Condition: used, Year of construction: 1995, material width 400 mm coil weight 2 x 2,0 t material thickness 0,4 - 3,0 mm coil internal diameter 460 - 530 mm coil external diameter 1500 mm material cross-cut 1200 mm² no. of straightening rolls 9 straightening roll diameter 30 mm speed 0 - 40 m/min power requirement 15,0 kW Weight 5,2 t Dimensions (WxDxH) 2,15 x 4,5 x 2,85 m - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll Dusb Hasv Svaxe Uyxet - coil loop control via ultrasound

Condition: used, Star SR-20 Type 530G Sliding Head CNC Lathe with Fanuc 16T Control, 5 Axis, Twin Spindle, 6 Turning Tool Bays, 3 End Collet Bays, 3 Side Collet Bays, 3 End Boring Bays, Serial No. 010804, FMB Turbo 3 - 26 Bar Feed, Max Bar Length 3800mm Country of Origin: Japan Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Dsb Hjwhpaija Uyxjut

Condition: used, Year of construction: 2023, tank 1.300 l Pressure of pump 8 / 20 / 80 bar total power requirement 18,4 kVA weight of the machine ca. 1,2 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Coolant System BMF - BFU 1300 S/80/20/8+ Z/K - NEW, unused - universally applicable - can be controlled via contactors Djb Haowgd I Eo Uyxeut - Number of pumps: 4 - Pump capacity: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C -,- kW, 3,447 rpm, 2.3 m³/h, 38.3 l/min, pressure 25 bar, max. temperature 90°C 2.2 kW, 2,899 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. centrifuge (Ruma MZ 35) Technical Data: - Rotor speed: 4,615 rpm - Rotor diameter: 230 mm - Temperature (min/max): 10 - 50 °C - Flow rate (min/max): 10 - 35 l/min - Max. solids quantity: 6 kg - Rated power: 2 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW

Condition: new, Year of construction: 2025, Y250 HC10 Laser Laser Welding System Compact, Flexible, Easy to Use - Integrated Robot Controller (YRC1000) - Yaskawa HC10DTP Cobot - Inxpect Radar Sensors / Increased Safety - Easy Mobility with the Pallet Truck - Extremely Simple Programming - Easy to Teach with the Yaskawa Smartpendant - Industrial Mode for Increased Speed Scope of Delivery: 1x Yaskawa HC10DTP Cobot with Integrated Robot Controller (YRC1000), Profinet, and Smartpendant (tablet programming device). Delivered assembled and ready for use on the robot platform. 3x Inxpect Radar Sensors / mounted on the robot platform. 1x Raycus 2kW fiber laser with water cooling 1x Wire feeder for the following wire thicknesses: Ø0.8, 1.0, 1.2, and 1.6 mm. 1x Ospri LWD200 laser head, QBH connector, 75mm collimator, 200mm focal length, water-cooled, including CDD camera and screen. 1x starter set consisting of: 1x Univet laser safety goggles, 5x protective lenses, 5x spare nozzles. Solid robot platform The mobile robot platform consists of a sturdy welded steel construction (250 kg weight) with a powder coating. This allows the robot to run at 100% speed while remaining mobile! Easy to position with the pallet truck. Laser power, power with reserves! Laser power: 1.5 kW - 2.0 kW - 3.0 kW RAYCUS RESONATOR Example: With the 2.0 kW fiber laser source, it is possible to weld steel up to 6 mm, stainless steel up to 5 mm, and aluminum up to 4 mm. The laser is a pure industrial device with water cooling for 24/7 continuous operation. TECHNICAL DATA -Model: Y250 HC10 2KW LASER -Range: 1400mm Deb Ha Uswhn N Neyxsut -Laser Power: 1500-3000W -Total Weight: 350kg -Safety: Inxpect radar sensors -Cobot repeatability: 0.05mm -Wire feed: Ø0.8, 1.0, 1.2, 1.6mm -Mild steel up to 6mm -Stainless steel up to 5mm -Aluminum up to 4mm -Cobot power consumption: 1KVA -Base dimensions: L x W x H 950mm x 750mm x 880mm -Water cooling: Yes

Condition: new, Traub Rollers for Stamag Bar Loaders DN60, DN61, DNH61, 707451, 10561157 (1) Item No.: 707451 (2) Item No.: 10561157 Condition: New Rollers for Stamag DN60, DN61, DNH61, 707451, 10561157 Price per piece. Inner diameter: 17mm Outer diameter: 120mm Thickness: 35mm Traub rollers for Stamag bar loaders DN42, DNH42, 715078, 10828092 VST (1) Item no.: 715078 (2) Item no.: 10828092 Condition: New Rollers for Stamag DN42, DNH42, 715078, 10828092 Price per piece. Inner diameter: 15mm Outer diameter: 85mm Thickness: 23mm Traub rollers for Stamag bar loader DN26 DN30 DNH32 606990 687385 (1) Item no.: 606990 (2) Item no.: 10837472 Condition: New Duob Haewhn I Se Uyxjt Rollers for Stamag DN26, DN32, DNH30, 606990, 10837472, 687385 Price per piece. Inner diameter: 10mm Outer diameter: 60mm Thickness: 15mm

Condition: used, Year of construction: 2006, operating hours: 6,500 h, Functionality: fully functional, grinding length: 2,000 mm, grinding width: 600 mm, total length: 2,000 mm, total width: 850 mm, workpiece weight (max.): 2,300 kg, grinding height: 750 mm, grinding wheel diameter: 450 mm, table speed: 40 mm/min, spindle speed (max.): 1,500 rpm, power: 15 kW (20.39 HP), input voltage: 400 V, - Machine in very good condition, with few operating hours. - Additional screen installed for better visibility of axis positions. - Accessories included with the machine: see photos. Dob Ha Uyewhn Hnoxout -Video available on demand. Installation possible by us: quote available.

Condition: used, Year of construction: 2004, Pressure 630 t stroke 800 mm distance between columns 2600 mm Distance table/ram, max. stroke up, adjustment up 1500 mm Table surface area 2500 x 1300 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 300 mm Dueb Hajv Svaro Uyxjt Ram surface 2500 x 1300 mm Side window 1040 mm feed down 600 mm/s feed up 360 mm/s working feed 14 - 42 mm/s power requirement 145,0 kW Weight 85,0 t dimensions (WxDxH) 4,2 x 4,0 x 7,8 m height over floor 6,80 m height beneath floor 1,0 m Demonstration machine from technical university with approx. 920 operating hours! Mint condition! permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, upper and lower stroke limitation, light-guard (Sick) on front and back, hydraulic drawing cushion in table with ejector function, hydraulic cutting impact cushioning, mechanical depth stop via 4 motor-adjustable spindles, hydraulic ram interlocking, two-hand operation 2 tool changing consoles, 4 hydraulic ball roller tracks, 4 dampening elements

Condition: used, Year of construction: 2007, Star SR-20RIII Type 680 Sliding Head CNC Lathe with Fanuc 300iS Control, 5 Axis, Twin Spindle, 14 Turning Tool Bays, 4 End Collet Bays, 4 End Collet Bays, 5 Side Collet Bays, Nobec Fire Suppression System. S/No. 0119 (008) (2007) Run Time - 14998H42M95, FMB Turbo 3 - 36 Barfeed, 3200mm Max Work Piece Length. S/No. 41-260-479/R 565589. Star G42000 High Pressure Coolant System. S/No. 222 (2007) Country of Origin: Japan Dob Haowhn Uxo Uyxout Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2022, tank 1.300 l Pressure of pump 8 / 20 / 80 bar total power requirement 18,4 kVA weight of the machine ca. 1,2 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Coolant System BMF - BFU 1300 S/80/20/8+ Z/K - NEW, unused - universally applicable - can be controlled via contactors - Number of pumps: 4 - Pump capacity: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C -,- kW, 3,447 rpm, 2.3 m³/h, 38.3 l/min, pressure 25 bar, max. temperature 90°C 2.2 kW, 2,899 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. centrifuge (Ruma MZ 35) Technical Data: - Rotor speed: 4,615 rpm - Rotor diameter: 230 mm - Temperature (min/max): 10 - 50 °C - Flow rate (min/max): 10 - 35 l/min - Max. solids quantity: 6 kg Dusb Haewgd Ixj Uyxet - Rated power: 2 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW

Condition: good (used), cut-to-length machine Dsbowgd Dyj Ha Uyxout

Condition: new, Traub Telescopic Cover, Telescopic Sheet, 945334 TNC42 TNC65 (1) Item No.: 945334 (2) Item No.: 10732161 Condition: New Traub Telescopic Cover, Telescopic Sheet, 945334 TNC42 TNC65 Duobjwhn H Uo Ha Uyxjt

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, machine/vehicle number: B0702A0549, Trumpf Trubend 7036 press brake Press force 360 kN/36 t Dujb Hou A Dcaea Uyxjt Bending length 1020 mm 6-axis controlled backgauge BendGuard Graphic control Automatic tool clamping Tool-free

Condition: used, Year of construction: 1977, pressure 050 t throat 255 mm stroke 8 - 120 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 640 x 500 mm hole in the table 250 x 180 mm table height over floor 710 - 930 mm table adjustable 220 mm ram surface 550 x 170 mm Dusb Hevzxr Aoa Uyxjt ram adjustment 70 mm power requirement 4,0 kW weight 3,1 t dimensions (WxDxH) 1,5 x 1,5 x 2,3 m year of manufacture 1951 - modernized 1977 permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual central lubrication, foot operation as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 2012, XYZ SLX425X 1,250 CNC Lathe. S/No. L522 (2012) with Prototrak SLX Control. Country of Origin: United Kingdom Dusb Ha Uyowhn Swjxjt Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2023, tank 1.300 l Pressure of pump 8 / 20 / 80 bar total power requirement 18,4 kVA weight of the machine ca. 1,2 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Coolant System BMF - BFU 1300 S/80/20/8+ Z/K - NEW, unused - universally applicable - can be controlled via contactors - Number of pumps: 4 - Pump capacity: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C -,- kW, 3,447 rpm, 2.3 m³/h, 38.3 l/min, pressure 25 bar, max. temperature 90°C 2.2 kW, 2,899 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. centrifuge (Ruma MZ 35) Technical Data: - Rotor speed: 4,615 rpm - Rotor diameter: 230 mm - Temperature (min/max): 10 - 50 °C - Flow rate (min/max): 10 - 35 l/min - Max. solids quantity: 6 kg - Rated power: 2 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg Duob Ha Uyowgd Irexst - Connected power: 2.5 kW

Condition: used, Year of construction: 2007, Haas TL-2CE CNC Lathe. S/No. 3080208 (2007) with Haas CNC Control, 300mm 3 Jaw Chuck, Tailstock. Country of Origin: U.S.A Dusb Hajwhn Ryo Uyxot Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2022, tank 1.300 l Pressure of pump 8 / 20 / 80 bar total power requirement 18,4 kVA weight of the machine ca. 1,2 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Coolant System BMF - BFU 1300 S/80/20/8+ Z/K - NEW, unused - universally applicable - can be controlled via contactors - Number of pumps: 4 - Pump capacity: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C -,- kW, 3,447 rpm, 2.3 m³/h, 38.3 l/min, pressure 25 bar, max. temperature 90°C 2.2 kW, 2,899 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C Dujbswgd Ilo Ha Uyxjt - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. centrifuge (Ruma MZ 35) Technical Data: - Rotor speed: 4,615 rpm - Rotor diameter: 230 mm - Temperature (min/max): 10 - 50 °C - Flow rate (min/max): 10 - 35 l/min - Max. solids quantity: 6 kg - Rated power: 2 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW

Condition: used, Year of construction: 2007, Hurco TM8 CNC Lathe. S/No. TM8-01111057AAA (2007) with Winmax Control, Collet Chuck, Tooleye, Parts Catcher, 12 Station Turret, Tailstock, Swarf Conveyor, Multi-feed, Bar Feed Djb Ha Ujwhn Npoyxout Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2017, Hurco TM6i CNC Lathe. S/No. ST6-16101AZEAAAH (2017) with Minmax Lathe Control, 200mm Diameter 3 Jaw Chuck, Tooleye, Parts Catcher, 12 Station Turret, Hydraulic Tailstock, Swarf Conveyor, Hydrafeed Multi-feed 35 Barfeed Deb Hswhn Huja Uyxsut Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2004, Haas VF-2DHE Vertical Machining Centre. S/No. 34618 (2004), 24 Position ATC, Table Size 915 x 355mm, SK40 Taper. Country of Origin: U.S.A. This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Dob Haewhn Edo Uyxsut

Condition: used, Year of construction: 2008, Hurco VMX30M Vertical Machining Centre. S/No. S342-06119078DJA (2008) with Max Control, Table Size 1020 x 510mm Dusb Ha Uswhn Aisyxjt Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2011, Hurco VMX30M Vertical Machining Centre. S/No. S342-16102081DJA (2011) Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Dueb Ha Uewhn Aceyxet

Condition: used, Year of construction: 2017, Hurco VM5i Vertical Machining Centre. S/No. S5-1610487CKLAH (2017) with Minmax Mill Control, 16 Position ATC, Table Size 455 x 355mm, 10k Spindle, Spindle Taper SK40 Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Dujb Ha Uswhnz Ejyxot

Condition: used, Year of construction: 2016, Hurco VMX30Mi Vertical Machining Centre. S/No. S343S-160466JKAAH (2016) with Winmax Mill Control, 30 Position ATC 10K Spindle, Spindle Taper SK40, Table Size 1020 x 510mm, Swarf Conveyor Duob Howhnzlsa Uyxst Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2019, Hurco VM30i Vertical Machining Centre. S/No. S3014106919FKAAH (2019) Winmax Mill Control, 10K Spindle, 20 Position ATC, Spindle Taper SK40, Swarf Conveyor, Table Size 1320 x 510mm Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Duob Hswhnrqea Uyxst