Condition: used, Year of construction: 2019, bar material dia. 32/38 mm spindle passage 44 mm turning length 320 mm turning speeds 200-8000 U/min c-axis 0,001 Grad gripping station 32/38 mm Fpjlq Ijuwv Tgs Rnpeg turning length 120 mm turning speeds 200-8000 U/min c-axis 0,001 0 number of tools 13 fix number of milling stations 4+5 driven control Mitsubishi Meldas Number of axles 5+2 St. total power requirement 7,5 kW weight of the machine ca. 2850 kg dimensions of the machine ca. 2,5 x 1,4 x 1,75 + Irco m CNC sliding headstock machine Citizen L32-1M8, built 01/2019 with barloader FMB turbo 3-36 equipped with swar- & coolant tank, fire distiguisher. ON/OFF 23.471h Running hours 21.495h GBL function (standard) LFV function: no

Condition: used, Year of construction: 1994, turning diameter over bed 350 mm turning diameter over slide rest 310 mm turning length 700 mm total power requirement 4,6 kW weight of the machine ca. 1,0 t Dimensions (HxWxD) 2.200 x 1.300 x 1.175 mm --> Technical data Centre height: 175 mm --> Centre width: 800 mm --> Swing diameter over bed: 350 mm --> Swing diameter over support: 310 mm --> Gap length in front of the faceplate: 145 mm --> Cross slide travel: 205 mm --> Top slide travel: 100 mm --> Tool cross-section: 20x20 mm --> Bed Width: 220 mm --> Height: 300 mm --> Headstock Spindle bore: 46 mm Fpjlq I Rnswc Dzwjpjg --> Spindle nose: DIN 55027-5 --> Spindle inner taper: 1:20 --> Tool holder: MK-3 --> Spindle speeds: 18 --> Speed range: 25 - 2000 rpm --> Tailstock Quill diameter: 50 mm --> Quill inner taper: MK-3 --> Quill travel: 140 mm --> Lateral adjustment: 10 mm --> Feed range Number of feeds: 256 --> Longitudinal feeds (128): 0.042 - 0.929 mm Rev --> Cross feeds (128): 0.015 - 0.338 mm Rev Quick clamping device, 10 x collets, 3 - jaw chuck Multifix steel holder size B, 8 x inserts 2 x travelling steady rest, 2 x chuck flange Multiple stop, machine feet Operating instructions

Condition: good (used), Short bar loader magazine LM 1200. Year of manufacture 11/2005. Very good condition – 100% functional. Available immediately. Fpolqjwfuntj I Rnpjg

Condition: good (used), Year of construction: 2002, CNC LATHE MUPEM WIN 65 2002 Max. bar capacity: 65 mm Front spindle bearing diameter: 110/150 mm Collet clamping system up to Ø: 60 mm HAINBUCH collet system up to Ø: 65 mm Maximum spindle speed: 3000 rpm Main spindle motor power: 11/15 kW MAIN TURRET Number of tools: 8 VDI-30 Maximum working stroke in Z: 50 mm Rapid traverse speed: 15 m/min Feed force: 6790 N CROSS SLIDE Number of horizontal slides: 2 Fjlqewc Aruo I Rnpepg Maximum working stroke at X1/X2: 70 mm Feed force at X1/X2: 8000 at 50 bar Maximum working stroke at Z1: 230 mm ADDITIONAL LOWER TURRET Number of tools: 8 VDI-20 VERTICAL SLIDES Number of vertical slides: 2 Maximum working stroke in X3 / X4: 70 mm Manual length adjustment: 50 mm Rapid traverse speed: 15 m/min Feed force at X1 / X2: 8000 at 50 bar Machine height: 1700 mm Machine area: 2900 x 1700 mm Machine weight: 4100 kg

Condition: used, Year of construction: 2023, Functionality: fully functional, CNC Lathe OR (VICTOR TAICHUNG MACHINERY WORKS CO. LTD.) Vturn A200 Fpjljwc Ad Req I Rnpeg Machine Data Year of Manufacture: 2023 Serial No.: KM1-1162 Turning Speed: Max. 7,000 rpm Control: FANUC Series 0i-TF Plus Weight: 7,000 kg Chip Conveyor: FONGEX KM-1 The sale will be subject to an online auction with the highest bid (plus buyer's premium and VAT). Please follow the link for more photos and information.

Condition: good (used), Year of construction: 2007, Functionality: fully functional, Control: Mazatrol640T Max. machining diameter: 320 mm Bar capacity: 51 mm Travel X/Y/Z: 240/100/495 mm Main spindle speed: 5,000 rpm Motor power: 22 kW Counter spindle Speed: 5,000 rpm Motor power: 22 kW Fpslq I Rnjwc Agrspjg 2 x 12-station turrets with live tools Options: LNS Quick Load Servo III short bar loader Automatic parts gripper Chip conveyor

Condition: used, Year of construction: 2005, Lathes Travel distance X: 550 mm Travel distanceY :110 mm Travel distance z: 1585 mm turning length: 1585 mm max. turning diameter: 640 mm spindle boring: 79 mm max. turning moment: 390 NM range of revolutions till: 5000 rpm Control: Siemens 840D powerline Fpolowczp Ssq I Rnpog 9 axis

Condition: used, Year of construction: 1998, Functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Mazak Lathe Type INTEGREX 50 Year 1998 No Tailstock Mazatrol T Plus CNC The Machine Is Complete Felqev Iv S Ts I Rnpepg With Chip Conveyor With All Documentation With 3 Tool Cabinets

Condition: used, Year of construction: 2009, turning diameter: 2,000 mm, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,400 mm, feed length X-axis: 1,600 mm, feed length Y-axis: 800 mm, feed length Z-axis: 1,400 mm, workpiece weight (max.): 7,000 kg, total length: 1,400 mm, 5-axis Vertical Lathe Multitasking machine OKUMA VTM-200YB YR2009 Fanuc-18iTB Max work dia: 2,000mm swing: 2,400mm Max work length: 1,400mm Weight: 7,000kg Fpslq Ijvwk Hde Rnpeg X:1,600 Z:1,400 Y:+-800mm B:90degree Curvic 5degree C:0.001degree

Condition: excellent (used), Year of construction: 1991, Multi-spindle & bar turning machines TRAUB TD 26 1991 * Spindle power 2.2 kW * Number of spindles 4 * Spindle bore 26 mm * Speeds 1.18 > 4750 mm * Total power 3.2 kW * Length L - R 1800 mm * Width V - H 1000 mm * Height 1400 mm * Weight 800 kg * Tool changer 6 tools Additional information * Max. round: 26 mm, max. square: 18 mm, max. hexagon: 22 mm * * Bar loader available Fpjlq I Rnswc Aqwspsg

Condition: good (used), Year of construction: 2011, GILDEMEISTER CNC Twin-Spindle Turning Center Type: CTX beta 1250 4 A Machine No.: 00700000211 Year of Manufacture: 2011 Folq Ijwcxlwo Rnpopg Control: CNC contouring control including 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and with ShopTurn 3 G Power-on time: 41,378 h Program runtime: 24,814 h Technical data and equipment available upon request

Condition: good (used), Year of construction: 2004, MAZAK QT Nexus 250 MS Manufacturer: MAZAK Model: QT Nexus 250 MS Year of manufacture: 2004 Control: Mazatrol 640T Nexus max. machining diameter: 380 mm Bar passage: 77 mm Travel X/Z: 230 / 575 mm Main spindle: Speed: 4,000 min-1 Motor power: 22 kW Counter spindle: Speed: 6,000 min-1 Motor power: 7.5 kW 12-position turret with driven tools Options: Multifeed MLI bar feeder Fpolq Ist S Izke Rnpsg Chip conveyor High pressure cooling 5 bar Automatic parts catcher

Condition: good (used), In good technical condition and fully functional. FANUC control system Spindle speed range: 8 – 3150 rpm Spindle motor power: 30/35 kW X-axis 1800 mm Y-axis 1500 mm Z-axis 1200 mm Machine dimensions: length x width x height 12000 mm × 9200 mm × 5500 mm Fpslq Iewcxble Rnpog Machine weight approx. 45,000 kg.

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier, slide guide -Tool slide: Support slide lower part support carrier Fjlq I Rnjwcw S Nspspg -Dovetail: 90 to 73 mm 12 mm high -Dimensions: see photos -Quantity: 5x bottoms available -Price: per piece -Dimensions: 210/180/H25 mm -Weight: 4 kg/piece

Year of construction: 2006, Condition: ready for operation (used), A Pinacho CNC precision parallel lathe is available. Center height: 180mm, center width: 750mm-1000mm, turning diameter over guide bed/longitudinal slide/cross slide: 360mm/335mm/198mm, bed width: 250mm, bore: 42mm, speed: 4000rpm, feed X/Z: 10m/min, rapid traverse X/Z: 10m/min. Tailstock shank diameter: 58mm, tailstock shank length: 200mm, Morse taper: MK3, min. travel of moving/fixed steady rest: 10mm, max. travel of moving/fixed steady rest: 70mm/114mm, control: Fanuc 0i. Documentation available. On-site inspection is possible Folq I Rnowftcvjpopg

Condition: excellent (used), Multi-spindle & bar-turning lathes TRAUB TK 42 * Spindle power 5.5 - 9 kW * Maximum workpiece length 206 mm * Spindle bore 42 mm * Length L - R 2500 mm * Width V - H 900 mm Fpslswc Aqdeq I Rnpog * Height 1700 mm * Tool changer holder 4 slides

Condition: ready for operation (used), Year of construction: 1963, Functionality: fully functional, machine/vehicle number: 3204, turning length: 1,000 mm, turning diameter: 600 mm, Equipment: - Three-jaw chuck 250 mm diam. - Four-jaw chuck 250 mm diam. - MULTFIX tool quick-change system size C, incl. 4 pcs. change holder - With center point - Quick-change drill chuck MK5 - Documentation Fjleumi R Nsq I Rnpjpg

Condition: excellent (used), Year of construction: 2010, operating hours: 15,600 h, Functionality: fully functional, Spindle speed: 50-6000rpm Movement XA-XB: 205mm ZA-ZB: 700mm W: 730mm YA-YB: 95mm Turrets: 2x 16pos Multitasking V16 Spindlespeed live tools: 45-6000rpm Motors live tools: 5.5/3.7kW Spindle motors: 22/15kW Manufacturing year: 2010.12 Length: 3300mm Width: 2500mm Height: 2500mm Weight: 9000kg Robot interface Fpsljwfr R Ejq I Rnpeg

Condition: used, Year of construction: 2001, Emco Turn 365 MC with counter spindle + chip conveyor (can be inspected under power) Year of manufacture 2001 Bar loader present --> feed cylinder defective Operating hours: read 16,000 Used condition Siemens control system Control cabinet cooling unit Has been inspected Work completed: Fpelov I Udneq I Rnpeg Main and counter spindle belts checked! Geometry completely measured and adjusted. New drive modules and E/R module Some work is still being done on the machine.

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier -Tool carriage: support carriage support carrier -Tool holder: Ø 32 mm Fpslqowcwndo I Rnpsg -Dimensions: see photos -Dimensions: 460/190/H205 mm -Weight: 21.6 kg

Condition: excellent (used), Year of construction: 1992, Control: CNC contouring control including color screen TRAUB TX 8 D TECHNICAL DATA Swing diameter over longitudinal slide: 560 mm Swing diameter over cross slide: 445 mm Turning diameter: 360 mm Fpolq I Rewfrk Sonpjg Turning length: 1000 mm Chuck diameter: 250/315 mm Spindle bore: 80 mm Drive power: 40 kW Speed range: up to 40 - 3150 rpm C-axis via separate servo motor Speed: 0.01 - 60 rpm Tool carrier: Number of turrets: 1 Number of tool holders: 14 Number of driven tools: 14 Power (at 40/20/10% duty cycle): 2.5/3.5/4.7 kW Max. speed: 2000 rpm Z-axis: 1070 mm X-axis: 285 mm Tailstock -Quill diameter 100 mm -Quill stroke 100 mm -Quill mount (DIN 228) MK 6 EQUIPMENT/ACCESSORIES  Hollow clamping cylinder  C-axis main spindle  Turret drive (14 driven tools)  Tailstock including live center  300 l coolant system, 2-stage pump 1.5/5 bar  Chip conveyor  Central lubrication system (with VOGEL piston distributor)  Measuring arm for measuring tools in the work area  Machine light  Three-jaw power chuck ø 250 mm FORKARDT 1512577 including clamping jaws  Mounting elements  Documentation

Condition: good (used), Year of construction: 2013, BAR CUTTING MACHINE TRAUB A 25 2013 Turning length: 65 mm Total power requirement: 2 kW Machine weight: approx. 0.7 t Space requirement: approx. 1200 x 700 x 1600 mm Fpelq I Rswc Amxjnpsg Thread length: 40 mm Max. part length: 65 mm Motor speeds: 1400-2800 Bar loader available!

Condition: reconditioned (used), Year of construction: 2008, operating hours: 45,000 h, Emco Maxxturn 45 with Y-axis for sale + Bar feeder and accessories (can be viewed under power) Year of manufacture 2008 On-time hours: 45,000 Very good condition Siemens control with ShopTurn High-pressure pump Has been overhauled and serviced Work performed: Main and counter spindle belts have been replaced! Geometry completely measured and adjusted. Drop tray bearings have been replaced Fpolq I Rnev I Uavspog Counter spindle slide plate + wiper have been replaced New main drive module + Complete Euro pallet with tools and various collets + Chucks for main and counter spindles, jaw chucks and collet chucks

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier Fpslq Iewcwizs Rnpjg -Tool slide: Support slide support carrier with turning tool holder -Clamping height: 40 mm -Dimensions: see photos -Dimensions: 370/180/H170 mm -Weight: 17.8 kg

Condition: excellent (used), Year of construction: 2000, CNC Lathe ZPS S 80 CNC/1000 2000 spindle bore : 92mm Bar diameter : 80mm X- axis : 275mm Z- axis : 1070mm Turning length : 1000mm Swing diameter : 430mm Felqjp N A D Ds I Rnpopg Swing diameter over bed : 680mm number of tool holders : 12 ( driven ) Heidenhain Pilot 3190 Version with driven tools CNC fully controlled C axis three-jaw chuck RÖHM D 315 mm hydraulic clamping cylinder