Year of construction: 2001, Condition: reconditioned (used), GENERAL Project No: 905398 Quantity: 1 pc. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of Manufacture: 2001/2022 Condition: Retrofitted Machine Shifts approx.: 2-3 shift DESCRIPTION TURNING Max. Swing diameter over bed cover 210 mm Max. Clamping chuck diameter 170 mm Max. speed main spindle 7500 1/min Max. power main spindle at 10-40/100% duty ratio 25/16 kW Max. torque main spindle at 10-40/100% duty ratio 134/85 Nm Spindle diameter in front bearing main spindle 80 mm Spindle flange size main spindle Gr. 5 (DIN 55026) Axis at main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm Max. rapid traverse in X/Y/Z main spindle unit 60/-/30 m/min Feed force X/Y/Z main spindle unit 5000/-/5000 N Linear glass scales main spindle unit X/Z Solid clamping cylinder at main spindle Lower turret No. of stations/driven 12/12 Tool reception in turret VDI 40 Speed tool drive 6000 1/min FURTHER EQUIPMENT Fully enclosed work area Light in working area Oil-/emulsion mist extraction unit Slat band chain chip conveyor Discharge hight chip conveyor 1250 mm Coolant unit 80 l/min at 7 bar Felsiix N Ueq Amgvspg Loop-type part storage conveyor Max. workpiece diameter (27 workpieces with 30-85 mm or 18 workpieces with 30-130 mm) mm Max. workpiece length 100 mm Automatic central oil lubrication GENERAL TECHNICAL DATA Operating voltage 400/50 V/Hz Total power requirement 28 kVA Machine dimensions (LxWxH) approx. 2500x1900x2300 mm Space requirement of the whole equipement (LxWxH) approx. 3600x1900x2300 mm Machine weight approx. 5500 kg REMARKS We offer a professionally retrofitted machine. All crucial components, like guideways with roller carriages, ball screws, main spindle, bearings in turret and tool drive etc. have been replaced. Please also see attached document. . We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Condition: used, Year of construction: 1975, - 3-jaw lathe chuck Ø 400 mm - 4-jaw faceplate Ø 600 mm - Grinding attachment Ø 200 mm - Multifix - Change gears - Operating instructions & documentation - Year of manufacture 1975 Working area: - Center height: 300 mm - Swing over bed: 620 mm - Swing in the gap: 800 mm - Swing over the cross slide: 360 mm - Length of gap: 407 mm - Distance between centers: 1000 mm - Max. workpiece weight between centers (without steady rest): 1800 kg Main spindle: - Spindle head: 8 DIN 55022 - Spindle bore: 83 mm - Internal taper: Metric 90 - Center punch: MK5 Tailstock: - Quill stroke: 180 mm - Quill diameter: 85 mm - Quill inner taper: MK5 Clamping fixtures: - Faceplate diameter: 600 mm - Max. chuck diameter: 410 mm Main spindle speeds: - Number of steps: 18 - Range: 14 - 1000 rpm Feed rates: - Lengthwise feed: 0.086 - 4.866 mm/rev (66) - Cross feed: 0.040 - 2.258 mm/rev (66) - Cross slide travel: 375 mm - Top support travel: 210 mm Fpjlq Ajwdxmqsmgveg Thread pitches: - Metric threads: 0.5 - 28 mm (66) - Inch threads: 1 - 56 dpi (66) - Modular threads: 0.25 - 14 mm (66) - Diametrical pitch thread: 2 - 112 dpi (66) Installation: - Motor power: 15 kW - Operating voltage: 400 V - Dimensions W x H x D: approx. 2950 x 1400 x 1400 mm - Weight: approx. 3100 kg

Condition: used, Year of construction: 2005, turning length: 380 mm, turning diameter: 400 mm, spindle speed (min.): 60 rpm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, travel distance Y-axis: 60 mm, travel distance Z-axis: 380 mm, bar passage: 45 mm, total height: 1,950 mm, bar diameter: 45 mm, overall weight: 8,500 kg, controller manufacturer: FANUC, controller model: 18 ITB, machining diameter: 400 mm, number of spindles: 2, space requirement length: 3,650 mm, space requirement width: 1,820 mm, CONTROLS .. CNC controls FANUC 18 ITB BASIC FUNCTIONS .. number of spindles: 2 .. number of turrets: 1 .. live positions: yes .. number of c-axes: 1 .. number of y-axes: 1 Fjlq Aev Hp Hhjmgvspg .. number of b-axes: 1 WORKING RANGE TURNING .. swing diameter (max): 400 mm .. turning diameter (max): 220 mm .. bar diameter (max): 45 mm .. worpiece length max.: 380 mm MAIN SPINDLE .. spindle revolutions (min): 60 /min .. spindle revolutions (max): 5000 /min COUNTER SPINDLE .. drive power: 15 kW X/Z SLIDE .. Z-axis travel: 380 mm .. X-axis travel: 160 mm .. Y-axis travel: 60 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 3650 mm .. space requirements -front/back-: 1820 mm .. total height: 1950 mm .. total weight approx.: 8500 kg - Good condition, few operating hours - Operating hours: 47,000h - including equipment such as tool holders and clamping devices - LNS bar loader (optional)

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, TECHNICAL DETAILS: CNC Control: MAZATROL 640 T X-axis mm: X-axis mm: 190 Z-axis mm: Z-axis mm: 515 Y-axis mm: Y-axis mm: - Maximum Turning Diameter mm: / Max. Turning Diameter mm: 350 Cº Axis Increase: - Maximum Turning Length: Max. Turning Length mm 515 Cutting feedrate mm / min X, Z, Y: Cutting feedrate mm / min X, Z, Y Swing over bed mm: Ø 575 Swing over slide mm: Over cross slide mm: Ø 510 Bar work capacity mm: Ø 77 Rapid traverse max. mm / min X, Z, Y: Rapid traverse max. mm / min X, Z, Y: 30,000 / 33,000 Main Spindle L-SPINDLE 250 mm Spindle speed rpm: Spindle speed rpm: 35 - 4,000 Spindle power kW: Spindle power kW: 26 Torque Nm: Torque Nm: - Spindle bore Main mm - Spindle nose Main A2-6 Turret Positions Upper Turret Positions: 12 Number of rotating tool stations (Each turret): 12 Rotating tool speed: Rotary Tool power: Fjlqswdwmpe Amgvspg EQUIPMENT: Chip Conveyor Cooling System Turret Plate 250mm - Chuck 250mm Counter point - Tailstock MACHINE DIMENSIONS: Length mm / Length mm: 3,500 Width mm / Width mm: 1,700 Height mm / Height mm: 2,000 Weight kg / Weight kg: 6,000

Condition: excellent (used), Year of construction: 2015, Twin Spindle CNC Turning Centre Goodway GTZ-2600Y Year of manufacture 2015 First installed at the end customer in 2018 Siemens 828D CNC Control 8 controlled Axes Turning diameter 250 mm. Turning length 600 mm. Main spindle: Bar capacity 65 mm. Spindle drive motor rating 11 KW. Spindle speeds to 4000 rpm. C-Axis 0.001°. Back Spindle: Bar capacity 65 mm. Spindle drive motor rating 11 KW. Spindle speeds to 4000 rpm. C-Axis 0.001°. Back spindle longitudinal travel B: 690 mm. Tool turret I 16-station Driven tool positions (possible) 16 Tool drive motor rating 3.7/5.5 KW Tool speeds 6000 rpm. Cross travel X1 : 195 mm Longitudinal travel Z1: 620 mm. Vertical travel Y: +/- 50 mm (for off centre operations). Tool turret II 16-station Driven tool positions (possible) 16 Tool drive motor rating 3.7/5.5 KW Tool speeds 6000 rpm. Cross travel X2 : 210 mm Longitudinal travel Z2: 620 mm. Complete weight approx. 11000 kg Length 4445 mm Width 2555 mm Height 2360 mm Power supply required 65 KVA Complete with: 3-jaw chuck. Hainbuch collet chuck. Renishaw tool measurement for both turrets. Tool holder package. Feljhf T N Ssq Amgvepg Coolant system,. High pressure coolant pumps made by Grundfos 30 bar. Chip conveyor. LNS Alpha short bar magazine.

Condition: good (used), Year of construction: 1990, Functionality: fully functional, Center high 290 mm Folqewdvmzs Amgvepg Between centers 1000 mm Swing dia over bed 580 mm Swind dia over cross slide 380 mm X travel 295 mm Travel of hand slide 135 mm Spindle speed 20-2000 rpm (21 ranges) Motor power 7,5/11 kW Spindle hole D70 mm Spindle nose DIN55027 (8-er) Tailstock sleeve MT5 Feedrate longitudinal 0,04-12 mm/rev. (120 ranges) Feedrate cross 0,02-6 mm/rev. (120 ranges) Weight cca 2860 Kgs Accessories - Steady rest - Following rest - Faceplate - 3 jaws chuck - Machine working light - Rapid feed

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, GENERAL Project No.: 905732 Quantity: 1 pc. Manufacturer: TRAUB Type: TNL 18 Control: Traub TX 8i-s Year build: 2011 Condition: Used Machine Spindle on approx. (hrs): 28381 Programme run approx. (hrs): 36646 DESCRIPTION TURNING Max. turning diameter 20 mm Max. speed main spindle 10000 1/min Max. power main spindle at 10-40/100% duty ratio 3,7/2,2 kW Max. torque main spindle at 10-40/100% duty ratio 23,5/14 Nm Spindle bore main spindle 20 mm Axis at main spindle unit Z/C Headstock stroke main spindle 205 mm Max. rapid traverse in X/Y/Z main spindle unit -/-/40 m/min Hollow clamping cylinder at main spindle Max. speed opposed spindle 10000 1/min Max. power opposed spindle at 10-40/100% duty ratio 3,7/2,2 kW Max. torque opposed spindle at 10-40/100% duty ratio 23,5/14 Nm Spindle bore opposed spindle 20 mm Axis at opposed spindle unit X/Z/C Travel in X/Y/Z opposed spindle unit 100/-/262 mm Max. rapid traverse in X/Y/Z opposed spindle unit 20/-/40 m/min Fslq Asv Tbd Ejmgvepg Upper turret No. of stations/driven 8/8 Tool reception in turret 45 mm Speed tool drive 12000 1/min Axis in turret X/Y/Z/H Travel in X/Y/Z 120/-40 bis +25/250 mm Max. rapid traverse in X/Y/Z 20/20/40 m/min Lower turret No. of stations/driven 8/8 Tool reception in turret 45 mm Speed tool drive 12000 1/min Axis in turret X/Y/Z/H Travel in X/Y/Z 120/-20 bis +40/250 mm Max. rapid traverse in X/Y/Z 20/20/40 m/min FURTHER EQUIPMENT Fully enclosed work area Light in working area Oil-/emulsion mist extraction unit Slat band chain chip conveyor Machine operates/operated with oil Coolant unit with paperband filter High pressure pump 50 bar Automatic CO2-fire extinguishing system Part outfeed conveyor Finish-part pick-up unit Bar loader/magazine make FMB minimag 20 Max. bar length 3200 mm ACCESSORIES 2 pc. Collet chuck 1 Set Tool holder for turning tools 1 Set Tool holder for driven tools 1 Set Spare Parts for the machine (i.e. Mitsubishi Power modules, etc.) 1 Set Changing tubes GENERAL TECHNICAL DATA Total power requirement 24 kVA Machine dimensions (LxWxH) approx. 3060 x 1460 x 2250 mm Machine weight approx. 4000 kg REMARKS We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, Details about the Traub TNK 36 (built in 2003) The machine is in working order and is fully equipped: • Various tool holders • Collets • Guide channels for the bar feeder The following CNC lathes are for sale: • Traub TNL 32-7, built in 2014 • Traub TNK 36, built in 2002 • Traub TNK 36, built in 2003 Fpolewgpmaeq Amgvog All machines can be inspected and tested live in 79115 Freiburg, Germany. If you are interested or have any questions, please feel free to contact me – I can send you further pictures or documentation upon request.

Condition: good (used), Internal Article No.: 25013 Lead and Feed Lathe Nardini MS 175E Year of Manufacture: 1986 The machine is equipped as follows: Fpsljwdu R Sjq Amgvjg - Multifix base holder including 2 tool holders - MT3 drill chuck - 2 live center centers - Operating instructions / electrical diagram - 185E collet chuck, including one collet - 2 lynette chucks - Chuck flange - 6 machine feet Technical specifications: Center distance: 800 mm Center height: 175 mm Tailstock mount: MT3 Quill stroke, tailstock: 130 mm Total power requirement: 4.8 kW (380 V / 16 A) Spindle head mount: DIN 55022 / Size 5 Spindle bore: 46 mm Speed range: 25 - 2000 rpm. Bed width: 220mm Dimensions (LxWxH): 220 x 150 x 120cm Weight: approx. 1000kg The machine is fully functional and can be inspected with power on by prior arrangement.

Condition: good (used), Functionality: fully functional, . Technical data : Tip height 110 mm Center width 160 mm Spindle bore 23 mm . 3 speed ranges , approx. 0.65 kW , speed 1 700 rpm 1.0 kW , speed 2 1420 rpm Felq Aewduwlemgvopg 1.3 kW , speed 3 2880 rpm . - Cross support and 4-fold stops - Tilting tailstock with 2 quills, with electric reversal of direction of rotation for - Thread cutting device .

Condition: good (used), Year of construction: 2009, operating hours: 9,400 h, CNC lathe with C-axis, driven tools + Y-axis + handling DMG - Gildemeister CTX Alpha 500 Siemens 840D sl ShopTurn control Fpelq Amjrx R N Isgveg Rotation diameter over bed: 500 mm Rotation diameter over support: 290 mm Turning diameter for shafts: 200 mm Turning length: max. 500 mm Travel distances: X 190 mm Y +/- 40 mm Z 525 mm Rapid traverse: X,Z 30,000 mm/min. Y 22,500 mm/min. Spindle nose: 150h5 Spindle bearing diameter: 100 mm Bar capacity: 51 mm Spindle drive power: 20/27 kW Spindle speed: max. 6,000 rpm Spindle torque: max. 170 Nm C-axis: C-axis 0.001° Chuck diameter: 210 mm Tool turret positions: 12 Driven tool positions: 12 Tool holder: VDI 30 Tool drive power: 5.4 kW Tool speeds: 5,000 rpm Tool torque: max. 18 Nm Automatic tailstock travel: 550 mm Automation/handling system for portal parts: Huber - 3-axis Machine weight: max. 4,650 kg Accessories: C-axis and driven tools. Y-axis for off-center milling/drilling operations. 12-position tool turret. Automatic tailstock. Chip conveyor. Tool package. Automation - HUBER 3-axis gantry parts handling system. With parts magazine. Good condition. 9400 program runtime hours. Offer number L-4860

Condition: used, Barloader FMB Micromag 20 Fpslq Amgjwgpcuevsg

Condition: used, Year of construction: 1997, - 4-jaw faceplate Ø 550 mm - 3-jaw lathe chuck Ø 310 mm incl. 4 sets of hard base jaws, 1 set of hard top jaws, 8 sets of soft top jaws - Fixed steady rest - rotating center point MK5 - Mulifix B quick-change holder incl. 10 tool holders - Switch-on time 32582 h - Year of manufacture 1997 - incl. operating instructions and technical documentation Technical data: Working range: - Tip width: 1000 mm - Center height: 280 mm - Circumferential diameter over bed: 570 mm - Circumferential diameter over facing slide: 340 mm - Bed width: 350 mm - Movement of the facing slide: 340 mm - Movement of the top support: 140 mm - Slide gate length: 700 mm - Slide width: 220 mm - Bed slide guide length: 560 mm - Turning tool cross-section (height/width): 32 x 25 mm Turning spindle: - Spindle head according to DIN 55027: size 8 - Spindle diameter in front bearing: 100 mm - Spindle bore: 66 mm - Inner taper of the main spindle: metr. 70 Main drive: - Drive power 60% / 100% ED: 15 / 11 kW - Max. Torque at the turning spindle: 1600 Nm - Total speed range: 1 - 2500 rpm - Speed range gear stage I: 1 - 625 rpm - Speed range gear stage II: 4 - 2500 rpm Feed drive: - Type: Three-phase servo drives - Feed range longitudinal and planar: 0 - 10 mm/rev - Feed force longitudinal: 9000 N - Feed force planar: 7000 N - Input speed longitudinal/plane: 7 / 3.5 m/min Tailstock: - Quill diameter: 70 mm - Quill stroke: 160 mm Fslq Amjr Hrq Degvspg - Inner taper of the quill: MK5 Thread cutting range: - Metric threads: 0.1 - 250 mm - Inch thread: 1/4 - 56 G/1" - Module thread: 0.125 - 28 - DP thread: 1 - 224 Machine dimensions: - Dimensions WxHxD: 2850 x 1750 x 1815 mm - Weight of the machine: 2950 kg

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, Details about the Traub TNK 36 (built in 2002) Fpolowgpl Njq Amgvjg The machine is in working order and is fully equipped: • Various tool holders • Collets • Guide channels for the bar feeder The following CNC lathes are for sale: • Traub TNL 32-7, built in 2014 • Traub TNK 36, built in 2002 • Traub TNK 36, built in 2003 All machines can be viewed and tested live in 79115 Freiburg, Germany. If you are interested or have any questions, please feel free to contact me – I can send you further pictures or documentation upon request.

Condition: ready for operation (used), Year of construction: 1992, turning diameter over cross slide: 650 mm, spindle bore: 128 mm, turning diameter: 1,000 mm, turning diameter over top slide: 650 mm, center height: 500 mm, center width: 5,000 mm, Capacity: 5000 x 1000 mm Spindle bore: 128 mm Fpjlq Aowgnwwemgvog Fast steady rest

Year of construction: 1995, Condition: excellent (used), Numerical control lathe SOMAB MOD. OPTIMAB 400 Year of construction 1995 "CE". Used in excellent conditions. Turning length 1000 mm. Turning diameter on guides mm 400. Turning diameter above the slide mm 220. CNC NUM Mod.Somab PL+S3. Spindle hole: mm 43. Spindle speed : Rpm 80 - 4500 Motorized turret : nr. 12 positions. Fpolq Ashuapgsmgvog Weight : Kg 6000 Installed power : Kw 25 Machine dimensions (without chip conveyor): mm 2750 x 1805 x 2085. Chips evacuation device supplied. Turret tools supplied.

Condition: good (used), Year of construction: 2005, CNC double spindle lathe Emco Hyperturn 665 MC Plus Year of manufacture 2005 Siemens Sinumerik 840D Swing diameter over bed: 600 mm Swing diameter over support: 500 mm Turning diameter: max. 430 mm Turning length: max. 744 mm Distance between spindles: max. 975 mm Travel paths of the upper support: X1/Z1 280/750 mm Travel paths of the lower support: X2/Z2 205/705 mm Counter spindle longitudinal travel: Z3 750 mm Rapid traverse: X1/X2 24,000 mm/min. Z1/Z2 30,000 mm/min. C1/C2 1,000 rpm. Main spindle:: Spindle nose: DIN-55026 KK 6 Spindle bore: 73 mm Bar capacity: 65 mm Spindle drive power: 29 kW AC Spindle speeds: 0 - 5,000 rpm. Spindle torque: max. 250 Nm Spindle indexing: C 0.001° degrees Counter spindle:: Spindle nose: DIN-55026 KK 6 Spindle bearing diameter: 85 mm Spindle drive power: 17/22 kW AC Spindle speeds: 0 - 7,000 rpm. Spindle torque: max. 130 Nm Spindle indexing: C 0.001° degrees Upper tool turret: Tool turret positions/driven: 12/12 Tool holder: VDI 30 Tool drive power: 6.7 kW Tool speeds: 0 - 4,000 rpm. Tool torque: max. 25 Nm Lower tool turret: Tool turret positions/driven: 12/12 Tool holder: VDI 30 Tool drive power: 6.7 kW Tool speeds: 0 - 4,000 rpm. Tool torque: max. 25 Nm Machine weight: approx. 7,600 kg Machine dimensions: LxWxH, approx. 3,400 x 2,550 x 2,300 mm Accessories: 6-axis, CNC double spindle, double turret, turning center. 2 x spindles with C-axis. 2 x tool turret with driven tools. Main spindle with collet chuck for 65 mm bars. Counter spindle with 3-jaw chuck. Bar loading magazine. Part catcher. Finished part conveyor. Chip conveyor. Large amount of tools included! Condition: Should be in very good condition. Felevpun Noq Amgvspg 2 x machines available! Offer number L-4892 + L-4893

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25,4 [mm] - Max. machining length : 200 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0,1 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10.000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0,1 [°] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 5 GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 8.000 [rpm] END ATTACHMENT - Number of positions : 4 Felqowgpcnj Amgvepg - Number of motorized positions : 4 - Live tools speed : 6.000 [rpm] SECONDARY OPERATION - Number of positions : 7 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.270 x 1.650 [mm] - Machine height : 2.200 [mm] - Machine weight : 3.500 [kg] EQUIPMENT - CNC : Fanuc PNC DECO - Rotating tool motor on : S2, S3, S5 vertical + horizontal - Rotating guide bush - Parts catcher - Chips conveyor - Coolant tank - Bar loader : IEMCA MINI BOSS 325

Condition: good (used), Year of construction: 2014, operating hours: 52,651 h, Functionality: fully functional, Details about the Traub TNL 32-7 (built in 2014): The machine is in good condition and has always been operated with oil. It is comprehensively equipped with: • Tool holders • Collets Fpolq Aswgpgmomgveg • Guide channels for the bar feeder Complete technical specifications and equipment details can be found in the PDF order confirmation. The following CNC lathes are for sale: • Traub TNL 32-7, built in 2014 • Traub TNK 36, built in 2002 • Traub TNK 36, built in 2003 The machines can be inspected and tested under power in 79115 Freiburg. If you are interested or have any questions, please contact me – I can provide additional pictures or documentation upon request.

Condition: excellent (used), BREDA BRF 150 X 800 mm Parallel Lathe Machine from school closure. Very good condition, ready to 'use. Height of centers: 150 mm Fpolq Asif Rrzjmgveg Distance between centers: 800 mm Turning diameter on the carriage: 185 mm Self-centering chuck with 3 jaws : Diam. 160 mm Rotational speed: 47 - 1440 Rpm Bar passage: 42 mm Tool turret included Bench width: 260 mm Tailstock attachment: C.M.3 Bezels supplied 4-jaw plateau supplied Tailstock supplied

Condition: good (used), Year of construction: 2012, S&T ST-40/55 VC Vertical Turning & Milling 2012 Fanuc 31i CNC Table diameter 4000 mm Turning diameter 5500 mm Turning height 2600 mm Table drive motor 60/75 KW Table speeds 60 rpm C-Axis 0.001° Milling spindle motor 22/26 KW Milling spindle speeds 1500 rpm Folq Amem Shcregvspg 16 station tool changer Proposal Number V(K)-6833

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25,4 [mm] - Max. machining length : 200 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0,1 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10.000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0,1 [°] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 5 GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 8.000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 6.000 [rpm] SECONDARY OPERATION - Number of positions : 7 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.270 x 1.650 [mm] - Machine height : 2.200 [mm] - Machine weight : 3.500 [kg] EQUIPMENT - CNC : Fanuc PNC DECO Fpjlq Amswgpchjgvog - Rotating tool motor on : S2, S3, S5 vertical + horizontal - Rotating guide bush - Parts catcher - Chips conveyor - Coolant tank - Bar loader : IEMCA MINI BOSS 325

Condition: excellent (used), Year of construction: 1989, Very good condition Conventional VTL for sale from end user / factory Morando (Italy) Model VS 12 Built 1989 DRO digital readout Hydraulic clamping chuck diameter 1200 mm Table load capacity max. 7.5 t (7500 kgs.) Turning diameter max. 1400 mm Turning height max. 1000 mm Left ram vertical travel 1000 mm. Swivel range +/- 25° Right ram (5 position turret) vertical travel 760 mm. Swivel range +/- 25° Table drive motor 37 KW Table speeds 4.5 - 252 rpm Fpslq Amjvy Dwzjgvog Conical turning Chip conveyor Chip and splash guards Weight 20 t. Very good condition and can be inspected under power. Proposal Number V(K)-7032

Condition: excellent (used), Year of construction: 1991, CNC vertical lathe with tool changer Dörries Scharmann VCE 1600/140 SM Contumat 2 Year of construction 1991/retrofit Siemens 828D (retrofit) Faceplate diameter: 1,400 mm Face plate load: max. 9,000 kg Swing diameter: max. 1,750 (1,890 with open door) mm Turning diameter: max. 1,600 (1,750 currently turned) mm Turning height: max. 1,500 mm Plunger input bore: min. 340 mm Number of rams: 1 Ram cross travel: X 1,900 (+/- 950) mm ram vertical travel: Z 1,000 mm Cutting feeds: 0.1 - 6,000 mm/min. 0.01 - 500 mm/rev. Rapid traverse: X,Z 8,000 mm/min. Crossbeam vertical travel: 900 (9 x 100) mm Crossbeam speed: 425 mm/min. Table drive power: 69 kW Table speeds: 0 - 315 rpm. Gear stage: I 2.8 - 78.75 rpm. Gear stage: II 11.2 - 315 rpm. Torque on faceplate: max. 40,000 Nm Automatic tool changer: Tool magazine positions: 20 Tool radius: max. 200 mm Tool length: max. 675 mm Accessories: Large tool pack; Large spare parts package; Large package of clamping jaws; Full cladding; Chip conveyor; Coolant system; Fslq Amotx Au Hjgvepg New coolant and flood coolant pumps. Condition: Very good condition. The mechanical condition is very good. Completely new electrics and Siemens 828D Siemens ONE system. The machine works with very high accuracy. Offer number V(K)-6899

Condition: excellent (used), Year of construction: 1995, turning height: 3,200 mm, turning diameter: 3,300 mm, feed length Z-axis: 1,700 mm, faceplate diameter: 3,000 mm, rapid traverse X-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, spindle speed (min.): 10 rpm, spindle speed (max.): 2,000 rpm, year of last overhaul: 2020, CNC vertical lathe with C-axis + milling spindle Doerries Scharmann VC-3500/300 year of construction 1995 Fanuc 18iTB Faceplate diameter: 3,000 mm Faceplate load: max. 50,000 kg Turning diameter: max. 3,300 mm Turning height: max. 3,200 mm Travel distances: X -2,550 / +2,550 mm Z 1,700 mm Crossbeam vertical travel: W 1,800 mm Support sleeve size: 250 x 250 mm Rapid traverse: X/Z 6,000 mm/min. Table drive power: 105 kW Table speeds: 0.6 - 110 rpm. Torque at table: max. 140,000 Nm C-axis: 0.001° Tool magazine positions: max. 27 Driven positions: max. 17 Milling spindle speeds: 10 - 2,000 rpm Milling spindle drive power: 22 kW Fpslq Amgsqy Nmasvog Tool holder: BT50 Accessories: Extended + retrofitted Retrofit + update/extension 2020 Condition: Very good Offer number V(K)-6834