Condition: good (used), Year of construction: 1990, Functionality: fully functional, Center high 290 mm Between centers 1000 mm Swing dia over bed 580 mm Swind dia over cross slide 380 mm X travel 295 mm Travel of hand slide 135 mm Spindle speed 20-2000 rpm (21 ranges) Motor power 7,5/11 kW Spindle hole D70 mm Spindle nose DIN55027 (8-er) Tailstock sleeve MT5 Feedrate longitudinal 0,04-12 mm/rev. (120 ranges) Feedrate cross 0,02-6 mm/rev. (120 ranges) Weight cca 2860 Kgs Accessories - Steady rest - Following rest - Faceplate Febvr Dfewdvmzs Uepg - 3 jaws chuck - Machine working light - Rapid feed

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, Details about the Traub TNK 36 (built in 2003) Fsbvr Dfewgpmae Uopg The machine is in working order and is fully equipped: • Various tool holders • Collets • Guide channels for the bar feeder The following CNC lathes are for sale: • Traub TNL 32-7, built in 2014 • Traub TNK 36, built in 2002 • Traub TNK 36, built in 2003 All machines can be inspected and tested live in 79115 Freiburg, Germany. If you are interested or have any questions, please feel free to contact me – I can send you further pictures or documentation upon request.

Condition: good (used), Internal Article No.: 25013 Lead and Feed Lathe Nardini MS 175E Year of Manufacture: 1986 The machine is equipped as follows: - Multifix base holder including 2 tool holders - MT3 drill chuck - 2 live center centers - Operating instructions / electrical diagram - 185E collet chuck, including one collet - 2 lynette chucks - Chuck flange - 6 machine feet Technical specifications: Center distance: 800 mm Center height: 175 mm Tailstock mount: MT3 Fpebjwdu R Sovr Df Ueg Quill stroke, tailstock: 130 mm Total power requirement: 4.8 kW (380 V / 16 A) Spindle head mount: DIN 55022 / Size 5 Spindle bore: 46 mm Speed range: 25 - 2000 rpm. Bed width: 220mm Dimensions (LxWxH): 220 x 150 x 120cm Weight: approx. 1000kg The machine is fully functional and can be inspected with power on by prior arrangement.

Condition: good (used), Functionality: fully functional, . Technical data : Tip height 110 mm Center width 160 mm Spindle bore 23 mm Fjbvr Dfswduwls Uopg . 3 speed ranges , approx. 0.65 kW , speed 1 700 rpm 1.0 kW , speed 2 1420 rpm 1.3 kW , speed 3 2880 rpm . - Cross support and 4-fold stops - Tilting tailstock with 2 quills, with electric reversal of direction of rotation for - Thread cutting device .

Condition: used, Barloader FMB Micromag 20 Fsbjwgpcuevr Df Uspg

Condition: used, Year of construction: 1997, - 4-jaw faceplate Ø 550 mm - 3-jaw lathe chuck Ø 310 mm incl. 4 sets of hard base jaws, 1 set of hard top jaws, 8 sets of soft top jaws - Fixed steady rest - rotating center point MK5 - Mulifix B quick-change holder incl. 10 tool holders - Switch-on time 32582 h - Year of manufacture 1997 - incl. operating instructions and technical documentation Technical data: Working range: - Tip width: 1000 mm - Center height: 280 mm - Circumferential diameter over bed: 570 mm - Circumferential diameter over facing slide: 340 mm - Bed width: 350 mm - Movement of the facing slide: 340 mm - Movement of the top support: 140 mm - Slide gate length: 700 mm - Slide width: 220 mm - Bed slide guide length: 560 mm - Turning tool cross-section (height/width): 32 x 25 mm Turning spindle: Fjbsr Hrq Dsvr Df Ujpg - Spindle head according to DIN 55027: size 8 - Spindle diameter in front bearing: 100 mm - Spindle bore: 66 mm - Inner taper of the main spindle: metr. 70 Main drive: - Drive power 60% / 100% ED: 15 / 11 kW - Max. Torque at the turning spindle: 1600 Nm - Total speed range: 1 - 2500 rpm - Speed range gear stage I: 1 - 625 rpm - Speed range gear stage II: 4 - 2500 rpm Feed drive: - Type: Three-phase servo drives - Feed range longitudinal and planar: 0 - 10 mm/rev - Feed force longitudinal: 9000 N - Feed force planar: 7000 N - Input speed longitudinal/plane: 7 / 3.5 m/min Tailstock: - Quill diameter: 70 mm - Quill stroke: 160 mm - Inner taper of the quill: MK5 Thread cutting range: - Metric threads: 0.1 - 250 mm - Inch thread: 1/4 - 56 G/1" - Module thread: 0.125 - 28 - DP thread: 1 - 224 Machine dimensions: - Dimensions WxHxD: 2850 x 1750 x 1815 mm - Weight of the machine: 2950 kg

Condition: ready for operation (used), Year of construction: 1992, turning diameter over cross slide: 650 mm, spindle bore: 128 mm, turning diameter: 1,000 mm, turning diameter over top slide: 650 mm, center height: 500 mm, center width: 5,000 mm, Capacity: 5000 x 1000 mm Spindle bore: 128 mm Fast steady rest Fpobvr Dfowgnwws Ueg

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, Details about the Traub TNK 36 (built in 2002) The machine is in working order and is fully equipped: • Various tool holders • Collets • Guide channels for the bar feeder The following CNC lathes are for sale: • Traub TNL 32-7, built in 2014 • Traub TNK 36, built in 2002 • Traub TNK 36, built in 2003 All machines can be viewed and tested live in 79115 Freiburg, Germany. Febvr Dewgpl Nsf Uspg If you are interested or have any questions, please feel free to contact me – I can send you further pictures or documentation upon request.

Year of construction: 1995, Condition: excellent (used), Numerical control lathe SOMAB MOD. OPTIMAB 400 Year of construction 1995 "CE". Used in excellent conditions. Turning length 1000 mm. Turning diameter on guides mm 400. Turning diameter above the slide mm 220. CNC NUM Mod.Somab PL+S3. Spindle hole: mm 43. Spindle speed : Rpm 80 - 4500 Motorized turret : nr. 12 positions. Weight : Kg 6000 Febvehuapgor Df Uepg Installed power : Kw 25 Machine dimensions (without chip conveyor): mm 2750 x 1805 x 2085. Chips evacuation device supplied. Turret tools supplied.

Condition: ready for operation (used), Spindle bore: 60 mm Swing diameter over bed: 500 mm Fjbvjiqtzkjr Df Uspg Center length: 1000 mm Dimensions: 3100x1400x1600mm

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25,4 [mm] - Max. machining length : 200 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0,1 [°] COUNTER-SPINDLE Fobvjwgpcnor Df Uopg - Max. bar diameter : 20 [mm] - Spindle speeds : 10.000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0,1 [°] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 5 GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 8.000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 6.000 [rpm] SECONDARY OPERATION - Number of positions : 7 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.270 x 1.650 [mm] - Machine height : 2.200 [mm] - Machine weight : 3.500 [kg] EQUIPMENT - CNC : Fanuc PNC DECO - Rotating tool motor on : S2, S3, S5 vertical + horizontal - Rotating guide bush - Parts catcher - Chips conveyor - Coolant tank - Bar loader : IEMCA MINI BOSS 325

Year of construction: 2005, Condition: ready for operation (used), A Nakamura CNC lathe with two spindles and two turrets from the multitasking lathe series is available. Turning diameter: 190mm, turning length: 515mm, bar capacity: 65mm, chuck diameter: 210mm, spindle speed: 5000rpm, spindle power main spindle/counter spindle: 15kW/11kW, number of turrets: 2, tool positions: 2x12, travel Y: +/-35mm, spindle-to-spindle distance: 200mm-800mm, machine dimensions X/Y/Z: approx. 3700mm/2300mm/1900mm, weight: approx. 8900kg, control: Fanuc, without bar loader. Documentation available. On-site inspection is possible. Fpsbvr Djwgng Eef Ueg

Condition: like new (used), Weiler center lathe model Condor 81 lead and feed spindle lathe with 3-axis digital display from Heidenhain ND780 Geometrically overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 86-498 >> Center height 165 mm >> Center width 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle passage 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.015 to 0.46 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 Kg >> Spindle brake can be switched on >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: Fsbvr Doq Tpahsf Uepg >> 3-axis digital display from Heidenhain ND780 Reconditioned >> Quick-clamping device, collets as good as new from 2 to 30 mm, 1 mm increasing >> Three-jaw chuck Röhm 200 mm with 2 sets of jaws As good as new >> Mulifix size E with 4 steel holders NEW >> Bed stop >> Electric chuck protection >> Machine lamp LED New >> Rear wall >> Operating instructions >> Coolant system >> Machine feet About the machine: Offered is a Weiler Condor 81 guide and feed spindle lathe in a geometrically reconditioned condition, absolutely as good as new. The guides have been reground or re-scraped. With acceptance according to test report. 6 month guarantee. A very nice machine with electronic spindle protection. The accessories collet, chuck, multifix are new or as good as new. Spindles, spindle nuts, bearings, belts, scrapers have been replaced. Take the opportunity to view this machine on site under power and see for yourself its condition. A protective cover for the guide and feed spindle can be fitted for an additional charge.

Condition: good (used), Year of construction: 2014, operating hours: 52,651 h, Functionality: fully functional, Details about the Traub TNL 32-7 (built in 2014): The machine is in good condition and has always been operated with oil. It is comprehensively equipped with: • Tool holders • Collets • Guide channels for the bar feeder Complete technical specifications and equipment details can be found in the PDF order confirmation. The following CNC lathes are for sale: Fpjbvowgpgmsr Df Uog • Traub TNL 32-7, built in 2014 • Traub TNK 36, built in 2002 • Traub TNK 36, built in 2003 The machines can be inspected and tested under power in 79115 Freiburg. If you are interested or have any questions, please contact me – I can provide additional pictures or documentation upon request.

Condition: excellent (used), BREDA BRF 150 X 800 mm Parallel Lathe Machine from school closure. Very good condition, ready to 'use. Height of centers: 150 mm Distance between centers: 800 mm Turning diameter on the carriage: 185 mm Self-centering chuck with 3 jaws : Diam. 160 mm Febsif Rrzjvr Df Uopg Rotational speed: 47 - 1440 Rpm Bar passage: 42 mm Tool turret included Bench width: 260 mm Tailstock attachment: C.M.3 Bezels supplied 4-jaw plateau supplied Tailstock supplied

Condition: good (used), Various steel holders for Multifix, size C Fobvjwdtrbsr Df Uspg Sold individually or in a package.

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25,4 [mm] - Max. machining length : 200 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0,1 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10.000 [rpm] Fjbowgpchevr Df Uspg - Spindle power : 3.7 [kW] - C axis indexing precision : 0,1 [°] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 5 GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 8.000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 6.000 [rpm] SECONDARY OPERATION - Number of positions : 7 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.270 x 1.650 [mm] - Machine height : 2.200 [mm] - Machine weight : 3.500 [kg] EQUIPMENT - CNC : Fanuc PNC DECO - Rotating tool motor on : S2, S3, S5 vertical + horizontal - Rotating guide bush - Parts catcher - Chips conveyor - Coolant tank - Bar loader : IEMCA MINI BOSS 325

Year of construction: 2003, Condition: ready for operation (used), Spindle clearance: 65mm, turning diameter: 275mm, turning length: 450mm, speed: 4000rpm, tool positions: 12, tool holder: VDI30, Y-axis: +/-35mm, C-axis: available, machine dimensions X/Y/Z: approx. 2750mm/1650mm/1800mm, weight: approx. 3500kg, control: TRAUB TX8H, including bar loader. Documentation available. On-site inspection is possible. Fsbowgng Ssvr Df Uopg

Condition: excellent (used), Year of construction: 1988, Functionality: fully functional, Weiler center lathe model Condor 81 Lead and feed spindle lathe with 3-axis digital readout Heidenhain Technical data: >> Year of construction 1988 Machine no. 88-955 >> Center height 165 mm >> Center width 750 mm >> Spindle speed : from 22 to 2800 rpm >> spindle clearance 40 mm Febvr Detlu Scsf Ujpg >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.015 to 0.46 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be activated >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital readout Heidenhain >> 1 piece three-jaw chuck new with 2 sets of jaws >> Collet chuck device collets from 3 to 30 mm 40 collets partly double >> Mulifix size B with 3 steel holders >> Bed stop >> Machine feet >> Drill chuck >> Rotating center point For safety: >> Cover for lead and feed spindle >> 2 emergency stops >> Spindle brake To the machine : We are offering a used Weiler Condor 81 lathe built in 1988 in very good condition. The machine is of course fully functional. The lead and feed spindles are covered for safety. A very robust and powerful machine. The 3-axis digital readout from Heidenhain makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This new generation of Weiler lathes is very user-friendly. Take the opportunity to view and try out this machine under power on site.

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, spindle bore: 40 mm, center height: 175 mm, turning length: 800 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, used L+Z lathe GDW type MS-175, center height 175mm, Febvrsvvhfne Df Uopg center width 800mm, spindle speeds 50-2500 rpm, spindle bore 40mm, 2-axis digital display ACU RITE, 1x three-jaw lathe chuck Ø 200mm, Multifix steel holder size B, chuck guard electrically secured, coolant pump. The machine is in stock at our warehouse in 71334 Waiblingen-Beinstein and is available immediately.

Condition: good (used), Traub, TNC 42/65 DGY, year 1996 Model TX8F turning length 450 mm Main drive Spindle speed range 4000 Fjbvr Dfjrgq Dvj Uepg Spindle motor power 18.5 KW Weight 4,725 kg Accessories: chip conveyor, bar loader LNS Hydrobar and optical tool measurement

Condition: excellent (used), Year of construction: 2011, Manufacturer: DMG Gildemeister Type: CTX Beta 800 V4 Year of manufacture: 2011 Control: Heidenhain IT Swing diameter: 700 / Max. turning diameter: 410 / Cross travel: 300 Chuck diameter: 315 Spindle bore: ø76 Drive power 40%/100% duty cycle: 34 kW / 25 kW Speed range from-to: 5000 rpm Approx. weight: 6100 kg Equipment: Axes: X, Z, C-axis + Y-axis Driven tools: Yes, 12 driven stations Tool carrier: Sauter 12-station VDI40 turret Tailstock: Yes Automatic quill stroke: Yes Quill mount: MK5 Chip conveyor: Yes - Oil mist extraction - Reinforced Coolant pump Fpjbvr Dfjwgmh Ij Uog - Schunk Rota NCD 315-115 three-jaw chuck - Y-axis +/- 60 mm (120 mm) - 4 pallets with accessories: clamping jaws, tool holders, and driven tools - Driven tools: 4 radial, 6 axial Errors excepted

Condition: used, Functionality: fully functional, Press brake with complete accessories. Fobvr Dfjwgl I Te Uopg

Condition: excellent (used), Year of construction: 2012, INDEX MS16C Fpsbvr Dfowglwno Uog

Condition: excellent (used), Year of construction: 2013, operating hours: 4,300 h, Functionality: fully functional, machine/vehicle number: NL 254131163, CNC controller M730BM with MAPS IV Capacity X-axis travel mm: 250 Y-axis travel mm: +/- 50 Z-axis travel: mm 795 Turning length mm: 705 Max. turning diameter mm: ø 366 Swing over bad mm: ø 920 Swing over cross-side mm: 742 Bar work capacity mm: 80 Upper turret Number of tool slots St: 12 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5,5 / 3,7 (3 mm / cont) Main spindle Speed spindle rpm: 4,000 Drive power spindle kW: 18.5 / 15 (50% ed / cont) Fpjbot Akirsvr Df Usg Chuck type: BB210 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Tailstock Tailstocktravel mm: 734 Holder: MT5 equipment Chip conveyor Tool measuring arm Foot switch for chuck or collet system Interface for bar feeder