Condition: ready for operation (used), Spindle bore: 60 mm Swing diameter over bed: 500 mm Fpjb Em Hdoiqtzkomjg Center length: 1000 mm Dimensions: 3100x1400x1600mm

Condition: like new (used), Weiler center lathe model Condor 81 lead and feed spindle lathe with 3-axis digital display from Heidenhain ND780 Geometrically overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 86-498 >> Center height 165 mm >> Center width 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle passage 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.015 to 0.46 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 Kg >> Spindle brake can be switched on >> Length 1.83 m, height 1.29 m, depth 0.88 m Fpjb Eoq Tpahsm Hdmeg Accessories and equipment: >> 3-axis digital display from Heidenhain ND780 Reconditioned >> Quick-clamping device, collets as good as new from 2 to 30 mm, 1 mm increasing >> Three-jaw chuck Röhm 200 mm with 2 sets of jaws As good as new >> Mulifix size E with 4 steel holders NEW >> Bed stop >> Electric chuck protection >> Machine lamp LED New >> Rear wall >> Operating instructions >> Coolant system >> Machine feet About the machine: Offered is a Weiler Condor 81 guide and feed spindle lathe in a geometrically reconditioned condition, absolutely as good as new. The guides have been reground or re-scraped. With acceptance according to test report. 6 month guarantee. A very nice machine with electronic spindle protection. The accessories collet, chuck, multifix are new or as good as new. Spindles, spindle nuts, bearings, belts, scrapers have been replaced. Take the opportunity to view this machine on site under power and see for yourself its condition. A protective cover for the guide and feed spindle can be fitted for an additional charge.

Year of construction: 2005, Condition: ready for operation (used), A Nakamura CNC lathe with two spindles and two turrets from the multitasking lathe series is available. Turning diameter: 190mm, turning length: 515mm, bar capacity: 65mm, chuck diameter: 210mm, spindle speed: 5000rpm, spindle power main spindle/counter spindle: 15kW/11kW, number of turrets: 2, tool positions: 2x12, travel Y: +/-35mm, spindle-to-spindle distance: 200mm-800mm, machine dimensions X/Y/Z: approx. 3700mm/2300mm/1900mm, weight: approx. 8900kg, control: Fanuc, without bar loader. Documentation available. On-site inspection is possible. Fob Emjwgng Ee Hdmopg

Condition: good (used), Various steel holders for Multifix, size C Sold individually or in a package. Fpobswdtrbe Em Hdmeg

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, spindle bore: 40 mm, center height: 175 mm, turning length: 800 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, used L+Z lathe GDW type MS-175, center height 175mm, center width 800mm, spindle speeds 50-2500 rpm, spindle bore 40mm, 2-axis digital display ACU RITE, 1x three-jaw lathe chuck Ø 200mm, Multifix steel holder size B, chuck guard electrically secured, coolant pump. The machine is in stock at our warehouse in 71334 Waiblingen-Beinstein and is available immediately. Fjb Eovvhfnem Hdmspg

Condition: good (used), Traub, TNC 42/65 DGY, year 1996 Model TX8F turning length 450 mm Main drive Spindle speed range 4000 Spindle motor power 18.5 KW Weight 4,725 kg Accessories: chip conveyor, bar loader LNS Hydrobar and optical tool measurement Fpjb Emjrgq Dvj Hdmjg

Condition: excellent (used), Year of construction: 2011, Manufacturer: DMG Gildemeister Type: CTX Beta 800 V4 Year of manufacture: 2011 Control: Heidenhain IT Swing diameter: 700 / Max. turning diameter: 410 / Cross travel: 300 Chuck diameter: 315 Spindle bore: ø76 Fsb Em Hdowgmh Iemopg Drive power 40%/100% duty cycle: 34 kW / 25 kW Speed range from-to: 5000 rpm Approx. weight: 6100 kg Equipment: Axes: X, Z, C-axis + Y-axis Driven tools: Yes, 12 driven stations Tool carrier: Sauter 12-station VDI40 turret Tailstock: Yes Automatic quill stroke: Yes Quill mount: MK5 Chip conveyor: Yes - Oil mist extraction - Reinforced Coolant pump - Schunk Rota NCD 315-115 three-jaw chuck - Y-axis +/- 60 mm (120 mm) - 4 pallets with accessories: clamping jaws, tool holders, and driven tools - Driven tools: 4 radial, 6 axial Errors excepted

Condition: excellent (used), Year of construction: 1988, Functionality: fully functional, Weiler center lathe model Condor 81 Lead and feed spindle lathe with 3-axis digital readout Heidenhain Technical data: >> Year of construction 1988 Machine no. 88-955 >> Center height 165 mm >> Center width 750 mm >> Spindle speed : from 22 to 2800 rpm >> spindle clearance 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.015 to 0.46 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be activated >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital readout Heidenhain >> 1 piece three-jaw chuck new with 2 sets of jaws >> Collet chuck device collets from 3 to 30 mm 40 collets partly double >> Mulifix size B with 3 steel holders >> Bed stop >> Machine feet Fpeb Emetlu Sce Hdmjg >> Drill chuck >> Rotating center point For safety: >> Cover for lead and feed spindle >> 2 emergency stops >> Spindle brake To the machine : We are offering a used Weiler Condor 81 lathe built in 1988 in very good condition. The machine is of course fully functional. The lead and feed spindles are covered for safety. A very robust and powerful machine. The 3-axis digital readout from Heidenhain makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This new generation of Weiler lathes is very user-friendly. Take the opportunity to view and try out this machine under power on site.

Year of construction: 2003, Condition: ready for operation (used), Spindle clearance: 65mm, turning diameter: 275mm, turning length: 450mm, speed: 4000rpm, tool positions: 12, tool holder: VDI30, Y-axis: +/-35mm, C-axis: available, machine dimensions X/Y/Z: approx. 2750mm/1650mm/1800mm, weight: approx. 3500kg, control: TRAUB TX8H, including bar loader. Documentation available. On-site inspection is possible. Fpjbewgng So Em Hdmeg

Condition: used, Functionality: fully functional, Press brake with complete accessories. Fpjb Em Hdjwgl I Tsmjg

Condition: excellent (used), Year of construction: 2012, INDEX MS16C Fpsb Em Hdjwglwnsmeg

Condition: excellent (used), Year of construction: 2013, operating hours: 4,300 h, Functionality: fully functional, machine/vehicle number: NL 254131163, CNC controller M730BM with MAPS IV Capacity X-axis travel mm: 250 Y-axis travel mm: +/- 50 Z-axis travel: mm 795 Turning length mm: 705 Max. turning diameter mm: ø 366 Fpeb Est Akirem Hdmeg Swing over bad mm: ø 920 Swing over cross-side mm: 742 Bar work capacity mm: 80 Upper turret Number of tool slots St: 12 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5,5 / 3,7 (3 mm / cont) Main spindle Speed spindle rpm: 4,000 Drive power spindle kW: 18.5 / 15 (50% ed / cont) Chuck type: BB210 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Tailstock Tailstocktravel mm: 734 Holder: MT5 equipment Chip conveyor Tool measuring arm Foot switch for chuck or collet system Interface for bar feeder

Condition: reconditioned (used), Year of construction: 1999, Functionality: fully functional, spindle motor power: 7,500 W, spindle speed (min.): 10 rpm, spindle speed (max.): 6,000 rpm, overall weight: 2,750 kg, The Mazak Quick Turn 10 with Fusion 640T control system has been overhauled in the workshop and is in very good condition. Fob Eeu Auhaom Hdmopg

Condition: refurbished (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 27578101, WFL M30 with Promot gantry loader large tool magazine for 90 tools Fpsb Em Hdotr Dtfemeg with turret and subspindle SIEMENS 840C Very good condition, was overhauled 10 years ago Price free loaded

Condition: ready for operation (used), Year of construction: 2002, operating hours: 92,000 h, Functionality: fully functional, turning length: 1,097 mm, turning diameter over cross slide: 455 mm, spindle speed (min.): 18 rpm, spindle speed (max.): 3,600 rpm, spindle bore: 107 mm, travel distance X-axis: 320 mm, travel distance Z-axis: 1,097 mm, tool mount: 40 mm, total height: 2,130 mm, total length: 5,560 mm, chuck outer diameter: 315 mm, total width: 2,400 mm, quill stroke: 120 mm, quill diameter: 120 mm, overall weight: 8,900 kg, spindle diameter: 90 mm, We would like to get rid of our CTX500 due to a new purchase. The machine was built in 2002 and has since then done 91,535 hours for our company. The CTX500 is a 2-axis universal lathe with a partial hollow clamping device and has a chip conveyor, a tailstock, a three-jaw chuck SMW KNCS-N 315 and a tool carrier with 12 stations. It is fully functional and without any restrictions as it is and has been serviced at regular intervals. If you are interested, we could inspect the machine during a viewing and carry out a test run as it is still running as a production machine and is therefore under power. A sale would be possible immediately, handover possible in week 19 2025. Here are a few more technical details about the machine: Working area: - Swing diameter over bed track cover 680 mm - Swing diameter over face guide 455 mm - Chuck diameter 250/315 mm - Face stroke 320 mm - Longitudinal stroke 1097 mm Headstock: - Spindle head (flat flange) 220 h5 mm - Spindle diameter in the front bearing 140 mm - Spindle bore 107 mm Main drive: - Power of the three-phase main drive 23 kW - Speed range 18-3600 rpm Tool carrier: - Number of tool stations 12 (Tool holder according to DIN 69880 (VDI 3425) - Cylinder shank diameter 40 mm - Switching time 30° 0.86 sec. 180° 1.62 sec. Tailstock: - Quill diameter 120 mm - Quill holder MK 5 - Quill stroke 120 mm - Quill force max. 1400 daN Hydraulics: - Capacity approx. 30 l - Max. pressure 80 bar - Pressure for clamping device max. 80 bar Coolant device: - Capacity approx. 220 l - Pump output 1.7 kW - Delivery rate at 6 bar 20 l/min Fpob Ejvzy Dtjm Hdmog Fresh oil lubrication: - Capacity approx. 5 l Electrical connection: - Total connected load approx. 58.5 kVA - Voltage 400 V - Frequency 50 Hz - Fuse (slow) according to VDE 0100 100 A - Permissible voltage fluctuation at 400V (+/-) 10 % Ambient conditions: - Permissible ambient temperature from +15 to +35° C - Max. relative humidity 75 % - Max Installation altitude 1000 m above sea level Weights: - Net weight of the machine without chip conveyor approx. 8700 kg - Gross weight of the machine when transported by truck approx. 8900 kg Dimensions: - Machine with chip conveyor L x W x H approx. 5560 x 2400 x 2130 mm We are of course happy to answer any further questions you may have. Please just contact us.

Condition: used, Year of construction: 2020, turning diameter 647.7 mm Fsbewgi A Us Em Hdmspg turning length 1117.6 mm control Haas weight of the machine ca. 11749 kg

Condition: good (used), Year of construction: 1980, turning dia. 2500 mm, two vertical supports, one side Fsb Emowgiwfo Hdmopg

Condition: used, Year of construction: 2004, Functionality: fully functional, CNC lathe Boley with control Siemens sinumberik 802C Fsb Emjwginke Hdmjpg including all tools and bar feeder 3m bar diameters up to 20 mm

Condition: used, Year of construction: 2019, TSUGAMI B0386E-III Swiss type lathe WORKING AREA Bar diameter Ø mm 8 – 38 Max part length mm 320 (Direct-driven rotating guide bushing) Max part length mm 70 (Without guide bushing) Max drilling diameter Ø mm 13 Max thread diameter M 12 Max chuck diameter for sub spindle Ø mm 38 Max drilling diameter for sub spindle Ø mm 12 Max thread diameter for sub spindle M 12 Max drilling diameter for driven tools Ø mm 10 Max thread diameter for driven tools M 8 Max diameter T-slot cutter (driven tool) Ø mm 45 CAPACITY Max spindle speed main spindle rpm 6000 Max spindle speed sub spindle rpm 7000 Max spindle speed rotating guide bushing rpm 6000 Max spindle speed tool spindle rpm 5000 Number of tool positions pcs 29 Tool size mm 16x16x125, 20x20x125 Rapid traverse speed m/min 32 (Z2, X2) 24 (X1, Y1, Z1, Y2) MOTORS Main spindle kW 11 / 7.5 Sub spindle kW 5.5 / 3.7 Driven tools kW 1.4 (1.0 for cross-drilling units front tool post) Y2 kW 0.5 X1, Y1, Z1, X2, Z2 kW 0.75 Coolant pump kW 0.4 Lubricating oil pump W 3 CONTROL SYSTEM FANUC 32i-B Controlled axes (including C-axes) pcs 8 X1, Z1, Y1, X2, Z2, Y2, C1, C2 LCD / MDI 10.4” color LCD OTHER Coolant tank L 190 Length x width x height mm 2240 x 1515 x 2050 Net weight kg 4950 Power requirement KVA 22.5 EQUIPMENT: Fanuc 32i-B control system with 8 controlled axes (X1, Z1, Y1, X2, Z2, Y2, C1, C2) Cross drilling unit with 4 spindles C-axis for main spindle and sub spindle Automatic programming software Abile Tool height compensation function Tool counter Screen for periodic maintenance Door lock Coolant level detector Spindle cooler Standard tools Retractable coolant nozzle Brake for the main spindle MACHINE PRICE: TSUGAMI B0386E-III (8 controlled axes) OPTIONS INCLUDED IN THE MACHINE PRICE: Tool set gauge O.D. Included Signal tower 3-step Included Work lighting LED Included Bar interface Included High-pressure pump (1.5 kW, 20 bar, 18 l/min) Included Rear drive unit (rear drive, 1.4 kW) Included Brake for sub spindle Included Direct-driven rotating guide bushing (Tsugami 2621-1234) Included Adapted for water-based cutting fluid (water type coolant specification) Included Oil blowing with M code (X-axis front 1, X-axis rear, Z2) Included Adapter for main spindle (Shaublin F37) and sub spindle (Shaublin F37) Automatic power off Included Air blowing for main spindle, sub spindle, and cross drilling unit 2 years Fanuc warranty (from shipment) Transformer, Operator manual, Compliance with European requirements including CE marking Drill set gauge I.D. (Long, Middle, Short) Detail ejector front with oil blowing (stroke 147, max work length 106 mm) Part conveyor with part separator (chute width 135, belt width 90) Rigid tapping also for rotating tools (cross drill, rear drive, back drive) 3 tool spindles for rear drive ER16, max 5000 rpm (tool spindle for rear drive) 4 tool spindles for back tool post (3282-Y041) 4 back adapters (dia 25 fixed tool) Guide bush adapter (Dunner CJ9) Guide-bushless kit incl stopper Fsb Em Hdev Ipuzomopg Chip conveyor (flat type) 10.4” color screen Included Minimum input increment (0.0005mm for X1 & X2, 0.001 mm for other axes) Included Linear interpolation Included Circular interpolation Included G04 Dwell (delay) 0-99999.99 Included Absolute/Incremental programming (X, Z, Y, C absolute / U, W, V and H incremental) Included Number of tool offsets: 99 Included Program memory: 64 kB (80 m perforation tape) Included Num...

Condition: excellent (used), Year of construction: 1989, I am selling a CNC lathe Mazak QuickTurn 20N. Lathe in bdb condition. Equipment: MAZATROL T-2, control MAZATROL CAM-T-2. Fpeb Em Hdju U R E Ajmsg

Condition: excellent (used), Year of construction: 2018, operating hours: 21,500 h, Functionality: fully functional, Tsugami BO205E-III incl. Iemca Smart 320 loading magazine Conversion from long to short lathe possible High-pressure pump with 4 controllable valves Fire extinguishing system Fpsb Em Hdjwdru Ijmsg -available immediately-

Condition: excellent (used), Year of construction: 2012, Miyano BNA42 DHY yom 2012. Two turrets, two spindles. Max. Workpiece length 100 mm, Maximum bar diameter, round: SP 1 = 42mm, SP 2 =34mm Turret slide no. 1: X1-axis 140 mm, Z1-axis 235 mm, Y1-axis 70 (±35) mm, Spindle no. 2: X2-axis 140 mm, Z2-axis 310 mm Spindle speed range SP1 60 ~ 6000 min-1, Number of turning tools used max. 8 Slide feed speed: Rapid traverse: X1 axis 20 m/min, Z1 axis 20 m/min, Y1 axis 20 m/min, Fpjb Eovx E Dgsm Hdmsg X2 axis 12 m/min, Z2 axis 12 m/min, with CE certificate with bar loader LNS Sprint 542, year 2012 incl. additional channels Machine was used in the Swiss company. Now it is transported to the EU (Poland) and customs are paid.

Condition: excellent (used), Year of construction: 2007, TECHNICAL DETAILS: - CNC Control: MSX 850II - X axis mm: X axis: 260 mm - Z axis mm: Z axis: 590 mm - Y axis mm: Y-axis: +/- 50 mm - Max. Turning Diameter mm: Max. Turning Diameter mm: 356 - C axis Increase: 0.001 - Max. Turning Length mm - Cutting feedrate mm / min X, Z, Y: Cutting feedrate mm / min X, Z, Y - Swing over bed mm: Ø - Swing over slide mm: Over cross slide mm: Ø - Bar work capacity mm: Ø 65 (main) / Ø (sub) - Rapid traverse max. m / min X, Z: Rapid traverse max. m / min X,Z - Main Spindle L-SPINDLE 12” - Spindle speed rpm: Spindle speed: 5,000 rpm - Spindle power kW: Spindle power: 18.5 kW - Torque Nm: Torque Nm: - Main Spindle bore Main mm - Main Spindle Nose A2-6 - Sub-Spindle Sub-SPINDLE - Spindle speed rpm: Spindle speed: 6,000 rpm - Spindle power kW: Spindle power: 11 kW - Torque Nm: Torque Nm: - Main Spindle bore Main mm - Main Spindle Nose A2-5 - Upper Turret Positions: 12 - Number of live tool stations (each turret) / Number of rotating tool stations (each Turret: 12 - Rotating Tool Speed (rpm): 6,000 - Rotary Tool Power: 5.5 Feb Em Hjwdrfgedmspg EQUIPMENT: - Chip Conveyor - 3-color status lamp - Fixed tool holders - Parts Extractor MACHINE DIMENSIONS: - Length: 2,705 mm - Width: 2,000 mm - Height: 2,120 mm - Weight: 5,800 kg

Condition: like new (used), Year of construction: 2023, operating hours: 320 h, Commissioning in 2024 prepared for emulsion removal of long parts main spindle extension Ø 23 mm Feb Ejupi Hcem Hdmspg max. headstock stroke 205 mm max. speed 8,000 rpm 6-way turning tool holder on linear slide 4-way drilling unit including drilling fixtures (front/rear) 4 driven tools for cross machining on linear slide 4 tools including drilling fixtures for rear machining with drive speed of driven tools 8,000 rpm speed of counter spindle 9,000 rpm 7 axes bar loader IEMCA BOSS 338/32 HD

Condition: reconditioned (used), Year of construction: 2011, Functionality: fully functional, turning length: 320 mm, spindle speed (max.): 8,000 rpm, turning diameter: 32 mm, overall weight: 3,500 kg, Equipment: rotational speed infinitely variable, Citizen M32-3M5, very good condition, machine partially overhauled - All servo axis amplifiers replaced - Spindle bearings completely replaced - X2 slides re-scraped - Z2 guideways replaced - Geometry completely adjusted - Complete cleaning performed Number of tool stations on turret: 12 Number of servo axes: 8 (Z1/X1/Y1/X2/Z2/Y2/Z3/X3) Y-axis on the turret Part removal unit Including FMB Turbo 3-36 bar loading magazine Including Müller Combi Stream chip conveyor/high-pressure combo system Fjb Emewdrp So Hdmopg Including Kraft and Bauer fire extinguishing system Including 10 driven tool holders and 10 tool holders for the turret 1-year warranty on the replaced components Delivery and commissioning on-site available upon request