelbase 4850 mm * Frame overhang 2500 mm * Front axle load 9.0 t * Exhaust muffler mounted vertically behind the cab * Battery 220 Ah (AGM), batteries arranged side by side * Compressed air tank, aluminum * Electrical pre-wiring in the cab 24V / 100 A * Suspension: Front springs 9.0 t, 4 leaves * Windshield tinted with band filter * Vehicle without rear underrun protection * Speed limiter * Transmission: 16-speed - Type: G 280-16 * Transmission lock, transmission-independent * Rear axle, bevel gear 300, 16.0 t * Interior filter for construction site vehicles * Fuel tank: 330 liters, aluminum, right * Cooling capacity for hot climates * Air filter: Cyclone air filter * Engine brake, reinforced * High Performance Engine Brake * Auxiliary drive - smooth flange * Auxiliary drive, transmission-independent and clutch-dependent, MB 1.65 * Parameterizable special module * Frame overhang 2500 mm * Smoker's package * Rain sensor * Tire pressure monitoring system * Reversing warning: acoustic and hazard warning lights (warning signal on the outside) * Additional key with remote control (2) * Fleet management system interface * Headlight protection grille * External sun visor * Stabilizer on 2nd rear axle, reinforced * Steel rims 11.75x22.5 (on front axle) * Additional 24V socket in the passenger footwell * Preparation for work lights on the upper rear wall of the cab * Preparation for auxiliary headlights * Seat belt warning device * Twin-plate clutch * Additional equipment: Emission standard EURO 6e * ABS can be deactivated * Axle configuration: 8x8/4, permanent all-wheel drive * Front/approach mirrors, heated * Trailer coupling: Ringfeder towing coupling * Arocs 5 * Exhaust system, two-part, straight exhaust pipe, above 2nd axle * Electronic braking system (EPB) with ABS * Cockpit multimedia * Front axle differential lock * Compressed air connection in the cab * Compressed air unit with condensate monitoring * Automatic switching for headlights (light sensor) * Cab: Movable cab step * Cab: Hydraulic tilting mechanism * Cab: M Low Roof, 2.30 m, tunnel 320 mm * Cab: steel-sprung, standard * Suspension: Leaf / Leaf * Suspension: Rear springs 2x15.0 t * Electric window lifts * Urea tank (AdBlue): 25 liters * Manually operated lift roof (steel) * Body/structure: Chassis for dump truck * Comfort locking system * Steering pump, unregulated * Multifunction steering wheel * Steering oil cooler * Air intake behind the cab * Air compressor, 2-cylinder * Heated air dryer * Engine 12.8 L - 375 kW R6 Diesel (OM 471) * Engine variant OM 471 * Auxiliary drive MB 131-2c * Intended use: Local transport * Wheelbase variant 4850 mm * Ramp mirrors * Waste heat recovery * Key with remote control (2) * Protection plate

Condition: used, mileage: 750 km, power: 375 kW (509.86 HP), first registration: 06/2026, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: grey, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), * New vehicle, not yet registered * Eligible for registration until 12/2029 * Special equipment: * Clutch-dependent but gearbox-independent NMV MB 1.65 drive flange D=150 mm * and gearbox-dependent auxiliary drive MB 131-2C * Pump mounted below the upper edge of the frame * Gearbox lock NMV * Two-disc clutch * Powertrain for 44-120 tons * Gearbox oil cooler * Transfer gearbox VG2800-3W/1.45-1.04 permanent * Power Shift 3, Advanced transmission * Offroad driving program * Rear view camera * Lane keeping assistant * Attention assist * Traffic sign assistant * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * ATS warranty according to general terms and conditions, 4 years, 340,000 km * Wheelbase 4850 mm * Frame overhang 2500 mm * Front axle load 9.0 t * Exhaust muffler, vertical, behind the cab * Battery 220 Ah (AGM), batteries arranged side by side * Air pressure tank, aluminum * Electrical pre-installation in the cab 24V / 100 A * Suspension: front springs 9.0 t, 4 leaves * Windshield tinted with band filter * Vehicle without underrun protection at the rear * Speed limiter system * Gearbox, 16-speed - type: G 280-16 * Gearbox lock, gearbox-independent * Rear axle, bevel gear 300, 16.0 t * Interior filter for construction vehicles * Fuel tank: 330 liters, aluminum, right side * Cooling capacity for hot climates * Air filter: cyclone air filter * Engine brake, reinforced * High Performance Engine Brake * Auxiliary drive - smooth flange * Auxiliary drive, gearbox-independent and clutch-dependent MB 1.65 * Parametric special module * Frame overhang 2500 mm * Smoker's package * Rain sensor * Tire pressure control system * Rear warning device, acoustic and hazard warning lights (external warning signal) * Additional key with remote control (2) * Fleet management system interface * Headlight grille Nljdpfx Aszch Ndod Soc * Sun visor, external * Stabilizer on 2nd rear axle, reinforced * Steel rims 11.75x22.5 (on front axle) * Additional 24V socket in the co-driver's footwell * Preparation for work lights on the upper rear wall of the cab * Preparation for additional headlights * Seat belt warning device * Two-disc clutch * Additional equipment: Emission standard EURO 6e * ABS switchable * Axle configuration: 8x8/4, permanent all-wheel drive * Front/approach mirrors, heated * Trailer coupling: Ringfeder drawbar coupling * Arocs 5 * Exhaust system, two-part, straight exhaust pipe, above the 2nd axle * Braking system, electronic (EPB) with ABS * Cockpit, multimedia * Front axle differential lock * Air pressure connection in the cab * Air dryer with condensate monitoring * Automatic activation for headlights (light sensor) * Cab: movable cab entry step * Cab: hydraulic tilting device * Cab: M Low Roof, 2.30 m, tunnel 320 mm * Cab: spring-mounted, standard * Suspension: leaf / leaf * Suspension: rear springs 2x15.0 t * Power windows * Urea tank (AdBlue): 25 liters * Manual lift roof (steel) * Body/superstructure: chassis for dump truck * Comfort locking system * Steering pump, uncompensated * Multifunction steering wheel * Steering oil cooler * Air intake behind the cab * Air compressor, 2-cylinder * Heated air dryer * Engine 12.8 L - 375 kW R6 Diesel (OM 471) * Engine variant OM 471 * Auxiliary drive MB 131-2c * Intended use: local transport * Wheelbase variant 4850 mm * Ramp mirrors * Waste heat recovery * Key with remote control (2) * Protection plate

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, overall weight: 980 kg, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, Coordinate measuring machine Coord3 ARES NT 7.7.5 Year of manufacture: 2014 Motorized indexable head Renishaw PH10M hand controller: Renishaw MCU LITE-2 MPEe accuracy: 2.5 µm + L/300 Njdpfx Adsu E U Hbj Sslc Repetition accuracy: from 2.3 µm Measuring range: 700 x 700 x 500 (mm) Granite bed size: 1330x963.5x170mm Software: TouchDMIS 5.2 + dongle The Z-axis support column is made of silicon carbide, which increases rigidity. DC servo motors, air bearings on all axes, free-floating linear scales with 0.1 µm resolution.

Condition: used, mileage: 612,000 km, power: 375 kW (509.86 HP), first registration: 05/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2026, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), MERCEDES-BENZ ANTOS 2651 6X2 CHASSIS, ALCOA RIMS? STEERING/LIFT AXLE? RETARDER? LEATHER? FROM FIRST OWNER? ----VEHICLE HISTORY ? GERMAN VEHICLE ? FROM FIRST OWNER ? VIDEO AVAILABLE UPON REQUEST ? 612,000 KM ? IMMEDIATELY READY FOR OPERATION VEHICLE EQUIPMENT ? CHASSIS ? 6X2 DRIVE ? STEERING AXLE ? LIFT AXLE ? MERCEDES POWERSHIFT AUTOMATIC TRANSMISSION ? CRUISE CONTROL ? AIR CONDITIONING ? ACTIVE BRAKE SYSTEM ? LANE KEEPING ASSISTANT ? DIFFERENTIAL LOCK ? COMFORT SUSPENSION SEAT ? LEATHER SEAT, DRIVER'S SIDE ? SEAT HEATING ? REFRIGERATOR ? ALUMINUM RIMS ? FULL AIR SUSPENSION ? M CAB ? ELECTRIC WINDOWS ? BLUETOOTH RADIO ? HANDS-FREE SYSTEM ? CONSTRUCTION SITE FILTER ? TOOL BOX ? CB RADIO PREPARATION ? TRAILER COUPLING ? RINGFEDER TRAILER COUPLING ? 15-PIN TRAILER SOCKET ? ABS / ASR ? DISC BRAKES ? TELLIGENT BRAKING SYSTEM ? REAR UNDERRUN PROTECTION ? 1 X STEEL TANK, 300 L ? ADBLUE TANK, 35 L AXLES / SUSPENSION ? FRONT AXLE, 7.5 T ? REAR AXLE, 13 T ? FRONT AXLE, LEAF SPRING SUSPENSION ? REAR AXLE, AIR SUSPENSION ? STEERING LS 6 / LS 8 FURTHER INFORMATION ? PERMISSIBLE TOTAL WEIGHT: 26,000 KG ? WHEELBASE: 4.60 M ? TIRE SIZE, FRONT: 385/65 R22.5 ? TIRE SIZE, REAR: 315/80 R22.5 ? TIRES IN GOOD CONDITION ? VEHICLE IMMEDIATELY AVAILABLE ? VEHICLE IMMEDIATELY READY FOR OPERATION SPECIAL AGREEMENT ? WHEEL BEARING, 3RD AXLE, FIXED ? UNLADEN WEIGHT: 15,010 KG ? PAYLOAD: 8,990 KG ----EXPORT / NOTE Nlsdoy Tgaqepfx Ad Sjc EXPORT SALES ONLY WITH DEPOSIT MIN. 500 € - 2,000 € EXPORT SALES ONLY WITH DEPOSIT MIN. 500 € - 2,000 € EXPORT REGISTRATION EXW POSSIBLE WITHIN 10 MINUTES (APPROVED EXPORTER). VEHICLE RESERVATIONS ONLY ACCEPTED IN WRITING. VERBAL AGREEMENTS ARE NON-BINDING. CHANGES, ERRORS AND PRIOR SALE EXCLUDED. LEGAL INFORMATION THIS ADVERTISEMENT DOES NOT CONSTITUTE A BINDING OFFER IN THE SENSE OF SECTION 145 OF THE GERMAN CIVIL CODE (BGB). IT SERVES SOLELY AS THE BASIS FOR CONTRACTUAL NEGOTIATIONS. ALL INFORMATION IS PROVIDED WITHOUT WARRANTY. NO GUARANTEED CHARACTERISTICS. SALE IS EXCLUSIVELY SUBJECT TO OUR TERMS AND CONDITIONS.

Condition: used, Collet holder, tool holder, tool holder, milling holder, milling tool, cutter head holder, milling arbor, power chuck Nljdpfxjgmf Dds Ad Sec -Manufacturer: NT Tool, high-performance power chuck in original packaging -Type: SK40-CT20S-105 -Clamping Ø: 20 mm -Number: 2 pieces -Price: per piece -Dimension box: 240/100/H125 mm -Weight: 2 kg/piece

Condition: used, Clamping head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, adapter sleeves -Manufacturer: NT, adapter sleeves 17 pieces Njdpfxsgl Rx Ro Ad Solc -Sizes: Ø 3-16 mm, see photos -Sale: only for sale as a whole -Dimension total: 70/135/H60 mm -Weight: 0.7 kg

Condition: like new (used), Year of construction: 2001, Set of clamping cones SK 50 - like new. Hardly used. Njdpfx Ajxnldzjd Sjlc

Condition: new, Year of construction: 2026, max. workpiece length 3.800 mm profile spindle 1 Stück main drive 15 kW Control Maestro active windoor Njdpfxoy T R S Ro Ad Sjlc

Condition: good (used), mileage: 282,996 km, power: 309 kW (420.12 HP), first registration: 03/2018, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 3,950 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,850 mm, total width: 2,550 mm, total height: 3,520 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, cruise control, electric window regulation, power mirror, seat heater, traction control, trailer coupling, = Additional options and accessories = - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Halogen lamp - Short cab - Manual - PTO (power take-off) - Pump - Radio/cassette - Reversing camera - Lane keeping assistant - Fabric - Central lubrication = Remarks = Number of axles: 3, Configuration: 6x2, Unladen weight: 12,245 kg, Gross weight: 28,000 kg, Total tank capacity: 250 liters, Trailer coupler, Kingpin diameter: 40 DIN, Fifth wheel: Fixed, Number of differential locks: 1, Central lubrication, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Colour: Multicolour, Heated mirrors, Reversing camera, Lighting: halogen lamp, Lane keeping assistant, Climate control, Seat heating, Bluetooth, Engine output: 309 kW (414 hp), Fuel: Diesel, Emissions standard: Euro 6, Transmission type: Automatic, Transmission make: ZF, Gears: 12, Power steering, ABS, ASR, PTO, PTO type: 1, Starter battery, Pump, Seat layout: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, Meiller AK 16 NT = Further information = Transmission Transmission: ZF, 12 gears, automatic Axle configuration Tyre size: 315/80R22.5 Brakes: disc brakes Axle 1: Steered; Tyre tread left: 10 mm; Tyre tread right: 7 mm; Suspension: leaf suspension Axle 2: Lift axle; Steered; Tyre tread left: 9 mm; Tyre tread right: 8 mm; Suspension: air suspension Axle 3: Twin mounts; Tyre tread left inside: 14 mm; Tyre tread left outside: 14 mm; Tyre tread right inside: 6 mm; Tyre tread right outside: 13 mm; Suspension: air suspension Nodpfox Rnpnjx Ad Sslc Weights Unladen weight: 12,245 kg Payload: 15,755 kg Gross vehicle weight: 28,000 kg Functionality Pump: Yes Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial Information Leasing rate: €1,009 per month (default, 60 months); please enquire for further information and terms Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a continually changing stock of 1,200 used trucks, tractors, and trailers. Our range comprises all European makes, production years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Good prices • Professional business conduct • We speak many languages • We understand our customers • Support with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of ‘recognizable quality’ • And much more… Please visit our website for special offers and complete inventory. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,002 h, functionality: fully functional, machine/vehicle number: NT100JG0126, turning length: 424 mm, turning diameter: 370 mm, travel distance X-axis: 380 mm, bar passage: 52 mm, controller model: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Bar capacity: 52 mm Turning-milling spindle Full indexing capabilities: Yes X-axis travel: 380 mm Y-axis travel: ± 105 mm Z-axis travel: 460 + 155 mm (ATC) B-axis: ± 120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Tool magazine Number of magazine positions: 38 Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: 70 mm / Ø130 mm (with/without adjacent tools) Maximum tool weight: 5 kg Lower turret X-axis travel: 155 mm Z-axis travel: 610 mm Number of tool slots: 10 Tool speed: 6,000 rpm Drive power for driven tools: 1.5/1.2 kW Main spindle Spindle speed: 6,000 rpm Nodpozf H Ezjfx Ad Sslc Drive power: 11/7.5 kW Spindle bore: 73 mm Chuck type: Hollow chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximum torque: 223 Nm Counter spindle Spindle speed: 1,000 rpm B-axis: 4 fixed positions, 0º, -30º, -180º (-225º for overhang onto conveyor, if available) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Potential rated power: 39.24 kVA Dimensions & Weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Weight: 8,800 kg Operating Hours Power on: 54,061 h Spindle 1 operating hours: 9,813 h Spindle 2 operating hours: 5,002 h EQUIPMENT Chip conveyor Signal lamp High-pressure pump Air blow nozzle outside the spindle Foot switch (dual) for main and counter spindle

Condition: good (used), mileage: 216,019 km, power: 338 kW (459.55 HP), first registration: 03/2018, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 3,950 mm, fuel: diesel, brakes: retarder, color: black, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,950 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, retarder, seat heater, traction control, trailer coupling, - Heated mirrors - Digital tachograph - Tachograph (recording device) - Fixed (set) - Halogen lamp - Short cab - Manual - Power take-off (PTO) - Pump - Radio/cassette - Reversing camera - Lane departure warning system - Seat cover - Central lubrication - Additional brake system Number of axles: 3, Configuration: 6x2, Kerb weight: 12,188 kg, Gross weight: 26,000 kg, Total fuel tank capacity: 260 liters, Trailer coupling, King pin diameter: 40 DIN, Fifth wheel: Fixed, Number of differentials: 1, Central lubrication, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (recording device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: Anthracite, Heated mirrors, Reversing camera, Lighting: Halogen lamp, Lane departure warning system, Climate control, Heated seats, Bluetooth, Engine output: 338 kW (453 hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Gearbox: ZF, Gears: 12, Additional brake system, Retarder brand: Intarder, Power steering, ABS, ASR, Power take-off (PTO), PTO type: 1, Starter battery, System type: Meiller AK16, Pump, Central locking, Seating configuration: 1+1, Seat cover: Seat cover, Seat adjustment: Manual, Meiller AK 16 NT Gearbox Transmission: ZF, 12 gears, automatic Axle configuration Tyre size: 315/80R22.5 Brakes: Disc brakes Axle 1: Steering; Tyre tread left: 4 mm; Tyre tread right: 5 mm; Suspension: Leaf spring Axle 2: Lift axle; Steering; Tyre tread left: 11 mm; Tyre tread right: 10 mm; Suspension: Air suspension Axle 3: Twin tyres; Tyre tread left inside: 12 mm; Tyre tread left outside: 10 mm; Tyre tread right inside: 12 mm; Tyre tread right outside: 11 mm; Suspension: Air suspension Weights Unladen weight: 12,188 kg Payload: 13,812 kg GVW: 26,000 kg Functional Pump: Yes Condition Technical condition: good Visual condition: good Damages: none Number of keys: 4 Financial Information Leasing price: €1,064 per month (default, 60 months); Please inquire for further information and conditions Identification Registration number: KLEYN1 Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range covers all European brands, years of manufacture, and price categories. Why buy at Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Competitive pricing • Fair trading practices • We speak many languages • We understand our customers Nledpfx Asx E Ra Sod Sjc • Assistance with import and transport • (Export) license plates arranged quickly • Skilled technical services • The security of “recognizable quality” • And more.... Please visit our website for special offers and the complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and request an offer on our website. Ask directly about our European warranty package.

Condition: used, Spot Welding Machine SCIAKY type S0 432 NT Capacity: from 0,5 to 6 mm thick Throat depth: 380 mm Arm spacing: from 190 to 340 mm Arm Length: de 250 à 500 mm Pressure: 6 bars Nedpfezg Hv Aex Ad Solc Voltage: 380 V Width: 1100 mm Depth: 500 mm Total height: 1500 mm Weight: approx 500 KG