Condition: used, Year of construction: 2008, operating hours: 21,000 h, Counter spindle - Y-axis - Coolant system with paper filter. Oil mist extraction Bar loader Max. turning diameter: 324 mm Max. turning length: 600 mm Main spindle Spindle head diameter (flat flange): 170h5 mm Max. bar diameter: 65 mm Spindle diameter (front bearing): 120 mm Spindle bore: 79 mm Drive power S1, 100% duty cycle: 25 kW Speed range: up to max. 5,000 rpm Torque S1, 100% duty cycle: 270 Nm Breaking speed: 900 rpm C-axis (main spindle) Speed: 250 rpm Holding torque: 200 Nm Pitch accuracy: 0.025° Counter spindle Spindle head diameter (flat flange): 140h5 mm Max. bar diameter: 42 mm Spindle diameter (front bearing): 90 mm Spindle bore: 57 mm Drive power S1, 100% duty cycle: 25 kW Speed range: up to max. 7,000 rpm Torque S1, 100% duty cycle: 160 Nm Articulating speed: 1,500 rpm C-axis (counter spindle) speed: 250 rpm Holding torque: 120 Nm Indexing accuracy: 0.025° Cross slide (X/Y/Z) Transverse travel (X): 185 mm Longitudinal travel (Z): 635 mm Vertical travel (Y): +40 mm Rapid traverse speed (X/Y/Z): 60/15/45 m/min Feed force (X/Y/Z): 3.5/7/7 kN Ball screw (Y): 40x5 mm Ball screw (Z): 40x15 mm Counter spindle (Z2) Longitudinal travel: 666 mm Input speed: 45 m/min Ball screw: 40x15 mm Tool holder Driven tools: 12 Shaft diameter (VDI 69880): 40 mm Max. power: 9.4 kW Torque: 20 Nm Speed range: up to max. 4,500 rpm Dohxewhw Nfszuf Iout

Condition: used, Year of construction: 2004, Functionality: unexamined, machine/vehicle number: 17441, installation height: 500 mm, pressing force: 6 t, overall weight: 1,450 kg, stroke distance: 250 mm, pressure: 202 bar, LAUFFER Press Machine Type: EK S 3 Year of Manufacture: 2004 Weight: 1450 kg Dshxowhw Hkezuf Ijut Maximum Pressing Force: 63 kN Maximum Retraction Force: 37 kN Maximum Stroke: 250 mm Maximum Working Pressure: 202 bar Installation Height: 500 mm Overtravel: 10 mm Overtravel Time: 54 ms Safety Distance: 140 mm Pickup at our Haldensleben location. Loading/transport is available as an option.

Condition: used, Year of construction: 1975, machine/vehicle number: 4005, Order No. 24330 Technical Specifications: - Asymmetrical roller arrangement, tiltable lower roller - Folding bearing for sheet removal - Max. working width 2040 mm - Max. sheet thickness approx. 2.5 mm - Roller diameter 137 mm - Working speed right + left 6 m/min - Motorized feed of the rear roller - Rear roller stroke approx. 80 mm - Emergency stop foot switch - Roller drive 3.5 kW - Feed drive power 2 kW - Space requirement approx. W 3200 x H 980 x D 900 mm Dehxzufjwhwz Uj Ieut - Weight approx. 1.5 t

Condition: reconditioned (used), type of input current: three-phase, input voltage: 400 V, welding current (max.): 385 A, Step-controlled MIG/MAG industrial machine Separate 4-roll wire feeder case Integrated control for secondary parameters such as wire feed Plug-in intermediate hose package Soft arc for extremely low-spatter welding of solid and flux-cored wires, for low- to high-alloy materials Oscillating piston pump for optimal cooling Euro-ZE for common torches Technical specifications: Line voltage: 400 V Current range: 40 to 385 A Min. open-circuit voltage: 17.4 - 19.2 V Max. open-circuit voltage: 41.6 - 45.4 V Application class: S Protection class: IP 21 Wire feed rate: 1.7 - 18 m/min Voltage steps: 24 Duohxswhwx Tszuf Ist Choke taps: 2 Duty cycle: 335 A at 35% 300 Amps at 60% 240 Amps at 100% Weight: approx. 163 kg Scope of delivery: 5 m power cable + 16 A plug, gas hose, short ignition lead, operating instructions

Condition: excellent (used), Year of manufacture: 2002 Overhaul: 2010 Type: CNC 607GK Control: Eckelmann (PC control) Operating hours: 14,136 h Table: 718 x 680 mm Dehxzowhwwiouf Iout Travel x-y-z: 780 – 620 – 360 mm Spindle mount: HSK 63F Speed: up to 24,000 rpm Feed rate: up to 8,000 mm/min Accessories: Spindle cooling Condition: Good Suitability: Machine is particularly suitable for light machining and for aluminum and wood Power supply: 20 kW Machine dimensions: 1,700 x 3,000 x 2,500 mm Weight: 1.6 t

Condition: used, Year of construction: 2000, Functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: OSP 700M, controller model: OKUMA, table width: 460 mm, table length: 1,000 mm, spindle speed (max.): 7,000 rpm, coolant supply: 10 bar, spindle motor power: 14 W, spindle nose: BT40, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, VERTICAL MACHINING CENTER OKUMA MX45VAE CNC OSP 700M SERIAL NUMBER 0093 YEAR 2000 ACCESSORIES INCLUDED: CHIP CONVEYOR AND COOLANT THROUGH SPINDLE 10 BARS. TECHNICAL DATA: Table dimensions: 460x1000 mm Longitudinal X-travel: 762 mm Duohxzsv Imw Touf Ist Cross Y-travel: 460 mm Vertical Z-travel: 450 mm Spindle nose: BT40 ISO Spindle speed: 7000 rpm. Motor power: 14 Kw Rapid X,Y,Z axis: 360000 mm/min Tool Stations: 20 no

Year of construction: 2015, Condition: excellent (used), Machining center with 4 CNC-controlled axes for machining profile bars or parts made of aluminum, PVC, non-ferrous metals, and steel up to 3 mm. Travel range X-axis up to approx. 4300 mm Y-axis up to approx. 270 mm Z-axis up to approx. 300 mm The profile turning device positions at -90°, 0°, and 90°, eliminating the need for angle heads for lateral machining and fully utilizing the spindle motor's performance range. Dujhxzuswhwplof Iet Minimum-quantity oil spray system 4 clamping elements 8-station tool changer HSK-63F tool holder USB port RJ45 network card Including the following options: Camplus software Shape software MG Pilot control panel Pneumatic reference stop on the right side

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, punching force: 25 t, Bruderer BSTA 250-75B, with BBV 190/85H -B-Control -Tool area 750mm -Adjustable stroke -complete documentation - Soundproof cabin - Machine checked, in very good condition! contact us! Dujhxzuswhwn Uof Iot

Condition: used, Year of construction: 1986, machine/vehicle number: 101862, Order No.: 25096 Technical Specifications: - Drilling capacity in ST 60 steel: 60 mm - Drilling capacity for counterboring: 70 mm - Thread cutting with right-hand and left-hand rotation - Drill spindle mount: MT 5 - Drill spindle stroke: 300 mm - Throat depth: 1600 mm - Extension stroke: 650 mm - Min./max. distance between spindle and base plate: approx. 600 - 1250 mm - Machined base plate clamping area: W 780 - D 1500 mm - Base plate / table height / foot height: 320 mm Dujhxzuswhwxyjf Ijt - 12 spindle speeds: 30 - 1330 rpm - 6 feed rates: 0.07 - 0.35 m/rev - Drill spindle drive: 400 V / 5.5 kW - Electric central clamping - 2 x cube tables: 750 x 570 x H 500 mm - Coolant system - Space requirement approx. W 1000 x H 2400 – 2900 x D 2450 mm - Weight approx. 4500 kg

Condition: reconditioned (used), TIP TIG – All-in-One No matter what welding task needs to be completed, the new TIP TIG All-in-One is ready for it. And much more. It's more powerful than its predecessor and yet incredibly easy to use. The completely redesigned wire feeder looks as impressive as it feels to weld with. TIP TIG All-in-One. Everything you expect from a modern welding system. Just a little, well, better. Features Dehxzowhwv Esuf Iout TIG cold wire and hot wire welding with dynamic wire feed system. Dynamic wire feed for a controllable weld pool, even in out-of-position welding. Up to 300% faster welding speeds compared to TIG welding. Up to 400% higher deposition rate. Reduction of dilution by up to 80%. High process reliability and reproducible welding results. Higher welding speed and ease of use. Heat input to the wire for improved deposition performance and an even lower risk of weld defects. Perfect weld appearance, no weld spatter. 4-roller drive for a maximum wire diameter (solid) of 1.2 mm. The All-in-One wire feeder can be used with any TIG welder. Line voltage 110/115/120V AC 220/230/240V AC Frequency 50Hz to 60Hz, single-phase Wire feed speed 0.15 to 17 m/min Dimensions (H x W x D) 525 mm x 352 mm x 600 mm Net weight 34 kg

Condition: good (used), Year of construction: 2002, Functionality: fully functional, total height: 3,600 mm, table height: 850 mm, installation height: 500 mm, total width: 1,200 mm, total length: 1,500 mm, throat depth: 250 mm, pressing force: 50 t, table width: 800 mm, table length: 500 mm, overall weight: 4,400 kg, Hydraulic C-frame press, capacity 50 to, table size 800x500 mm, stroke 500 mm, motor 22 kw, dimension 1200x1500x3600 mm, weight ca. 4500 kgs; 2-hand-operation, light-barrier-security Dehxzufot Ri A Te Ijut

Condition: used, Year of construction: 2006, Deckel Maho DMC-635V Vertical Machining Centre with Heidenhain iTNC 530 Control, Table Size 785 x 555mm, 20 Tool ATC, ACAT40 Spindle Taper, Spindle Speed Max 8000 U/min, Renishaw NC4 Tool Setting System with Renishaw TRS1 Eye, Manual. S/No. 1540501589A (2006) Djhswhwi Soxzuf Isut Location: This lot is located in Birmingham, UK. All/Any tooling is being offered as specifically described.

Condition: new, Year of construction: 2024, travel distance X-axis: 3,210 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 260 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 16 m/min, rotational speed (max.): 24,000 rpm, overall weight: 1,900 kg, number of spindles: 1, number of slots in tool magazine: 8, input voltage: 400 V, type of input current: AC, Equipment: rotational speed infinitely variable, I will sell a post-exhibition machining center from Yilmaz, model AIM 3410. The machine was shown at a trade fair. It has not yet been in production. Duehowhwd Nsxzuf Ijt 4-axis center 8-position magazine 7.5kW spindle HSK 63F tool holders automatic clamps deployed by the head tool set cooling system automatic lubrication system

Condition: excellent (used), Year of construction: 2010, operating hours: 3,112 h, Functionality: fully functional, machine/vehicle number: 305973, saw blade diameter: 400 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 400 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,200 m/min, rotational speed (max.): 3,200 rpm, cutting length (max.): 9,999 mm, outer dimension length: 2,340 mm, outer dimension width: 1,300 mm, saw drive: 4,000 W, Equipment: rotational speed infinitely variable, Kaltenbach KKS 400 NA – Automatic circular saw for precise metalworking (built in 2010) For sale is a Kaltenbach KKS 400 NA, a fully automatic circular saw for steel, stainless steel, and non-ferrous metals. The machine is in very good condition and has been used only rarely since its purchase. ✅ Condition & History: -Technically and visually in very good condition -Service receipts for the last maintenance are available -Hardly any operating hours since the last service -Ready for immediate use 🔧 Technical Highlights: -Saw blade diameter: 400 mm -Cutting range at 90° (round): up to Ø 130 mm -Miter cuts: automatic from 0° to 180° -Feed: NC-controlled feed gripper, max. cutting length 9,999 mm -Speed: up to 3,200 rpm -Feed speed (Z): up to 1,000 mm/min (rapid traverse up to 3,300 mm/min) -External dimensions: approx. 2,340 × 1,300 × 1,805 mm -Weight: approx. 1,700 kg NC control With remote diagnostics function → For easy programming, higher repeatability, and reduced setup times. Automatic material feed (1,000 mm stroke, max. 9,999 mm cutting length) → Ideal for serial cutting and long workpieces, significantly more efficient than manual feeds. Motorized miter adjustment (0°–180°) → Fast, precise bevel cuts without manual adjustment – tiltable to both sides. Continuously adjustable cutting speed (up to 43 m/min) → Optimal adaptation to the material and workpiece – better than the fixed speeds of older machines. Powerful 4.0 kW motor → Higher cutting performance even with thick-walled materials. Hydraulic clamping technology & economical lubrication → For clean cuts, less rework, and long tool life. Dohxzjwhwd Aeuf Ieut

Year of construction: 2004, Condition: good (used), 4-Hi CRM Rolling Mill Froehling Head Froehling is a very renowned brand for its reliability and robustness in the field of Rolling Mills, this 4-stage rolling mill allows precise and fast milling. Below are the features: Manufacture: - FROEHLING (Germany) - New 1969 - Upgrades 1984 and 2004 Material: - Aluminum alloys - copper - brass - low carbon steel Strip Width: - 282 (300) mm / 11.1" (11.8") Strip Thickness: - 0.15 - 1.20 mm commonly processed - 2.00 mm max thickness Coil Size: - ID - 400 mm (15.75") - OD - 1500 mm (59") Mill Speed: - 400 m/min (1312 fpm) Work Rolls: - Diameter - 130 mm (5.12") - Face - 340 mm (13.4") Back/up Rolls: - Diameter - 390 mm (5.12") - Face - 335 mm (13.4") Drive: - 250 kW ABB DC motors / converters - New 2004 Controls: - ABB PLC - Vollmer Automatic Gauge Control - Hydraulic AGC System - Bending system Completed with: - Uncoiler - Recoiler - Belt wrapper - unloading car - Hydraulic power units - Electrical control cabinets (2002) Many sets of work rollers and backup rollers as spare We have all electrical and mechanical drawings, Software key and everything needed to reassemble and restore the function of this machine. It was dismantled after have worked until last day. If you have any questions, please let us know Sold EXW dismantled and loaded on truck. Duohxzsg Ryqkeuf Ist Ready for any inspection from any customer interested in. SEND US YOUR PROPOSAL IF YOU ARE INTERESTED ON THIS MACHINE, WE WILL DO OUR BEST TO HAVE A GOOD BUSINNES TOGETHER.

Condition: new, Year of construction: 2024, Max Ø 114mm; Straight and bent round tubes; Dujhxzjt Eaw Douf Ijt One grinding station; Grinding of straight and bent round tubes up to Ø114mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval and elliptical tubes. The ML planetary belt system allows belt grinding without rotating the tube to deliver the best results. The feed system safely feeds the straight tubes into the grinding station for a consistent and productive surface finish. ML100 Working capacity (Ø mm) 3 - 114 No. of stations 1 Sanding belt, dimensions (mm) (2x) 50x940 Sanding belt speed (m/s) 3-22 Sanding belts Motor (kW) 3 Wheel, motor (kW) 1.5 Total power (kW) 4.5 Power consumption (A) 11 Dust extraction connection (Ø mm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 250

Condition: good (used), Year of construction: 1982, Capacity 13 mm, cutting length 3050 mm, mot. back gauge 1000 mm, 4 frontarms 1000 mm with scale, cutting angle adjustment, cutting gap adjustment, motor 22 kw, foot pedal Djhjizkm Eoxzuf Ijut

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, input current: 32 A, welding current (max.): 400 A, High-end welding machine with 5 meter hoose with jobmaster handle. Dohjwhwakoxzuf Ieut

Condition: used, Year of construction: 2011, operating hours: 30,700 h, Functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 450 mm, feed length Y-axis: 270 mm, feed length Z-axis: 310 mm, controller manufacturer: Siemens, spindle speed (min.): 15,000 rpm, operating hours of spindle: 30,700 h, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 24, Vertical CNC machining center FZ08K W Magnum Drilling capacity in St60 Ø 16 mm Tapping Ø 16 Milling capacity in St60 60 cm³/min Digital main drive with spindle Air-operated, with tool clamp monitoring 2.2 kW at 100% duty cycle 7.2 kW at 25% duty cycle Travel paths X = 450 mm X = 270 mm Z = 310 mm Tool changer Pick-up chain magazine 24 positions HSK-A 40 DIN 69893 Workpiece changing device 0/180° Clamping surface 2 x 660 x 350 mm With thread and locating holes M16 Ø15H7 Digital feed drive for X, Y, and Z axes With direct drives and Indirect absolute position measuring systems Siemens CNC 840D Windows XP Termocontrol Signal light Coolant system KF 150 / FKA 500 Connection 4x hydraulics / 2x pneumatics High-speed package Rapid traverse speed 70 m/min in the X, Y, and Z axes Acceleration 1.0 g in the X-axis – 1.5 g in the Y-axis – 2.0 g in the Z-axis Speed: 15,000 rpm Chip conveyor Rotary table package AWUP100 – 4th axis Dehjv U Um Aoxzuf Iout Measuring probe Renishaw OMP 40-2LS Scale package in all axes Extraction unit with air purifier

Condition: excellent (used), Year of construction: 2018, Serial Number : H300F3-00120 Z-axis measuring range : 350 mm X-axis measuring range : 300 mm Machine weight : 250 kg Mouse and USB computer display Turret table available. Multiple tool holders can be mounted on the table Dushxzjwhv Nwjuf Iet Machine was purchased new but never used. Very good condition, never used

Condition: excellent (used), Year of construction: 2016, 2016 Axe & Status Tuscan LD48 x 3000 Heavy Duty CNC Straight Bed Lathe With 'C' Axis, Driven Tooling & Fanuc Control Dujhxzuewhv Rujf Iot Fanuc (Guide i) Oi-TF Control. Bison Ø400mm 3 Jaw Manual Chuck. Swing Over Bed Ø1,220mm. Swing Over Cross Slide Ø625mm. Distance Between Centres 3,200mm. Spindle Bore Ø153mm. Axis Travel 'X'=650mm, 'Z'=3,000mm. Axis Rapid Traverse 'X'=6m/min, 'Z'=6m/min. Speed Range 9-600rpm (37kW Motor). 12 Position Duplomatic VDI-60 Turret. Tailstock Quill Ø165mm, Quill Travel 250mm, MT6 Taper. Turning Tool Shank 32 x 32mm. Low Cutting Hours Of 1,037. S/No. LD2448062. With Dual Chip Conveyors, Coolant System, Renishaw RMP60M Inspection Probe, Win Well MCA-15D Mist Extraction Unit, Quantity Of Assorted VDI 60 Turning & Driven Toolholders, (3) 3 Point Fixed Steadies, Taper Shank Fixed/Revolving Centres, Soft Jaws, Dual Derstrong Gyro-Posy Derdisc 200-A1 Spin Visual Windows, Handwheel, Signal Tower & Manuals. Machine Dimensions L 8,000 x W3,000 x H2,250mm. Approx. weight 15,400kg. Note: Machine Has Full Annual Service History.

Condition: new, Year of construction: 2025, total width: 2,000 mm, total height: 2,000 mm, total length: 1,620 mm, working width: 1,100 mm, overall weight: 1,000 kg, power: 12 kW (16.32 HP), nominal current: 20 A, sheet thickness (max.): 120 mm, sheet thickness steel (max.): 120 mm, Deburring up to 1100mm. Deburring of metal-cut parts up to 1100mm wide. DM1100 Z finishes and deburrs light metal sheets cut by laser, punching or shearing. This machine has a single wide belt station that can be used to deburr parts with a size of 50×50 mm and a width of up to 1100 mm. The DM1100 Z is also suitable for surface finishing, where it can be used with both standard sandpaper and non-woven/scotch belts. DM1100 Z Working capacity (mm) 1100x120 No. of belt stations (Z) 1 Sanding belt, dimensions (mm) 1100x1850 Sanding drum specifications Ø186mm Sanding belt speed (m/s) 8-22 Feed speed (m/min) 1.5-10 Sanding belt motor per head (kW) 11 Feed motor (kW) 0.18 Total power (kW) 12 Power consumption (A) 20 Rod suction connection per head (Ø mm) (1x) 152 Dshotzfpksxzuf Ieut Dimensions (mm) 1620x2000x2000 Weight (kg) 1000

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: R1SV01-BA2, Equipment: documentation/manual, Emco ET 420 / double spindle lathe Year of manufacture 2005 Siemens control Djhxowhv Itezuf Iout max. bar capacity 26 mm max. part length 600 mm 2 main spindles 2 counter spindles double bar magazine main spindle up to 5000 rpm C axis 0.01° 2 x 12-fold VDI 16 turret 4 driven tool stations / turret chip conveyor coolant device

Condition: refurbished (used), Year of construction: 2017, 2017 (Refurbished 2021) Unison Breeze 100 Single / Multistacking CNC Tube Bender Duehxswhv H Aezuf Ijt Bending Capacity Ø100 x 2.00mm. Bend Torque 30,000Nm. Servo Controlled Follower 180˚ at 30 CLR. Collet Capacity Ø100mm. Axis Maximum Speed / Feed 500mm/sec. Bend 70˚/sec. Rotation 360˚/sec. Maximum Stacks At Maximum OD = 3. Maximum Bend Radius =40mm. Maximum Bend Angle 200˚. Load Height 1,200mm. Maximum Tube Length 3,100mm. Maximum Tube Length Hitch = 5,700mm. Multi-radius Is Standard. Repeatability And Accuracy = Feed 0.05 / 0.10mm, Bend 0.05 / 0.10mm, Rotation 0.05 / 0.10˚. 480V 3PH. Full Load Current 94A. Approximate Machine Dimensions (W)8,000 x (D)2,000 x (H)2,300mm. S/No. 2792 (2017) 2792B (2021). NOTE: A loading charge of £250 + VAT will be added to the buyers invoice.

Condition: good (used), Year of construction: 2002, 2002 Nakamura-Tome TW-10 Twin Turret Twin Spindle Slant Bed Turning Center with Fanuc Series 18-T Control Dehjwhv E Sjxzuf Ijut Crawford Type D Collet Chuck Ø34mm Bore. SMW Autoblock Ø170mm 3 Jaw Power Sub-Chuck. Maximum Turning Ø180mm. Maximum Turning Length 154.9mm. 2 x 12 Station Turrets with 12 Rotating Tool Facility. Distance Between Centres 765mm. Maximum Spindle Speed 6,000rpm. Spindle Motor 5.5kW. S/No. W106301. Includes Turret Base Holders and Iscar Through Tool Grooving and Parting System. Grundfos CR2-220 25Bar High Pressure Coolant System. Renishaw NC1-TX Non-Contact Laser Tool Setting System. No Other Tools Included. Includes Spare Collets, Soft Jaws. Manuals and Software. Machine Weight 5.2 Tonnes. Machine (W)4,500 x (D)2,200 x (H)1,800mm. IEMCA KID 80 Automatic Barfeed System with Siemens Control. Feeding Rack 1,600 x 700mm. Bar Feed Dimensions (W)2,040 x (D)1,200 x (H)1,100mm.