Used decanter for sale (55)

Condition: like new (used), Year of construction: 2019, operating hours: 300 h, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Gjlhcozgq Szocqqsbt Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation

Condition: excellent (used), Year of construction: 2016, operating hours: 500 h, functionality: fully functional, System: Decanter centrifuge as a mobile, fully equipped dewatering unit housed in a container Condition: Used/demo machine, only 500 operating hours Type: Flottweg Z3E-4/451 Year of manufacture: 2018 Max. bowl speed: 5250 rpm Gelhccjy Avtfjqqsbt Standard wear protection: 8° cone Differential: 1.5–29 min-1 Torque: 2750 Nm System: The "all-purpose" Flottweg Z3E-4/451 is a high-performance two-phase decanter, designed for the separation of solids and liquids. ROBUST DESIGN for separating various types of sludge, such as manure, digestate, industrial sludge, wastewater treatment plant sludge and more.

Condition: excellent (used), PIERALISI Centrifugal Decanter – Stainless Steel PIERALISI industrial centrifugal decanter, designed for the continuous solid-liquid separation of products and suspensions using centrifugal force in industrial processes within the food industry. The equipment uses a high-speed horizontal drum with an internal screw conveyor, allowing for the continuous separation of phases with different densities. The solids are transported to the discharge area while the separated liquid phase is continuously evacuated. Its industrial construction in stainless steel, continuous operation, and compact design make this decanter a particularly interesting solution for processes that require clarification, separation, concentration, or solid recovery. MAIN FEATURES -Manufacturer: PIERALISI -Type: Horizontal centrifugal decanter -Application: Solid-liquid separation -Separation process using centrifugal force -Rotating horizontal drum -Internal screw conveyor for solid transport -Continuous separation and discharge -Continuous industrial operation -Construction primarily in stainless steel -Motorized drive -Protected work areas -Robust design for industrial use -Integrable into existing processing lines -Suitable for clarification and concentration processes PROCESS The PIERALISI decanter is designed to continuously separate components of different densities present in a pumpable product. The product enters the rotating drum, where the high centrifugal force causes the phases to separate. The denser solid components move towards the drum wall and are transported by the screw conveyor to the discharge, while the separated liquid phase is continuously evacuated. This principle allows for the following operations: Solid-liquid separation Clarification Solid concentration Dehydration Product recovery Separation of pulps and suspensions APPLICATIONS Especially suitable for food industries, fruit and vegetable processors, oils, juices, and other liquid products with suspended solids, depending on the equipment configuration. PIERALISI centrifugal decanters can be integrated with feed pumps, tanks, filtration systems, clarification systems, and other separation or processing stages. Its continuous operation allows it to be incorporated as either a stand-alone unit or within a complete industrial line. Machine available for inspection. Gbolhezxcbfeccqqet Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), Year of construction: 2020, System: 2-phase centrifuge, dewatering system in a double-deck container Manufacturer: Hiller Type: DP45N.422 VA HY Mach. No.: H6138 Year of manufacture: 2020 System: in a double-deck container, conveyor technology with side swivel conveyor, separate pump technology. System: demonstration system - as good as NEW! Maximum permissible speed: 3500 l/min Permissible Density: 1.3 kg/m3 Gbelhccqov D Rlyjqot Inner diameter of drum: approx. 450 mm Material: All parts in contact with the media made of duplex steel Drum material: 1.4470 Drum wall thickness: 11 mm Max. operating pressure: 100 mbar Drum drive: size 200L Power: 30 kW Speed: 3000 rpm V/Hz: 400V, 50 Hz Hydraulic unit: PVRK07521L Power: 7.5 kW Control: FU Seepex pump: concentrate pump MD 006-12, see photos Macerator: Vogelsang, type RotaCut, RCQ-26G inline cyclone, BioCut and RCQ-33G inline cyclone see photos Spiral conveyor: Hiller see photos Polymer plant: GVU Technik Polymer Mix Station - technical data see photos Documentation: complete

Condition: used, Year of construction: 2018, System: Decanter Type: Flottweg C4E-4/454 Complete dewatering system in container Year of construction: 2018 Sludge throughput: approx. 0-40m3/h Solids capacity: max. 1.2 TS/h Equipment: front double door, side entrance door, fan heater, lighting, sockets, etc. Rotor: max. speed 3650 min-1 Drum diameter: 470 mm System: Container system Interchangeable bridge system for accommodating the downstream system components. Piped and wired ready for operation as a functioning unit. Container system design: Stand construction, clad with sandwich panels and holders for transportation with interchangeable bridge systems. Accessories: FHM preparation station PolyMix 4000SP, measuring equipment, switchgear Gbolhcju R Icmecqqst Feed pump: Seepex BN 52-6LS Discharge conveyor: SS D320 double trough spiral conveyor Dimensions: L 7820mm x W 2500 mm x H 3880 mm Empty weight: 14500 kg Weight in operation: 15000kg Voltage: 400V Power consumption: 142 A Power consumption max.: 70kW Fuse protection: 250 A Frequency: 50 Hz Sludge inlet: DN 100 Centrate drain: DN200 Solids discharge: Spiral conveyor Further information: see photos

Condition: used, System Decanter used Gelhcswtckljcqqsbt Type Guinard D3LLC-30B HP Machine number 3806 Year of manufacture 2003 Speed 3500-4000 rpm. Drum diameter 340 mm Service If you have individual requests, please contact us. We are your specialist in sludge dewatering with over 40 years of experience.

Condition: used, Year of construction: 2007, System: Mobile sludge dewatering system, mobile decanter/centrifuge Manufacturer: Hiller Model: Solid bowl screw centrifuge Type: DP51 Mach. no.: H3991 Year of manufacture: 2007 Gbelhccqevz Dnpsqot Maximum drum speed: 3400 l/min Drum inner diameter: approx. 505 mm Drum material: ST52.0 Drum wall thickness: 13.0 mm Other: Steel exchange case with reinforced base, Accessories: Pump for sludge inlet, flocculant suction pump, flocculant solution pump Flocculant station: 2 chamber system for liquid polymers with agitator, adjustable Double shaft paddle mixer: galvanized steel Total weight: approx. 4200 kg Purchase and rental possible.

Condition: good (used), Year of construction: 2019, Pieralisi FP600 RS-M decanter centrifuge, 2-phase decanter centrifuge, 15 kW drive, max. drum speed 4100 rpm, equipped with backdrive with 7.5 kW drive, scraper for solids with 0.25 kW drive, product temperature min. 5 °C and max. 100 °C, excl. switch box, incl. stainless steel control box, dimensions 2550 x 1050 x 1390 mm (lxwxh), weight 1510 kg, including various spare parts Gbjlhccoy Uvp Doqqjt

Year of construction: 2008, condition: used, Plant: Decanter Type: Hiller DP51-422 Year of manufacture:2008 Machine number: H4231 Bowl material: 1.4470 Total weight: 4350 kg Gelhcspptxdjcqqobt Max. Drum speed: 3400 1/min Max. operating speed: 3300 1/min Inner drum diameter: 505 mm Drum wall thickness: 13.0 mm Separation technology: sludge dewatering by means of decanter centrifuges (solid bowl centrifuges, decanters). The high centrifugal forces separate the fine solids from the suspension due to different densities.

Year of construction: 2007, condition: used, Plant: Mobile sludge dewatering plant, decanter / centrifuge mobile Manufacturer:Hiller Model: Solid bowl screw centrifuge Type: DP51 Machine No.: H3991 Year of construction: 2007 Maximum permissible: Drum speed 3400 I/min Inner diameter of bowl: approx. 505 mm Reel material: ST52,0 drum wall thickness:13,0 mm Other: steel exchange case with reinforced bottom, Accessories: pump for sludge inlet, flocculant suction pump, flocculant discharge pump Gbelhjppucaoccqqjt Flocculant station: 2 chamber system for liquid polymers with agitator , adjustable Double shaft paddle mixer: galvanized steel Total mass: approx. 4200 kg Purchase and rent possible.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, inner diameter: 365 mm, wall thickness: 10 mm, rotational speed (max.): 2,900 rpm, The GEA Westfalia Separator CA 365-03-00 is a high-performance, three-phase decanter designed for the efficient separation of liquids and solids. With a drum diameter of 354 mm and an extended drum length, this model offers optimized separation performance. DRUM AND HOUSING DESIGN The decanter drum is configured in a flat-cone design, enabling effective phase separation. The housing is manufactured in a standard design, facilitating integration into existing systems. LIQUID DISCHARGE Gbolhccjy H Ixueqqet Liquids are discharged with the light phase unpressurized and the heavy phase under pressure. This functionality ensures reliable and continuous removal of the separated phases. DRIVE TYPES The drum is driven via a belt drive, while the screw is driven by a gearbox. These drive types provide stable and efficient decanter operation. The GEA Westfalia Separator CA 365-03-00 provides a reliable solution for the separation of liquids and solids in various applications. plus GEA WESTFALIA SAMR 5036 CENTRIFUGE CLARIFIER FOR A COMPLETE LINE FOR OILS. The units can be sold separately or as a complete line. ?v=nv23KAJFewE

Condition: used, Year of construction: 2005, Name: Sludge dewatering centrifuge used Manufacturer: Huber Type: RoD 1500 Year built: 2005 Driving force: 18,5 kW Throughput m³/h: 12 m3/h Permissible sediment density: 1,2 kg/dm³ Max. bowl speed: 4000 rpm Inner diameter drum: 365 mm Material: Stainless steel Dimensions: L 2800 x W 1000 x H 1100 mm Empty weight: 3000 kg Gbolhcjy Edfbocqqst Technical doc.: Yes Message: Immediate availability, Worm drive: Viscotherm Rododiff 10715, Hydraulics B/C 7.5 -16 Z HP Accessories: Control cabinet and a hydraulic system Condition: Second hand Price: On demand

Condition: used, Year of construction: 1996, System: Decanter / Centrifuge used Type: KHD CP3074 Year of manufacture: 1996 Machine No.: 5695 Speed: 2850 rpm Gbolhccqew Thi Ejqet Drum diameter: 670 mm Drum wall thickness: 17 mm Drum material: TSt E690V/St 52-3 Max. filling volume: 530 dm3 Max. operating pressure: 1 bar Weight: 11 t Separation technology: Sludge dewatering by decanter centrifuges (solid bowl screw centrifuges, decanters). The high centrifugal forces separate the fine solids from the suspension based on their differing densities.

Condition: used, System: Tricanter, 3-phase decanter, three-phase centrifuge Flottweg Z4D-4/441, used Year of manufacture: 1998 Bowl diameter: approx. 420 mm Max. rotational speed: 3500 rpm Sediment density: 1.8 kg/dm³ Application: This powerful Flottweg three-phase decanter centrifuge is specifically designed for the continuous separation of solids and two liquid phases. Compared to standard decanters, this system offers significantly enhanced process capabilities, particularly when handling complex media. System: Complete skid-mounted unit Equipment: Flottweg three-phase decanter Gbslhcsy Eyf Docqqet - electric drive unit - pump system - piping & valves - maintenance platform - complete skid assembly Typical applications: Oil/water separation - food industry (e.g. vegetable oils) - chemical industry - recycling & environmental technology - emulsion and sludge treatment

Condition: used, Year of construction: 1993, System: Decanter Type: KHD CP 3-0.1 Year of manufacture: 1993 Machine no.: 5303 Speed: 3200 1/min Drum diameter: 530 mm Drum wall thickness: 12.5 mm Drum material: H2 Gelhcjv A Shgecqqsbt Separation technology: Sludge dewatering using decanting centrifuges (solid bowl screw centrifuges, decanters). The high centrifugal forces separate the fine solids from the suspension due to different densities.

Year of construction: 2002, condition: used, Plant: Used decanter / centrifuge mobile Manufacturer: Hiller Model: Solid bowl screw centrifuge Type: DP45-422 Decapress Machine No.: 2884 Year of construction: 2002 Maximum drum speed: 3800 I/min Inner diameter of bowl: approx. 450 mm Drum material: HII/St52 Electric motor: 30 kW Total mass: approx. 3650 kg Gbslsppt Sfshccqqjt Purchase and rent possible.

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Gjlspu A D Ashccqqjbt Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Machine signal: 02-001 Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Condition: excellent (used), System: Decanter / centrifuge dewatering system Manufacturer: Hiller Model: demonstration machine System: Dewatering system as a compact system as a ready-to-connect, operational unit mounted on a platform. Design: Changeable rack as a bridge with frame structure made of galvanized steel, plug-and-play integration into ongoing operation Type: DP45N Mach. no.: on request Year of manufacture: 2018 Throughput: up to max. 20 m3/h Max. Speed: 3500 I/min Acceleration: 3063 x g Drum inner diameter: approx. 450 mm Parts in contact with the product: stainless steel Gbolhccqeppt Iboqet Parts not in contact with the product: steel Drum length: 1948 mm Drum material: 1.4392 Screw material: 1.4404/1.4408 Construction: Centrifuge base frame made of steel with foot and support plates for holding and raising the centrifuge Central discharge: with compensator Central chute: incl. central control: Pipe for product-contacting lines: made of stainless steel Electrical engineering; Hiller-VA / Rittal switchgear wired Automation device Siemens S7 Dimensions: approx. 5550x2150x2100 mm (LxWxH) Transport weight: 7500 kg OTHER: This system is available twice

Year of construction: 2002, condition: used, Machine No..3236 Gelhceppdd Secqqebt Speed: 3000/3200 rpm. Drum diameter: 520 mm

Condition: good (used), Year of construction: 1997, Name: Flottweg decanter centrifuge Manufacturer: Flottweg Type: Z4D-3 / 454 Year built: 1997 Permissible sediment density: 1,5 kg/dm3 Max. bowl speed: 4.000 rpm Gelhccezp D U Usqqebt Inner diameter drum: 420 / 226 mm Material: Stainless steel Max. operating temperature: 100 C° Empty weight: Approx. 3.000 kg Technical doc.: Yes Accessories: A control cabinet, a hydraulic system Condition: Used-good Price: By request

Condition: used, Year of construction: 2001, inner diameter: 450 mm, wall thickness: 11 mm, overall weight: 3,200 kg, System: Decanter / centrifuge, used Manufacturer: Hiller Model: DP45-422 Mach. No.: 2818 Year of manufacture: 2001 Maximum drum speed: 3800 l/min Drum inner diameter: approx. 450 mm Drum wall thickness: 11.0 Gslhccsvz A Uzsqqsbt Drum material: H2/ST52 Weight: approx. 3200 kg Permissible density 1.50 kg/dm3

Year of construction: 2018, condition: used, Solid bowl screw centrifuge max. speed. 2200 min-1 Gelhoppa S Ajccqqjbt

Condition: used, System: Used decanter / centrifuge Type: KHD S 3-02 Factory number: 9-8531-0-2570 Machine number: 5389 Permissible speed: 2550 Permissible density kg/dm³: 1.3 Drum inside diameter: 650 Drum inside height: 1970 mm Drum wall thickness: 16 mm Drive: Viscotherm hydraulics Material: steel Year of construction: 1994 Gbelhccqjvz Ic Rsqot Total weight: 4400 kg Width: 1960 mm Length: 3630 mm Height: 1300 mm Other: Purchase and rental possible Optional soundproof housing The system is in good condition.

Condition: used, Plant: Mobile sludge dewatering plant, decanter / centrifuge mobile Manufacturer: Hiller Model: Solid bowl screw centrifuge Type: DP45-422 Machine No.: H3480 Year of construction: 2006 Maximum permissible: Drum speed 3800 I/min Inner diameter: Drum 450 mm Drum material: H2/St52 Electric motor: yes Other: steel exchange case with reinforced bottom, accessories: pump for sludge inlet, flocculant suction pump, flocculant release pump Flocculant station 2 chamber system for liquid polymers with agitator , adjustable Golhjppddyjccqqsbt Double shaft paddle mixer galvanized steel Total mass : approx. 3200 kg Purchase and rent : possible.

Year of construction: 2001, condition: excellent (used), Westfalia Decanter Manufacturer: GEA Westfalia Separator AG Type: CA 365-010 Gbelhcod Rwwxocqqet Year of manufacture: 1978 Drum speed: 3,300 rpm Last operational until: 2004 Application area: Used in the production of base oils for the removal of solid particles. The decanter was decommissioned after a production change in 2004 and is therefore fully functional.