Condition: new, Year of construction: 2024, rotary table diameter: 800 mm, The basic assemblies of the grinding machine include the base, sledge, column with grinding wheel headstock, rotary table and control cabinet. The table is driven by a mechanical gearbox and a reducer-wafer unit and performs rotary motion, the table speed is controlled by a potentiometer from the machine control panel. The machine in manual operation will have the possibility of impulse rotation of the table controlled from the control panel. The lateral displacement is carried out by the column together with the headstock on the rolling guides of the base. This displacement is carried out by a ball screw with a belt transmission and an asynchronous motor controlled by a frequency converter. The vertical displacement is performed by the headstock on the column sliding guides. A ball screw is used to drive the vertical displacement. The continuous displacement of the column is carried out steplessly. The values are set from the control panel. The machine will be equipped with a direct digital readout in the vertical axis with a resolution of 0.001 mm. There will be an electronic wheel on the control panel for moving the vertical axis during manual operation, and an operator panel (programmable display). The grinding machine will have infinitely adjustable rotation of the grinding wheel spindle and table rotation. The grinder will have the ability to work in an automatic cycle with the ability to program the number of squeeze passes and other parameters necessary for grinding in an automatic cycle. Safe operation of the grinding machine will be ensured by a semi-open cabin and all electrical and mechanical safety devices complying with CE standards. 1 Working surface of the table Ø800 mm 2 Largest distance between the table surface and the headstock axis when the headstock is moved manually 350 mm 3 Smallest distance between the table surface and the spindle axis 125 mm 4 Maximum mass of ground workpiece 2500 N 5 Range of infinitely adjustable table speed 2-100 m/min 6 Largest horizontal column travel 450 mm 7 Range of infinitely adjustable column travel speed 0.2 - 3 m/min 8 Wheel feed per: 1 code referencing unit 0.001 mm 9 Minimum automatic grinding wheel infeed 0.001 mm 10 Maximum automatic wheel feed 0.040 mm 11 Accelerated grinding wheel travel speed 1 m/min 12 Rotation of grinding wheel spindle 1000 - 2500 rpm 13 Diameter of new grinding wheel 400 mm 14 Diameter of used grinding wheel 250 mm 15 Grinding wheel mounting hole 127 mm 16 Nominal / maximum width of grinding wheel 50 mm Dsbu Ejvf H Hij H Apsut

Condition: excellent (used), Vertical saw for olisow automatic feeder Djbu E H Aou Hugwopout

Condition: used, Year of construction: 1989, Functionality: fully functional, workpiece weight (max.): 20 kg, grinding length: 650 mm, grinding wheel diameter: 350 mm, total width: 3,400 mm, total length: 3,450 mm, total height: 2,000 mm, grinding diameter: 80 mm, grinding spindle motor power: 12 W, overall weight: 1,900 kg, For sale Studer S 20-4 CNC slab grinder Technical data: Range of motion: X: 80 mm Z: 650 mm Table stroke length: 1-650mm Grinding disc diameter max 350mm, Disc bore 127mm Speed: 1600, 1975, 2000 /min Maximum workpiece weight: 20kg Controller: Siemens Sinumerik 3 Power: 12 kW Year of manufacture: 1989 Dimensions: Dobu E H Ajvdyg Topeut Machine weight: 1900 kg Machine dimensions (H, W, D): 3400x3450x2000

Condition: excellent (used), Year of construction: 1983, Functionality: fully functional, machine/vehicle number: 1404, total width: 1,690 mm, total length: 3,410 mm, total height: 1,915 mm, overall weight: 3,000 kg, TECHNICAL DATA Capacity - Height of centres: 125/175mm - Distance between centers: 400mm; 700mm; 1025mm - Max.travel of longitudinal slide: 400mm; 700mm; 1025mm Table - Table speed steplessly adjustable: 0.5 - 5.5 m/min. - Reversal dwell of table: 0-6 sec. - Minimum automatic stroke approx.: 1.5mm - Maximum swivel of table: 400 deg.- 12 ; 700 deg. -10; 1025 deg.- 8 - Travel per revolution of handwheel: 25mm Workhead - Swivel towards grinding wheel: 90 deg. - Spindle speed, steplessly variable: 30 - 675 RPM - Spindle nose taper: Morse 5 - Collet shank diameter: 25mm - Diameter of 3-jaw chuck: 160mm Wheelhead - Grinding wheel L.H. or R.H.: - Diameter (special exec. 6.25kW/8.4 HP): 400 (450) mm - Maximum width: 50 (80) mm - Bore: 127 (203) mm - Spindle speeds (3-step Vee-belt pulley) Dusbuoupiycj E H Apet - Grinding wheel dia 400: 1500/1625/1800/2000/2200/2400 RPM - Grinding wheel dia 450 (8.4HP): 1340/1500/1625/1800/2000/2200 RPM - Grinding wheel motor approx.: 3kW - Grinding wheel motor, special for 450 dia wheel approx.: 6.25kW - Rapid travel of wheelhead: - Hydr.approach and retraction: 40 mm - Additional adjustment with hand leveler: 210 mm - Swivel of the whole cross slide L.H. and R.H.: 45 deg. - Interminent feed, steplessly adjustable (on dia) at left or right hand table reversal, or both: 0.001 - 0.05 mm/sec. - Plunge feed, steplessly adjustable (on dia): 0.0002 - 0.1 mm/sec. - Maximum depth of plunge on dia: 1.7 mm Motor rating - Wheel spindle, standard: 3 kW - Wheel spindle special rating: 6.25 kW - Workhead: 0.55 kW - Hydraulics: 0.55 kW - Coolant pump, standard: 0.17 kW - Coolant pump, inteclon: 1.1 kW Workpiece weight - Maximum between centers: 80 kg Extras: grinding wheels, coilets, other additional equipment, user manuals

Year of construction: 1989, Condition: excellent (used), Used surface grinding machine SPG 30x80 JOTES. Grinding range: 300x800 mm. 2018 reconditioned. Excellent condition. Tested under power. Ready to delivery, installation and work. Complete offer on request. Debu E Hjd Au Ths Apeut

Condition: excellent (used), Year of construction: 1988, Magnet table 1.800 x 450mm, cross travel 580mm. New CNC Fagor 8037M 2018. Paper filter with magnet separator Duebotqt Idou E H Apjt

Condition: reconditioned (used), Year of construction: 2024, Functionality: fully functional, workpiece weight (max.): 200 kg, grinding length: 1,500 mm, SCHAUDT E450x1500 roller grinder, after a major overhaul and upgrade to a CNC grinder. The machine has geometric acceptance parameters in accordance with WOT acceptance conditions. Safe operation of the grinder is ensured by a semi-open cabin and all electrical and mechanical safety devices in force in accordance with CE standards. SCHAUDT E450 x 1500 1. nominal grinding length - 1,500 mm 2. maximum length of the workpiece clamped in the tusk - 1 623 mm 3. grinding length max. - 1 540 mm 4. elevation of the tusks - 150 mm (5) The maximum weight of workpieces clamped in claws - 200 kg 6. the maximum permissible mass of the object fastened in the chuck - 50 kg. 7. length of the grinder - 5,600 mm 8. depth of the grinder - 2 600 mm 9. height of the grinder - 2,000 mm 10. elevation of the tusk above the floor - 1 020 mm 11. total weight - 5,200 kg 12 Total power requirement - 15 kVA 13. total travel distance in the X axis - 300 mm 14. speed of accelerated grinding wheel travel (JOG) AUTO - 750 / 1000 m/min 15.Rotation of the grinding wheel spindle - unadjusted - 1 430 rpm Djbu E Hovf Hp Ro Apeut 16. value of grinding wheel travel in X axis in INC. mode: Min - 0.001 mm Max - 0.1 mm 17. value of grinding wheel travel in Z axis in INC mode Min - 0.001 mm Max - 0.1 mm 18. infeed speed range in plunge grinding mode - 0,06-20 mm/min 19.Total displacement of the headstock on the base - 300 mm 20. power of grinding wheel drive motor - 7,5 kW 21. peripheral speed of grinding wheel - 32 m/s 22. diameter of new grinding wheel - 500 mm 23. grinding wheel mounting hole - 203 mm 24.Maximum diameter of the workpiece when clamping in collets - 0.5-20 mm 25. speed range of the object spindle - 1-400 rpm 26. power (torque) of the motor for driving the headstock of the object - 1.9 (11) kW(Nm)

Condition: used, Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 731009, 5-axis saw blade sharpening machine Walter Woodtronic CNC 5 / Five axis Walter Woodtronic CNC 5 Can sharpen up to 1m diameter / Up to 1m diameter Duobouwt Egsu E H Apot For more information please call operator: Magyar / German

Year of construction: 2014, Condition: excellent (used), datas as plate Dujbsmxkzlsu E H Apjt

Condition: reconditioned (used), Functionality: fully functional, Partially overhauled conventional universal grinding machine - machine has been rebuilt, new geometry, all necessary parts have been renewed, new paintwork, with many accessories, with internal grinding spindle. With 6 months warranty. TECHNICAL DETAILS Grinding length: 1000 mm Center height: 175 mm Sanding diameter: max. 350 mm Grinding wheel diameter: 400 mm Control: conventional Djbu Eett I U No H Apeut MACHINE DETAILS Total power requirement: 8 kW Weight of the machine: approx. 4.5 t

Condition: as good as new (ex-display), Used universal tool and cutter grinding machine US 2305 JUNGNER Sweden. 2018 general overhauled. Complete rebuilded from scratch as you can see on photos. As good as new or better ;-). Lot of accessories. Tested under power. Ready to delivery, installation and work. Complete offer on request. Dobsd At Rbeu E H Apeut

Condition: like new (used), Year of construction: 2018, operating hours: 1,646 h, Functionality: fully functional, machine/vehicle number: GN4240001, Cylindrical grinding machine in special design and with automation SPECIAL VERSION - Tailstock as counter spindle with C-axis 0.001° (synchronized with workpiece spindle - optional) - Center taper MT no. 4 - Stroke 25 mm (with CNC position control) AUTOMATION - Fanuc industrial robot, model M-10iA 10M with force sensor and Schunk gripper - Rotating robot table - Robot connected to the machine (ready for work) TECHNICAL DETAILS Distance between chuck and counter spindle: 300 mm (special version) Center distance: 400 mm (without chuck) Center height: 210 mm (radius) External grinding diameter with / without tailstock: Ø 300 / 400 mm Control: Fanuc 0I-TF Grinding spindle Debu Eetr A Rhe H Apjut Grinding wheel dimensions: Ø 405 x 50 - 75 mm Motor: 5.5 kW Speed: 1783 rpm Workpiece spindle Workpiece chuck: Hainbuch Spanntop mini size 52 Motor: 2.7 kW Spindle speed: 10 - 300 rpm C-axis: 0.001° Rotation angle: -30° / +90° (manual) AUTOMATION Robot: Fanuc M-10iA 10M Number of axes: 6 Payload: 10 kg Reach: 1422 mm Mass: 130 kg Equipment: Force sensor, Schunk gripper MACHINE DETAILS Switch-on time: 3914 h Grinding time: 1646 h EQUIPMENT - Grinding sensor (Marposs) - Balancing system (Marposs) - Measuring probe for checking linear dimensions and the other for checking cylindrical dimensions - in progress (Marposs) - Steady rest for grinding (Arobotech) - Power clamping cylinder for workpiece spindle - pneumatic - Cooling unit with filter system - Grinding mist extraction

Condition: reconditioned (used), Year of construction: 1998, machine overhauled, major overhaul - year of production 1998 TECHNICAL PARAMETERS: diameter of the main saw ⌀ 350 mm max. sawing height 70 mm max. sawing width 150 mm engine power 3 kW rotational speed of the spindle 4500 rpm diameter of spindle tip ⌀ 30 mm nominal pressure of compressed air 0,6 Mpa frequency of working cycles 0 - 28 cycles/min max. stroke of saw 100 mm connection diameter of suction nozzle 1 x ⌀ 125 mm air demand (in dust extraction system) 1300 m3/h Dobu Est Dxwaj H Apout height to table surface 850 mm weight 160 kg The DMDK-35 circular saw is used for transverse sawing of wood. The maximum cutting width is 220 mm with a height of 35 mm. The saw is controlled by a foot switch. The saw guard assembly is equipped with safety curtains. The material is pressed with two point presses. This is an efficient saw, it has an infinitely adjustable feed speed in the range of 0 -28 cycles/min. The saw is often used to manually cut out defects in the material. net price invoice va

Condition: used, Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 2292119S535, Michael Deckel S22 turbo 5 axis tool grinder / Michail Deckel S22 trubo 5 axis toolgrinder machine Used / used Dujbu E Houwtl Hj Apet More info please call the operator Magyar / German language

Year of construction: 2002, Condition: excellent (used), datas as a plate no:660150 Dusbu E Hsmxkyre Apet

Condition: used, Year of construction: 2006, operating hours: 99,999 h, Functionality: unexamined, Rice robot with changing system for holding different tools. Previous use as a grinding robot -Swivel table with workpiece holder on both sides -Automatic tool change Dsbu E H Aergrhgspjut -10 stations for tool holder 5-axis robot System is no longer under power

Condition: excellent (used), Used Universal (cylindrical and internal) Grinding Machine BU 16 TOS with equipment, 2018 reconditioned. Excellent condition. Tested under power. Ready to delivery, installation and work. Complete offer on request. Grinding lenght: 320 mm. Grinding diameter: 160 mm. Dobsd At N Eou E H Apsut Internal attachment with spindle.

Condition: ready for operation (used), Sanding length 800 mm Sanding width 350 mm Sanding height 350 mm Total power requirement approx. 5.5 kW Automatic depth feed Automatic cross feed Duebu E Hju Aht Nj Apet Machine weight approx. 2,600 kg

Condition: refurbished (used), Grinding wheel diameter 600mm Duobjh Ix Hvou E H Apjt

Condition: new, Year of construction: 2025, center height: 315,425 mm, grinding wheel diameter: 750 mm, grinding diameter: 630,850 mm, grinding spindle speed: 1,000 rpm, overall weight: 17,000 kg, Main technical data : Swing diameter mm 630-850 Distance between centres mm 3000,4000,500 Standard wheel size (diameter x width x bore) mm750/570 x 100 x 305 Maximum wheel width mm 100 Peripheral wheel speed m/sec 45 Wheelhead swivel (°)+10/- 30 Dusbepy A Iqju E H Apot Workhead swivel (°)90 Tabel swivel (°)+6/-4 Workhead spindle speed, infinitely variable RPM 8 – 156 Workhead sleeve taper bore Morse 6 Tailstock sleeve taper bore Morse 6 Minimum programmable increment : in axis X /related to diameter./ (grinding wheelhead) mm 0,001 in axis Z (table) mm 0,005 Maximum weight of workpiece Workhead motor kW 7,5 Wheelhead motor kW 22 Total power demand of machine kW 45 - between centres kg2 500 Weight of machine with standard accessories kg approx 17 500 Dimensions of machine approx. mm 12 000 x 2 980 x 2 200

Condition: ready for operation (used), Functionality: fully functional, grinding length: 350 mm, type of input current: three-phase, High-precision tool grinder Weinig Rondomat R960: - Production of profile knives from a blank according to a template. - Resharpening of straight and profile knives in the cutter head Grinding unit Mandrel: 40mm and 50mm Solid spindle carrier with precise guides for concentricity of less than 5/1000mm. Mechanical radial adjustment for different grinding wheel diameters. The grinding wheel is adapted to the shape of the styli by a pivoting dressing diamond. Grinding spindle with cone holder for fast and repeatable grinding wheel changes. Grinding wheel diameter min./max. 150 mm / 225 mm Grinding wheel width 2 / 10 mm Grinding wheel bore 60 mm Drive motor for grinding wheel 1.1 KW (1.5 HP) Spindle speed, 1700- 3000 rpm Grinding spindle speed infinitely variable frequency control Djbu E Hovft Sfe Apjut Grinding spindle with hydraulic clamping Grinding clearance angle: - Back clearance angle 10 - 30 degrees - Lateral clearance angle 0 - 20 degrees - for straight cutterheads, the unit is swiveled by 60 degrees Cooling system Two flexible PVC hoses guide the coolant to the back of the knife and a coolant connection integrated into the knife support cools the knife from below. This prevents overheating of the blade and loss of temperature even when sanding large quantities of material. The coolant flow is controlled by a distributor with high-quality stainless steel ball valves. Coolant tank capacity approx. 50 liters Coolant pump motor 210 watts Grinding table Precision linear floating table for manual operation. Radial table clamping with fine adjustment for manual grinding of straight cutterheads Tool holder Sturdy tool holder with clamping bracket for precise fixing of the grinding arbor. Fastening of the axial constant system. Tool width max. 350 mm Tool cutting circle min./max. 100 mm / 300 mm Machine electric Operating voltage 400 Volt (range between 380 - 420 Volt), 50 cycles

Condition: good (used), Year of construction: 2003, Functionality: fully functional, grinding length: 1,200 mm, grinding width: 750 mm, grinding height: 650 mm, table length: 1,200 mm, table width: 500 mm, spindle speed (max.): 1,400 rpm, overall weight: 8,000 kg, Equipment: documentation/manual, Viewing the machine under power Dsbu E Hevccu Ds Apeut

Condition: as good as new (ex-display), I am offering for purchase surface grinding machine FS 2045 made by Ziersch & Baltrusch renovated and modernized in our company. The grinder has a swivel electromagnetic table with dimensions of 150x450mm. Completely new electrical installation (new electrical cabinet, servo drives) and new control system with panel. Machine geometry guaranteed. The grinder is ready for installation and operation. Available immediately. Dusbspah E Seu E H Apst I am at your disposal if you have any further questions.

Condition: ready for operation (used), Year of construction: 1982, Sanding length 500 mm Sanding width 350 mm Sanding height 375 mm Debu E H Aju Ag Aiepeut Sanding spindle drive 3.7 kW Table speed 2-28 m/min Automatic cross feed 1-60 mm/stroke Automatic vertical feed 0.002 - 0.06 mm/min Grinding wheel dimensions 300 x 76.2 x 50 mm Machine weight approx. 2,800 kg

Year of construction: 1998, Condition: excellent (used), Overhauled Universal (cylindrical and internal) Grinding Machine BUA 25x630 TOS. Internal attachment with spindle. Overhauled 2020. Excellent condition. Tested under power. Ready to delivery, installation and work. Complete offer on request. Djbu E Hsf Ddn To Apeut Grinding lenght: 630 mm. Grinding diameter: 250 mm.