Used Grinding Surface for sale (9,981)

Year of construction: 1964, condition: good (used), Diskus Werke DSH 600/1000 Surface Grinding Machine Dsdpfxshtyuds Al Ajwc This machine type is a machine with a motor-driven grinding spindle. The workpieces are clamped and ground using clamping devices that are adapted to the specific task. The devices are attached to the machine bed. The column carriage, on which the motor spindle is mounted, serves as a feed, dressing, and oscillating slide. Manufacturer: Diskus Type: DSH 600/1000 Operating voltage: 380 V DC voltage: 24 V Control voltage: 220 V Rated power: 27 kW Rated current: 56 A Year of manufacture: 1964 Condition: used You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 1988, machine/vehicle number: 19981, grinding length:600 mm grinding width:550 mm workpiece height:320 mm Dsdpfxoi E T Idj Al Ajwc weight of the machine ca.:4,3 t

Condition: used, Year of construction: 2006, machine/vehicle number: 65126, Grinding area: 630x350 mm, grinding wheel diameter: 350 mm, magnetic clamping plate, size: 600x300 mm, with coolant system, fleece filter system and automatic depth feed. Djdpfx Aloz Nhqxs Aowc

Condition: used, grinding length:650 mm grinding width:450 mm workpiece height:425 (ohne Magnetplatte) mm max. workpiece weight:600 kg weight of the machine ca.:3,8 t total power requirement:15 kW machine dimensions approx. WxHxD:3,0 x 2,4 x 2,3 m Used/reconditioned surface grinding machine, make GER, type RSA-650. Automatic infeed in all 3 axes. Machine geometrically overhauled, repainted (RAL6011, green), all functions tested, accuracy checked. OVERHAUL SCOPE: Machine completely disassembled, all components thoroughly cleaned and tested for complete functionality. Main spindle newly mounted, concentricity 3 µ. All guideways newly scraped in new machine geometry. Wear parts replaced, defective components repaired or replaced. Reassembly, complete functional test and internal acceptance. Machine repainted. Machine in perfect condition, ready for production. MEASURED GEOMETRIC ACCURACIES: Actual geometric accuracy after overhaul, measurement with dial gauge. Geometry of machine axes X and Z X = longitudinal axis 650 mm Z = transverse axis 450 mm Dedofkg H Tspfx Al Ajwc Measurement magnet traversed with dial gauge. X axis = Max. Deviation 0,008 mm Z axis = Max. Deviation 0,005 mm INCL. THE FOLLOWING ACCESSORIES: -Electro-magnetic clamping plate, with fine longitudinal pole pitch. dimensions 600 x 400mm -demagnetizing device -Complete coolant device with paper band filter - Digital display of the vertical axis (Y-axis), make Sony -Technical documentation in English language -1 pieces grinding wheel holders -1 piece grinding wheel dresser, mounted above the grinding wheel with manual infeed and automatic (hydraulically operated) transverse movement - 1 set of setting elements You can find more information in the attachment. Payment: 100% before loading the machine Warranty: 6 months on the geometry and the new parts demonstrably installed. No general legal warranty.

Condition: used, machine/vehicle number: 62220966, Max. grinding wheel diameter: approx. 250 mm, grinding area: 350x150 mm, with magnetic clamping plate, machine light, and coolant system. Dodpfez Nhr Nex Al Aswc

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, spindle speed (min.): 10,000 rpm, spindle speed (max.): 60,000 rpm, Equipment: rotational speed infinitely variable, Overbeck overhauled in 2015 and equipped with fast frequency spindle SC3060-V1000, frequency converter SD2T 3.8kVA and cooling unit PHK525 HZ, cooling capacity 550W Dodou Aqt Ejpfx Al Ajwc

Condition: good (used), Year of construction: 1994, Grinding length max. 650 mm Grinding width 390 (max. 450) mm Distance from spindle center to table 600 mm max. Workpiece weight 350 kg Grinding area 650 x 390 mm Dwjdpfxjvz A Ste Al Aoc Travel paths: X-axis 840 mm Y-axis 500 mm Z-axis 410 mm Total power requirement 15 kVA Machine weight approx. 3.0 t Space requirement approx. 4.0 x 3.0 x 2.5 m

Condition: good (used), Year of construction: 2000, Degen FSM 300 Surface Grinder High-quality precision surface grinder from the German manufacturer Willy Degen, model FSM 300. This machine is characterized by its compact design and extreme precision, making it ideal for tool and mold making. It is perfect for workshops with limited space, where accuracy must not be compromised. Extensive accessories and highlights included: Digital Readout (DRO): For precise work and error-free positioning. Original dust extraction and wet grinding unit: Ready for immediate connection for clean working and optimal workpiece cooling. Magnetic chuck: Already mounted for immediate use. Technical data (according to the nameplate): Manufacturer: Willy Degen (Schömberg) Type: FSM 300 Machine No.: 1309 Dsdpfxjznirij Al Aowc Year of manufacture: 2000 Connection: 400 V / 50 Hz (high voltage) Power: 2.7 kVA / 5.6 A Control voltage: 24 V AC "Everything from one source: We would be happy to offer you suitable financing for your project." More new and used items can be found in our shop! International shipping costs upon request!

Condition: used, Year of construction: 1997, grinding length 880 mm grinding width 510 mm Control Siemens max. turning speeds 4.300 min/-1 grinding wheel diameter 210 - 400 mm grinding wheel width 100 mm total power requirement 26 kW weight of the machine ca. 7,5 t The machine is untested and is offered as a source of spare parts! Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale! Dsdpewwl N Sefx Al Aswc

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, OKAMOTO ACC-16*24SA1 Precision Surface Grinding Machine Okamoto Precision Surface Grinding Machine ----- Model ACC-16•24SA1 Automatic Wheelhead Approach, Retraction to Start Position, Automatic Dress Cycle with Wheel Wear Compensation, Shift Plunge Cycle--- ----- Grinding Capacity 16”x 24” Standard Accessories • Automatic Overhead Wheel Dresser • Touch Screen Controller with 10” Display With Compensation, including Diamond Tool • Vertical & Crossfeed Pulse Generator Dodpozmhknefx Al Aewc • Rapid Wheel head Retraction • Teach-Input Positioning • Load Meter for Grinding Wheel Motor • 5 HP Wheel Spindle Motor • Shift-Plunge Rough Grinding Cycle • Stainless Steel Wheel Guard • Selectable Rough/Fine Infeed Grinding Method • Leveling Bolts with Plates • Table Park for Safety • Necessary Tools & Tool Box • Stainless Steel Splash Guard • Installation and Training • Instruction Manual

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2145027, grinding length: 800 mm, grinding width: 400 mm, workpiece weight (max.): 400 kg, grinding wheel diameter: 405 mm, distance table to spindle center: 550 mm, table length: 800 mm, table load: 400 kg, type of input current: AC, table width: 400 mm, overall weight: 3,250 kg, grinding spindle motor power: 6,800 W, input voltage: 380 V, space requirement height: 1,900 mm, space requirement length: 3,450 mm, space requirement width: 2,050 mm, NC Auto down feed system and Parallel dresser Handwheel Dimension of table (magnetic plate): 800 x 400 mm Distance: table - spindle head: 550 mm Table speed: 5-25 m/min Dsdozxdh Tjpfx Al Aewc Dimension of grinding wheel: fi 405 x 50 x 127 mm Motor power: 5HP Hydraulic pump motor: 2 HP Equipped with Easson SC-402 2-axis digital readout (DRO) for precise positioning Paper filter and magnetic separator Condition: Overall in very good condition

Condition: excellent (used), PERFECT PFG-70150AHRD Surface Grinding Machine Year 2014 Table size 700 x 1500 mm Maximum longitudinal travel 1650 mm Maximum cross travel 760 mm Maximum distance table surface to spindle centre 600 mm Table speed 5 – 25 m/min Magnetic chuck size 700 x 1500 mm Spindle speed 1450 rpm Spindle motor 7.5 kW (10 HP) Grinding wheel size 355 x 40 x 127 mm Floor space required 4810 x 2550 mm Weight 7800 kg Supplied with: Automatic Downfeed System, 1500 x 700 mm Electromagnetic Chuck, Demagnetising Unit, 2 Axis Digital Readout, Remote Handwheel, Spindle Motor Speed Inverter Control, Automatic Paper Strip Filter & Magnetic Separator, Machine Pads & Levelling Bolts, Low Voltage Work Light. For sale with Jet Machinery Ltd Jet Machinery Stock No: #27039 Machine Serial Number: 1485022 Djdpfjzuxt Aex Al Aswc Cost: £49,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2008, grinding length: 1,600 mm, grinding width: 630 mm, Surface grinder 1600 x 630 M7163x16100, magnetic table size 1600 x 630, machine length 5400mm, depth 2500mm, height 2600mm. Automatic feeds in the X and Y axes. We are the first owners; the machine is used on average for a few hours a month for service-related grinding. Year of manufacture: 2008. Power: 22KW, 60A. Shipping costs are borne by the buyer. We can arrange complete container shipping, including packing and loading. Here are two packing options: Dwsdpsy Shzajfx Al Ajc Option 1 Packing on a pallet + aluminum foil and moisture absorbers Requires a 40' HC container. This is the recommended option, as the vacuum foil and absorbers create a protective barrier against moisture and salt. Cost, including loading and securing the machine in the container: 1800 EUR (net). Option 2 Packing without a pallet, aluminum foil, or absorbers. Loading only into a 40' OT container. Cost: 850 EUR (net). Note: In this case, the machine will be more exposed to moisture and salt. Example cost of TRANSPORT ORGANIZATION SERVICE – freight forwarding (all-in), loading Częstochowa, PL, unloading 121001 India, IN, 40 HC, port-to-port, approximately 40 days: 5,050.00 USD.

Condition: ready for operation (used), ABA-WERK Aschaffenburg - Hand lever - FFK surface grinding machine -Magnetic clamping plate: approx. 300 × 150 mm -Working area: approx. 350 × 150 × 150 mm -Grinding length: approx. 350 mm -Grinding width: approx. 150 mm -Max. workpiece height: approx. 150 mm -Grinding wheel dimensions: approx. Ø 200 × 20 × 76 mm -Grinding spindle speed: approx. 2,800 rpm -Longitudinal table adjustment: manual -Transverse table adjustment: manual -Height adjustment: manual -Magnetic clamping plate: permanent magnet -Machine feet -Grinding wheel guard -Extraction system -Work light -Documentation Dimensions: L x W x H 1.1 x 1.1 x 1.7 meters / Weight 800 kg Errors and omissions excepted. Djdpfx Ajzr U Svsl Aewc

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, grinding length: 1,800 mm, grinding width: 850 mm, total height: 2,955 mm, total length: 6,650 mm, total width: 3,645 mm, grinding height: 750 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 5 m/min, grinding wheel diameter: 457 mm, table load: 2,160 kg, grinding wheel width: 203 mm, spindle speed (max.): 1,400 rpm, overall weight: 13,000 kg, grinding spindle motor power: 30 W, travel distance X-axis: 1,820 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 820 mm, rotational speed (max.): 1,400 rpm, WORKING CAPACITY: Max. grinding length: mm 1.800 Max. grinding width: mm 850 Max. grinding height: mm 750 GRINDING WHEEL HEAD: Power: kW/HP 30/22 Grinding wheel dimensions: mm 457 x 203.2 x 100 Grinding wheel speed: rpm 1.400 LONGITUDINAL TABLE AXIS: Speed: m/min 1 ÷ 40 Maximum load (with magnetic table): kg 2.160 Grinding table dimensions: mm 1.800 x 600 Working stroke: mm 1.820 TRANSVERSE GRINDING HEAD AXIS: Rapid traverse speed: m/min 5 Adjustable incremental feed: mm 1 ÷ 50 Continuously adjustable feed rate: mm/min 0 ÷ 2.000 Minimum working increment: mm 0.001 Working stroke: mm 750 VERTICAL GRINDING HEAD AXIS: Rapid traverse speed: m/min 1.5 Minimum working increment: mm 0,001 Working stroke: mm 820 OVERALL DIMENSIONS: Length: mm 6.650 Dwjdsztzyvspfx Al Asc Width: mm 3.645 Height: mm 2.955 Total weight: kg 13.000 Machine complete with: • Instruction manuals and CE Declaration of Conformity

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, grinding length: 350 mm, grinding width: 160 mm, type of input current: three-phase, overall weight: 740 kg, rotational speed (max.): 2,900 rpm, power: 1 kW (1.36 HP), input voltage: 200 V, disc diameter: 250 mm, Equipment: documentation/manual, Manufacturer Mitsui MGG CO.LTD Type: MSG-200M Year of manufacture:1991-4 Maximum grinding width: 160 mm Maximum grinding length: 350 mm Maximum table length movement: 360 mm Maximum table length movement: 200 mm Table movement per handwheel revolution: 3 mm /revolution Grinding spindle speed: spindle: 2900 rpm 50 Hz Standard grinding wheel diameter: 200 mm Grinding wheel width: 25 mm Grinding wheel speed: 2900 rpm 50 Hz Dwjdpswvf Hbjfx Al Aec Grinding wheel bore diameter: 31.75 mm Electrical power: 2 HP 1 kW 4P 200V 3 phase Weight, approx. 740 kg

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, grinding length: 450 mm, grinding width: 200 mm, power: 1.5 kW (2.04 HP), input voltage: 200 V, Equipment: documentation/manual, Manufacturer Mitsui MGG CO.LTD Type: MSG-250M Dwedpjwvga Njfx Al Aoc Year of manufacture:1981-10 Maximum grinding width: 200 mm Maximum grinding length: 450 mm Maximum table length movement: 500 mm Maximum table length movement: 250 mm Table movement per handwheel revolution: 6 mm /revolution Grinding spindle speed: spindle: 2900 rpm 50 Hz Standard grinding wheel diameter: 200 mm Grinding wheel width: 25 mm Grinding wheel speed: 2900 rpm 50 Hz Grinding wheel bore diameter: 31.75 mm Electric power: 2 HP 1.5 kW 4P 200V 3 phase Weight, approx. 1050 kg

Condition: excellent (used), FANUC Power Mate control Grinding range 800 x 400 mm Wheel diameter / width / bore 250/ 50 / 127 mm Dodsyla Nuopfx Al Aowc Magnetic plate 800 x 350 mm Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 1993, ELB surface grinding machine Year: 1993 Magnetic table size: 1500x550 mm With automatic downfeed With wheel dresser Paper band type coolant tank Dsdpfx Asygtiwjl Ajwc Lots of grinding wheels

Condition: excellent (used), Year of construction: 2008, Table size 600 x 300 mm Max. grinding area 600 x 300 mm Dimensions of the grinding wheel 406 x 50 x 127 mm Min. / max. distance table / spindle center 500 mm Table speed, hydraulically adjustable 5 - 25 m/min. Cross feed 0.1 – 20 mm Cross travel 900 mm/min. Handwheel, cross 1 revolution 5 mm 1 division mark 0.02 mm Automatic vertical feed 0.001 - 0.999 mm/cycle Handwheel, vertical 1 revolution 2 mm 1 division mark 0.01 mm With AD 5 (automatic feed) 0.005 mm Grinding motor speeds 1450 / 2900 rpm Grinding motor 1.5 / 3.7 kW Hydraulic pump motor 0.75 kW Drive motor, cross 1.1 kW Dwjdpfx Aleizka Ie Asc Drive motor, vertical 1.1 kW Machine dimensions L x W x H approx. 2300 x 1800 x 2100 mm Weight 1700 kg Accessories / Special features: • 2-axis digital display • Automatic vertical feed with spark-out and subsequent retraction • Electro-magnetic clamping table L x W 600 x 300 mm • Manual grinding wheel dressing device • Grinding wheel speed, 2 stages • 1 grinding wheel with flange • Control panel • Lighting • Coolant system with band filter and magnetic separator • Machine feet • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 11-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Grinding range 1000x500x630mm Table size 1000x400mm Wheel diameter 400mm Djdpjfbx Dmefx Al Ajwc Magnetic plate 1000x500mm MARCELS MASCHINEN CH

Condition: good (used), Grinding range 400x250x375mm Wheel diameter 300mm Magnetic plate 400x250mm Dwjdpfefbx Dwsx Al Asc MARCELS MASCHINEN CH

Condition: used, ABA precision surface grinding machine with accessories, machine used very little. Magnet size: 400x250 mm Infinitely adjustable grinding spindle Grinding wheel dressing device (Diaform) Automatic feed Feed rate infinitely adjustable Inch mode Coolant system with belt filter system Dust extraction for wheel dressing device Dodpfx Aloz Ehmdo Ajwc Balancing device, centering arbor, Wheel removal device Tool cabinet with various new grinding wheels Operating manual.

Condition: good (used), Year of construction: 1989, grinding length: 400 mm, grinding width: 200 mm, Grinding area: 400 x 200 mm Magnetic area: 400 x 175 mm Vertical adjustment: 410 mm Grinding wheel dimensions: 225 x 25 x 50.8 mm Grinding wheel speed: 1420 / 2840 rpm Complete with: Dedpfov Tcy Ujx Al Ajwc - Coolant system - Hydraulic unit - Documentation Country of origin: Germany Motor power: 1.5 kW Machine dimensions (L x W x H): 2200 x 1500 x 2100 mm Machine weight: 1100 kg

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 1107, total height: 1,700 mm, total length: 1,000 mm, total width: 900 mm, overall weight: 350 kg, For sale is a compact surface grinding machine from the German manufacturer Degen. Model FSM300E. In very good used condition. The machine has seen little use. A very high-quality and precise machine, ideal for tool or prototype construction. Due to its small footprint, it is also suitable for small workshops. Grinding length: 300mm Cross travel: 170mm Max. distance between magnetic chuck and grinding wheel: 290mm Rapid traverse in height adjustment Magnetic chuck: 300x150mm Space requirement: length 1.0 m x width 0.9 m x height 1.7 m Djdpoz E S Hbefx Al Aswc Machine weight: approx. 350kg Includes coolant system, electromagnet, wheel dressing device, and extraction system. The machine runs perfectly and grinds with precision. Can be tested while powered on. Location: 5023 Salzburg.