Condition: used, Year of construction: 1972, turning length 2000 mm turning speeds 1400 U/min centre height 315 mm Dehxzsuap Uasiqajkl turning diameter 630 mm Including accessories (see pictures). The machine is in very good condition and has been well maintained. Only the rapid traverse should be checked.

Condition: good (used), Year of construction: 1995, Circulation/rotation Ø over bed 650 mm Circulation/rotation Ø over in the recess 680 mm Rotation/rotation Ø via cross slide 420 mm Turning length before chuck diameter 200 / 1500 / 2000 / 3000 mm longitudinal slide -travel 1050 / 1550 / 2050 / 3050 mm face slide travel 420 mm max. workpiece weight kg spindle head DIN 55026 Gr. A8 mit metr spindle bore 90 mm spindle diameter in front bearing 140 mm quill stroke 200 mm diameter of quill 100 mm taper in tailstock-quill MK 5 Djhswhf Eboxziqaekl max. chucking diameter 400 mm Largest turning tool cross-section 25x25 mm Feed force Z-axis 12500 N Feed force X-axis 9000 N Feed rate Z-axis mm/U Feed rate X-axis - mm/U rapid traverse Z-axis 7 m/min rapid traverse X-axis 5 m/min - Three-jaw chuck Ø315mm - 1x riding sock - 2x steady rest - Multifix inserts - 12x tool holder - 6x jaws with base holder

Condition: good (used), Year of construction: 2006, CNC lathe Daewoo Lynx 220 B CNC Fanuc 320 mm maximum cutting diameter, 510 mm stroke, 305 mm max. turned length, Djhxziqsvn Tu Ssaekl 51 mm bar capacity, 11 kW motor, Fanuc i-Series control,

Condition: excellent (used), Year of construction: 1989, Functionality: fully functional, Weiler Commodor 3-axis lathe with feed and spindle drive and digital readout from K&C, NEW, excellent condition! Technical specifications: >> Year of manufacture 1989 Machine no. 89-2633 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 45 to 2000 rpm >> Spindle bore 56 mm >> Short-taper spindle head DIN 55027 size 6 with bayonet lock >> Tailstock MT 4 >> Feed rates from 0.026 to 0.888 mm/rev >> Possible thread sizes: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 2000 kg Dkohowhd E Hsxziqaol >> Spindle brake can be switched on >> Drive power 7.5 kW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3 New K&C 3-axis digital readout, 12-month manufacturer's warranty with instruction manual. Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, 200-piece tool programming, taper calculation, radius/diameter, quick zeroing, counting direction reversal, >> New 200mm three-jaw chuck with 2 sets of jaws >> Multifix size B with 2 tool holders >> Electronic spindle protection >> Coolant system >> Multi-stop About the machine: Offered is a Weiler Commodor center lathe in very good condition. The machine is fully functional. The spindles run smoothly with little crank play. The machine has been completely disassembled and repainted. A very robust and powerful machine. The new 3-axis digital readout from K&C makes working even easier and more precise. The machine has undergone electrical and mechanical testing at our facility. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to view and test this machine live on-site.

Condition: used, Year of construction: 2012, travel distance X-axis: 830 mm, travel distance Z-axis: 180 mm, spindle speed (max.): 4,500 rpm, turning diameter: 150 mm, total height: 3,000 mm, overall weight: 15,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 DSL, number of spindles: 2, space requirement length: 4,300 mm, space requirement width: 2,550 mm, CONTROLS .. CNC controls SIEMENS SINUMERIK 840 DSL BASIC FUNCTIONS .. number of spindles: 2 .. number of turrets: 2 WORKING RANGE TURNING .. turning diameter (max): 150 mm MAIN SPINDLE .. spindle revolutions (max): 4500 /min X/Z SLIDE .. Z-axis travel: 180 mm .. X-axis travel: 830 mm .. traverse velocity Z (max): 3000 mm/min .. traverse velocity X (max): 60000 mm/min .. number of tool positions (total): 12 ELECTRICAL SPECIFICATIONS .. mains voltage: 24 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4300 mm .. space requirements -front/back-: 2550 mm .. total height: 3000 mm .. total weight approx.: 15000 kg ATTACHMENTS (TURNING) .. chip conveyor: yes .. band filtration unit: yes .. coolant through turret: yes .. through spindle coolant attachment: yes .. hydraulic system: yes Dehxziqov Uv Eteaekl .. European CE standards: yes Technology: Double spindle vertical turning center - 2 x main spindle (left + right) - max. chuck Ø 215mm - Knoll chip conveyor - Machine-centered feed belt with robot gripper

Condition: excellent (used), Year of construction: 1993, Center height: 250 mm Center width: 2000 mm Dehxziev Dhzfeqajkl Swing diameter: over bed 500 mm Spindle bore: 50.8 mm Spindle mount: size 6 Tailstock taper: 5 MK Spindle speeds: 22 - 2000 rpm Feeds: longitudinal/transverse 0.05-6.4/0.025-3.2 mm/rev Thread pitches: 80 - 1 mm Electrical connection: 380 V, 5.5 kW Space required: 3600 x 1100 x 1500 mm Weight: 1875 kg

Condition: used, Year of construction: 2001, Functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, PMER Lathe Type 430 Year 2001 Anilam 4200T CNC Video Available Complete Machine With Tooling Dkohxjv Uafdoziqael With Goggles With Documentation

Condition: like new (used), Year of construction: 2018, DOOSAN PUMA GT2600 M 3-axis CNC lathe. Year of construction 2018 "CE". With live tools. FANUC Numerical Control. Chip conveyor. LNS BARFEDEER QLS80 S2 loader Excellent conditions. Dshxzjwhbw Toiqajkl Datasheet attached.

Condition: good (used), Year of construction: 1996, CNC turning center with gantry loader . Dkehxzju Eug Ioiqasl TRAUB Type:TNC65 DG Year 1996 Control TRAUB TX8F Without lathe chuck With many accessories .

Condition: good (used), Year of construction: 2009, Max Turning diameter - 220 mm Turning length - 200 mm Turret positions - 2 X-Axis - 155 mm Z-Axis - 220 mm Spindle bore - 26 mm Speedrange - 6000 Rpm Spindle power - 11 kW Length - 1.410 mm Dehxziqewfb R Usaskl Width - 1.450 mm Height - 1.730 mm Weight - 2.350 kg CNC Brand - Fanuc CNC Model - Oi-TD

Condition: used, Year of construction: 2004, turning length: 850 mm, turning diameter: 600 mm, spindle speed (max.): 4,500 rpm, total height: 2,500 mm, overall weight: 11,000 kg, bar passage: 82 mm, bar diameter: 82 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, machining diameter: 600 mm, number of spindles: 2, space requirement length: 6,000 mm, space requirement width: 2,300 mm, CONTROLS .. CNC controls SIEMENS SINUMERIK 840 D Djhxzijv Uv Egjqaokl BASIC FUNCTIONS .. number of spindles: 2 .. number of x/z slides: 2 .. number of turrets: 2 .. live positions: yes .. number of c-axes: 2 WORKING RANGE TURNING .. swing diameter (max): 600 mm .. turning diameter (max): 290 mm .. bar diameter (max): 82 mm .. worpiece length max.: 850 mm MAIN SPINDLE .. spindle revolutions (max): 4500 /min .. spindle bore diameter: 65 mm .. c-axis: optional COUNTER SPINDLE .. spindle revolutions (max): 4500 /min .. c-axis: yes X/Z SLIDE .. tool fixture: Turret ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 6000 mm .. space requirements -front/back-: 2300 mm .. total height: 2500 mm .. total weight approx.: 11000 kg

Condition: used, Year of construction: 1967, Center height: 300 mm Center width: 1000 mm Swing diameter: over bed 610 mm Spindle bore: 71 mm Spindle mount: size 8 Dkehxzievzn E Soqael Tailstock taper: 5 MK Spindle speeds: approx. 11.2 - 1800 rpm Feeds: longitudinal/transverse 0.014-16/0.063-7 mm/rev Thread pitches: 0.1 - 112 mm Electrical connection: 380 V, approx. 5.5 kW Space required: 2900 x 1450 x 1750 mm

Condition: used, Year of construction: 2007, Functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Somab Lathe Type Deltamab 300 Year 2007 Dkehxzov Rfi Tjiqaol Siemens Sinumerik 840D CNC With Tooling With Tailstock With Chip Conveyor With Documentation

Condition: good (used), Year of construction: 2015, operating hours: 5,381 h, Functionality: fully functional, machine/vehicle number: AS0211, total height: 2,400 mm, total length: 4,500 mm, total width: 2,400 mm, overall weight: 9,000 kg, controller manufacturer: FANUC, controller model: SERIES 31 i-MODEL A, Equipment: documentation/manual, Technical specifications: - Operating voltage: 400 V - Frequency: 50–60 Hz - Rated current: 80 A - Control system: FANUC SERIES 31 i-MODEL A Travel ranges: - X1 / X2 axes: 180 mm each - Y1 axis: ±45 mm Dshxzov Uh Ndsiqajkl - Z1 axis: 704 mm - Z2 axis: 620 mm - E2 axis: 720 mm - Rapid traverse X/Y/Z axes: 30 m/min Spindle 1: - Max. speed: 5,000 rpm - Spindle nose: A6k - Spindle bore: 65 mm - Bore in clamping cylinder: 65 mm - Chuck diameter: 210 mm - Drive power: 24 kW Spindle 2: - Max. speed: 7,000 rpm - Spindle nose: Ø 110 mm - Spindle bore: 42 mm - Bore in clamping cylinder: 42 mm - Chuck diameter: 140 mm - Max. chuck jaw weight: 1.25 kg - Output power: 16.5 kW Tool carrier: - 1x 10-station tool turret - 1x 12-station tool turret - All stations driven (12 stations each) - Max. speed of driven tools: 8,000 rpm Accessories: - Chip conveyor from KNOLL - Tool holders (as shown in the photos, included)

Condition: new, The turning machines of the Turnado series are characterized by their robust construction, powerful motor and versatility. For more than 20 years they have been among the tried and tested bestsellers of our conventional lathes. The V models are also equipped with an extended, infinitely variable speed range. In combination with the position indicator and integrated function of the constant cutting speed, you achieve a superior surface quality when facing. A high-quality quick-change toolholder system also lessens non-productive time and costs. Djhxzsp At Trsiqaekl

Condition: excellent (used), Year of construction: 2020, Machine type: CNC machining center horizontal Manufacturer: DMGMORI Type: NHC4000 Commissioning: 2021 Control type: Mitsubishi M730BM Origin: Japan Storage location: Germany Delivery time: from stock Equipment Dkjhxswg Tw Aeziqajl Spindle speed 15,000 rpm, 30/18.5 kW - BT40 with face contact, pull stud: BT-90° - Internal coolant preparation - Chip conveyor - Automatic turning APC with 2 stations - Measuring probe (spindle) - Tool length measuring system - Mobile operator panel - B-axis 0.001° - Tool magazine for 60 tools - Coolant flushing gun with holder - Signal lamp 4 colors - Oil mist extraction interface - INTERLIT-TMF300/600 compact filter system 70 bar - Milling functions for pockets and islands - Fast canned cycles - 10 external M-codes - Increased 48 working coordinate pairs - Expansion of the part program memory to 1 MB with a maximum of 1,000 storable part programs Travel range X-axis approx. 560 mm Y-axis approx. 560 mm Z-axis approx. 660 mm Table 360° 0.001° Workpiece diameter approx. 630 mm Max. workpiece weight approx. 400 kg Max. speed approx. 15,000 rpm Spindle motor approx. 30/18.5 kW Number of tool positions approx. 60 Rapid traverse approx. 60 m/min Adapter taper BT40 Compressed air pressure bar, L/min approx. 5, 300 bar, L/min Power consumption approx. 37.3 kVA Footprint L x W x H approx. 2.70 x 4.20 x 2.54 m Machine weight approx. 7,600 kg This offer is subject to change and non-binding. (Subject to changes, errors, and prior sale)

Year of construction: 1999, Condition: excellent (used), Citizen M20-C CNC Swiss type lathe Technical Data Max. Machining Diameter: 20 mm Max. Machining Length: 320 mm / chuck Max. Drilling Diameter: 10 mm Max. Tapping Diameter: M8 Through-hole Diameters: 24 mm, 21 mm Spindle Speed: 200 - 8100 rpm Spindle Speed Change Steps: Steepless, S4-Digit Rotary Tool Max. Drilling Diameter: Gang Tool: 5 mm Turret: 5 mm Rotary Tool Max. Chucking Diameter: Gang Tool: 10 mm Turret: 7 mm Rotary Tool Max. Tapping Diameter: Turret: M5 Tool Spindle Speed: Gang Tool: 250 to 5000 rpm Turret: 320 to 6380 rpm Tool Spindle Speed Change Steps: Steepless, S4-Digit Back Spindle Max. Chuck Diameter: 20 mm Dkjhxziqoktfiajajl Max. Front Separate Length of a Back Machined Workipece: 125 mm Back Machining Max. Drilling Diameter: 8 mm Back Machining Max. Tapping Diameter: M8 Back Spindle Speed: 150 to 7200 rpm Back Spindle Speed Change Steps: Steepless, S4-Digit Number of Tools to be mounted Gang Tool: Cutting 5, Drilling: 3 (Total 8 tools) Turret: 10 Count of Turret Indexing: 10 Tool Holder: Gang Tool: Special M20 gang tool Turret: Ø 10- Ø 10 mm (Positioning Pin Type) Cutter Size: Gang Tool: 13 x 13 x 130 mm Turret: 10 x 10 x 60 mm Max. Diameter of Tool Mounted on Rotary Tool Holder: Gang Tool: Drill, End Mill: Ø 10 mm Turret; Drill, End Mill: Ø 7 mm Tap: M6 Slitting Cutter: 45 x 12.7 mm Rapid Feedrate X1 Axis: 15 m/min X2, Y1, Z1, Z2, Z3 Axes: 18 m/min A2 Axis: 200 rpm Least Input Increment: X1, X2, Y1 Axes: 0.001 mm Z1, Z2, Z3 Axes: 0.001 mm A2 Axis: 0.001 deg. Spindle Indexing: 0.001 ° Center Height: 1070 mm Motors: Spindle Motor: 2,2 / 3,7 kW Back Spindle: 0,75 / 1,5 kW Gang Tool: 0,4 kW Turret: 0,4 kW Y1, A2 Axes Feed Motor: 0.3 kW x 2 X2, Y1, Z1, Z2, Z3 Axes: 0.5 kW x 5 Hydraulic Motor: 0,4 kW Coolant Motor: 0,25 kW Lubricant Motor: 0,004 kW Input Power Capacity: 14 KVA Required Floor Space: 1100 x 2540 x 1700 mm Weight: 2500 kg We do not take any responsibility for the correctness, completeness and topicality of the information.

Condition: used, Year of construction: 2017, turning diameter 290 mm turning length 204 mm control Fanuc 31i - Model B Number of working hours 5149 + 4185 h number of spindles 2 Stück spindle turning speed range max. 3200 U/min x-travel 230 mm z-travel 250 mm distance between the spindle noses 450 mm spindle nose A 2 - 6 spindle bore 73 mm tool turret with 10 work positions 2 x workpiece magazin 14 Stück max. workpiece diameter 200 mm workpiece weight max. 2 x 8 kg workpiece length - max. 120 mm rapid traverse 24 m/min feed - longitudinal/cross 0 - 1260 mm/min Djhxziov Rrrheqajkl spindle motor 11/15 kW Driven tools 3,7/5,5 kW turning speed of the driven tools 4000 U/min. total power requirement 61 kVA weight of the machine ca. 6,3 t dimensions of the machine ca. 3,1 x 2,9 x 3,6 mm Front lathe - Horizontal double spindle machine with gantry loader Raku Raku and workpiece magazine on both sides, C-axis and 10-way turret for both sides with driven tools on just the right side, 14-way workpiece pallet magazine. Machine dealer with own stock of 1600 m².

Condition: new, The turning machines of the Turnado series are characterized by their robust construction, powerful motor and versatility. For more than 20 years they have been among the tried and tested bestsellers of our conventional lathes. The V models are also equipped with an extended, infinitely variable speed range. In combination with the position indicator and integrated function of the constant cutting speed, you achieve a superior surface quality when facing. A high-quality quick-change toolholder system also lessens non-productive time and costs. Dkjhsp At Tnjxziqasl

Condition: excellent (used), Machine type: CNC turning center Model: CLX550V4 Manufacturer: DMGMORI Control: SLIMline® Multi-Touch Contr./Fanuc Year of manufacture: 2019 Location: Germany Turning diameter max. approx. 425mm Standard turning diameter approx. 315mm Chuck size approx. 300mm Turning length approx. 1240mm Bar diameter max. approx. 100mm Dehxswg Twvjziqajkl Turret stations 12 X-axis approx. 307mm Z-axis approx. 1,240mm Y-axis approx. 120 (+-60)mm Tailstock approx. 1,200 mm Spindle speed max. approx. 3,250 rpm AGW speed max. approx. 4,000 rpm Rapid traverse X/Z approx. 30 m/min Rapid traverse Y approx. 22.5 m/min Main spindle 22/33kW • 3-jaw chuck D 315mm • Robot interface • 12 station turret VDI 40 • Tool drive for all stations • C-axis • Y-axis • Chip conveyor • Coolant pump 8/20 bar • 4-way indicator light • Automation package • Automatic sliding hood, electric • Connection piece for oil mist separator • Electric handwheel • Y-axis • Preparation for steady rest (Errors in the technical data and information reserved)

Year of construction: 2003, Condition: excellent (used), Citizen M32 V CNC automatic lathe Max. Machining diameter: 32 mm Max. Machining length: 320 mm per chuck Max. Diameter for frontal drilling: 12 mm Max. Diameter for frontal tapping: M10 Diameter of spindle passage: 36 mm Main spindle speed: 200 - 8000 rpm Change of main spindle speed: digits S + 4 without graduation Step feed of the main spindle: 1°. C-axis of the main spindle: 0,001°. Max. Clamping diameter of counter spindle: 32 mm Max. Length of the part to the front during backward machining: 145 mm Max. Protrusion of the parts from the counter spindle: 65 mm Max. Drilling diameter in backward machining: 10 mm Max. Max. threading diameter in backworking process: M8 Counter spindle speed: 200 - 7000 rpm Graduated speed change, counter spindle: digits S + 4 without graduation Graduated feed rate, counter spindle: 1°. C axis of the counter spindle: 0.001°. Tool spindle of tool holder 1 Dohxzisktffdoqaekl Max. Drilling diameter: 7 mm Max. Max. thread diameter: M8 Spindle speed, stepless: From 200 - 5000 rpm Tool spindle from tool holder 2 Max. Drilling diameter: 10 mm Max. Max. thread diameter: M8 Spindle speed, stepless: From 200 - 5000 rpm Tool spindle of the counter spindle tool holder Max. Drilling diameter: 7 mm Max. Max. thread diameter: M6 Spindle speed, stepless: From 200 - 5000 rpm Count of step feed for turret station: 20 Number of mountable tools: Up to 21 tools Rotary chisel in tool holder 1: 5 tools Driven tools in tool holder 1: 4 tools Tools in tool holder 2: 3 tools Tool holder for turret tool holder: Ø36-Ø12 (positioning pins) Tool dimension tool, tool holder 1: 16 x 16 x 130 mm Tool, tool holder 2: 16 x 16 x 90 mm Sleeve (tool holder 2): Ø 25.4 mm Sleeve (counter spindle tool holder): Ø 25.4 mm Max. Diameter of the tool clamped in the holder for driven tools (in tool holder 1): Ø 10 mm Max. Diameter of the tool clamped in the holder for driven tools (in tool holder 2): Ø 10 mm / Ø 60 x Ø 15.875 Ø 63 x Ø 16 Ø 60 x Ø 25.40 / Ø 63 x Ø 22 Ø 32 x Ø 10 / Ø 80 x Ø 15.875 Rapid traverse X1, Y1, Z1: 20 m/min X2, Z2: 20 m/min Y2: 8 m/min X3, Z3: 20 m/min Smallest increment X1, Y1, Z1: 0.001 mm X2, Y2, Z2: 0.001 mm X3, Z3: 0.001 mm Axis stroke X1: 108 mm Y1: 275 mm Z1: 325 mm X2: 120 mm Y2: 44 mm Z2: 202 mm X3: 238 mm Z3: 410 mm Bar length: 2500 mm Central height: 1132 mm Motors 2,2 / 3,7 kW 3,7 / 5,5 kW For control of guide bush: 0,75 / 1,5 kW For control of counter spindle: 0,75 / 1,5 kW For tool spindle of tool holder 1: 1 kW For tool spindle of tool holder 2: 0,75 / 1,5 kW For tool spindle of counter spindle tool holder: 0,75 kW X1: 0.4 kW Y1: 0,75 kW Z1: 0,75 kW X2: 1 kW Y2: 0.75 kW Z2: 0,75 kW X3: 0,75 kW Z3: 0,75 kW T1: 1 kW For main spindle chuck: 0,2 kW For counter spindle chuck: 0,2 kW For the extractor: 0,2 kW For unloading the products from the machine: 0,2 kW For the coolant: 0,4 kW For the lubricating oil: 0,004 kW Dimensions: 2770 x 1370 x 1820 mm Weight: 3100 kg For the correctness, completeness and topicality of the data we do not take over guarantee

Condition: excellent (used), Year of construction: 2021, Machine type: CNC turning and milling center Model: CLX 750 V3 Manufacturer: DMGMORI Control: SLIMllne® Multi-Touch Control Siemens Year of manufacture: 2021 Location: Germany Equipment - Main spindle A2-11" with AC motor, 36/46 kW (100/40%), 2,000 min-¹ Dkehxziqowg Twijael - 3-jaw chuck 300mm - Partial hollow clamping device for the main spindle 127mm - Chuck flushing for the main spindle - 12-way servo tool turret holder VDI 50, - 12 driven tool stations - Direct position measuring system X - Hydraulically movable tailstock via M function - Interface for robots - Automatic door - External electronic handwheel - Signal lamp 4 colors - 8 / 20 bar / coolant system 600l tank with Belt filter - Coolant spray gun, 5 bar - Chip conveyor scraper belt - Foot control pedal for tailstock - Mechanical preparation for extraction

Condition: excellent (used), STAR SR-20R sliding headstock automatic lathe TECHNICAL DATA Spindle diameter: 20 mm turning length: 205 mm Speed range - spindle: 500 - 12,000 rpm Drive power, spindle motor: 2.2 / 3.7 kW Travel X: 265 mm Speed range, counter spindle: 500 - 8000 rpm Drive power, counter spindle motor: 1.5 / 2.2 kW C-axis: 0.001° 19 tool positions: Linear tool holder, front attachment, rear machining SCOPE OF OFFER Dkehxou Hkh Roziqaol U.A: (list not exhaustive): STAR SR-20R sliding headstock automatic lathe LNS bar loader transformer Coolant tray Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and timeliness of the information

Condition: excellent (used), Year of construction: 2022, spindle speed (min.): 12,000 rpm, Machine type: CNC-BAZ Vertical Model: M1 Plus Manufacturer: DMGMORI Control: Siemens 828 D Year of manufacture: 2022 Location: Germany Technical data Travel range X-axis approx. 550 mm Y-axis approx. 550 mm Z-axis approx. 510 mm Table size approx. 850 x 650 mm Max. workpiece weight approx. 600 kg Equipment Dehxziqewg Txgjajkl - Main spindle 10,000 rpm 13/9 kW - 24-place chain magazine - SK40 - Chip conveyor - Renishaw measuring probe - Coolant spray gun Footprint L x W x H approx. 3.1 x 2.7 x 2.9 m Machine weight approx. 5,600 kg (Errors in the technical data and information excepted)

Condition: excellent (used), Year of construction: 2013, Traub TNL 18-7B CNC Automatic Lathe Base machine: 2441 x 1396 mm Weight: 3800 kg Spindle height above floor: 3800 mm Connected power: 24 kW Main spindle Max. bar capacity: 18 mm Max. speed: 12,000 rpm Cross-cut speed: 5,000 rpm Z stroke: 205 mm Rapid traverse: 40 m/min Z measuring system resolution: 0.001 mm Feed force: 3000 N Spindle head / short taper: Traub short taper mount Max. clamping force: 1400 daN Max. clamping pressure: 40 bar Min. clamping pressure: 7.5 bar Piston area: 40 cm2 Total cylinder travel: 5 mm Clamping tube thread: M25 X 1 Counter spindle Workpiece diameter: 21 mm Workpiece clamping depth: 180 mm Max. speed: 12,000 rpm Dkjhxzjwg Takoiqaol Strokes: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. clamping pressure: 30 bar Min. clamping pressure: 10 bar Top tool turret with B-axis Number of stations: 8 Shank cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower tool turret Number of stations: 7 + counter spindle Shaft cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Tool drive for upper tool turret Number of driven stations: Max. 8 Drive power: 2 kW Max. speed: 12,000 rpm Torque: 3.9 Nm Tool drive for lower tool turret Number of driven stations: 7 + counter spindle Drive power: 3.4 kW Max. speed: 12,000 rpm Torque: 7.3 Nm Tool drive for the rear unit Number of stations: 7 Number of driven stations: max. 3 Pitch spacing: 46 mm Drive power: 2 kW Max. speed: 7,500 rpm Torque: 4.7 Nm Drive power: 2 kW Max. speed: 4,000 rpm Torque: 11.8 SCOPE OF OFFER INCLUDES (list is not exhaustive): Traub CNC lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire extinguishing system Chip conveyor Bar loader Operational documentation For the exact scope of offer, see the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.