Condition: excellent (used), Year of construction: 2014, USED HANKOOK VTC140E – YOM 2014 – Serial Number 44L09842 - TWW Cat 7962 MACHINE CONSTRUCTION & FEATURES • Ram Type Vertical Boring & Turning Machine with C-Axis & Driven Tools. • Heavy-Duty Cast-Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Hardened & Ground Slideways to Provide Increased Stability & Rigidity. • 2 Step Automatic Gear Change. • 24 Position Tool Magazine. INCLUDED FACTORY FITTED MACHINE OPTIONS • Chip Conveyor & Chip Bucket • 30 Bar Through Spindle Coolant System • Measurement System C-Axis Scale • Transformer • Hydraulic 3-Jaw & Manual 4-Jaw Combination Chuck With4 Manual Adjustable Jaw Bodies • Automatic Tool Setting Device Djb Esuu Rz Sjt Efnscg TOOLING INCLUDED • DINE Tool-changeable Angular Milling Head with 40 ISO Output • 2 Off Sandvik Capto C6 Turning Toolholders with Two Outputs (V & H) • 1 Off Sandvik Capto C6 Axial Turning Head • 7 OFF BT50 Driven Toolholders • 1 Off Hankook TA12B4121015043 • 1 OFF Hankook TA12B412015142 • 1 Off Hankook TA12410000161 • 2 OFF Hankook TA12417010160 CAPACITY Maximum Turning Diameter - Ø 1,600 mm Maximum Turning Height - 1,400 mm Maximum Torque - 17,885 Nm Maximum Cutting Force - 3,000 kgf Maximum Workpiece Weight - 8,000 kg TABLE Table Diameter - Ø 1,400 mm Table Speed - 0.9 ~ 360 RPM Table Speed Range - Automatic 2 Step TABLE C-AXIS Minimum Index Angle - 0.001° C-Axis Cutting Feedrate - 0 ~ 1,200 Deg / Min Max. C-Axis Speed - 3.333 RPM RAM HEAD Tool Size - 32 mm² Spindle Taper - ISO 7/24 #50 Ram Cross Section - 220 x 220 mm MILLING SPINDLE Milling Spindle Speed - 30 ~ 3,000 RPM Max. Milling Spindle Torque - 235 Nm TRAVEL & FEEDRATE X-Axis Travel (Saddle Horizontal) - 1,600 mm Z-Axis Travel (Ram Vertical) - 900 mm Maximum X / Z-Axis Cutting Feedrate - 7,500 mm / Min X / Z-Axis Rapid Feedrate - 7,500 mm / Min ATC Type of Tool Holder - MAS BT 50 Tool Magazine Capacity - 24 (12T & 12M) Max. Tool Weight - 50.0 KGS MOTOR Table Motor (Cont. / 30 Min) - AC 37.0 / 45.0 kW Milling Spindle Motor Power - 15.0 / 18.5 kW X / Z-Axis Servo Motor - AC 7.0 kW C-Axis Motor - 7.0 kW POWER SOURCE Input Power Supply - 415V / 50HZ / 3PH Power Capacity - 80 KVA DIMENSIONS & WEIGHT Height - 5,535 mm External Width (With Chip Conveyor) - 6,760 mm External Depth - 4,565 mm Weight - 25,800 kg STANDARD SUPPLIED MACHINE FEATURES • Fanuc 32iA Control System • Through Tool Coolant • Table, Servo Drives & Motors • Through Spindle Coolant • 4 Jaw Independent Manual Chuck • Splash Guard & Safety Guard Rail • Automatic Tool Change System • X-Axis Slideway Protect Steel Cover • Lubrication Oil Cooler • Work Light • Hydraulic Power Unit • Levelling Blocks • Patrol Lamp (Red, Yellow & Green) • Automatic Guideway Lubrication System • NC Power Off • Coolant System & Wash Gun • Chip Pan • Electrical & Mechanical Manuals

Condition: used, Year of construction: 1970, turning length: 12,000 mm, turning diameter: 1,800 mm, spindle speed (max.): 180 rpm, spindle speed (min.): 2 rpm, workpiece weight (max.): 8,000 kg, overall weight: 38,000 kg, center width: 12,000 mm, power: 35 kW (47.59 HP), distance between centers: 12,000 mm, machining diameter: 1,800 mm, number of spindles: 1, CONTROLS .. CNC Teach In Controls BASIC FUNCTIONS .. number of spindles: 1 .. number of x/z slides: 1 WORKING RANGE TURNING .. swing diameter (max): 1800 mm .. turning diameter (max): 1400 mm .. worpiece length max.: 12000 mm .. workpiece weight max.: 8000 kg MAIN SPINDLE .. spindle revolutions (min): 1.8 /min .. spindle revolutions (max): 180 /min .. number of gears: 4 TAILSTOCK .. distance betw. centers (max): 12000 mm ELECTRICAL SPECIFICATIONS .. total power consumption: 35 kW .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 38000 kg ATTACHMENTS (TURNING) .. tailstock: yes .. steadies (number): 2 Dceb Et Efjwgkt Ionsg .. hydraulic system: yes Machine equipped with a small drilling-milling unit Equipment: - 2 bezels - 1 faceplate

Condition: used, Year of construction: 2014, turning diameter 260 mm turning length 450 mm control Heidenhain turning speed range - main spindle max. 5.000 min/-1 drive capacity - main spindle 16,5 / 11 kW tool taper VDI 30 number of tool places 12 Pos. x-axis 160 mm z-axis 450 mm total power requirement 21 kW weight of the machine ca. 3,4 t dimensions of the machine ca. 5 x 2,2 x 1,8 m In our opinion, the machine is in very good condition Used condition and can be viewed under power by appointment become. Technical features: - Operating hours: approx. 18.876 h - Spindle hours: approx. 4.501 h Dcebowgi Iwj Et Efnog Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 1999, turning diameter 400 mm turning length 600 mm control Turn Plus CNC Pilot 3190 total power requirement 44 kVA weight of the machine ca. 5 t dimensions of the machine ca. 6 * 2,5 * 2 m Dsb Et Efjwgkcponscg Machine has been in use until now ( 2-axis turning ) Known defects: - Driven tools without function - Tailstock leaking - out of service - Sporadic problems hydraulics / leaking

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm Debowgi Tmj Et Efnjcg turning length / mm

Condition: used, Year of construction: 1994, faceplate diameter 1400 mm 51228 table turning speeds 315 U/min turning height 1500 mm Dcob Eewgi N Ust Efnog swing dia. max. 1750 mm

Condition: excellent (used), Year of construction: 2006, turning diameter 270 mm turning length 600 mm swing diameter over bed slide 170 mm cross slide - travel 140 mm longitudinal slide -travel 60 mm spindle turning speed - stepless 30 - 2300 U/min voltage 230 V Deb Et Eewgi H Hefnjcg total power requirement 1,4 kW weight of the machine ca. 0,15 t dimensions of the machine ca. LTH 1,23 x 0,5 x m Includes accessories: - Multifix system with 5 cartridges - Jaw chuck including jaws - Turning tool - Change gears for thread cutting - Live center - Cabinet

Condition: used, Year of construction: 2019, number of spindles 8 bar capacity 36 mm control FANUC 30i-B Subspindle speed 7.500 U/min Deb Et Ejwgi D Esfnjcg Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 15.666h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36

Condition: ready for operation (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 158231, turning length: 300 mm, turning diameter: 400 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 420 mm, travel distance Z-axis: 180 mm, controller model: Siemens Sinumerik 808D, TECHNICAL DETAILS Max. turning diameter over bed: Ø 400 mm Max. turning diameter over support: Ø 280 mm Max. workpiece length (center distance): 300 mm Control: Siemens Sinumerik 808D Travel paths X-axis travel: 180 mm Z-axis travel: 420 mm Rapid traverse (X & Z axis): 6,000 mm/min Spindle Spindle speed range: 250 – 3,000 rpm Spindle mount: A2-5 Spindle bore: 42 mm Drive Main drive motor power: 7.5 kW Tailstock Tailstock: hydraulic Max. tailstock quill stroke: 80 mm Tailstock taper: MT4 MACHINE DETAILS Dimensions (without Chip conveyor): 2,470 x 1,370 x 1,880 mm Total weight: approx. 4,500 kg EQUIPMENT - Heavy-duty design - Inclined bed design (also suitable for crane parts) Dcjbswhqnno Et Efnsg - Chip conveyor (also suitable for stainless steel chips) - Hydraulic collets - Hydraulic jaw chuck

Year of construction: 1996, Condition: ready for operation (used), A CNC lathe from Mazak's Super Quick Turn series is available. Travel X/Y/Z: 180mm/100mm/620mm, spindle speed: 3000rpm, tool holder: VDI40, tool positions: 12, axes: 5, machine dimensions X/Y: approx. 3200mm/1800mm, weight: approx. 6000kg, control: Mazatrol T Plus. Documentation available. On-site inspection is possible. Presumably there is a card error, as the machine runs irregularly. Dsb Et Efowhp Iyonscg

Condition: used, turning speeds 800-1500 U/min Dob Et Eswgi Rrjfnjcg turning diameter over bed / mm turning diameter over slide rest / mm

Condition: used, Year of construction: 1992, serial number 31302 control Fanuc with double spindles x turning diameter max. 600 mm x-travel 1000 mm with magazine x extensive accessories ca. 100 Aufnahmen, auch angetrieben weight of the machine ca. 13 t +++++ Dcsb Eohn T D Ijt Efnog Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 2018, swing dia. 600 mm turning diameter 310 mm turning diameter over slide 355 mm spindle bore 53 mm bar capacity 45 mm turning speed range 6000 U/min turning length 388 mm travel -z axis 400 mm travel -x axis 220 mm turret (x-stations) 12 control SIEMENS 828D (Touch) c-axis 0,001° 0 total power requirement 20 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. LTH 3,7 x 2,0 x 2,0 m Includes preparation for automation (loading robot) Year of manufacture: 11/2017, delivery: 2018 - Automatic door - 12-station tool turret, driven at 5,000 rpm - Workpiece catcher Dcob Et Efowgi Hysnjg - RENISHAW touch probe, automatically retractable - Tailstock - Chip conveyor - Coolant pump Accessories: Including collet chuck Including 2 x driven tool holders (radial + axial) Including 9 x fixed tool holders Including USB & LAN interface Including manuals

Condition: excellent (used), Year of construction: 2018, operating hours: 50,382 h, Functionality: fully functional, machine/vehicle number: L220EA/1413, spindle speed (max.): 10,000 rpm, overall weight: 2,400 kg, bar diameter: 25 mm, power: 3.7 kW (5.03 HP), All technical data can be found on Citizen's website for L20E-2M10 - Purchased new in 2018 and installed by Citizen. - Regular maintenance carried out in house. - Auto feeder Boss 338-HD Superfast for 3m bar length feed up to Ø25mm - Cool Blaster Mist Control to recycle coolant mist. Recently had filters replaced. - CM10-1000-4B High Pressure Coolant Unit Dcsb Et Ejwhpzgefnjg For any more information please do not hesitate to contact.

Condition: used, Star SR-20 Type 530G Sliding Head CNC Lathe with Fanuc 16T Control, 5 Axis, Twin Spindle, 6 Turning Tool Bays, 3 End Collet Bays, 3 Side Collet Bays, 3 End Boring Bays, Serial No. 010804, FMB Turbo 3 - 26 Bar Feed, Max Bar Length 3800mm Country of Origin: Japan Dob Et Ejwhpaiefnecg Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Year of construction: 2012, Condition: ready for operation (used), General Data Measurements width 1000 mm Measurements depth 1700 mm Measurements height 870 mm Machine weight 11974 kg Control Unit Brand MAZATROL Main Drive Number of spindles 2 Spindle speed range 4000 RPM Spindle motor power 30 HP Spindle bore 87,884 mm Number of axis 3 Movement X-Axis Movement 309.88 X-Axis Rapid Traverse 945 IPM Y-Axis Movement 76.2 mm Z-Axis Movement 605.028 mm Z-Axis Rapid Traverse 945 IPM Turret Number of turrets 2 Rotating tools Yes Tools Number of station 12 Additional Equipment Max Cutting Length (Chucker): 225 mm Max Distance Between Spindle Faces: 1450 mm Min Distance Between Spindle Faces: 249.42mm General Data Measurements width 1000 mm Measurements depth 1700 mm Measurements height 870 mm Machine weight 11974 kg Control Unit Brand MAZATROL Main Drive Number of spindles 2 Spindle speed range 4000 RPM Spindle motor power 30 HP Spindle bore 87,884 mm Number of axis 3 Movement X-Axis Movement 309.88 X-Axis Rapid Traverse 945 IPM Y-Axis Movement 76.2 mm Z-Axis Movement 605.028 mm Z-Axis Rapid Traverse 945 IPM Dsb Et Eswfurlefnecg Turret Number of turrets 2 Rotating tools Yes Tools Number of station 12 Additional Equipment Max Cutting Length (Chucker): 225 mm Max Distance Between Spindle Faces: 1450 mm Min Distance Between Spindle Faces: 249.42mm This 3-axis Mazak Multiplex 6300-II Y was manufactured in 2012, offering robust capabilities for horizontal turning. Ideal for precision machining, this used machine maintains a solid performance record. Consider the opportunity to buy this Mazak Multiplex 6300-II Y horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: new, Traub Rollers for Stamag Bar Loaders DN60, DN61, DNH61, 707451, 10561157 Dsbewhn I Ss Et Efnocg (1) Item No.: 707451 (2) Item No.: 10561157 Condition: New Rollers for Stamag DN60, DN61, DNH61, 707451, 10561157 Price per piece. Inner diameter: 17mm Outer diameter: 120mm Thickness: 35mm Traub rollers for Stamag bar loaders DN42, DNH42, 715078, 10828092 VST (1) Item no.: 715078 (2) Item no.: 10828092 Condition: New Rollers for Stamag DN42, DNH42, 715078, 10828092 Price per piece. Inner diameter: 15mm Outer diameter: 85mm Thickness: 23mm Traub rollers for Stamag bar loader DN26 DN30 DNH32 606990 687385 (1) Item no.: 606990 (2) Item no.: 10837472 Condition: New Rollers for Stamag DN26, DN32, DNH30, 606990, 10837472, 687385 Price per piece. Inner diameter: 10mm Outer diameter: 60mm Thickness: 15mm

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, turning diameter: 410 mm, spindle bore: 91 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 255 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 670 mm, bar diameter: 80 mm, CNC Fanuc 18i - T WORKING RANGE Max. workable bar diameter: mm 80 Max. diam. workable from recovery: mm 410 Max. workable length: mm 670 Max. rotating diameter: mm 600 MAIN SPINDLE Max. rotation speed: rpm 3,500 Spindle nose: ASA 8 “ Spindle hole: mm 91 Internal diameter of bearings: mm 140 Motor power: kW 22 Motor torque: Nm 539 TAILSTOCK Tailstock cone: CM 5 with CM4 reduction Automatic positioning of B-axis: mm 660 B-axis rapid: m/min 15 TURRET Number of positions: N° 12 Tool stem for external/internal: mm 20 x 20 – 25 x 25 – Ø32-40-50 Rotation time (1 pos): sec 0.15 DRIVE TOOLS Number of positions: N° 12 Max rotation speed: 4,000 rpm Motor power: 3.7 kW Motor torque: 70 Nm C AXIS Minimum programmable value: ° 0.001 Max. rapid speed: 100 rpm AXES X-axis stroke: 255 mm Z-axis stroke: 670 mm Y-axis stroke: 110 mm (+ 60 / – 50) X-axis rapid: 20 m/min Z-axis rapid: 24 m/min Y-axis rapid: 7.5 m/min COOLANT Tank capacity: 250 l Pump flow rate: 120 l/min Pump motor power: 0.75 Kw Dceb Etowhm Rro Efnjg DIMENSIONS – WEIGHT Overall dimensions with chip conveyor: 4.450 x 1.900 x 2.100 mm h Height of spindle center: mm 1.600 Weight with chip conveyor: Kg 6.300 Machine equipment: • Self-centering hydro-divider Autoblock type AXN 315 mm • Various motorized tool holders (radial and axial) • Use and maintenance manuals and CE declaration of conformity Year of construction: 2013

Condition: used, _____ Description: Year of manuf. : 2023 Control : Siemens SINUMERIK 828D Turning diam. : 560 mm Turning length : 1000 mm Mainspindle: Technology:belt-driven spindle Speed (max.):4500 rpm Power (max.):15 kW Bar capacity:65 mm Workpiece clamping:3-jaw chuck; Autogrip 3H-210 Tool carrier (X/Z): Technology:Turret with 12 stations (BMT-interface) Tool holder:BMT-interface Traverse path X / Z:200 / 1050 mm Rapid traverse X / Z:30 / 30 m/min Tailstock: Technology:programmable Travel:900mm Dob Etswgg T Rs Efnecg Cone:MK5 Equipment/Accessory: Chip management:chip conveyor with chip bucket Coolant management:high-performance coolant system with coolant pump Raw material feed:bar feeder interface Set-up mode:electronic handwheel Lubrication management:automatic central lubrication Other equipment:work light; flushing gun

Condition: good (used), Year of construction: 2014, operating hours: 17,300 h, Functionality: fully functional, turning length: 200 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, spindle bore: 26 mm, TECHNICAL DETAILS Control: Mitsubishi Main and counter spindle diameter: 20 mm Spindle bore: 26 mm Djb Et Efewhmrcsnocg Maximum machining length for long turning: 200 mm Maximum machining length for short turning: 50 mm Main spindle speed: 10,000 rpm Counter spindle speed: 8,000 rpm Rear side machining Rear block: with Y-axis Stations for rear side machining: 8 units Deep hole drilling stations on counter spindle: 6 units MACHINE DETAILS Operating hours: approx. 17,300 h Bar loading magazine: FMB Turbo 2-20 EQUIPMENT - Conversion kit D20 - Müller CL3 high pressure system with 8-way switchable valves, 130 bar, and automatic backwash filter - Automatic fire extinguishing system Kraft + Bauer included Fire damper - Angle-adjustable driven holder 3-way

Condition: used, Year of construction: 2007, Star SR-20RIII Type 680 Sliding Head CNC Lathe with Fanuc 300iS Control, 5 Axis, Twin Spindle, 14 Turning Tool Bays, 4 End Collet Bays, 4 End Collet Bays, 5 Side Collet Bays, Nobec Fire Suppression System. S/No. 0119 (008) (2007) Run Time - 14998H42M95, FMB Turbo 3 - 36 Barfeed, 3200mm Max Work Piece Length. S/No. 41-260-479/R 565589. Star G42000 High Pressure Coolant System. S/No. 222 (2007) Country of Origin: Japan Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Dcob Et Efewhn Uxjneg

Year of construction: 2009, Condition: ready for operation (used), General Data Measurements width 1879,6 mm Measurements depth 2743.2 mm Measurements height 1905 mm Machine weight 11000 kg Control Unit Brand MAZATROL Main Drive Spindle speed range 4000 RPM Spindle motor power 35 HP Spindle bore 76.2 mm Number of axis 2 Movement X-Axis Movement 177,8 mm Z-Axis Movement 558,8 mm Workpiece Workpiece drm over bed 6731 mm Dcjb Eswfuqzet Efnjg Turret Number of turrets 1 Tools Number of station 12 This Mazak QTN 250-II was manufactured in 2009. A robust horizontal turning machine, it offers reliable performance for precision machining. Ideal for those looking to enhance their machining capabilities with a proven model. Contact us for more information. Application Types Turning

Condition: new, Traub Telescopic Cover, Telescopic Sheet, 945334 TNC42 TNC65 (1) Item No.: 945334 (2) Item No.: 10732161 Condition: New Dcjb Etjwhn H Uj Efneg Traub Telescopic Cover, Telescopic Sheet, 945334 TNC42 TNC65

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, turning length: 560 mm, turning diameter: 220 mm, spindle bore: 52 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 170 mm, travel distance Y-axis: 55 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (max.): 5,000 rpm, bar passage: 45 mm, CNC Fanuc 32i – model B WORKING RANGE Max. workable bar diameter: mm 45 Max. diam. workable from recovery: mm 220 Max. workable length: mm 560 Max. rotating diameter: mm 580 MAIN SPINDLE Max. rotation speed: rpm 5,000 Spindle nose: ASA 5 “ Spindle hole: mm 52 Internal diameter of bearings: mm 90 TAILSTOCK Tailstock cone: CM 5 with CM4 reduction B-axis rapid: m/min 15 TURRET Number of positions: No. 12 Tool stem for external/internal: mm 20 x 20 – 25 x 25 – Ø32 Rotation time (1 pos): sec 0.15 Dcsb Et Efjwhlf Ujnog DRIVE TOOLS Number of positions: No. 12 Max. rotation speed: rpm 4,000 Motor power: kW 3.7 Motor torque: Nm 47 C AXIS Minimum programmable value: ° 0.001 Max. rapid speed: rpm 100 AXES X-axis travel: mm 170 Z-axis travel: mm 560 Y-axis travel: mm + 55 / – 50 B-axis travel: mm 490 X-axis rapid: m/min 20 Z-axis rapid: m/min 24 Y-axis rapid: m/min 6 COOLANT Tank capacity: l 250 Pump flow rate: l/min 230 Pump motor power: Kw 1.5 DIMENSIONS – WEIGHT Overall dimensions with chip conveyor: mm 4.240 x 2.000 x 2.020 h Height of spindle center: mm 1.000 Weight with chip conveyor: Kg 4.900 Equipment machine: • 3-jaw Autoblock self-centering chuck diam. 210 mm • Various motorized modules (axial + radial) • Use and maintenance manuals and CE declaration of conformity Year of construction: 2012

Condition: used, Year of construction: 2007, Haas TL-2CE CNC Lathe. S/No. 3080208 (2007) with Haas CNC Control, 300mm 3 Jaw Chuck, Tailstock. Country of Origin: U.S.A Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Dcsb Et Ejwhn Rysfnsg