Condition: excellent (used), Year of construction: 2013, operating hours: 4,300 h, Functionality: fully functional, machine/vehicle number: NL 254131163, CNC controller M730BM with MAPS IV Capacity X-axis travel mm: 250 Y-axis travel mm: +/- 50 Z-axis travel: mm 795 Turning length mm: 705 Max. turning diameter mm: ø 366 Swing over bad mm: ø 920 Swing over cross-side mm: 742 Bar work capacity mm: 80 Upper turret Number of tool slots St: 12 Djb E Azyjt Akirsaocg Speed driven tools RPM: 10.000 Drive power driven tools kW: 5,5 / 3,7 (3 mm / cont) Main spindle Speed spindle rpm: 4,000 Drive power spindle kW: 18.5 / 15 (50% ed / cont) Chuck type: BB210 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Tailstock Tailstocktravel mm: 734 Holder: MT5 equipment Chip conveyor Tool measuring arm Foot switch for chuck or collet system Interface for bar feeder

Condition: ready for operation (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 0040000963C, turning length: 500 mm, turning diameter over cross slide: 290 mm, turning diameter: 500 mm, spindle motor power: 14 W, spindle speed (max.): 6,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 550 mm, tool mount: 40 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, torque: 192 Nm, bar passage: 52 mm, total height: 1,850 mm, total length: 4,100 mm, total width: 2,600 mm, overall weight: 4,500 kg, controller manufacturer: Siemens, controller model: SINUMERIK 840D, distance between centers: 700 mm, operating hours of spindle: 6,230 h, Equipment: documentation/manual, rotational speed infinitely variable, Equipment highlights: - 12 driven tool stations - Counter spindle - Permanently integrated Y-axis - VDI30 tool holder - Tool package with rigid holders - Chip conveyor included - Control system: Siemens SINUMERIK 840D - Machine hours: 10,270 h - Spindle hours: 6,230 h Please note: The supplied chuck and tool holders do not correspond to the components currently installed or clamped on the machine. Technical Specifications: General: - Year of manufacture: 2014 - Max. connected load: 30 kVA - Mains voltage: 400 V, 50/60 Hz - Control voltage: 24 V - CE-certified Machining range: - Max. turning diameter: 500 mm - Max. turning diameter in the slide area: 290 mm - Max. turning length: 500 mm - Distance between centers: 700 mm Travel paths: - X-axis: 210 mm - Y-axis: ±40 mm - Z1-axis: 525 mm - Z3-axis: 550 mm Main spindle: - Max. speed: 6000 rpm - Power: 13 / 14 kW - Torque: up to 192 Nm - Spindle bore: 52 (67) mm - Spindle nose: FL 140h5 Counter spindle: - Maximum speed: 6000 rpm - Power: 12.6 / 16.2 kW - Spindle bore: 44.5 mm - Spindle nose: FL 140h5 Dcob E Aswdyh Nszyasg - Spindle nose spacing: 780 mm - Max. workpiece weight (counter spindle): 80 kg Turret & Tools: - Tool holder: VDI30 - 12 tool positions (all driven) Driven tools: - Speed: 5000 rpm - Power: 4.18 kW - Torque: 20 Nm - Tool change time: 0.4 / 0.7 s Travel speeds & accuracy: - Rapid traverse X/Y/Z: 30 / 22.5 / 30 m/min - Resolution XYZ: 0.001 mm - Ball screws: 32x10 mm - Accuracy according to VDI/DGQ 3441: - X/Y/Z: 10 µm (new machine) - Z3: 16 µm (new machine) - Repeatability: 3 µm (new machine) Dimensions: - Transport dimensions (without chip conveyor): 3330 x 1946 x 1829 mm - Overall dimensions (including chip conveyor): 4066 x 2583 x 1829 mm

Condition: reconditioned (used), Year of construction: 1999, Functionality: fully functional, spindle motor power: 7,500 W, spindle speed (min.): 10 rpm, spindle speed (max.): 6,000 rpm, overall weight: 2,750 kg, The Mazak Quick Turn 10 with Fusion 640T control system has been overhauled in the workshop and is in very good condition. Dceb E Azyou Auhaoaog

Condition: refurbished (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 27578101, WFL M30 with Promot gantry loader large tool magazine for 90 tools with turret and subspindle SIEMENS 840C Dceb E Azstr Dtfsyaog Very good condition, was overhauled 10 years ago Price free loaded

Condition: ready for operation (used), Year of construction: 2002, operating hours: 92,000 h, Functionality: fully functional, turning length: 1,097 mm, turning diameter over cross slide: 455 mm, spindle speed (min.): 18 rpm, spindle speed (max.): 3,600 rpm, spindle bore: 107 mm, travel distance X-axis: 320 mm, travel distance Z-axis: 1,097 mm, tool mount: 40 mm, total height: 2,130 mm, total length: 5,560 mm, chuck outer diameter: 315 mm, total width: 2,400 mm, quill stroke: 120 mm, quill diameter: 120 mm, overall weight: 8,900 kg, spindle diameter: 90 mm, We would like to get rid of our CTX500 due to a new purchase. The machine was built in 2002 and has since then done 91,535 hours for our company. The CTX500 is a 2-axis universal lathe with a partial hollow clamping device and has a chip conveyor, a tailstock, a three-jaw chuck SMW KNCS-N 315 and a tool carrier with 12 stations. It is fully functional and without any restrictions as it is and has been serviced at regular intervals. If you are interested, we could inspect the machine during a viewing and carry out a test run as it is still running as a production machine and is therefore under power. A sale would be possible immediately, handover possible in week 19 2025. Here are a few more technical details about the machine: Working area: - Swing diameter over bed track cover 680 mm - Swing diameter over face guide 455 mm - Chuck diameter 250/315 mm - Face stroke 320 mm - Longitudinal stroke 1097 mm Headstock: - Spindle head (flat flange) 220 h5 mm - Spindle diameter in the front bearing 140 mm - Spindle bore 107 mm Main drive: - Power of the three-phase main drive 23 kW - Speed range 18-3600 rpm Tool carrier: - Number of tool stations 12 (Tool holder according to DIN 69880 (VDI 3425) - Cylinder shank diameter 40 mm - Switching time 30° 0.86 sec. 180° 1.62 sec. Tailstock: - Quill diameter 120 mm - Quill holder MK 5 - Quill stroke 120 mm - Quill force max. 1400 daN Hydraulics: - Capacity approx. 30 l Dceb E Asvzy Dtjzyaog - Max. pressure 80 bar - Pressure for clamping device max. 80 bar Coolant device: - Capacity approx. 220 l - Pump output 1.7 kW - Delivery rate at 6 bar 20 l/min Fresh oil lubrication: - Capacity approx. 5 l Electrical connection: - Total connected load approx. 58.5 kVA - Voltage 400 V - Frequency 50 Hz - Fuse (slow) according to VDE 0100 100 A - Permissible voltage fluctuation at 400V (+/-) 10 % Ambient conditions: - Permissible ambient temperature from +15 to +35° C - Max. relative humidity 75 % - Max Installation altitude 1000 m above sea level Weights: - Net weight of the machine without chip conveyor approx. 8700 kg - Gross weight of the machine when transported by truck approx. 8900 kg Dimensions: - Machine with chip conveyor L x W x H approx. 5560 x 2400 x 2130 mm We are of course happy to answer any further questions you may have. Please just contact us.

Condition: used, Year of construction: 1975, - 3-jaw lathe chuck Ø 400 mm - 4-jaw faceplate Ø 600 mm - Grinding attachment Ø 200 mm - Multifix - Change gears - Operating instructions & documentation - Year of manufacture 1975 Working area: - Center height: 300 mm - Swing over bed: 620 mm - Swing in the gap: 800 mm - Swing over the cross slide: 360 mm - Length of gap: 407 mm - Distance between centers: 1000 mm - Max. workpiece weight between centers (without steady rest): 1800 kg Main spindle: - Spindle head: 8 DIN 55022 - Spindle bore: 83 mm - Internal taper: Metric 90 - Center punch: MK5 Tailstock: - Quill stroke: 180 mm - Quill diameter: 85 mm - Quill inner taper: MK5 Clamping fixtures: - Faceplate diameter: 600 mm - Max. chuck diameter: 410 mm Main spindle speeds: - Number of steps: 18 - Range: 14 - 1000 rpm Feed rates: - Lengthwise feed: 0.086 - 4.866 mm/rev (66) - Cross feed: 0.040 - 2.258 mm/rev (66) - Cross slide travel: 375 mm - Top support travel: 210 mm Thread pitches: - Metric threads: 0.5 - 28 mm (66) - Inch threads: 1 - 56 dpi (66) - Modular threads: 0.25 - 14 mm (66) Deb E Ajwdxmqezyascg - Diametrical pitch thread: 2 - 112 dpi (66) Installation: - Motor power: 15 kW - Operating voltage: 400 V - Dimensions W x H x D: approx. 2950 x 1400 x 1400 mm - Weight: approx. 3100 kg

Condition: used, Year of construction: 2020, turning diameter 647.7 mm turning length 1117.6 mm control Haas weight of the machine ca. 11749 kg Dsb E Ajwgi A Uszyaocg

Condition: good (used), Year of construction: 1980, turning dia. 2500 mm, two vertical supports, one side Dcjb Ejwgiwfe Azyaog

Condition: used, Year of construction: 2005, turning length: 380 mm, turning diameter: 400 mm, spindle speed (min.): 60 rpm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, travel distance Y-axis: 60 mm, travel distance Z-axis: 380 mm, bar passage: 45 mm, total height: 1,950 mm, bar diameter: 45 mm, overall weight: 8,500 kg, controller manufacturer: FANUC, controller model: 18 ITB, machining diameter: 400 mm, number of spindles: 2, space requirement length: 3,650 mm, space requirement width: 1,820 mm, CONTROLS .. CNC controls FANUC 18 ITB BASIC FUNCTIONS .. number of spindles: 2 .. number of turrets: 1 .. live positions: yes .. number of c-axes: 1 .. number of y-axes: 1 .. number of b-axes: 1 WORKING RANGE TURNING .. swing diameter (max): 400 mm .. turning diameter (max): 220 mm .. bar diameter (max): 45 mm .. worpiece length max.: 380 mm MAIN SPINDLE .. spindle revolutions (min): 60 /min .. spindle revolutions (max): 5000 /min COUNTER SPINDLE .. drive power: 15 kW X/Z SLIDE .. Z-axis travel: 380 mm .. X-axis travel: 160 mm .. Y-axis travel: 60 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 3650 mm .. space requirements -front/back-: 1820 mm .. total height: 1950 mm .. total weight approx.: 8500 kg Dcob E Ajv Hp Hhjzyasg - Good condition, few operating hours - Operating hours: 47,000h - including equipment such as tool holders and clamping devices - LNS bar loader (optional)

Condition: used, Year of construction: 2004, Functionality: fully functional, CNC lathe Boley with control Siemens sinumberik 802C including all tools and bar feeder 3m Dcjb E Azewginkeyaeg bar diameters up to 20 mm

Condition: used, Year of construction: 2019, TSUGAMI B0386E-III Swiss type lathe WORKING AREA Bar diameter Ø mm 8 – 38 Max part length mm 320 (Direct-driven rotating guide bushing) Max part length mm 70 (Without guide bushing) Max drilling diameter Ø mm 13 Max thread diameter M 12 Max chuck diameter for sub spindle Ø mm 38 Max drilling diameter for sub spindle Ø mm 12 Max thread diameter for sub spindle M 12 Max drilling diameter for driven tools Ø mm 10 Max thread diameter for driven tools M 8 Max diameter T-slot cutter (driven tool) Ø mm 45 CAPACITY Max spindle speed main spindle rpm 6000 Max spindle speed sub spindle rpm 7000 Max spindle speed rotating guide bushing rpm 6000 Max spindle speed tool spindle rpm 5000 Dcobov Ipuzs E Azyaeg Number of tool positions pcs 29 Tool size mm 16x16x125, 20x20x125 Rapid traverse speed m/min 32 (Z2, X2) 24 (X1, Y1, Z1, Y2) MOTORS Main spindle kW 11 / 7.5 Sub spindle kW 5.5 / 3.7 Driven tools kW 1.4 (1.0 for cross-drilling units front tool post) Y2 kW 0.5 X1, Y1, Z1, X2, Z2 kW 0.75 Coolant pump kW 0.4 Lubricating oil pump W 3 CONTROL SYSTEM FANUC 32i-B Controlled axes (including C-axes) pcs 8 X1, Z1, Y1, X2, Z2, Y2, C1, C2 LCD / MDI 10.4” color LCD OTHER Coolant tank L 190 Length x width x height mm 2240 x 1515 x 2050 Net weight kg 4950 Power requirement KVA 22.5 EQUIPMENT: Fanuc 32i-B control system with 8 controlled axes (X1, Z1, Y1, X2, Z2, Y2, C1, C2) Cross drilling unit with 4 spindles C-axis for main spindle and sub spindle Automatic programming software Abile Tool height compensation function Tool counter Screen for periodic maintenance Door lock Coolant level detector Spindle cooler Standard tools Retractable coolant nozzle Brake for the main spindle MACHINE PRICE: TSUGAMI B0386E-III (8 controlled axes) OPTIONS INCLUDED IN THE MACHINE PRICE: Tool set gauge O.D. Included Signal tower 3-step Included Work lighting LED Included Bar interface Included High-pressure pump (1.5 kW, 20 bar, 18 l/min) Included Rear drive unit (rear drive, 1.4 kW) Included Brake for sub spindle Included Direct-driven rotating guide bushing (Tsugami 2621-1234) Included Adapted for water-based cutting fluid (water type coolant specification) Included Oil blowing with M code (X-axis front 1, X-axis rear, Z2) Included Adapter for main spindle (Shaublin F37) and sub spindle (Shaublin F37) Automatic power off Included Air blowing for main spindle, sub spindle, and cross drilling unit 2 years Fanuc warranty (from shipment) Transformer, Operator manual, Compliance with European requirements including CE marking Drill set gauge I.D. (Long, Middle, Short) Detail ejector front with oil blowing (stroke 147, max work length 106 mm) Part conveyor with part separator (chute width 135, belt width 90) Rigid tapping also for rotating tools (cross drill, rear drive, back drive) 3 tool spindles for rear drive ER16, max 5000 rpm (tool spindle for rear drive) 4 tool spindles for back tool post (3282-Y041) 4 back adapters (dia 25 fixed tool) Guide bush adapter (Dunner CJ9) Guide-bushless kit incl stopper Chip conveyor (flat type) 10.4” color screen Included Minimum input increment (0.0005mm for X1 & X2, 0.001 mm for other axes) Included Linear interpolation Included Circular interpolation Included G04 Dwell (delay) 0-99999.99 Included Absolute/Incremental programming (X, Z, Y, C absolute / U, W, V and H incremental) Included Number of tool offsets: 99 Included Program memory: 64 kB (80 m perforation tape) Included Num...

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, TECHNICAL DETAILS: CNC Control: MAZATROL 640 T X-axis mm: X-axis mm: 190 Z-axis mm: Z-axis mm: 515 Y-axis mm: Y-axis mm: - Maximum Turning Diameter mm: / Max. Turning Diameter mm: 350 Cº Axis Increase: - Maximum Turning Length: Max. Turning Length mm 515 Cutting feedrate mm / min X, Z, Y: Cutting feedrate mm / min X, Z, Y Swing over bed mm: Ø 575 Swing over slide mm: Over cross slide mm: Ø 510 Bar work capacity mm: Ø 77 Rapid traverse max. mm / min X, Z, Y: Rapid traverse max. mm / min X, Z, Y: 30,000 / 33,000 Main Spindle L-SPINDLE 250 mm Spindle speed rpm: Spindle speed rpm: 35 - 4,000 Spindle power kW: Spindle power kW: 26 Torque Nm: Torque Nm: - Spindle bore Main mm - Spindle nose Main A2-6 Turret Positions Upper Turret Positions: 12 Number of rotating tool stations (Each turret): 12 Rotating tool speed: Rotary Tool power: EQUIPMENT: Chip Conveyor Cooling System Turret Plate 250mm - Chuck 250mm Counter point - Tailstock MACHINE DIMENSIONS: Length mm / Length mm: 3,500 Width mm / Width mm: 1,700 Height mm / Height mm: 2,000 Deb E Azswdwmpsyajcg Weight kg / Weight kg: 6,000

Condition: excellent (used), Year of construction: 2015, Twin Spindle CNC Turning Centre Goodway GTZ-2600Y Year of manufacture 2015 First installed at the end customer in 2018 Siemens 828D CNC Control 8 controlled Axes Turning diameter 250 mm. Turning length 600 mm. Main spindle: Bar capacity 65 mm. Spindle drive motor rating 11 KW. Spindle speeds to 4000 rpm. C-Axis 0.001°. Back Spindle: Bar capacity 65 mm. Spindle drive motor rating 11 KW. Spindle speeds to 4000 rpm. C-Axis 0.001°. Back spindle longitudinal travel B: 690 mm. Tool turret I 16-station Driven tool positions (possible) 16 Dcob E Azyshf T N Soaog Tool drive motor rating 3.7/5.5 KW Tool speeds 6000 rpm. Cross travel X1 : 195 mm Longitudinal travel Z1: 620 mm. Vertical travel Y: +/- 50 mm (for off centre operations). Tool turret II 16-station Driven tool positions (possible) 16 Tool drive motor rating 3.7/5.5 KW Tool speeds 6000 rpm. Cross travel X2 : 210 mm Longitudinal travel Z2: 620 mm. Complete weight approx. 11000 kg Length 4445 mm Width 2555 mm Height 2360 mm Power supply required 65 KVA Complete with: 3-jaw chuck. Hainbuch collet chuck. Renishaw tool measurement for both turrets. Tool holder package. Coolant system,. High pressure coolant pumps made by Grundfos 30 bar. Chip conveyor. LNS Alpha short bar magazine.

Condition: good (used), Year of construction: 1990, Functionality: fully functional, Center high 290 mm Between centers 1000 mm Swing dia over bed 580 mm Swind dia over cross slide 380 mm X travel 295 mm Travel of hand slide 135 mm Spindle speed 20-2000 rpm (21 ranges) Dcob E Aowdvmzszyajg Motor power 7,5/11 kW Spindle hole D70 mm Spindle nose DIN55027 (8-er) Tailstock sleeve MT5 Feedrate longitudinal 0,04-12 mm/rev. (120 ranges) Feedrate cross 0,02-6 mm/rev. (120 ranges) Weight cca 2860 Kgs Accessories - Steady rest - Following rest - Faceplate - 3 jaws chuck - Machine working light - Rapid feed

Condition: good (used), Internal Article No.: 25013 Lead and Feed Lathe Nardini MS 175E Year of Manufacture: 1986 The machine is equipped as follows: - Multifix base holder including 2 tool holders - MT3 drill chuck - 2 live center centers - Operating instructions / electrical diagram - 185E collet chuck, including one collet - 2 lynette chucks - Chuck flange - 6 machine feet Technical specifications: Center distance: 800 mm Center height: 175 mm Tailstock mount: MT3 Quill stroke, tailstock: 130 mm Total power requirement: 4.8 kW (380 V / 16 A) Djbjwdu R Se E Azyascg Spindle head mount: DIN 55022 / Size 5 Spindle bore: 46 mm Speed range: 25 - 2000 rpm. Bed width: 220mm Dimensions (LxWxH): 220 x 150 x 120cm Weight: approx. 1000kg The machine is fully functional and can be inspected with power on by prior arrangement.

Condition: good (used), Functionality: fully functional, . Technical data : Tip height 110 mm Center width 160 mm Spindle bore 23 mm . 3 speed ranges , approx. 0.65 kW , speed 1 700 rpm 1.0 kW , speed 2 1420 rpm 1.3 kW , speed 3 2880 rpm . - Cross support and 4-fold stops Dceb E Azyswduwlsajg - Tilting tailstock with 2 quills, with electric reversal of direction of rotation for - Thread cutting device .

Condition: used, Year of construction: 1997, - 4-jaw faceplate Ø 550 mm - 3-jaw lathe chuck Ø 310 mm incl. 4 sets of hard base jaws, 1 set of hard top jaws, 8 sets of soft top jaws - Fixed steady rest - rotating center point MK5 - Mulifix B quick-change holder incl. 10 tool holders - Switch-on time 32582 h - Year of manufacture 1997 - incl. operating instructions and technical documentation Dcob E Azysr Hrq Djajg Technical data: Working range: - Tip width: 1000 mm - Center height: 280 mm - Circumferential diameter over bed: 570 mm - Circumferential diameter over facing slide: 340 mm - Bed width: 350 mm - Movement of the facing slide: 340 mm - Movement of the top support: 140 mm - Slide gate length: 700 mm - Slide width: 220 mm - Bed slide guide length: 560 mm - Turning tool cross-section (height/width): 32 x 25 mm Turning spindle: - Spindle head according to DIN 55027: size 8 - Spindle diameter in front bearing: 100 mm - Spindle bore: 66 mm - Inner taper of the main spindle: metr. 70 Main drive: - Drive power 60% / 100% ED: 15 / 11 kW - Max. Torque at the turning spindle: 1600 Nm - Total speed range: 1 - 2500 rpm - Speed range gear stage I: 1 - 625 rpm - Speed range gear stage II: 4 - 2500 rpm Feed drive: - Type: Three-phase servo drives - Feed range longitudinal and planar: 0 - 10 mm/rev - Feed force longitudinal: 9000 N - Feed force planar: 7000 N - Input speed longitudinal/plane: 7 / 3.5 m/min Tailstock: - Quill diameter: 70 mm - Quill stroke: 160 mm - Inner taper of the quill: MK5 Thread cutting range: - Metric threads: 0.1 - 250 mm - Inch thread: 1/4 - 56 G/1" - Module thread: 0.125 - 28 - DP thread: 1 - 224 Machine dimensions: - Dimensions WxHxD: 2850 x 1750 x 1815 mm - Weight of the machine: 2950 kg

Year of construction: 1995, Condition: excellent (used), Numerical control lathe SOMAB MOD. OPTIMAB 400 Year of construction 1995 "CE". Used in excellent conditions. Dceb E Azshuapgeyaog Turning length 1000 mm. Turning diameter on guides mm 400. Turning diameter above the slide mm 220. CNC NUM Mod.Somab PL+S3. Spindle hole: mm 43. Spindle speed : Rpm 80 - 4500 Motorized turret : nr. 12 positions. Weight : Kg 6000 Installed power : Kw 25 Machine dimensions (without chip conveyor): mm 2750 x 1805 x 2085. Chips evacuation device supplied. Turret tools supplied.

Condition: good (used), Year of construction: 2009, operating hours: 9,400 h, CNC lathe with C-axis, driven tools + Y-axis + handling DMG - Gildemeister CTX Alpha 500 Siemens 840D sl ShopTurn control Rotation diameter over bed: 500 mm Rotation diameter over support: 290 mm Turning diameter for shafts: 200 mm Turning length: max. 500 mm Travel distances: X 190 mm Y +/- 40 mm Z 525 mm Rapid traverse: X,Z 30,000 mm/min. Y 22,500 mm/min. Spindle nose: 150h5 Spindle bearing diameter: 100 mm Bar capacity: 51 mm Spindle drive power: 20/27 kW Spindle speed: max. 6,000 rpm Spindle torque: max. 170 Nm C-axis: C-axis 0.001° Chuck diameter: 210 mm Tool turret positions: 12 Driven tool positions: 12 Tool holder: VDI 30 Tool drive power: 5.4 kW Tool speeds: 5,000 rpm Tool torque: max. 18 Nm Automatic tailstock travel: 550 mm Automation/handling system for portal parts: Huber - 3-axis Machine weight: max. 4,650 kg Accessories: C-axis and driven tools. Y-axis for off-center milling/drilling operations. 12-position tool turret. Automatic tailstock. Chip conveyor. Tool package. Dcob Eerx R N Ij Azyaog Automation - HUBER 3-axis gantry parts handling system. With parts magazine. Good condition. 9400 program runtime hours. Offer number L-4860

Condition: excellent (used), BREDA BRF 150 X 800 mm Parallel Lathe Machine from school closure. Very good condition, ready to 'use. Height of centers: 150 mm Distance between centers: 800 mm Turning diameter on the carriage: 185 mm Self-centering chuck with 3 jaws : Diam. 160 mm Dobjif Rrzo E Azyascg Rotational speed: 47 - 1440 Rpm Bar passage: 42 mm Tool turret included Bench width: 260 mm Tailstock attachment: C.M.3 Bezels supplied 4-jaw plateau supplied Tailstock supplied

Condition: good (used), Year of construction: 2005, CNC double spindle lathe Emco Hyperturn 665 MC Plus Year of manufacture 2005 Dcsb E Azsvpun Nsyajg Siemens Sinumerik 840D Swing diameter over bed: 600 mm Swing diameter over support: 500 mm Turning diameter: max. 430 mm Turning length: max. 744 mm Distance between spindles: max. 975 mm Travel paths of the upper support: X1/Z1 280/750 mm Travel paths of the lower support: X2/Z2 205/705 mm Counter spindle longitudinal travel: Z3 750 mm Rapid traverse: X1/X2 24,000 mm/min. Z1/Z2 30,000 mm/min. C1/C2 1,000 rpm. Main spindle:: Spindle nose: DIN-55026 KK 6 Spindle bore: 73 mm Bar capacity: 65 mm Spindle drive power: 29 kW AC Spindle speeds: 0 - 5,000 rpm. Spindle torque: max. 250 Nm Spindle indexing: C 0.001° degrees Counter spindle:: Spindle nose: DIN-55026 KK 6 Spindle bearing diameter: 85 mm Spindle drive power: 17/22 kW AC Spindle speeds: 0 - 7,000 rpm. Spindle torque: max. 130 Nm Spindle indexing: C 0.001° degrees Upper tool turret: Tool turret positions/driven: 12/12 Tool holder: VDI 30 Tool drive power: 6.7 kW Tool speeds: 0 - 4,000 rpm. Tool torque: max. 25 Nm Lower tool turret: Tool turret positions/driven: 12/12 Tool holder: VDI 30 Tool drive power: 6.7 kW Tool speeds: 0 - 4,000 rpm. Tool torque: max. 25 Nm Machine weight: approx. 7,600 kg Machine dimensions: LxWxH, approx. 3,400 x 2,550 x 2,300 mm Accessories: 6-axis, CNC double spindle, double turret, turning center. 2 x spindles with C-axis. 2 x tool turret with driven tools. Main spindle with collet chuck for 65 mm bars. Counter spindle with 3-jaw chuck. Bar loading magazine. Part catcher. Finished part conveyor. Chip conveyor. Large amount of tools included! Condition: Should be in very good condition. 2 x machines available! Offer number L-4892 + L-4893

Condition: good (used), Year of construction: 2012, S&T ST-40/55 VC Vertical Turning & Milling 2012 Fanuc 31i CNC Table diameter 4000 mm Turning diameter 5500 mm Turning height 2600 mm Table drive motor 60/75 KW Table speeds 60 rpm C-Axis 0.001° Milling spindle motor 22/26 KW Deb E Azsm Shcreyaocg Milling spindle speeds 1500 rpm 16 station tool changer Proposal Number V(K)-6833

Condition: excellent (used), Year of construction: 1989, Very good condition Conventional VTL for sale from end user / factory Morando (Italy) Model VS 12 Built 1989 DRO digital readout Hydraulic clamping chuck diameter 1200 mm Table load capacity max. 7.5 t (7500 kgs.) Turning diameter max. 1400 mm Turning height max. 1000 mm Left ram vertical travel 1000 mm. Swivel range +/- 25° Right ram (5 position turret) vertical travel 760 mm. Swivel range +/- 25° Table drive motor 37 KW Table speeds 4.5 - 252 rpm Conical turning Dob E Azovy Dwzoyaecg Chip conveyor Chip and splash guards Weight 20 t. Very good condition and can be inspected under power. Proposal Number V(K)-7032

Condition: excellent (used), Year of construction: 1991, CNC vertical lathe with tool changer Dörries Scharmann VCE 1600/140 SM Contumat 2 Year of construction 1991/retrofit Dobjtx Au Ho E Azyascg Siemens 828D (retrofit) Faceplate diameter: 1,400 mm Face plate load: max. 9,000 kg Swing diameter: max. 1,750 (1,890 with open door) mm Turning diameter: max. 1,600 (1,750 currently turned) mm Turning height: max. 1,500 mm Plunger input bore: min. 340 mm Number of rams: 1 Ram cross travel: X 1,900 (+/- 950) mm ram vertical travel: Z 1,000 mm Cutting feeds: 0.1 - 6,000 mm/min. 0.01 - 500 mm/rev. Rapid traverse: X,Z 8,000 mm/min. Crossbeam vertical travel: 900 (9 x 100) mm Crossbeam speed: 425 mm/min. Table drive power: 69 kW Table speeds: 0 - 315 rpm. Gear stage: I 2.8 - 78.75 rpm. Gear stage: II 11.2 - 315 rpm. Torque on faceplate: max. 40,000 Nm Automatic tool changer: Tool magazine positions: 20 Tool radius: max. 200 mm Tool length: max. 675 mm Accessories: Large tool pack; Large spare parts package; Large package of clamping jaws; Full cladding; Chip conveyor; Coolant system; New coolant and flood coolant pumps. Condition: Very good condition. The mechanical condition is very good. Completely new electrics and Siemens 828D Siemens ONE system. The machine works with very high accuracy. Offer number V(K)-6899

Condition: excellent (used), Year of construction: 1995, turning height: 3,200 mm, turning diameter: 3,300 mm, feed length Z-axis: 1,700 mm, faceplate diameter: 3,000 mm, rapid traverse X-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, spindle speed (min.): 10 rpm, spindle speed (max.): 2,000 rpm, year of last overhaul: 2020, CNC vertical lathe with C-axis + milling spindle Doerries Scharmann VC-3500/300 year of construction 1995 Fanuc 18iTB Faceplate diameter: 3,000 mm Faceplate load: max. 50,000 kg Turning diameter: max. 3,300 mm Turning height: max. 3,200 mm Travel distances: X -2,550 / +2,550 mm Z 1,700 mm Crossbeam vertical travel: W 1,800 mm Support sleeve size: 250 x 250 mm Dcob E Azyjqy Nmajasg Rapid traverse: X/Z 6,000 mm/min. Table drive power: 105 kW Table speeds: 0.6 - 110 rpm. Torque at table: max. 140,000 Nm C-axis: 0.001° Tool magazine positions: max. 27 Driven positions: max. 17 Milling spindle speeds: 10 - 2,000 rpm Milling spindle drive power: 22 kW Tool holder: BT50 Accessories: Extended + retrofitted Retrofit + update/extension 2020 Condition: Very good Offer number V(K)-6834