Condition: excellent (used), Year of construction: 2016, Takamaz XY 120 Plus with Fanuc OTi Technical Specifications: • Year of Manufacture: 2016 • Control System: Fanuc Oi-TD • Machining Hours: 9,247 hours • Control System Hours: 24,218 hours (as of March 25, 2025) Axes: • X1 axis (150 mm) • Z1 axis (330 mm) • Y1 axis (+/- 35 mm) • X2 axis (150 mm) • Z2 axis (440 mm) • Machining Capacity: • Max. Turning Diameter: Main 170 mm / Sub 135 mm • Max. Turning Length: 330 mm • Bar Capacity: Main Ø 42 mm / Sub Ø 20 mm • Spindle Speed: up to 5,000 rpm • Drive Power: Powerful spindle motor for high cutting speeds • 2 Tool turrets: 12-station turret each _____ Accessories • Bar loader: Short bar loader • Coolant system Cebvanjwc Db Dohporb *AGW *Documentation

Condition: like new (used), Year of construction: 2010, Functionality: fully functional, WORKING CAPACITY Max bar working diameter 65 mm Max turning diameter 230 mm Max working length 250 (320) mm CNC CNC Fanuc 31i-T Notes Manual Guide, Polygoning, SBS Drives Fanuc MAIN SPINDLE Max rotation speed 4000 rpm Spindle nose ASA6” Spindle hole 80 mm Internal bearing diameter 110 mm Chuck diameter 165/210 mm Max power 26 kW Accuracy (C axis) 0.001° SUBSPINDLE Max rotation speed 5000 rpm Spindle nose ASA5” Spindle hole 55 (45 passage) mm Internal bearing diameter 80 mm Chuck diameter 165 mm Max power 11 kW Accuracy (C axis) 0.001° Automatic B axis positioning offset 115mm / stroke 420mm Rapid feed B 30 m/min TURRET 1 Rotation time (1 pos) 0.15 sec. Crjbvaewc A Txenhpsb Driven tools speed 4000 rpm Driven tools power 3.7 Kw Axis stroke X1 170 mm Rapid feed X1 18 m/min Axis stroke Z1 390 mm Rapid feed Z1 30 m/min Axis stroke Y1 90 (+40/-50) mm Rapid feed Y1 9 m/min TURRET 2 Positions number 12 Rotation time (1 pos) 0.15 sec. Number of driven stations 12 Driven tools speed 4000 rpm Driven tools power 3.7 Kw Axis stroke X2 170 mm Rapid feed X2 18 m/min Axis stroke Z2 390 mm Rapid feed Z2 30 m/min Axis stroke Y2 90 (+40/-50) mm Rapid feed Y2 9 m/min EXTRA Coolant pump 18Bar 350lt. Tool presetter 2 Workpieces conveyor belt Yes Chip conveyor yes Workpiece ejection robot yes Machine total weight 7400 kg Floor space 4400x2150x2200 mm The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1978, Functionality: fully functional, turning diameter over cross slide: 940 mm, spindle bore: 180 mm, turning diameter: 1,250 mm, turning length: 6,000 mm, quill diameter: 200 mm, spindle speed (max.): 355 rpm, overall weight: 10,500 kg, MACHINE CAPACITY: Maximum diameter on the bed: mm 1.250 Maximum diameter on the carriage: mm 940 Height of the centers: mm 625 Width and height of the bed: mm 800 x 630 Maximum weight of the piece between the centers: kg 5.000 Maximum weight of the piece between the steady rest: kg 6.000 Distance between the centers: mm 6,000 Maximum torque at the spindle: kpcm 125.000 Maximum cutting force: kp 5.000 Csbvjwc Aupjanhpsrb SPINDLE: Front side shaft diameter: mm 180 Boring diameter: mm 102 Spindle taper 1:10: mm 120 Front end of the spindle CSN 20 1010: mm 290 Spindle speed in 24 steps: rpm 1.8 – 355 CARRIAGE: Longitudinal feeds at all spindle speeds in 54 steps: mm/rev 0.8 - 7 Longitudinal feeds with spindle idler shaft in 54 steps: mm/rev 0.66 - 56 Cross feeds: mm/rev 0.33 of the longitudinal. Longitudinal rapid movement: mm/min 3,600 Useful stroke of the cross carriage: mm 530 Useful stroke of the tool holder slide: mm 340 Max. tool section for the tool holder: mm 60 x 60 THREADS: a. For rack gear 27 metric threads at a pitch of: mm 0.125 – 56 b. For main screw 40 metric threads at a pitch of: mm 1 – 112 42 Whitworth threads, number of threads per inch: ¼ - 28 32 module threads: module 0.5 – 28 36 Diametral Pitch D.P. 56 – 1 36 Circular Pitch C.P. 1/16 – 3 ½ MAIN SCREW: Diameter per pitch: mm TR 65 x 12 TAILSTOCK: Diameter of the tailstock hole: mm 150 Diameter of the tailstock quill: mod. 200 Diameter of the hole cone: mm 100/1:20 Transverse movement of the tailstock: mm +/- 10 Max. axial load of the tailstock: kp 5,000 Machine weight: kg 10,500 Complete with: - Fixed steady rest - Instruction manuals

Condition: excellent (used), Year of construction: 2020, OKUMA CNC turning Centre with Y-axis, C-axis, sub spindle and live tooling Type:LB3000 EXII Year:2020 Control:OSP-P300LA Suite Y-axis:+70mm / -50mm W-axis:800mm Distance between centres::1020mm Turning diameter over bed:580mm Turning diameter over cross slide:470mm Max. workpiece diameter:410mm Spindle bore:91mm Main spindle speed:4200rpm Sub-spindle speed:6000rpm Toolchanger:12atc Machine weight approx.:6850kg With automatic doors (original from the factory) With parts catcher Option extended tool data management Smoke extraction Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines are in production at time of photos and availability can not be guaranteed. We advise you to check any vital details! Crsbjwc Arhevanhpob

Condition: used, Year of construction: 2003, spindle bore: 52 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 450 mm, rotational speed (min.): 4,000 rpm, bar diameter: 52 mm, The Colchester TORNADO A 90 lathe was manufactured in 2003. Spindle speed 4000 rpm, spindle bore 52 mm and spindle motor power 11 kW. It is equipped with a Fanuc 21 i control system, including a TORNADO MBF feeder. Cebvowc Ac Teanhpsrb

Condition: good (used), Year of construction: 2007, operating hours: 21,168 h, machine/vehicle number: 8087020322B, For sale: GILDEMEISTER Sprint 65 linear CNC lathe Model: GILDEMEISTER Sprint 65 linear Year of manufacture: 2007 Control: SIEMENS 840D Operating hours: 21,168h On-time hours: 61,362 h Technical data: - Max. revolutions of main and counter spindle: 5000 rpm - Main spindle passage: up to Ø 65 mm (bore Ø 75 mm) - Rapid traverse speeds: up to 30 m/min Equipment: - 3 turrets with 12 stations each - Turret 1 has a fault and needs to be repaired. - Tool holder VDI 30 - Drive for driven tools on all turret stations - C-axis for main and counter spindle - Y-axis on slide 3 - Counter spindle flushing with coolant flushing - Workpiece collection device - Workpiece conveyor belt - Mechanical preparation for oil mist extraction device - Electrical interface and software preparation for bar loading magazine - Synchronous operation between main and counter spindles - Hinged belt chip conveyor - 2 additional inputs/outputs (4 M functions) - Workpiece counter and time calculator - Rigid thread cutting (without compensating chuck) - Software for polygon turning on slides 1, 2, 3 - Constant cutting speed - Spiral interpolation on slide 3 (thread milling) - Spindle speed monitoring system - Three-color signal light Cebvjvzwm Esanhpjrb - Air conditioning for electrical control cabinet - High-pressure coolant system with belt filter and heat exchanger (capacity 980 l, pressure 20 bar, 40 l/min. for turrets 1, 2 and 3) - 3-jaw chuck for main spindle - 3-jaw chuck for counter spindle - Coolant spray gun for cleaning the work area - Differential pressure system for the counter spindle with the option of setting 2 different clamping pressures - Flushing of the upper slides with cutting fluid - The machine is powered. Price: €36,000 Location: 75334 Straubenhardt If you are interested or would like further information, please contact us.

Condition: used, Year of construction: 2008, Functionality: fully functional, machine/vehicle number: X2S190, SPECIFICATION Distance between centres 1250mm Floor to spindle centres 1086MM Swing over bed (saddle wings) 400mm Swing over cross slide 246mm Crjbvanjwcz Tqshpob Swing in gap 858mm Gap width from faceplate 165mm Spindle bore 55mm Spindle nose Camlock D1-6 Taper in nose bush No. 4 MT Spindle speeds: Low range 1-297rpm Medium range 1-861rpm High range 1-2700rpm Tailstock quill travel 140mm Tailstock diameter 73mm Tailstock taper No. 5 MT MACHINE EQUIPPED WITH Fanuc 21iTB CNC Control Operation modes: manual, sequential, AlphaLink and ISO 3 jaw chuck Parat toolpost Lighting Coolant system Enclosed guarding Manual

Condition: good (used), DROOP & REIN - SZ100 Keyseating Machine Cobvaowczw Njnhpjrb -Largest clamping diameter: 140mm -Spindle bore: 40mm -Length of keyway in one pass: 100mm -Distance between chuck and tailstock center: 350mm -Working speeds: 3 -Electric chuck guard -Weight: approx. 300kg Dimensions: LxWxH 0.9x0.6x1.5 meters / Weight: 300kg Subject to errors and omissions

Condition: used, Year of construction: 2018, WAGNER WDST 780 x 1200 CNC lathe, No. 1836322, built in 2018, 12-station tool turret, chip conveyor, SIEMENS Sinumerik 828D control system, weight approx. 6,600 kg Cebvowczk Aeanhperb

Condition: used, Year of construction: 2019, Chuck - 12” Crobov Thr Aovanhpjb Length - 1200mm Controller - Fanuc Oi Mate-TD

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, turning length: 800 mm, turning diameter over cross slide: 400 mm, turning diameter: 500 mm, Machine Details Cjbvanhowcyy Aepjrb Stock No. 1105-03588 Type of machine CNC Lathe - Inclined Bed Type Make HAAS Type DS 30 Y Year of manufacture 2018 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Delivery time short term Freight basis ex works Technical details turning diameter 762 mm turning length 800 mm control Haas chucking diameter 254 mm hollow 76 mm swing diameter 762 mm turning speeds 3400 rpm output 407 Nm Power 22 KW Tool changer 12 VDI 40 transmission ratio 2 weight of the machine approx. 7.3 T t dimensions of the machine approx. 3.3 X 2 X 1.9 H m Additional information with manual guide (HAAS control) WIT C AXIS AND Y AXIS +LIVE TOOLS CHIP CONVOYER SUP SPINDLE

Condition: used, Functionality: fully functional, machine/vehicle number: 6/0008/08085, MACHINE SPECIFICATION Cont’d Diametral threads (21) 8 - 44 DP Metric pitches (39) 0.2 – 14mm Module pitches (18) 0.3 – 3.5 mod Sliding feeds, per rev. of spindle 0.0015 – 0.040” Surfacing feeds, per rev. of spindle 0.00075 – 0.020” Machine in Metric execution MACHINE EQUIPPED WITH Sino 2 axis DRO system 3 Jaw chuck Quick change toolpost Chuck guard Coolant System Lighting Rear splashguard Crsbjwczcfjvanhpob

Condition: used, Year of construction: 2011, WAGNER WDS 480 CNC lathe, No. TG 06067, built in 2011, 8-station tool turret, chip conveyor, SIEMENS Sinumerik 828D control system Crobvanowczkcshpsb

Condition: used, Year of construction: 2019, Controller - Fanuc Oi TF Year - 2019 Hydraulic Chuck size - 15" with rpm 2500 Manual Chuck size - 20 Inch include Turret capacity - 12 Crebvjv Tg U Njanhpjb Spindle bar capacity Dia - 115 mm Max turning dia - 635mm Swing over - 711mm Z-Axis - 2500 mm

Condition: used, Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 304372, MACHINE SPECIFICATION Centres Height 167mm Admits between 635mm Swing Over bed 330mm Over cross slide 210mm In gap diameter 480mm Length 115mm Spindle Bored to pass 38mm diameter Nose No. 4 D1 Camlock Speeds Number 16 Range 40 to 2500rpm Motor 1500rpm at 50Hz 2.2kW Cross Slide Width 140mm Travel 190mm MACHINE SPECIFICATION Cont’d Top Slide Width 82mm Travel 92mm Tailstock Quill – diameter 42mm – travel 110mm – morse taper No. 3 Set over +/-12mm Approx weight 635kg Crjbvowcy S Ejanhpjb Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 2 axis Digital Readout System 3 & 4 Jaw chucks Quick change toolpost and 2-off toolholders Lighting Chuck guard Coolant system Rear splashguard

Condition: used, Year of construction: 2011, WAGNER WDS 480 CNC lathe, No. TG 06064, built in 2011, 8-station tool turret, chip conveyor, SIEMENS Sinumerik 828D control system Cjbvaswczi Sonhpsrb

Condition: used, Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 304397, MACHINE SPECIFICATION Centres Height 167mm Admits between 635mm Swing Over bed 330mm Over cross slide 210mm In gap diameter 480mm Length 115mm Spindle Bored to pass 38mm diameter Nose No. 4 D1 Camlock Speeds Number 16 Range 40 to 2500rpm Motor 1500rpm at 50Hz 2.2kW Cross Slide Width 140mm Travel 190mm MACHINE SPECIFICATION Cont’d Top Slide Width 82mm Travel 92mm Tailstock Quill – diameter 42mm – travel 110mm – morse taper No. 3 Set over +/-12mm Approx weight 635kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 2 axis Digital Readout System 3 & 4 Jaw chucks Quick change toolpost and 3-off toolholders Lighting Chuck guard Coolant system Crjbvaowcyy Nenhpsb Rear splashguard

Condition: used, Year of construction: 2012, CNC lathe MTRent/MTCut T20MC (FCL-200MC), No. A2120101, built in 2012, 12-station tool turret, chip conveyor, SIEMENS Sinumerik 828D control system Csbvanswcziljhporb

Condition: used, Year of construction: 2012, CNC lathe MTRent/MTCut T20MC (FCL-200MC), No. A2120301, built in 2012, 12-station tool turret, chip conveyor, SIEMENS Sinumerik 828D control system Cebvanewczhnjhperb

Condition: used, Year of construction: 2015, CNC lathe MTRent/MTCut T25FY, No. M0150504, built in 2015, 12-station tool turret, chip conveyor, SIEMENS Sinumerik 828D control system Cebvaowczfyjnhpsrb

Condition: used, Year of construction: 2008, WAGNER DCD 250C x 1,500 lathe, No. G1311, built in 2008, center distance 1,500 mm, with SINO SDS6-3V XYZ control Crebowczfmjvanhpeb

Condition: used, TOS Sui 50-1500 lathe, No. 150150900039, center distance approx. 1,500 mm, weight 2,820 kg, with various lathe chucks Crjbvanowczd Nehpjb

Condition: used, Year of construction: 1999, STANKO Samat 400M lathe, No. 9990, built in 1999, center distance approx. 700 mm Cebvanswczdiohpsrb

Condition: used, Year of construction: 2020, WAGNER WDST 600x600 CNC lathe, No. 2027117, built in 2020, 12-station tool turret, chip conveyor, SIEMENS Sinumerik 828D control system, weight approx. 4,500 kg Csbvowczc Seanhpsrb

Condition: used, Year of construction: 2021, COLCHESTER Tornado A90 CNC automatic lathe, No. T90241, built in 2001, max. 6,000 rpm, 12-station tool turret, FANUC 21i-T control, with COLCHESTER Tornado MBF 1000 bar loader Crobowczcrjvanhpob