Used Wf for sale (379)

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Lrjdezb Il Njpfx Aiijn Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: new, Year of construction: 2024, Universal milling and drilling machine Kunzmann WF 610 M with Heidenhain TNC 128 control system Paths X/Y/Z = 610/400/450 mm Speed 1-4500 rpm Power 8.5 kW at 100 % ED Spindle SK40 DIN 69871 (form AD) with tightening bolt DIN 69872 Fixed angle table 800x 425 mm 6 x 14 H7 T-slots coolant device 66 liters electric handwheel HEIDENHAIN HR 510 FS Further technical data is available on request. Ljdpfsuf Sv Dex Aiiern The machine is located at our premises in 71334 Waiblingen-Beinstein, is immediately available and can also be inspected. Please register in advance.

Condition: good (used), Year of construction: 2001, Heidenhain TNC 310 cnc control electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 600 mm Querweg (Y-Achse) / Y-travel cross 400 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Werkzeugaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed range 60-5000 UpM Ljdeit Tr Topfx Aiiern Vorschub / feed 0-2000 mm/min. Eilgang längs + quer / rapid feed x/y 5 m/min. Eilgang senkrecht / rapid feed z 4 m/min. Antriebsleistung gesamt / drice capacity 7 kW Gewicht ca. / weight ca. 2000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, TECHNICAL DETAILS - table dimensions : 350 x 800 [mm] - T-slots : 7 - strokes, x, y, z : 400, 400, 370 [mm] - spindle speed : 50 - 2240 [rpm] - feed speed of potentiometer : 0 - 630 [mm/min.] EQUIPMENT - 3 axis display HENDENHAIN Lredpfxeuhbxao Aiijn - steel sheet retention

Condition: good (used), Year of construction: 1991, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, X-travel: 560 mm Y-travel: 500 mm Z-travel: 400 mm Control: TNC 360 Spindle speed: 40-4,000 rpm Total power requirement: 7.5 kW Lodpfxozgcfye Aiisrn Machine weight approx.: 2.6 t Space requirement approx.: 2.6 x 1.8 x 2.2 m

Condition: used, Year of construction: 1985, x-travel 500 mm y-travel 500 mm z-travel 350 mm table surface area 800 x 450 mm spindle taper: ISO 40 quill stroke mm feed - longitudinal/cross mm/min Lredpjtv Ia Tofx Aiisn feeds vertical mm/min turning speed range max. 3150 U/min voltage 380 V / 50 Hz power capacity 4 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,5 x 2,3 x 2,0 m • HEIDENHAIN TNC 155 - control, • with electrical hand wheel, • several tool tapers, • new set of bevel gears,

Condition: used, Year of construction: 1982, x-travel 400 mm y-travel 400 mm Lrjdsu U Sabepfx Aiijn z-travel 380 mm total power requirement 2,6 kW weight of the machine ca. 1,5t t

Condition: used, Year of construction: 1990, Motor output 5 kW Weight 1.500 kg Control cnc Ledowgnz Nspfx Aiiern

Condition: good (used), Year of construction: 1990, 1 used universal tool milling machine made by Mikron type WF 2 SA year 1990 with Heidenhain active digital readout TNC 114 Stepless feed Lamp Coolant device Lrsdpfsrywgzox Aiien Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm Clamping surface 635 x 250 mm Feed in 3 axes 0 - 750 mm/min Rapid traverse in 3 axes 1400 mm/min Holder ISO 40 Vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m Weight approx. 1200 kg

Condition: new, Siemens 6FM1725-3BA00 WF 725 B, hardware version A06, software version 1.8, unused, 100% functional. Lsdpji Ed Iaefx Aiiorn

Condition: ready for operation (used), Siemens 6FM1725-3BA00 WF 725B, Model A 0, used, in good condition, 100% functional. Lredpei Ed Idofx Aiien

Condition: like new (used), Year of construction: 2010, The machine comes from the Daimler Benz technical center and has 150 operating hours. X 650 mm Y 500 mm Z 450 mm Table size 1,100 x 600 mm Table load 450 kg Spindle speed range 6,500 rpm Spindle taper SK 40 Tool changer 24 positions Control system Siemens 840 D Total power 20 kW Machine weight 5,500 kg Bm9zrnafs87 Lsdstdfbmspfx Aiiern Space requirement (W x D x H) 2.3 x 3.1 x 2.3 m Condition: very good

Condition: excellent (used), Year of construction: 1987, Travel X/Y/Z 600/600/460 mm, 21 speeds 31,5 - 3150 rpm, motor 4,0 KW, spindle ISO 40, control Heidenhain TNC 150, table size 900x550 mm, hydraulic tool clamping, coolant device, spash guard, rapid feed, horizontal milling device, tilting turning table, clamping set, machine feet, manual, TOP condition Ljdpfx Aopcf D Ioiijrn

Condition: good (used), Mikron WF 41C CNC Universal Milling and Boring Machine Professional, extremely robust MIKRON WF 41C CNC universal milling and boring machine. Thanks to its sturdy construction, the machine is ideally suited for workshops, prototype manufacturing, maintenance, or demanding toolmaking applications. The machine is equipped with the proven HEIDENHAIN TNC 155 contouring control. It is extremely easy to program directly at the machine thanks to plain-language conversational guidance; it supports graphic simulations and allows for the easy loading of external CNC programs via the serial interface (ideal for CAD/CAM applications). Technical Data Overview CNC Control Model: HEIDENHAIN TNC 155 Operating modes: Manual operation (like digital readout), positioning with manual input, single block, block sequence, program test (graphic simulation) Interface: V.24 / RS-232-C for data transfer Feed Drives & Travel Ranges X-axis travel (table longitudinal, automatic): 630 mm Y-axis travel (spindle slide transverse, automatic): 500 mm Z-axis travel (table vertical, automatic): 460 mm Feed rate: Infinitely variable from 1 – 3000 mm/min in all 3 axes Rapid traverse speed: X- and Y-axis: 6000 mm/min | Z-axis: 4000 mm/min Max. vertical installation height: 559 mm (between vertical milling head and angle table) Ljdpfx Aiszcqf Ieijrn Milling spindle drive Spindle speeds: 21 gear stages Speed ​​range: 31.5 – 3150 rpm Spindle motor power: 6.0 / 8.0 kW Tool holder: ISO 40 / M16 with pull stud groove (SK 40 DIN 2080) Quill travel (vertical): 90 mm Table geometry & workpiece capacity Angle table clamping surface: 500 x 1000 mm T-slots: 7 (spacing: 63 mm, width: 14-H7 mm) Vertical clamping surface: 397 x 550 mm (with 4 x 4 M16 threaded holes, 90 mm spacing) Max. recommended workpiece weight: 500 kg Electrics & cooling Electrical connected load: 13.5 kW Coolant tank volume: approx. 100 liters Dimensions & weights Machine dimensions (machine only): 1745 mm (L) x 1501 mm (W) x 2124 mm (H) Max. operating footprint (incl. control arm): 2930 mm (L) x 2115 mm (W) x 2125 mm (H) Machine weight (net): 3100 kg (incl. vertical milling head and angle table) "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Year of construction: 1987, condition: good (used), max. drilling and milling diameter 20 mm maximum drilling depth 180 mm the largest drilling length 180 mm table surface dimensions (length / width) 280/600 mm the greatest distance from the table surface to the spindle axis 130 mm spindle speed 2800 rpm. engine power 2.2 kW air demand for sawdust extraction suction 300-350 m3 / h air speed in the extraction system 19-22 m / s squeegee tip connection diameter 80 mm Lodjiduhzopfx Aiiern dimensions (length / width / height) 1240/800/1350 mm weight 350 kg

Condition: used, z-travel:380 mm y-travel:400 mm x-travel:500 mm tool taper:SK 40 vertical head swivelling:beidseitig 90 Grad table-size:LxB 700x425 mm dimensions of the machine ca.:2x2x2 m quill stroke:60 mm groove width:14H7 mm flute distance:63 mm Ljdpfx Ascxxmqsiiorn weight of the machine ca.:2 t total power requirement:10 kW Speed range of live tooling:5 - 3000 min -1 Loading:max. 250 kg clamping slots:6 power capacity - milling spindle:5,5 kW

Condition: used, Year of construction: 1980, x-travel:500 mm y-travel:500 mm z-travel:400 mm Lrsdjcxxq Dspfx Aiisn turning speed range:30 - 2240 U/min feeds -stepless-:1 - 750 mm/min rapid traverse:1500 mm/min table surface area:400 x 800 mm tool taper:SK 40 total power requirement:7,8 kW weight of the machine ca.:1.8 t dimensions of the machine ca.:2,1 x 1,6 x 2,2 m

Condition: used, Year of construction: 1989, machine/vehicle number: 6766, x-travel:560 mm y-travel:500 mm z-travel:400 mm table-size:900 x 530 mm control:Heidenhain TNC 355 B/Q tool taper:ISO 40 / M 16 turning speed range:40 - 4000 U/min rapid traverse X-axis:6 m/min rapid traverse Y-axis:6 m/min Ljdscxxpqopfx Aiisrn rapid traverse Z-axis:5 m/min feeds x/y/z -stepless:2 - 3000 mm/min total power requirement:9 kW weight of the machine ca.:2,6 t dimensions of the machine ca.:2,6 x 1,8 x 2,2 m

Condition: good (used), Year of construction: 2007, Technical Data TNC 320 CNC control system XYZ: 600/400/400 mm SK 40 Gearbox: 1125 - 4500 rpm Lsdezb Iphjpfx Aiisrn Drive: 5.5 kW Horizontal/vertical 90-degree quill, stroke 60 mm Coolant tank: 70 liters Various tool holders

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 370 h, load capacity: 1,000 kg, lifting height: 3,900 mm, free lift: 1,800 mm, mast type: duplex, construction height: 2,400 mm, fork length: 1,150 mm, empty load weight: 950 kg, total length: 800 mm, construction width: 800 mm, High-lift pallet truck Load center: 600 Mast type: Duplex Technical condition: good Front tire type: Polyurethane Front tire condition: 80 - 100% Rear tire type: Polyurethane Rear tire condition: 80 - 100% Battery voltage: 24V Battery capacity: 160Ah Battery year of manufacture: 2020 Lsdpey U Afrofx Aiiern Impulse control, full free lift

Condition: used, Year of construction: 1973, spindle diameter 140 mm x-travel 2000 mm y-travel 2000 mm z-axis 1500 mm spindle stroke - max. 800 mm spindle taper ISO 50 table surface area 1800 x 1500 mm table load 15000 kg turning speed range 2,3 - 810 U/min total power requirement ca. 30 kW weight of the machine ca. 31000 kg dimensions of the machine ca. 7300 x 5600 x 4000 mm Equipment: - Faceplate with NC facing slide and NC rotary table - Heidenhain digital readout - Various tool holders Lsdjy Umc Uepfx Aiijrn - Various clamping devices

Condition: excellent (used), Year of construction: 1999, x-travel 400 mm y-travel 320 mm z-travel 400 mm Control HEIDENHAIN TNC 410 spindle turning speed - stepless 0 - 4000 U/min quill stroke 60 mm tool taper SK 40 table surface area 650 x 350 mm total power requirement 6,5 kW Lsdpfx Asunt Ihjiiern weight of the machine ca. 1,8 t dimensions of the machine ca. 2,5 x 1,8 x 2,0 m Electric handwheel HR 410 Probe MP 11, automatic tool measurement TT 120 Cabin, tool holders,...

Condition: good (used), Year of construction: 2006, Universal tool milling machine Manufacturer: KNUHT, Type: WF 5, Year: 2006, with 3-axis digital readouts, stepless feeds, and hydraulic tool clamping. Table size: 800 mm x 300 mm, maximum load capacity: 350 kg. Lodpfx Ajichr Sjiisrn Travel distances: X/Y/Z 450/400/320 Spindle connection: ISO 40 Spindle speeds: 63 - 3150 rpm Stepless feeds: 5-1250 mm/min Rapid traverse: 1800 mm/min Space required: 1.7 m x 1.7 m x 1.9 m, weight: approx. 1800 kg. Machine documentation available, machine ready for demonstration and in working order.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: M08L/8716, Offer Number: M08L/8716 Lrsdpfx Aowi Suleiisn Machinetype: 7 die - 7 blow warm forming header Info: bushing cut-off , PKO , IFO , 2 forma packs , PNP Transfer Make: NATIONAL FORMAX PLUS Type: FXP57S WF Constr. year: 2016 diameter range: 8,5-22 mm number of dies: 7 number of stations: 8 cutting length: 4-67 mm shaft length under head: 4-75 mm output - pieces/min: 175 press power: 200(126) to max. outside dia. of round pie: 42 mm stroke: 150 mm Location: In our warehouse

Condition: ready for operation (used), Year of construction: 2005, Make: KUNZMANN Type of machine: WF 650 Year of manufacture: 2005 Control system: HEIDENHAIN iTNC 530 Lrodpezawibefx Aiijn Machine's weight: 4.000 kg Tool holder: SK40 x-travel: 650 mm y-travel: 500 mm z-travel: 450 mm Speed range: 10.000 U/min max. Table load: 350 kg Overall dimensions: 3,0 x 2,5 x 2,6 m Table dimensions: 900 x 500 mm