Condition: ready for operation (used), Functionality: fully functional, turning diameter over cross slide: 550 mm, spindle bore: 77 mm, turning diameter over bed slide: 800 mm, GURUTZPE lathe model Super AT 400/6000, 6,000 mm between points, turning on bed 820 mm, on carriage 550 mm, shaft diameter 76,5 mm, 16 speeds from 9-500rpm, has fixed rear Steady , , has 4 independent claws chuck diameter 800mm, , very good condition in general Fobvcuswd D Itolnjgb

Condition: excellent (used), Pull down jaws (28370) Make Hilma type BZT 160 Fgjbvelrp N Heculneb 3722-04 well suited for bright drawn material weight 3,5 kg

Condition: like new (used), Year of construction: 2005, Cazeneuve CNC Lathe Model OPTIMAX 360 Year 2005 Fgebowb Uk Hevculneb Turning length 610 mm Turning diameter 360 mm Bed diameter 360 mm Slide diameter 200 mm Center distance 610 mm X axis 180 mm Z axis 610 mm Spindle nose MT 6 Spindle bore 54 mm Number of turrets - 1 Number of tools - 8 VDI 20 turret Selection of turning tools 16 x 16 mm Boring bar diameter 25 mm Rotation speed 4200 rpm Spindle motor capacity 7.5 kW Dimensions: 1950 x 1320 x 1640 mm Weight 2100 kg

Condition: used, Year of construction: 1999, Technical details: turning diameter: 570 mm turning length: 3000 mm tailstock-quill conus: MK 5 spindle head: 8 nach DIN 55027 spindle bore diameter: 62 mm speeds station 1: 3 - 500 U/min speeds station 2: 15 - 2500 U/min Feed speed: längs max. 10 m / plan max 5m m/min. weight of the machine ca.: 6,4 t main drive DC: 20/30 kW : 35 kw Fobvjwdwi Djculnjgb dimensions of the machine ca.: 5,83 m x 2,10 m x 1,98 m m Main drive - Siemens speed 8000/min Feed drive X - Siemens speed 3000/min Feed drive Z - Siemens speed 3000/min Coolant pump - Brinkmann speed 2700/min Lubrication pump - Vogel speed 1370/min Coolant 47 l/min. 0.2 bar Noise level according to DIN 45635 - Part 16 80db Coolant pump Main spindle brake Top support with Haase quick-change steel holder Setting vice fixed diameter 20 - 315 mm Moving headstock diameter 25 - 160 mm *

Condition: excellent (used), Year of construction: 2014, operating hours: 10,600 h, Functionality: fully functional, turning length: 3,000 mm, turning diameter: 670 mm, This second hand INTEGREX model "e-420 H-S II"i s a Multi-Tasking Machining Center and a complete fusion of CNC turning center and machining center, forming one of the best and most advanced multi tasking machine in the industry. Complete all operations in a single setup – turning, milling, boring, drilling, part transfer from spindle 1 to spindle 2 and more with Mazak's Done-In-One capability. The machine delivers precision and performance for heavy, large-diameter, shaft-type workpieces within a wide range of industry applications. This machine was barely used in a company that recently filed for bankruptcy in 2024. The former owner from Poland was active in the general machining as third party contract manufacturer. The entire factory will shut down within the next few months. The company had just been purchased in 2025 by an investor who will delete the entire manufacturing operation and transform the building for new purposes. General Discription Milling spindle travel -30 ~ 210 degrees (.0001 degree min index angle) Available 2.5k 40HP 5.2” spindle Bore (option) Identical second spindle for Done-In-One part processing Full C-axis contouring (.0001 degree minimum index) Available 80 or 120 automatic tool changer options available Fsbvjv H Rtceculnjgb Machine Specifications CNC control: Mazatrol Matrix 2 Distance between centers: 3000 mm Max turning diameter: 670 mm Max machined length: 3000 mm Max workpiece weight: 880 kg Max chuck speed: 2500 rpm Automatic tool changer: 40 tools Spindle motor power: 22 kW Motor power of the milling unit: 15-22 kW Milling spindle: 12000 rpm Indexation: 0.0001° X/Y/Z axis travel path: 845 / 420 / 3013 mm Rapid traverse in X/Y/Z axis: 50 / 50 / 40 m/min High-pressure cooling through the center of the tool: 70 bar Operating hours: 10600 h

Condition: used, Year of construction: 2005, Functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 565 mm, turning diameter: 560 mm, spindle speed (min.): 25 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 79 mm, feed rate Y-axis: 80 m/min, chuck outer diameter: 68 mm, overall weight: 7,000 kg, spindle diameter: 250 mm, Equipment: documentation/manual, Y-AXIS LIVE TOOLS Fsbvculsr I Abxonjgb CNC HEIDENHAIN Max turning length 600 mm Max turning diameter 560 mm Max turning diameter (over the slide) 565 mm Max turning diameter (over the bed) 680 mm Number of live tools 12 pcs. Max speed of live tools 4500 rpm. Feed rate on Y axis 80 mm (+40/-40 mm) Distance between axes 635 mm Max spindle diameter 250 mm Spindle speed range 25-5000rpm. Max power of the spindle 35 kW Max torque of the spindle 370 Nm Max spindle diameter 68 mm Spindle bore 79 mm Machine dimensions approx. (LxWxH) 3500x2350x3500 mm Machine weight approx. 7000 kgs EQUIPPED WITH: -Chip conveyor -Y axis -Rest -Tailstock USED MACHINE

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, spindle bore: 80 mm, turning length: 2,000 mm, turning diameter over bed slide: 620 mm, swing diameter over cross slide: 415 mm, Pinacho lathe with Fanuc semi-control model Smart Turn 5 310 with 2000mm between points, diameter over bed 620mm, diameter over cross slide 415mm, quill hole 80mm, 12 speeds divided into three speed ranges 0-240rpm/240-630 rpm, 630-1700 rpm main motor motor 7,5Kw, working feeds Z, X 0-5000m/min, year 2005, in VERY good condition. Fobvswd D Hieculnjgb

Condition: used, Year of construction: 2004, Mazatrol 640 MT Pro Control Type: Mazatrol 640 MT Pro Captiva C6 Swing: 851 mm Febvcswdw Hcsulnsgb Turning Diameter: 760 mm Center Distance: 1500 mm Bar Capacity: 88 mm X-Axis Movement: 630 mm Y-Axis Movement: 230 mm Z-Axis Movement: 1585 mm B-Axis Spindle Tilt: 225° CTS 15 Bar C-Axis Index Increment: 0.001° W-Axis Movement: 1050 mm Main Engine: 30 HP Sub Spindle Speed: 4,000 rpm Sub Spindle Motor (HP): 25/20 HP Live Tool Speed: 12,000 rpm ATC: 40 tools in magazine

Condition: good (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 021902SA04, overall weight: 1,350 kg, Equipment: documentation/manual, The highly flexible Master 80 HF allows changeover in just 1 minute for round and polygonal profiles from 15 to 80 mm in diameter. Thanks to its innovative structure, the MASTER 80 HF can process bars from 15 to 80 mm in diameter in a single channel. The material support adjustment is automatic. The use of the front centering device allows optimal use of the loading magazine with any type of bar material, both hexagonal and square. The material pusher, which is heavier and more stable than the previous version, is radially clamped and locked by pairs of rollers. This, along with additional stabilization of the loading magazine, ensures the processing of bars from 15 to 80 mm in diameter. High Rigidity The thorough research and structural design of the Master resulted in a product with extreme torsional and longitudinal rigidity, eliminating any vibration. Front Bushing Fgebvculewdwt Asnjb The front guide bushing also guides the bar between the loading magazine and the lathe, eliminating any vibration. Replacing the two half bushings takes less than 30 seconds. Axial Shifting Device The loading magazine features an axial shifting device that allows easy access to the lathe.

Condition: used, Year of construction: 2006, Technical details: turning diameter: 145 mm turning length: 210 mm total power requirement: 40 kW swing diameter: 145 mm Spindle bore sp. 1: 56 mm Spindle bore sp. 2: 56 mm swing diameter over face slide: 145 mm greates pass round over bed: 145 mm RPM Main Spindle: 7.000 1/min number of workpiece supports: 12 Shank diameter: 25 mm C-axis RPM: 2.000 1/min Chuck diameter spindle 1: 140 mm Chuck diameter Spindle 2: 140 mm Number of tools: 12 fach St. Tool bore: VDI 25 Shank diameter: 25 mm weight of the machine ca.: 5.300 kg dimensions of the machine ca.: 5.000 x 4.100 x 2.050 mm Slide path flat: X1, X2, X3: 220mm, 120mm ( 145mm ) Longitudinal slide travel: Z1, Z2, Z3: 320mm, 345mm, 380mm Vertical slide travel Y1: +/- 30mm Longitudinal spindle travel Z3: 380mm Clamping tube inner draw tube 46mm diameter Speed range main drive 1+2 up to 7,000 rpm Speed of driven tools up to 6,000 rpm Main and counter spindle collet chuck 1 axial driven tool 1 radial tool Belt filter system Loading magazine FMB Turbo 10-72 XT * Fjbvcjwdv U Ssulnjgb

Condition: reconditioned (used), Year of construction: 1995, Functionality: fully functional, turning diameter over cross slide: 650 mm, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 3,000 mm, total length: 5,500 mm, total width: 1,500 mm, total height: 1,500 mm, overall weight: 10,500 kg, workpiece weight (max.): 6,000 kg, spindle mount: MK 6, Used universal lathe PORĘBA TRP-93/3M, year of manufacture 1995, has been inspected and externally overhauled by us. The delivery includes a steady rest with a diameter of 450 mm and a 4-jaw lathe chuck with a diameter of 800 mm. Availability: the machine is available immediately, under power, technical inspection at any time Technical data: - Distance between centers/turning length: 3000 mm - Turning diameter over bed: 930 mm - Turning diameter over support: 650 mm - Turning diameter in the bridge recess: 1150 mm - Spindle bore diameter: 95 mm - Maximum workpiece weight between centers: 6000 kg - Maximum workpiece weight between centers + 1 steady rest: 7600 kg - Maximum workpiece weight between centers + 2 steady rests: 9200 kg - Number of spindle speeds: 21 - Speed ​​range (rpm): 5 - 800 - Motor power [kW]: 17/27 (gear 1/gear 2) Fjbvculewdv Rmonogb - Overall dimensions: - Total length: 5500 mm - Width: 1500 mm - Height: 1500 mm - Total weight: 10,500 kg Additional equipment included in the scope of delivery: - 1 x steady rest with a diameter of 450 mm - 1 x 4-jaw chuck with a diameter of 800 mm.

Condition: good (used), Year of construction: 2008, Description: Takisawa Manufacturer: Takisawa Type: EX-310 Turning length approx. 500 mm. Rotation diameter: approx. 260 mm. Equipment: Fgobvstrd Srjculnjb Control: Fanuc 21i-TB Bar loader for bar length 1.5 m Tailstock Turret with 12 tool stations and driven tools. Three-jaw chuck Ø 250 mm.

Condition: ready for operation (used), Functionality: fully functional, spindle bore: 80 mm, turning diameter over bed slide: 620 mm, Pinacho Lathe mod S90 310 x 3150mm e.p , with Fagor dimension display, diameter admitted on bed 620mm, on neck 850mm, on transverse carriage 415mm, shaft hole 80mm, speeds 30-1500rpm, bed width 350mm, 7.5hp motor, with protections, in good condition Febvculowd D Akjnogb

Condition: used, Year of construction: 2007, Technical Specifications: Mazatrol Matrix X-Axis Movement: 630 mm Y-Axis Movement: 230 mm Z-Axis Movement: 1610 mm Max Turning Length: 1496 mm Max Turning Diameter: 660 mm Spindle Speed: 3000 rpm Number of Tools: 40 pcs, Revolver 9 pcs. Type of Tool Holder: Capto C6 Engine Power: 25 - 30 kW Conveyor: ConSep 2000-II 70 bar pump for coolant. Robot interface Renishaw MP-10 Dimensions: Length: 5100 mm Width: 2900 mm Fgjbvculswdwvwonsb Height: 2798 mm

Condition: excellent (used), Year of construction: 2021, operating hours: 5,800 h, Functionality: fully functional, machine/vehicle number: A320A/2935, Accessories: Fgjbvewdukreculnob Documentation Various tool holders, clamping sleeves, etc. MH 500 chip conveyor Coolant system with high-pressure pump CO2 fire extinguishing system Parts catcher Signal lamp Counter spindle Interface for bar loader FMB minimag 20 / 3200 "C" bar loader C-axis Hydraulic unit Collet chuck Available from approximately July-August 2025

Condition: excellent (used), Year of construction: 1983, Functionality: fully functional, Weiler Center Lathe Model Condor 81 Lead and Feed Lathe with 3-Axis Digital Readout from K&C NEW Technical Specifications: >> Year of Manufacture 1983 Machine No. 83-067 >> Center height 165 mm >> Center width 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feed rates from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be switched on >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Equipment: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating instructions Functions: mm/inch switching, ABS/INC coordinate selection, halving of the display value, reference mark, 200 tool programming, cone calculation, radius/diameter, quick zeroing, counting direction switching >> 1 new three-jaw chuck, 160 mm, 2 sets of jaws >> New collet chuck and new collets from 3 to 26 mm, 1 mm increments >> Multifix size B with 3 tool holders >> Electronic spindle protection >> Rear panel >> Coolant system >> Machine feet Fgjbvcjwb Supoulnsb About the machine: Offered is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital readout from K&C makes work even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was also performed. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to view and try out this machine live on-site.

Condition: new, Year of construction: 2025, Attention - Promotion!! Completely free first warranty inspection - special offer only for Customers who took part in the show before purchase - at the Otinus machine showroom in Bydgoszcz. CNC lathe HLC-4055 on Fanuc 0i TF control Machining range: - Max. turning diameter over bed: Φ 560 mm - Max. turning diameter over support: Φ 320 mm - Max. turning diameter: Φ 400 mm - Max. turning length: 548 mm - Distance from spindle center to ground: 980 mm - Travel range in X axis: 210 mm - Travel range in Z axis: 610 mm Tool head: - Turret type: Hydraulic V12 - Outer dimension: 25x25 mm - Inner diameter: Φ 40 mm - Indexing time: Φ 0.55 s Spindle: - Drive type: Belt transmission - Maximum spindle speed: 4500 o/min - Power consumption - 15 min: 11/15 kW - Torque - 15 min: 140/250 Nm - Spindle nose: JISA2-6 - Spindle through hole: Φ 76 mm - Maximum workpiece diameter: Φ 50 mm - Spindle front bearing diameter: Φ 100 mm - Spindle diameter: 208 mm Fgsbvewdt Szeculnjb Feed speed: - Rapid traverse X: 24 m/min - Rapid traverse Z: 30 m/min - Servo motor power X/Z: 1.8/1.8 kW Tailstock: - Tailstock quill diameter: Φ 100 mm - Centering type: MT NO.4 - Quill stroke: 120 mm - Travel range: 410 mm Other parameters: - Control: FANUC - Power supply: 25 kVA - Coolant tank volume: 200 l - Machine weight: 4.5 t - Dimensions [length × width × height]: 4200×2050×1850 mm

Condition: good (used), Year of construction: 2001, Functionality: fully functional, Description Control system: Fanuc 21i-T Circulation diameter (max.): 260 mm Chuck diameter (max.): 250 mm Motor spindle speed: 4,500 rpm Fjbvculjtq Tnusnegb Clamping cylinder: Full clamping cylinder Tool carrier: 12-position disk turret without lifetool Tool holder: VDI 40 Workpiece feed: Workpiece circulation belt with drag frame. Chip conveyor: Hinged belt conveyor.

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 400 mm turning dia. over face-slide: 400 mm turning length: 1155 mm max. turning diameter: Ø 350 mm travel -x axis: 205 mm travel -z axis: 620 mm control: Fanuc OI-TC max. tool weight: 235 (with Tailstock) kg spindle passage: Ø 80 mm revolution per minute: steples U/min rapid traverse X-axis: 20 m/min Fobvculov Iplaensgb rapid traverse Z-axis: 24 m/min tool turret - number of stations: 12 tailstock taper ISO: MK 4 mm tailstock quill stroke: 150 mm total power requirement: 45 kVA Weight approx.: 4,0 t dimension machine xH: 2,6 x 1,8 x 2,2 + Transformator m Equipment: -3-jaw chuck Ø 260mm with interchangeable jaws inside/outside -center point in tailstock -disk turret Ø 480mm -Hydraulic unit (40 liter capacity) -Coolant tray (80kg) -LOSMA exhaust air filter -Chip tray (30kg) -Chip conveyor (180kg) Operation via control panel and foot switch Accessories various bar sleeves Ø 78mm (outside) various clamping rods 1x 4-jaw lathe chuck Ø 200mm TOS various clamping jaws various clamping fixtures *

Condition: used, Year of construction: 2007, Max. turning Ø: 660mm X-Axis: 580mm Y-axis: 160mm Z-Axis: 1545mm B-Axis: 270° Spindle bore: 65mm Subspindle bore: 65mm Subspindle power: 18.5kW Speed range: 5000Rpm Spindle power: 22kW Fgebvcjwdwm Njulneb ATC 40pcs Revolver 9pcs B-Axis Tool System: Capto C6 B-Axis Speed Range: 12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm

Condition: repair required (used), Year of construction: 2003, operating hours: 34,343 h, Functionality: limited functionality, machine/vehicle number: 938378, turning diameter over cross slide: 210 mm, turning length: 580 mm, turning diameter: 210 mm, spindle bore: 51 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 455 mm, spindle motor power: 7,500 W, bar diameter: 51 mm, The device is mechanically in good condition. All components are working. The problem with the turret - controls tools but does not lock them. All other functions work fine. Fjbvculeulvtusnsgb

Condition: used, turning diameter: 560 mm, center width: 2,000 mm, spindle speed (max.): 1,800 rpm, bed width: 432 mm, overall weight: 4,000 kg, three-jaw chuck diameter: 315 mm, Used universal lathe FAT Poland Model: TUR 560 x 2000 three-jaw chuck' Digital readout 2 axes Multifix Fjbvcueuqw Nbelnogb center

Condition: good (used), Year of construction: 1998, Emag VSC 200 with workpiece conveyor and chip conveyor. The main spindle bearings were replaced in 2005. Control: Siemens 840D Fjbvculjtq Ifnsnjgb Turning diameter: Ø 260 mm. Turning length: approx. 200 mm. Machine dimensions: Length: 3,200 mm, width: 1,800 mm, height: approx. 2,650 mm. Machine weight: approx. 6,500 kg. The machine was only used in 1-2 shift operation.

Condition: used, Year of construction: 2001, Functionality: fully functional, input voltage: 400 V, We offer 4 pieces Emag VL 3 for sale. Three machines with Lifetool. One machine without Lifetool. Year of construction of the machines 2000-2001 Fgjbotrdlaevculnsb General description: Manufacturer: Emag Machine type: VL3 Technical data: Control: Fanuc 21i-T and Fanuc 18i-T Rotation diameter: approx. 210 mm Maximum speed 6,500 1/min Turret: VDI 40 mm, 12 stations Hinged belt chip conveyor Spindle holder: GR. 5 Circulating parts conveyor. Machine weight: approx. 5.5 t A used three-jaw chuck is included with every machine. The description is non-binding and should be checked during an inspection.

Condition: reconditioned (used), Year of construction: 2001, Functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, ATTENTION: THIS MACHINE AT A ONE-TIME SPECIAL PRICE. General description: Year of construction: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical Data: Control: Fanuc 21i-T Rotation diameter: approx. 210 mm Maximum speed 6,500 1/min Turret: VDI 40 mm, 12 stations The machine does not have a life tool. Hinged belt chip conveyor Spindle holder: GR. 5 Circulating parts conveyor. Machine weight: approx. 5.5 t The following work was carried out during this overhaul in 2023: -Machine was completely dismantled, cleaned and repainted, The main spindle was re-supported -The guides and guide shoes were replaced in the X-axis and Z-axis -The ball screw in the X-axis and Z-axis was replaced -New unit for central lubrication and new hoses Fgsbvcujtpu Szslnjb -Hydraulic unit was checked and serviced. Drive coupling between motor and pump was replaced -Cooling unit was checked and serviced: Temperature difference controller was replaced - Clamping cylinder was re-mounted and sealed. Gearbox of the A-axis was re-mounted and coupling between motor and gearbox was replaced -Electrical cabinet was cleaned -Control panel was replaced -New screen -New interior lighting -Turret was dismantled, wearing parts checked, cleaned and resealed -Cleaned turret encoder and encoder wheel -Length measuring systems in X-axis and Z-axis disassembled and cleaned -Pick-up station springs replaced -X-axis and Z-axis motors were checked for bearing damage -The windows on the work door were replaced. -The chip conveyor was completely dismantled, re-stored, cleaned and painted -Of course, various small parts of the machine were also replaced The product has been described by us with the utmost care. The description is non-binding and should be checked during an inspection.