Condition: reconditioned (used), Year of construction: 2011, operating hours: 59,693 h, Functionality: fully functional, laser power: 2,700 W, travel distance X-axis: 2,585 mm, travel distance Y-axis: 1,280 mm, controller model: Sinumerik 840D, TECHNICAL DETAILS X-travel: 2,585 mm Y-travel: 1,280 mm Control: Sinumerik 840D Power and Capacities Laser power: 2,700 W Max. sheet thickness: 8 mm Max. punching force: 180 kN Max. workpiece weight: 230 kg Travel speeds X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X+Y): 108 m/min Stroke sequences Punching (E = 1 mm): 1,000 rpm Marking: 2,800 rpm C-axis (punching / tapping): 330 rpm Tool technology Linear magazine: 21 tools with 2 clamps MultiTool: 5/10-station (max. 230 Tools) Tool change time: 0.3 – 3.2 s Mounting: hydraulic Mono-tool holder, 360° rotation for all tools Laser technology Laser source: TLF 2700, RF-excited (CO₂) Laser control: DIAS 3 Cutting head: 5" lens + 7.5" lens Dusbvcwswhpu He A Tot Features: APC distance control, lens monitoring, programmable cutting gas pressure Functions: HI-LAS, SprintLas, ContourLas, AutoLas Plus, MultiTool, thread forming, marking/fast beading Punching technology Punching head: hydraulic, 360° rotation Length compensation/lubrication: automatic MACHINE DETAILS Space requirement (L x W): 8,000 x 7,165 mm Height: 2,710 mm Weight: 16,000 kg Operating hours On-time: 64,320 h Laser operating hours: 59,693 h Beam operating hours: 21,394 h EQUIPMENT - 3 clamps - Cooling unit - Extraction system - Part chutes / ejection cylinders (500 x 500 mm, sensor-monitored) - MultiTool - Multi-beam light barriers - Hydraulic quick-release system - Extraction system and compact dust protection device against scattered radiation on the cutting head

Condition: ready for operation (used), Functionality: fully functional, X-Y axis coordinate travel: 290 x 220 mm Z-axis coordinate travel: 300 mm Table dimensions: 500 x 250 mm Debowhpuyovcw A Teut Max. electrode weight: 30 kg Max. workpiece weight: 100 kg Max. dielectric mirror: 250 mm Distance table to spindle sleeve: 150 - 450 mm Connected load: 15 kVA Machine weight: approx. 1000 kg

Condition: used, Year of construction: 2006, bending angle: 150 °, total length: 3,000 mm, pipe diameter: 35 mm, wall thickness: 3 mm, input voltage: 380 V, 2006 wafios BER35 Duobvcw Asvftpds Tet

Condition: excellent (used), Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 1998-3-45, technically efficient, ready to work - after full service engine: 3 kW/400V cutter diameter: 250 mm milling width: 305 mm Dujbvowhpnyecw A Tst cooling and lubrication installation material bumper rotated in both directions up to 20° vertical and horizontal pneumatic profile clamping pressure reducer

Condition: excellent (used), Year of construction: 2011, Prima Industrie Platino 1530 laser cutting machine only 4300 hours cutting hours Dobvcweivg Hgj A Tjut This Prima Industrie Platino 1530 laser cutting machine 4,0kW CO2 was manufactured in Italy in the year 2011 and installed at the end of 12/2011. PRIMACH 20 L control unit.

Condition: good (used), hydraulic press brake with manual stop, in good condition. Dusbjwgfdhevcw A Tst

Condition: ready for operation (used), Year of construction: 2009, operating hours: 54,710 h, Functionality: fully functional, laser power: 4,000 W, sheet thickness (max.): 8 mm, travel distance X-axis: 2,550 mm, travel distance Y-axis: 1,250 mm, TECHNICAL DETAILS X-axis working range: max. 2,550 mm Y-axis working range: max. 1,250 mm Control: Rexroth IndraMotion MTX Travel speeds X-axis: 100 m/min Y-axis: 60 m/min Simultaneous (X and Y): 116 m/min C-axis and stroke sequences C-axis punching: 330 rpm C-axis tapping: 330 rpm Max. stroke sequence punching (E = 1 mm): 1,200 rpm Max. stroke sequence marking: 2,800 rpm Tool technology Linear magazine: 22 tools with 3 clamps Number of tools when using MultiTool: 22 – 220 Tool change time: 0.3 – 2.8 s Laser Laser power: 4,000 W Laser type: CO₂ laser TruFlow 4000 Lens: 170 mm C-axis rotation: 360° Laser control: TASC Functions: Thread forming, MultiBend, MultiTool, deburring, and rolling technology Punching Punching force: 220 kN Punching head: electro-hydraulic Tool rotation: 360° Pressure clamp: programmable (active / passive / repositioning) MACHINE DETAILS Dimensions (L x W): 8,000 x 6,700 mm Height: 2,500 mm Weight: 24,100 kg Operating times Control operating time: 58,842 h Laser operating time: 54,710 h Beam operating time: 15,518 h EQUIPMENT - 3 Clamping clamps - Slag cone detection - Flap for laser parts 500 x 500 mm with sensor - 2 good part containers for punched and laser parts - Chip container - Ejection cylinder for laser parts - Quick-change device for cutting head - Punch slug extraction - Adaptive stroke calibration - Programmable hold-down device (active/passive/repositioning) - Tool length compensation - Active die - Parts conveyor belt at punching and laser station - Chip conveyor with tilting container Djbvowhpbtocw A Tout - Blow-out device for small parts - SheetMaster with suction frame (36 suction cups, Y-axis 400 mm, V-axis 170 mm) - Skiving suction cup with vacuum sensor - Automatic clamp closing - Sheet thickness gauge for double sheet control - GripMaster with scrap skeleton tilting pallet (2,500 x 1,250 mm) - Double unloading cart - Parts conveyor belt Punching station - Parts conveyor belt, laser station - Storage interface - Table extension - Brush tables - Various safety devices

Condition: used, Year of construction: 1996, Bridgeport VMC 760/22 Vertical Machining Centre with Heidenhain TNC 370 Control, 3 Axis, 22 Tool ATC, 1000 x 500mm Bed, Airbench Oil Mist Filter System. S/No. 21108 (1996) Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Dobvcw Ajwhpbgj Tsut

Condition: repair required (used), Year of construction: 1997, Functionality: limited functionality, Used Soraluce model SP 10000 traveling column CNC bed type milling centre with 2.5° automatic universal milling head, 60-station automatic tool changer and Siemens 840D control system. Serial Number: 108537. YEAR OF MANUFACTURE: 1997. TABLE LENGTH 10000 MM TABLE WIDTH 1100 MM COLUMN HORIZONTAL TRAVEL (X) 8500 MM HEAD VERTICAL TRAVEL (Y) 1600 MM RAM CROSS TRAVEL (Z) 1200 MM SPINDLE TAPER BT50 SPINDLE SPEEDS 20 – 2000 RPM SPINDLE MOTOR 22 Kw FEED RATES/MIN 5 – 5,000 MM RAPID TRAVERSE RATE/MIN 15,000 MM AUTO TOOLCHANGER 60 STATIONS ELECTRICAL SUPPLY 415V, 3PH, 50HZ FEATURES AND EQUIPMENT Horizontal/Vertical toolchange facility, Operators platform, Head preparation for through tool coolant, Coolant system with 500 Litre tank and 3 and 8 bars pressure 50 L/Min flow, Electronic handwheel, Heidenhain linear scales, Linear recirculating slideway system. With 1000mm diameter integrated horizontal/vertical rotary table. LENGTH 14,785 MM WIDTH 4,770 MM HEIGHT 4,420 MM WEIGHT 30,000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy. Dusbvcw Ajwgd Rms Tet

Condition: good (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 2396, overall weight: 140 kg, rotational speed (min.): 2,800 rpm, Total width: 240 mm Dujbvcowhpnajw A Tet Total height: 120 mm Spindle speed (min): 4,000 rpm Spindle speed (max): 7,000 rpm Total weight: 300 kg Rotation speed (max): 7,000 rpm Rotation speed (min): 4,000 rpm Input voltage: 400 V Equipment: Rotation speed infinitely variable Soundproof automatic overhead milling machine. Adjustable feed and rotation speed. Milling at an angle from -45° to 45° by adjusting the fence. Easy and quick blade change thanks to the pneumatic quick coupler. Pjbtxbovf Nw Roq H Iepr

Condition: new, Year of construction: 2025, Y250 HC10 Laser Laser Welding System Compact, Flexible, Easy to Use - Integrated Robot Controller (YRC1000) - Yaskawa HC10DTP Cobot - Inxpect Radar Sensors / Increased Safety - Easy Mobility with the Pallet Truck - Extremely Simple Programming - Easy to Teach with the Yaskawa Smartpendant - Industrial Mode for Increased Speed Scope of Delivery: 1x Yaskawa HC10DTP Cobot with Integrated Robot Controller (YRC1000), Profinet, and Smartpendant (tablet programming device). Delivered assembled and ready for use on the robot platform. 3x Inxpect Radar Sensors / mounted on the robot platform. 1x Raycus 2kW fiber laser with water cooling 1x Wire feeder for the following wire thicknesses: Ø0.8, 1.0, 1.2, and 1.6 mm. 1x Ospri LWD200 laser head, QBH connector, 75mm collimator, 200mm focal length, water-cooled, including CDD camera and screen. 1x starter set consisting of: 1x Univet laser safety goggles, 5x protective lenses, 5x spare nozzles. Solid robot platform The mobile robot platform consists of a sturdy welded steel construction (250 kg weight) with a powder coating. This allows the robot to run at 100% speed while remaining mobile! Easy to position with the pallet truck. Laser power, power with reserves! Laser power: 1.5 kW - 2.0 kW - 3.0 kW RAYCUS RESONATOR Duebvcwswhn N Nj A Tst Example: With the 2.0 kW fiber laser source, it is possible to weld steel up to 6 mm, stainless steel up to 5 mm, and aluminum up to 4 mm. The laser is a pure industrial device with water cooling for 24/7 continuous operation. TECHNICAL DATA -Model: Y250 HC10 2KW LASER -Range: 1400mm -Laser Power: 1500-3000W -Total Weight: 350kg -Safety: Inxpect radar sensors -Cobot repeatability: 0.05mm -Wire feed: Ø0.8, 1.0, 1.2, 1.6mm -Mild steel up to 6mm -Stainless steel up to 5mm -Aluminum up to 4mm -Cobot power consumption: 1KVA -Base dimensions: L x W x H 950mm x 750mm x 880mm -Water cooling: Yes

Condition: used, Year of construction: 1993, Pressure 250 t stroke 500 mm distance between columns 1650 mm side window 750 mm Dusbvjv Svb Ascw A Tot daylight 1200 mm table surface area 1650 x 1250 mm die cushion capacity in table 80 t die cushion stroke in table 250 mm die cushion area in table 1070 x 780 mm table height over floor 850 mm ram surface 1650 x 1250 mm speed down 10 mm/s speed up 80 mm/s working speed 10 mm/s oil volume 400 l power requirement 22,0 kW Weight 21,5 t dimensions (WxDxH) 2,7 x 2,3 x 4,25 m height above floor 4,0 mm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure and way, hydraulic drawing cushion in table, hydraulic cutting impact cushioning (4x Parallel holding cylinders), two-hand operation, hand lever operation

Condition: used, Star SR-20 Type 530G Sliding Head CNC Lathe with Fanuc 16T Control, 5 Axis, Twin Spindle, 6 Turning Tool Bays, 3 End Collet Bays, 3 Side Collet Bays, 3 End Boring Bays, Serial No. 010804, FMB Turbo 3 - 26 Bar Feed, Max Bar Length 3800mm Country of Origin: Japan Dujbvcewhpaijw A Tst Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 1998, Functionality: fully functional, Used Soraluce model SP 8000 traveling column CNC bed type milling centre with 2.5° automatic universal milling head, 40-station automatic toolchanger and Heidenhain 426 CB control system. Serial Number: 108540. YEAR OF MANUFACTURE: 1998. Djbvjwgd Rgecw A Teut TABLE LENGTH 8000 MM TABLE WIDTH 1100 MM COLUMN HORIZONTAL TRAVEL (X) 6500 MM HEAD VERTICAL TRAVEL (Y) 1600 MM RAM CROSS TRAVEL (Z) 1200 MM SPINDLE TAPER BT50 SPINDLE SPEEDS 20 – 2000 RPM SPINDLE MOTOR 22 Kw FEED RATES/MIN 5 – 5,000 MM RAPID TRAVERSE RATE/MIN 15,000 MM AUTO TOOLCHANGER 40 STATIONS ELECTRICAL SUPPLY 415V, 3PH, 50HZ FEATURES AND EQUIPMENT Horizontal/Vertical toolchange facility, Operators platform, Head preparation for through tool coolant, Varilock R80, Coolant system with 350 Litre tank and 3 and 8 bars pressure 50 L/Min flow, Electronic handwheel, Sliding splash guard system, Heidenhain linear scales, Linear recirculating slideway system. Eimeldingen 2000mm diameter integrated rotary table with additional frontal tables extensions 5000mm x 1600mm. LENGTH 10,250 MM WIDTH EXCLUDING ADDITIONAL BEDS 4,455 MM HEIGHT 3,800 MM WEIGHT 28,000 KGS

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 714, Tekna TK 641 high-performance post milling machine 1.5 HP engine RPM 7200 Weight 195 kg Ability to machine profile ends at any angle from 45° to 90° Debvewhpmpecw A Tjut Automatic cutting lubrication. Built-in safety devices. Automatic chip removal. High rotation speed for a perfect finish. Maximum cutter diameter: 160 mm Speed: 2800 rpm Engine: 1.5 kw

Condition: used, Year of construction: 2011, Pressure 200 t stroke 900 mm Debvcwjv Svbvo A Tjut distance between columns 3520 mm Distance table/ram, max. stroke up, adjustment up 1400 mm Table surface area 3500 x 1600 mm Ram surface 3500 x 1600 mm Side window 1150 mm feed down 500 mm/s feed up 550 mm/s working feed 38 mm/s oil volume 2000 l power requirement 90,0 + 21,0 kW Weight 34,00 t dimensions (WxDxH) 4,4 x 3,3 x 5,5 m permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back (cascading), hydraulic ram interlocking, operation with up to 4 operator's possible

Condition: used, Year of construction: 2007, Star SR-20RIII Type 680 Sliding Head CNC Lathe with Fanuc 300iS Control, 5 Axis, Twin Spindle, 14 Turning Tool Bays, 4 End Collet Bays, 4 End Collet Bays, 5 Side Collet Bays, Nobec Fire Suppression System. S/No. 0119 (008) (2007) Run Time - 14998H42M95, FMB Turbo 3 - 36 Barfeed, 3200mm Max Work Piece Length. S/No. 41-260-479/R 565589. Star G42000 High Pressure Coolant System. S/No. 222 (2007) Country of Origin: Japan Duebvswhn Uxocw A Tot Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Functionality: fully functional, Year of construction: 2008, machine/vehicle number: 9123, massive, rigid milling machine for large posts with a milling cutter that can be adjusted steplessly vertically manual feed 2.2 kW 400V motor 2,800 rpm milling cutter speed maximum milling cutter diameter 300mm profile mounted at an angle of 20°-90°-20° (according to the scale) maximum cut-out width 400mm (at an angle of 90°) maximum cut-out depth 110mm maximum profile height 190mm Djbvcwowhpk Ij A Tsut stepless milling height adjustment (handwheel and scale), adjustment range 0 - 100mm quick cutter change system pneumatic material clamping cooling and lubrication system

Condition: used, Year of construction: 2008, material width 600 mm coil weight 2 x 1,5 t coil internal dia. 370 - 630 mm coil outside dia. 1560 mm speed 12 U/min Power capacity 1,1 kW Weight 1,5 t Dimensions (WxDxH) 2,5 x 1,2 x 1,9 m double decoiler, swivellable with motor, manual expansion, coil loop control Debvov Svbijcw A Tout

Condition: used, Year of construction: 2012, XYZ SLX425X 1,250 CNC Lathe. S/No. L522 (2012) with Prototrak SLX Control. Country of Origin: United Kingdom Duobowhn Swevcw A Tst Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 1992, pressure 6,3 t stroke 305 mm throat 250 mm dayligth 850 mm table surface area 470 x 450 mm table height over floor 800 mm ram surface 40 mm feed down 120 mm/s feed up 510 mm/s Dujbvcev Svbcsw A Tot working feed 21 mm/s oil volume 175 l power requirement 2,2 kW Weight 1,5 t dimensions of the machine ca. 1,0 x 1,55 x 2,6 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Year of construction: 2007, Haas TL-2CE CNC Lathe. S/No. 3080208 (2007) with Haas CNC Control, 300mm 3 Jaw Chuck, Tailstock. Country of Origin: U.S.A Duebvcw Aewhn Ryo Tet Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 1999, Pressure 400 t stroke 800 mm distance between columns 2820 mm Side window 950 x 1100 mm distance table/ram (stroke up) 1600 mm table surface area 2800 x 1200 mm die cushion capacity in table 150 t die cushion stroke in table 200 mm die cushion area in table 2000 x 800 mm table height over floor 650 mm ram surface 2800 x 1200 mm speed down 420 mm/s speed up 300 mm/s working speed 17,5 - 29,5 mm/s oil volume 2500 l power requirement 75,0 + 22,0 kW Weight 50,0 t Dusbvev Sva Secw A Tjt dimensions (WxDxH) 4,1 x 2,8 x 7,2 m height over floor 6,15 m permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, hydraulic ram interlocking, two-hand and four-hand operation

Condition: used, Year of construction: 1995, material width 400 mm coil weight 2 x 2,0 t material thickness 0,4 - 3,0 mm coil internal diameter 460 - 530 mm coil external diameter 1500 mm material cross-cut 1200 mm² no. of straightening rolls 9 straightening roll diameter 30 mm Djbjv Svaxovcw A Tjut speed 0 - 40 m/min power requirement 15,0 kW Weight 5,2 t Dimensions (WxDxH) 2,15 x 4,5 x 2,85 m - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll - coil loop control via ultrasound

Condition: used, Year of construction: 2004, Pressure 630 t stroke 800 mm distance between columns 2600 mm Distance table/ram, max. stroke up, adjustment up 1500 mm Table surface area 2500 x 1300 mm pressure of drawing cushion in table 300 t Dobvcwjv Svars A Tout Die cushion stroke in table 300 mm Ram surface 2500 x 1300 mm Side window 1040 mm feed down 600 mm/s feed up 360 mm/s working feed 14 - 42 mm/s power requirement 145,0 kW Weight 85,0 t dimensions (WxDxH) 4,2 x 4,0 x 7,8 m height over floor 6,80 m height beneath floor 1,0 m Demonstration machine from technical university with approx. 920 operating hours! Mint condition! permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, upper and lower stroke limitation, light-guard (Sick) on front and back, hydraulic drawing cushion in table with ejector function, hydraulic cutting impact cushioning, mechanical depth stop via 4 motor-adjustable spindles, hydraulic ram interlocking, two-hand operation 2 tool changing consoles, 4 hydraulic ball roller tracks, 4 dampening elements