Condition: good (used), Manufacturer TACCHELA Model ELEKTRA 1018 CNC Condition Used Stock Number 4591 Dolq Eaetu Ui Dorgsut Distance between points 1000 mm Ø max to grind 350 mm Make cnc FANUC Working wheel dimensions (h x id x w) 508x203.2x80 mm Main motor power 7.5 Kw Dimensions (length x width x height) 3800 × 2250 × 1800 mm Weight approx. 6,500 Kg Max. Z-axis travel 1.180 mm Max. X-axis travel 350 mm Accessories Mist extractor, grinding wheel balancer BALANCE SYSTEM, cooling unit with paper and magnetic filter

Condition: as good as new (ex-display), Year of construction: 2017, Functionality: fully functional, MILLING MACHINE CHETO ix 2000 year 2017 CNC FAGOR X 2000 Y vertical 1200 Z transverse 700 W drilling stroke 1620mm B table rotation 360.000 pos. A inclination +25°/ - 15° drilling cycle stroke 1630 + 700 drilling capacity 40mm tapping M32 . milling 500 cm3 /min spindle ISO 50 - Speed 4500rpm - 15/22KW Torque 191/287 Nm table 1600 x 1300 - admissible weight 20t - 360.000 pos. ATC 20 pos. chip conveyor high-pressure coolant paper filtration machine weight 28t overall dimensions 5970 x 6010 Duolqsutgzlj Earget

Condition: good (used), Year of construction: 2010, AMC Schou Model K-2000-U Crankshaft Grinding Machine (2010) Serial No. 24035-2010 Year 2010 Swing Over Bed 690mm Distance Between Centres 2190mm Max Distance Between Chucks 2250mm Max Length of stroke 280mm Grinding Wheel Speed 760rpm Grinding Wheel Diameter 813mm Max Workpiece diameter 200mm Coolant Tank Coolant Pump Machine Manual Djlq Eouruhkeargout

Condition: good (used), Year of construction: 1963, machine/vehicle number: 30769, saw blade diameter: 300 mm, input frequency: 50 Hz, input voltage: 380 V, Heller Brothers SA 315 -WKG 972 Duolq Earourkypogjt On offer here is an automatic saw blade grinding machine from Gebrüder Heller. Technical data: Saw blade diameter: 300 mm Clamping angle: 20 ° Lateral displacement: 73 mm Power supply / connected load: 380 Volt 50 HZ Factory No.: 30769 Rated current: 2 A

Condition: refurbished (used), Details see PDF Options: -Internal grinding device Duslq Earod H Nrqjgjt -grinding up to 3 diameters in 1 working cycle - other options according to customer requirements accessories: on request

Condition: excellent (used), Year of construction: 2000, operating hours: 27,383 h, Functionality: fully functional, grinding length: 1,000 mm, grinding diameter: 350 mm, rotational speed (max.): 3,000 rpm, The machine was thoroughly checked by STUDER. No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: GE Fanuc Series 16-T X-axis: 275 mm Z-axis: 1,050 mm Grinding head Rotatable universal sanding head: For external, surface and internal sanding Sanding diameter: 350 mm Table Table load: 130 kg Capacity Max. Revolutions per minute: 3,000 rpm Precision: in the 1 μm range (single part and automatic series production) Delqouqbhno Eargsut Machine running time Operating hours: 27,383 h EQUIPMENT - Tailstock - Belt filter system

Condition: good (used), Distance between points 1000 mm Height of points 175 mm Grinding length 500 mm Max. grinding Ø 300 mm Inner cone Morse 5 Working wheel motor power 7.5 Kw Slide longitudinal travel (X-axis) 267 mm Dujlq Ejtt Rawsarget Slide traverse travel (Z axis) 650 mm FANUC cnc brand Model cnc 16-T

Condition: new, width of the strips 100 mm band length 915 mm dimensions of grinding wheel 200 mm work table: 170x125 / 265x150 mm total power requirement 0,5 kW weight of the machine ca. 26 Kg dimensions of the machine ca. 0,6 x 0,5 x 0,3 m Dslqsupxqwe Eargeut

Condition: reconditioned (used), Year of construction: 2007, Functionality: fully functional, grinding depth: 250 mm, grinding length: 200 mm, overall weight: 5,000 kg, warranty duration: 12 months, grinding spindle motor power: 8,400 W, input voltage: 400 V, RECTIFICATION for holes VOUMARD 150 CNC L7 Djlqjun Nz Re Eargout CONTROL: GE FANUC Series 18i-T CNC Type

Condition: refurbished (used), Year of construction: 2024, A reconditioned cylindrical grinding machine from GP - your specialist in cylindrical grinding technology. We at GP-Rundschleiftechnik GmbH have been overhauling conventional and CNC cylindrical grinding machines from Karstens for many years. This means that you have a reliable contact partner with us even after the purchase. Overhauled Karstens K11-650 (delivery time: immediately in stock) Technical data / equipment: External grinding, internal grinding, surface grinding Center width: 650 mm Center height: 180 mm Workpiece weight: 70 kg flying, 250 kg between centers Grinding wheel diameter: 400 mm Workpiece spindle: MK 4, infinitely variable speed 30-450 rpm, swivel range 0 - 90 ° Tailstock: MK4, quill stroke 45 mm Quill force: 200-600 N Table inclination: 10 degrees Feed spindle travel: 80 mm Rapid traverse: 50 mm Coarse adjustment air cushion: 280 mm External grinding spindle motor: 4 KW Internal grinding spindle motor: 2.2 KW Workpiece spindle motor: 0.55 KW Machine weight: Net 3600 kg Dujlq Earjiqyngjgot Infeed drive via DC motor Air cushion-supported quick adjustment of the sanding headstock for quick and safe approach to the sanding position. Separate drive for the spindles for external and internal sanding. Fully automatic work sequence, infeed movement via wind rose switch: Rapid feed, rapid return, sanding mode, infeed stop, mym infeed. Automatic longitudinal sanding cycle Central coolant supply for all grinding points Workhead with infinitely variable drive with traveling and lockable spindle. Infeed control for longitudinal grinding and plunge-cut grinding, input for retraction, infeed amounts, feeds, burnout times, idle strokes New digital display for axes can be retrofitted (option) comparable to Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat

Condition: good (used), Surface grinding machine GEIBEL & HOTZ FS 40 Primus SA, No. 920287, clamping surface 400 x 200 mm Duslqeunw Ile Eargjt

Condition: ready for operation (used), Year of construction: 2016, operating hours: 10,035 h, Functionality: fully functional, machine/vehicle number: 63-N-2016-0003, working width: 1,500 mm, grinding height: 100 mm, grinding belt length: 1,540 mm, grinding belt width: 1,540 mm, No minimum price - guaranteed sale at the highest bid! Deburring module, spin module and contact module TECHNICAL DETAILS Working width: 1,500 mm Material thickness: 0.8 - 100 mm adjustable Sanding belt dimensions: 1,540 x 1,540 mm Power: 20 kW Feed rate: 500 - 4,000 mm/min Workpiece weight: max. 300 kg Dsleum Sp Ijq Eargjut MACHINE DETAILS Weight: 5,600 kg Dimensions: 3,500 x 3,000 x 2,250 mm Power: 54 kW

Condition: good (used), cylindrical grinding machine Duelqotrlqqs Eargot

Condition: new, width of the strips 100 mm band length 1220 mm band speed 1140 m/min. 0,62 x 0,4 x 0,35 cm total power requirement 1,5 kW weight of the machine ca. 0,04 t Duslq Eeupxm Esarget dimensions 0,97 x 0,67 x 0,37 m This machine can also be mounted without a base. Therefore it is suitable as a table belt sander. Base is included. Connection voltage 230 volts.

Condition: good (used), Year of construction: 1994, Functionality: fully functional, machine/vehicle number: 120 572, center height: 125 mm, grinding length: 650 mm, grinding wheel diameter: 400 mm, The machine is in good condition for its age and is ready for immediate use. Djlq Eoq Stpkjargout The X-axis spindle and the scale have been replaced in the last two years. The machine has hardly been used in the last two years and is therefore being sold. A Movomatic diameter measuring control and longitudinal positioning is included. Accessories for collet chuck and between centers are available. The machine can be inspected under power by prior arrangement.

Condition: ready for operation (used), Max./min. Diameter of workpiece: 350/10 mm Hole clampling head diameter:130 mm Maximum distance between points, placed the front centering tip in the clamping head:750 mm Maximum distance between points, placed the rear centering tip in the clamping head:1200 mm Max. Length of workpiece: ilimited Max. Diameter of right/left axes: 130/150 mm Max. Length of grinding: 500 mm Max. Number of teeth of workpiece:30 Max./min. module: 25/0.5 Max./min. weight: 500/1 Max./min. attack angle:30º/0º Max.. inclination angle: 45º Max./min. diameter grinding Wheel: 500/300 mm Grinding wheel revolution, adjustable without steps:3000-75 rpm Driving motor: N=12 Kw Cutting speed: max. 45 m/s Revolutions of workpiece, adjustable without steps: 26-1 rpm Width of grinding Wheel: - Grinding threads:15 Duslq Eehq Uh Hoargst - Endless screw until module 12: 25 - Endless screw from 12 to 20: 40 - Endless screw from 20 to 25: 60 Control CNC:FANUC serie 21-iT

Condition: good (used), Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 1682, Sanding belt dimensions approx. 4000 x 75 / 100 mm - possible contact wheel diameters up to approx. 400 mm - Drive wheels 100 - 280 mm - Height + depth-adjustable contact wheel / sanding roller - Suction pipe for connection to central suction system - 2 sanding belt speeds Cmk9Zkmiho - Right + left rotation - Motorized grinding attachment for external pipe grinding - Speed 1400 / 2800 rpm - Drive 400 V / 3.2 / 4.0 kW - Space requirement approx. W 6000 x H 2050 x D 6000 mm - Weight approx. 250 kg - Left + right support with rollers Dujlq Eoukhznjargot

Condition: good (used), Distance between points 1100 mm Center height 175 mm Maximum workpiece weight 135 Kg Dujlqouui Abj Eargjt Working wheel dimensions (h x w x d x w) Ø508xØ304.8x80 mm Main motor power 7.5 Kw Fanuc 21 Oi-T numerical control

Condition: new, width of the strips 150 mm band length 2000 mm band speed 33 m/sec total power requirement 4 kW weight of the machine ca. 100 t dimensions of the machine ca. 1,2 x 0,5 x 0,85 m Djloupxl Isq Eargeut Belt sander with - Contact disc: 600 x 150 mm

Condition: new, grinding range 2 - 20 mm sharp cornered angle min./max. 90 - 135 Grad connected load 230 V weight of the machine ca. 8,6 Kg Djlqjupxkwo Eargeut dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: new, grinding range 8 - 32 mm sharp cornered angle min./max. 90 - 140 Grad connected load 230 V weight of the machine ca. 16 Kg dimensions of the machine ca. 0,43 x 0,24 x 0,24 m Drill grinding machine: Additional station for grinding back the drilling cutting surface (clearance Dolq Eajupxh Nsrgout angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Hard metals with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Vibration-free running thanks to its heavy weight and rubber feet. Sharpening angle adjustable for all common twist drills. Package dimensions: 430 x 240 x 240mm. Weight 16kg.

Condition: new, grinding wheel diameter 250 mm connected load frequency 230 V Duslq Esupxhcjarget 90 - 180 U/min weight of the machine ca. 18 Kg dimensions 470 x 300 x 440 m Knife sharpening device with variable speed Grinding wheel 250 x 50 x 12mm, grit 220 Leather disc 200 x 30 x 12mm

Condition: new, width of the strips 75 mm band length 2000 mm band speed 30 m/sec total power requirement 3 kW weight of the machine ca. 70 t dimensions of the machine ca. 1,2 x 0,5 x 0,75 m Dolq Eaeupxg Eorgeut Belt sander with - Contact disc: 600 x 75 mm

Condition: new, grinding range 2 - 13 mm sharp cornered angle min./max. 90 - 140 Grad Duslq Eaeupxdqjrgot connected load 230 V weight of the machine ca. 10 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: new, width of the strips 100 mm band length 2000 mm band speed 15/30 m/sec tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad connected load frequency 400 V Delqeupw Rie Eargsut total power requirement 2,5 /3,3 kW weight of the machine ca. 0,19 t dimensions of the machine ca. 1,2 x 0,75 x 0,7 m