Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2819-1160, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Csdpfs Ah Slzox Abashd Travel range X-axis: 300 mm Travel range Y-axis: 300 mm Travel range Z-axis: 400 mm Clamping area: 390 × 620 mm Spindle speed: 40–2,500 rpm Spindle taper: SK 40 Quill travel: 60 mm Rapid traverse: 4.0 m/min EQUIPMENT Chip collection tray

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range X-axis: 2,200 mm Travel range Y-axis: 600 mm Travel range Z-axis: 600 mm Number of T-slots: 5 T-slot width: 18 mm T-slot spacing: 125 mm Distance from spindle nose to table: min. 200 mm Tool holder: SK 40 DIN 69871 Pull stud: DIN 69872 Tool clamping force: 12,000 N Inner bearing diameter: 80 mm Spindle speed: max. 8,000 rpm Main spindle motor at 100% duty cycle: 29 kW Main spindle motor (intermittent): 38.5 kW Speed range with constant power from: 1,500 rpm Feed force X, Y and Z axes at 100% duty cycle: 13,000 N Feed force X, Y and Z axes (intermittent): 16,000 N Rapid traverse rate X, Y and Z axes: 30 m/min Working feed rate X, Y and Z axes: max. 10 m/min Milling performance in steel St 60: 650 cm³/min Drilling diameter in steel St 60: 60 mm Threading performance in steel St 60: M36 Cedpfx Ae Afx Hhsbaohd Tool places: 24 Tool length: max. 300 mm Tool weight: max. 10 kg Tool diameter with full magazine: max. 85 mm Tool diameter with free adjacent positions: max. 125 mm Tool change time: 3.5 s Tool change time chip-to-chip: 7 s MACHINE DETAILS Electrical connection: 55 kW Operating voltage: 400 V / 50 Hz Compressed air connection: 6 bar Coolant pump capacity: 0.75 kW EQUIPMENT Tool magazine with random tool management Coolant pump

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 18,000 rpm, controller model: Heidenhain TNC 430, TECHNICAL DETAILS Travel in X-axis: 710 mm Travel in Y-axis: 550 mm Travel in Z-axis: 500 mm Table dimensions: 900 × 600 mm Table load capacity: max. 1,600 kg Cedj Ah H Ilepfx Abaehd Spindle speed: 18,000 rpm Spindle mount: SK 40 MACHINE DETAILS CNC control: Heidenhain TNC 430 Machine weight: approx. 10,000 kg EQUIPMENT High-pressure coolant system High-speed spindle

Condition: used, Year of construction: 1976, functionality: fully functional, Used Weyrauch milling machine, model FR-BM 515, manufactured in 1976. Travel distances: According to the scale: X = 1330 mm Cjds Ah Rntepfx Abajhd Y = 1030 mm Z = approx. 400 mm

Condition: used, travel distance X-axis: 9,000 mm, table length: 2,800 mm, table width: 8,000 mm, table load: 64,000 kg, TECHNICAL DETAILS Longitudinal travel: 9,000 mm Transverse travel: 2,950 mm Vertical travel: 1,250 + 2,200 mm Rapid traverse rates for longitudinal/transverse/vertical axes: 3 / 3 / 2 m/min Table size: 2,800 × 8,000 mm Table division: 5,000 + 3,000 mm Permissible table load: max. 64,000 kg Spindle speed: 20–600 rpm Spindle motor power: 100 kW Spindle torque: 13,000 Nm Spindle mounting: ISO 60 Distance between columns: 3,200 mm Distance from spindle nose to table: 2,806 mm MACHINE DETAILS Overall dimensions: 21,000 × 7,800 × 6,650 mm EQUIPMENT 90° head Cjdps Agftisfx Abajhd Compact 90° head Vertical extension Swiveling head 3-stage gearbox Note: The machine is in good condition. However, an overhaul may be necessary.

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 2838-0410, overall weight: 2,500 kg, We are offering this used DECKEL FP4 NC universal milling and drilling machine, manufactured in 2003. Manufacturer: DECKEL Model: FP4 NC Codpfxe Ah Dlhj Abashd Year of manufacture: 1981, general overhaul in 2003 Machine type: Universal milling and drilling machine If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 124 control, manufactured in 2008. Excellent CONDITION, CE-compliant!! Technical data: >> Year of manufacture: 2008, Machine No. 346199 >> Fixed angular table >> Speed: continuously variable up to 4000 rpm >> Feed rate: continuously variable in 3 axes from 0 to 2000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Rapid traverse rates x/y/z: 5 / 5 / 4 m/min >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke, vertical: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1700 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 12 kVA Accessories and equipment: >> Heidenhain TNC 124 control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system and programming examples >> Handwheels >> Coolant system About the machine: Chjdj Ah Tvbepfx Abasd Offered for sale is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 124 control. This universal milling machine is in very good condition. It comes from a company where it was used only sparingly for training purposes. It features a very easy-to-use control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Switching from vertical to horizontal is very easy, by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site while it is powered up.

Condition: used, Year of construction: 2002, travel distance X-axis: 7,300 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 4,000 rpm, Travelling column milling machine Manufacturer: ANAYAK Type: HVM 8000 Year of manufacture: 2002 Control: Heidenhain Technical details: X-travel: 7,300 mm Y-travel: 1,500 mm Z-travel: 2,000 mm Chjdpsz Ic Alefx Abaod Spindle speed: 4,000 rpm Tool taper: SK 50 Number of tool stations: 40 positions Condition: Used Available: from March 2027 The machine is under power and can be demonstrated. Technical features & accessories: - Control cabinet newly rewired - Orthogonal indexing milling head, 1° + 2.5° - Chip conveyor - Coolant system - Floor plates Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Year of construction: 2020, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE LONGITUDINAL TRAVEL: 12000 mm TRANSVERSAL TRAVEL: 1600 mm VERTICAL TRAVEL: 3600 mm RAPID FEEDS L-T-V: 30 m/min TABLE SIZE: 300 x 2500 x 13000 mm SPINDLE: 450 - 5000 rpm; 34 kW; 830 Nm; ISO 50 HEAD: MILLESIMAL POSITIONING ; UNIVERSAL AUTOMATIC A/B AXIS TOOL MAGAZINE: CHAIN-TYPE ; 100 POS CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 40 Bar WEIGHT: 87480 Kg ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; Chjdpfx Aj Ah I Edjbasd LASER TOOL SETTER ; TOUCH PROBE ; PORTABLE HANDWHEEL NOTE: ROTARY TABLE 1500X1500, 1,5 rpm, MAX ADMITTED LOAD 15.000 Kg; HEAD LOADING/UNLOADING DOUBLE CRADLE; MOBILE WORKING PLATFORM; PERIMETER FENCES; STATIC RTCP OF ROTATING TABLES; STATIC RTCP IN THE SPACE ; AUTOCAL; VIBRATION DETECTION PROBE; COOLING TANK 1500L; GREEN MODE FUNCTION

Condition: used, Year of construction: 1970, Tool milling machine Deckel Type/Model FP1 Condition Used Geometrically overhauled in 2026, including geometry report Year of manufacture approx. 1970 The machine was completely disassembled, thoroughly cleaned, geometrically overhauled, and repainted. Subsequently, it was professionally reassembled, and a comprehensive functional test was performed. The machine geometry was checked. A test report according to DIN 8615 is available. During the work, the gibs were also adjusted, and the coolant pump was overhauled. Technical data Travel ranges X/Y/Z 300 / 150 / 340 mm Spindle stroke 60 mm vertical Tool holder MK 4 Cjdpfxsz A Tn Is Abajhd Speed range 40 to 2,000 1/min Two-stage motor, gear stages Speed steps 16 speeds Feed 16 steps 10 to 500 mm/min Drive power Two-stage motor approx. 1.0 / 1.4 kW Operating voltage 380 V / 50 Hz Total connected load approx. 1.9 kW Clamping surface 600 x 210 mm Max. table load approx. 150 kg Space requirement (W x H x D) approx. 1,100 x 1,000 x 1,500 mm Weight approx. 750 kg Equipment including: - Vertical milling head - Heidenhain 3-axis digital display - Automatic feed - Coolant system with overhauled pump - Equipment scope as shown in the picture Inquiry item: Transportation costs in an individual offer

Condition: used, Year of construction: 2000, machine/vehicle number: VH20011, controller model: Heidenhain TNC 426, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS CNC control: Heidenhain TNC 426 Tool holder: SK 50 EQUIPMENT Cjdpfxs Ah Dtwe Abaohd Rotary milling head Various tool holders Note: The machine is sold without tools.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 28217, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, overall weight: 18,500 kg, The combination of the Zayer 20 KF 3000 machine, the Heidenhain TNC 426 control system, and a swivel universal head (Huron type) transforms this milling machine into a versatile and powerful production hub. The swivel head completely eliminates the biggest drawback of large machines – the need to constantly reposition and re-clamp heavy workpieces for machining at different angles. Here’s how precisely this head works with the Heidenhain system and what possibilities it offers. Kinematics and capabilities of the swivel head. The head in ZAYER machines consists of two inclined dividing planes that rotate relative to each other. This design allows for: Transition from vertical to horizontal: In a few moments, you can change the machine from a vertical machining center to a horizontal milling machine. This makes it possible, for example, to simultaneously machine the top of a workpiece and, a moment later, mill its sides. Milling at any angle: The head allows you to position the spindle in space at unusual angles, which is crucial for machining inclined surfaces, chamfering large plates, or creating converging pockets. Enormous rigidity: Although the head is movable, its design locks with tremendous force (mechanically or hydraulically). The machine does not lose any of its ability to perform heavy rough machining (so-called “hogging” with a large chip). Cycle 19 and PLANE in Heidenhain TNC 426 – The magic of software. The biggest challenge with a swivel head is the mathematics – when you tilt the tool, the zero points in the X, Y, and Z axes change. Heidenhain TNC 426 solves this automatically using dedicated geometric functions: Cycle 19 (Machining Plane): You inform the control system of the angle at which you have physically rotated the head. The computer immediately recalculates the entire coordinate system. The tool moves in the axis at an angle, and you program as if you were working on a flat surface. Coordinate transformation: You don't have to manually calculate the tool offset after rotating the head. The controller knows the exact dimensions of the machine's kinematics and automatically corrects the position of the X, Y, and Z axes. Angular drilling: After calling Cycle 19, the standard drilling cycle (e.g., deep drilling) automatically performs the feed movement in the inclined axis – the operator writes the program in the Z axis, and the machine physically moves with a combination of the X, Y, and Z axes. Production benefits in the workshop. Machining 5 sides of a workpiece from a single setup: You place a 5-ton steel block on the table. You clamp it once. By rotating the head, you machine the top and all four sides without moving the workpiece with a crane. This guarantees perfect maintenance of geometric tolerances (perpendicularity and parallelism of the surfaces). Time savings and safety: Repositioning a large workpiece on the table often takes hours and carries the risk of accidents or damage to the table. With this head, you only reposition the tool – manually using dividing plates or in an automatic version from the program. Chedezrd Tvspfx Abasd

Condition: used, Year of construction: 2010, x-travel 2600 mm y-travel 1100 mm z-travel 900 mm control Heidenhain iTNC530 spindle turning speed range 0-10.000 U/min tool taper SK 50 Tool magazine slots 30 St./pcs. Chjdpfx Ae Ah T Udobaod table surface area 3200 x 1100 mm max. table load 1200 kg rotary table dia. 1050 mm weight of the machine ca. 25550 kg Features/Accessories: -IKZ 40 bar -electric handwheel -technical documentation

Year of construction: 2013, condition: good (used), Ref. -No.: 10717 Manufacturer: POSMILL Type: H 800U Year of construction: 2013 Type of control: CNC Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine number: 2013xxxx X-Travel: 700 mm Y-Travel: 820 mm Z-Travel: 600 mm Tool Taper: HSK-A 63 Tool places: 96 Spindle Speeds: 18.000 RPM Further information: The machine is offered including all available accessories and technical documentation. The machine has been cleaned, is fully operational and can be inspected under power by prior appointment. Cedo Ahw R Nopfx Abajhd

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, We are selling a used 3-axis machining center, WAGNER WMC 1100, in very good condition. The machine was manufactured in Taiwan. It was only used for the production of individual parts and therefore has very few operating and power-on hours. Technical data: Table: 1300 x 600 mm Table load: 500 kg Csdpfx Aj Agwvuobajhd X-axis: 1100 mm Y-axis: 650 mm Z-axis: 600 mm Control: Siemens 828D Tool positions: 24 Spindle head: BT-40 Spindle speed: 8000 rpm Accessories: 1 x Chip conveyor 1 x Band filter 1 x Measuring probe 1 x Broken tool detection 1 x Coolant system 1 x Handwheel

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: 326289/205, travel distance X-axis: 1,600 mm, travel distance Y-axis: 450 mm, overall weight: 3,850 kg, Universal milling machine "Prvomajska GKA-30S" with a complete set of accessories. Work table 1600x450, rotatable. Accessories: Cedo Agrrrspfx Abaohd - new MK40 spindle - vertical and horizontal indexing heads - complete set of mandrels MK 50 and MK 40 - consoles for horizontal milling with mandrels - operating manuals for the milling machine and indexing heads

Condition: reconditioned (used), Year of construction: 1994, operating hours: 27,545 h, functionality: fully functional, machine/vehicle number: 3701104, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 4,000 mm, feed rate X-axis: 2,000 m/min, feed rate Y-axis: 2,000 m/min, feed rate Z-axis: 1,500 m/min, spindle speed (max.): 5,000 rpm, quill stroke: 60 mm, spindle mount: MK 0, total height: 2,000 mm, total width: 2,500 mm, total length: 2,000 mm, table width: 475 mm, table length: 700 mm, type of input current: three-phase, rotational speed (min.): 5,000 rpm, table load: 300 kg, overall weight: 2,000 kg, input voltage: 380 V, workpiece weight (max.): 300 kg, space requirement length: 2,000 mm, space requirement height: 2,000 mm, input current: 25 A, Equipment: documentation/manual, rotational speed infinitely variable, Well-maintained milling machine from a training center, equipped with a HEIDENHAIN TNC 415B control system and an SK 40 milling spindle. It features a hydraulic clamping system and an automatic central lubrication system, and comes with technical documentation and an operating manual. Codpfj Ahfihex Abajhd

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 50166, travel distance X-axis: 9,000 mm, travel distance Y-axis: 2,295 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 9 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 2 m/min, feed rate X-axis: 3 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 2 m/min, spindle speed (max.): 710 rpm, spindle speed (min.): 15 rpm, rotational speed (max.): 710 rpm, total width: 8,500 mm, total height: 7,150 mm, total length: 20,720 mm, table length: 9,000 mm, table width: 2,000 mm, torque: 6,500 Nm, clearance between the columns: 2,750 mm, year of last overhaul: 2003, table height: 1,000 mm, table load: 45,000 kg, spindle motor power: 50,000 W, workpiece weight (max.): 45,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, GENERAL MACHINE CHARACTERISTICS The machine features a rigid gantry design with a movable table. The gantry is equipped with a height-adjustable crossbeam, which can be fitted with one or two vertical spindle heads of type VFS 160. Additionally, the gantry can accommodate one or two lateral (horizontal) spindle heads VFS 160. The specified spindle head types can be equipped with additional spindle heads, with up to 4 available. The clamping surface of the machine consists of two connected clamping tables, which can also be used separately when disconnected (only one can be active at a time). Clamping Table - Dimensions of one table: 2,000 x 4,000 mm - Total length of connected tables: 9,000 mm - Clamping surface of connected tables: 8,500 mm - Clamping T-slots (width x spacing x quantity): 36mm x 180mm x 11 pcs - Working table height from base: 1,000 mm - Load per meter of table length: 5,000 kg - Table travel: 4,250 mm (connected tables: 9,000 mm) - Working feed rate: 15 – 3,000 mm/min - Rapid traverse: 9,000 mm/min Gantry with Height-Adjustable Crossbeam - Clearance between columns: 2,750 mm - Crossbeam vertical adjustment: 2,295 mm - Crossbeam travel: 750 mm/min Vertical Spindle Head VFS 160 - Toolholder taper: ISO 60 - Spindle power: 50 kW - Speed range: 15 – 710 rpm - Working feed: 10 – 2,000 mm/min - Rapid traverse: 2,000 mm/min - Distance from spindle nose to clamping table: 425 – 2,720 mm Horizontal Spindle Head VFS 160 - Toolholder taper: ISO 60 - Spindle power: 50 kW - Speed range: 15 – 710 rpm - Working feed: 5 – 1,000 mm/min - Rapid traverse: 1,000 mm/min - Distance from spindle nose to table centering T-slot: 377 – 1,177 mm Overall Machine Dimensions (L x W x H): 20,720 mm x 8,500 mm x 7,150 mm Additional Spindle Heads: NVS Head (Extension Adapter) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 60 rpm = 40 kW - Max. torque: 6,500 Nm HFUS Head (Universal Milling Head) Cedpfxexpudtj Abashd - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 80 rpm = 22 kW - Max. torque: 2,700 Nm - Swivel range vertical axis: 360° - Swivel range horizontal axis: 360° - Quill adjustment: 50 mm HFOS Head (Double-Sided Right-Angle Milling Head) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 60 rpm = 40 kW - Max. torque: 6,500 Nm

Condition: good (used), Year of construction: 1986, CNC universal milling machine Make DECKEL Type: FP5NC Bj.1986 control DIALOG 4 Cjdpfxj Ahqx Ee Abaehd Traverse paths: X710mm Y600mm Z500mm Clamping table : 1000mm x 550mm Tool clamp: SK40 Feed speed programmable: 2 ... 3600 mm / min Speed: 18 ... 6300 rpm Spindle power: 7.5KW machine in stock.

Condition: good (used), Year of construction: 2020, x-travel 1.300 mm y-travel 290 mm z-travel 450 mm table-size 1.600x 320 mm table load 0,5 t spindle turning speed range 80-5.000 U/min spindle turning speeds of horiz. head: 60-1.800 U/min spindle taper vertical SK40 spindle taper: hori. SK50 quill stroke 127 mm feeds x/y/z -stepless 0-1.000 mm/min rapid traverse X-axis 5 m/min total power requirement 10 kW weight of the machine ca. 2,7 t dimensions of the machine ca. LBH 1,9 x 2,1 x 2,5 m -Swiveling milling head with quill feed; -Horizontal spindle with independent drive; -Pneumatic tool clamping system; -3-axis position display; -Electronic handwheels; Chsdpe Ahzi Nefx Abasd -Pneumatic tool clamping; -Coolant system; -Work light; -Chip tray; -Manual central lubrication; -Hydraulic machine vise; -Various tool holders; -Various horizontal tool holders; -Collet set in a case; -Outboard support (counter-bearing) for horizontal milling

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G551-1586, travel distance X-axis: 800 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 16,000 rpm, position of the milling head: Horizontal, table load: 1,000 kg, overall weight: 22 kg, input voltage: 400 V, Equipment: documentation/manual, GROB G550 / G551 5-axis machining center with TM167 tool magazine and Schuler LoadMaster LMC 900 Selling price: 300,000 Euros Earliest possible pickup date: May 2027 Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end-users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany or the EU • Inclusion of a dual-use statement in the purchase agreement (legally required) Sales/transfer conditions: • Dismantling, removal, and transport are the responsibility of the buyer and at their risk. • The buyer is responsible for providing personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. Technical data Manufacturer: GROB-WERKE GmbH & Co. KG Model: G550 / G551-1586 Machine type: 5-axis universal machining center Year of manufacture: 2015 Control system: Siemens Sinumerik 840D Axes: 5 Tool holder: HSK-A63 Spindle speed: 16,000 min⁻¹ Spindle power: 35 kW Spindle hours: approx. 19,125 h X-axis: 800 mm Y-axis: 770 mm Z-axis: 500 mm Measuring probe: Renishaw IKZ: 70 bar Tool management GROB TM167 additional tool magazine Year of manufacture: 2021 167 additional tool positions Total number of tool positions: 287 Fully integrated into the system Automation Schuler Automation LoadMaster LMC 900 Year of manufacture: 2015 Linear pallet changing system 9 pallet positions Beckhoff/TwinCAT control System is fully functional and ready for operation Condition The manufacturing cell is in good condition and has been in continuous production. The machine has a relatively low number of spindle hours and is equipped with a TM167 additional magazine installed in 2021. According to the operator, no known defects are present. The system is ideally suited for the automated production of demanding 5-axis components in the following areas: Mechanical engineering Automotive industry Aerospace Medical technology Tool and mold making Scope of supply GROB G550 / G551 machining center GROB TM167 tool additional magazine Schuler LoadMaster LMC 900 9 pallets Documentation Inspection Inspection is possible by appointment. The machine can be inspected while powered on. Location: Germany / Waiblingen If you are interested, we look forward to hearing from you so that we can coordinate the further details. Keywords Csdpfx Aezxf Hkebajhd GROB G550, GROB G551, 5-axis machining center, Siemens 840D, TM167, tool magazine, Schuler LoadMaster, LMC900, pallet automation, HSK63, CNC machining center, 5 Axis Machining Center.

Condition: good (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,600 rpm, controller model: DECKEL Contour 3, TECHNICAL DETAILS Cjdpfxs Afxabs Abashd X-axis travel: 400 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Table length: 700 mm Table width: 460 mm Table load capacity: 350 kg Spindle speed: 40–3,600 rpm Tool interface: SK 40 MACHINE DETAILS Control system: DECKEL Contour 3 EQUIPMENT Automatic tool changer

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: 4193, total height: 1,789 mm, total width: 1,300 mm, total length: 1,200 mm, overall weight: 1,500 kg, Weight 1,5 t serial number 4193 ja vice ja x-travel 500 mm length 1200 mm width 1300 mm height 1789 mm Csdpfx Abjzxt Tljaohd

Condition: used, Year of construction: 1970, functionality: fully functional, 1 used: Universal milling machine, second-hand • Manufacturer: Klopp Chodpfxew R T A Eo Abaod • Model: FW 11/4 • Year of manufacture: unknown, approx. 1970 • Table clamping area: 1100 x 300 mm • Spindle taper: SK 40 • Swivelling milling head: 2x 110° • Spindle speeds: 40/80/120/240/480/960 • Feeds: 12–340 mm/min Accessories: Various tool holders and cutters, 1 set of collets Hydraulic vice with pneumatic support pins Vice jaw width: 160 mm

Condition: good (used), TOS fnk 25 – milling machine Table dimensions: 1250 × 290 mm, 800 mm X-axis travel 370 mm Y-axis travel 450 mm Z-axis travel Automatic feed on the drill quill, 3 settings: 0.035 / 0.070 / 0.140 Automatic feed and rapid traverse on the X and Y axes Electric traverse (rapid traverse) on the Z-axis Spindle ISO 40 with a speed of 56–4500 rpm, Table load capacity up to 200–500 kg, Machine dimensions: 1.90 m (length) × 1.70 m (depth) × approx. 2.3 m (height) Machine weight: approx. 1.7 tons. Year of manufacture: 1986 Cjdpfx Abe Ahfd Seaehd